whoever added a "dislike" I would like to see your efforts rain sun cold wet, Kevin is creating great videos whilst earning a living

@oscarmontero5724

4 жыл бұрын

+1 In this case, more than "dislike" I call it envy

@WMCS

4 жыл бұрын

V4 ************ thanks for the support... i think you have great insight as this is my daily livelihood as well. It’s hard being a small business.... but something I really enjoy but hard work. Hope you’re keeping well your end.

@jeffmee763

4 жыл бұрын

Always a Dick out there.

@paul1e

4 жыл бұрын

how cold in UK ? i did valve check for my 690 smcr at -5 cold garage and my fingers cried a lot so respect for dis dude!!

@WMCS

4 жыл бұрын

PauL1e right now it’s averaging about 6•C... but very wet. Fingers gets numb for the first hour but then it comes back to life. Great respect to you too for tackling your repair in the cold. Really appreciate your review. Thanks for taking time to visit the channel

The best mechanic in UK ! Good job ! Thanks for sharing ! Have a nice day man !

Replacing the clutch pack on a transverse mount front wheel drive car is damned hard work. Add in doing it off axel stands and filming it - hats off! As a DIY mechanic I've only done this job once; on my 1999 Ford Puma track-car. It took me three weekends and a lot of swearing.

Definitely a young man's job doing that in the cold and wet, I like a nice dry garage.

im glad i did my 30 years when things like this were a simple task but just watching you do this reminds me how things have moved on. great job i have total respect for you.

Kevin, I Did this 35 years ago in all weathers (on easier cars with access space) I "APPRECiATE" what it is like on your own working on your knees and back in all weathers. PLEASE NOW TAKE CARE OF YOUR KNEES, mine are f-----d because of it, luv the videos Son.

@davewilliams6172

2 күн бұрын

Same here Mark....Kev... look after those knees mate...I am waiting for two new ones!

Loving the content detail at the moment Kev, keep it up!

Absolutely amazing videos hats off to you doing this sort of job in the rain and cold great work mate 👍👍

Watched a few of your vids now , fair play bro, skilled and a grafter

@WMCS

4 жыл бұрын

idiocracy is now a documentary thanks for the support and for a good review. Very much appreciated

My back is aching just watching i have done a few transverse boxes in the past and the odd rear wheel drive one hats off to you p it,people don't realise how hard it is i hope it pays well, it's a young mans game as i know from experience Arthritis in hands spine neck knees . Good Job Mate !😁😁

Great work Mate. You deserve success in life!! Nothing can stop you. From New Zealand.

Its a proper mission even on a Ramp let alone on a Hydraulic Jack..Hats off to you Mate..

Thanks for the Video. Hopefully they pay you right regarding your amazing and hard work.

This guy is the Stig with a ratchet,,,amazing to watch reminds me doing similar 35 years ago,,but no where near as quick,,,a pretty unique and enigmatic guy

One of our subscribers sent me over to you because we do mobile as well, GREAT to meet another mobile repair shop!!

@WMCS

4 жыл бұрын

Astral Auto Repairs that’s really nice that you took time to send over a message. Really appreciate it. Just looked at your channel and your videos are impressive. I’m a fan already .. thanks a lot for the support

@OnlineAutoRepairVideos

4 жыл бұрын

@@WMCS You got it, and hopefully one day we can do a live stream in the future!!

@WMCS

4 жыл бұрын

Astral Auto Repairs that sounds great. ... definitely let us know when you think the time is right. ...

J'aime trop tes vidéos, continue à nous montrer ta bonne mécanique bravo a toi chompion 🙏🙏🙏👏👏👏merci pour tout

@WMCS

2 жыл бұрын

Merci Jean et bonne annee

More epic work here good job man

Who else watching this video now in 2024 😊 Thanks Brother Cheers

@WMCS

5 ай бұрын

Thank you 🙏🏽

Excellent job I followed your video on the mini and found it a massive help is there any major differences doing this job on a juke with the same 1.5 engine

Que buen trabajo, saludo desde Argentina.

Супермастер без подъемника без ямы молодец личная уважаю таких мастеров в дороги ниям не подъемников не найдёшь всё класс я сам также работаю мне не надо яма не подъёмник не легче лежа всё это делать

big respekt to you my man one day i hope ill be as good as you :)

@WMCS

4 жыл бұрын

chocos901021 thanks a lot for the feedback. Better get going then mate ..😁. I’m sure you’ll catch up soon enough.

great vidio enjoyed it. just glad I don't have to do those jobs anymore. good luck man.

Keep watching these Kevin , thinking I might see a new freebie from Milwaukee ..

@WMCS

4 жыл бұрын

Andy Taylor you mean Milwaukee sending me a freebie ... I doubt it but if that ever happens. I’ll give them an honest review...

Great filming mate

Outstanding kevin, fair enjoy your videos.

Clearly looks like a renault engine ...nice job

another good video ,does not look easy ,always think i will break the gear selector cables if i had to move /disconnect them

@WMCS

4 жыл бұрын

Alans Autos you’re right If not careful they come apart quite easily them gear linkage attachments... appreciate your input as always.

Fair play to u I have done many of them but wouldn't do it on the ground no money would pay for that kind of work

Nice video Kevin. Looks like you installed OEM Renault LUK flywheel and Sachs clutch kit. Is sachs kits better quality to install or it is the price? I have bad expirience with OEM renault Luk kit with juddering on clutch release. Just 30k km after full kit change with flywheel judder on half clutch release started like with factory installed one. Now I'm not sure what brand to buy/install?

hello kevin thanks for your videos they are very good and you are a professional, i would like to see if you make any alpha romeo147 or 159 thanks and greetings from spain

Great video ...balls of steel

WOW your really fast. Hope you get really many customers and get rich.

@WMCS

4 жыл бұрын

ENVER Pi not sure about getting rich. But I enjoy what I do. Thanks for supporting the channel. Very much appreciated 😁

Great video thanks for sharing👌

Amazing job bro.

Why the new flywheel and the new clutch don't look the same with the old ones? Is it normal, or there is a part filmed from another job? Thank you

Do you have any other videos apart from clutches

Great job man I did my qashqai about 11 months ago and now I have to take it apart again due to those crappy plastic bearing housing they use now they can not with stand the pressure over time so I have to replace that slave cylinder again as it threw all the clutch fluid out 😭😭

@WMCS

Жыл бұрын

Dan always go for the Sachs metal ones. You’re absolutely right. Plastic ones fail prematurely due to the heat

joints spi de bav non changés ? armement du rattrapage automatique de l'embrayage sachs non effectué ? purge de la butée hydraulique ?

Great job

ده سخوش ئيشئ جوانه

Good job I like it.

Hope you stop for a lunch break dude! A good bath with radox is needed after that day my friend 👍🏻

@OnlineAutoRepairVideos

4 жыл бұрын

Thanks for letting me know about this channel, it's GREAT to meet another mobile repair shop!!

@WMCS

4 жыл бұрын

Northerner 137 lunch break is a luxury out here 😁... I don’t usually stop until the repair is complete and I’ve been paid 😄.... but I do drink plenty of water tho. Hot bath every night goes without saying. that’s a must ...hour long soak. 😆 Thanks for input on our forum and for visiting our channel. Much appreciated

It's a hard life working on your back it's your neck muscles that take the strain .most of the people watching couldn't change a light bulb without 4 meetings and a spread sheet just to discus what is a clutch lol

beau travaille courage a toi t ai un très très bon mécano surtout dehors par terre sous la pluie courage courage que dieu te protege salut de la France

@WMCS

4 жыл бұрын

you adel merci beaucoup pour l’encouragement et aussi pour visiter le video. Que dieu beni toi aussi. Merci encore

A pseudo-renault! Thanks! Well done! And even better, saving time by shooting two birds with the same shot: gearbox and right driveshaft at the same time! Impressive!! Some questions: why OEM DMF this time? Maybe it is better quality? Or it just was at hand? It is really annoying how you manage to record video and use ratchet with DMF and clutch with so little space. By the way, are you using two cameras at the same time? Thanks a lot!!

@WMCS

4 жыл бұрын

Oscar Montero it’s definitely a Renault engine under there. Actually same engine and gearbox as my work van All repairs I use OEM parts except this one came in a more fancy box ..lol. Some cars I can leave the driveshaft in. Especially Japanese cars ... as there’s room to reach the bolts. In fact if I could reach all the bolts easily I’d happily leave that side driveshaft in. No it’s only one camera. So I had to do a double take to show what was happening Hope the videos are good

@oscarmontero5724

4 жыл бұрын

@@WMCS I meant the Genuine Parts Renault box. I thought (and I think, it is original, not aftermarket). Yes, the double view as the gearbox was going out and then in, was definitely a good point for this video, together with the DMF change. Keep going on! Many thanks!

Great ,thanks

Sorry bother you again I'm halfway there should be ready to split tomorrow,, I want to remove the flywheel for testing do I have to remove starting motor,, 🤔

cracking job mate great video

@WMCS

2 жыл бұрын

Thanks for the feedback

@johnfrew9032

2 жыл бұрын

@@WMCS any advise for my Renault koleos clutch 2x4 think its a engine out job

Thank you!

@WMCS

4 жыл бұрын

juan Catalán glad you enjoyed the video

big respect ...

All my respect, off the hat !!!!

@WMCS

4 жыл бұрын

Zoltán Gyáni Thankyou for the feedback

Top Dude.

Hello Kevin,need help,am fitting Nissan qashqai dci 1.5 Diesel flywheel,is there any mark I should consider ?

Hi. Does anyone have the torq spec for the clutch and flywheel for a quasqai 1.6 dci

Qual pistola elétrica você usa?

Respect😮👍💯

Good morning!! great tutorial, I have a question. to submit to you, when reassembling my clutch on my nissan quaskai, 1.5 dci 2010; 2014; I happen to have installed a bimass bag. here is my question: is it normal that the flywheel does not turn manually during assembly: I have not yet mounted the clutch Thank you for answering me

@WMCS

Жыл бұрын

It’s not suppose to turn. You should only have a small resistance movement from side to side no more than 1/4 inch.

Thank you

Was the original clutch by Sachs?

Hi thanks for the upload... I do like to like something , I’ve a similar vehicle and have the same problem of flywheel, I removed and place it back but the car won’t start , so is there anything that needs to be done to flywheel like calibration or something , please help

@WMCS

3 жыл бұрын

The only thing that will stop the car from starting will be the cranck shaft sensor. Change that for a new one and you should be on your way.

@WMCS

3 жыл бұрын

Or double check it’s properly connected.

You deserve a medal. And you didn't say c×nt once!

@WMCS

4 жыл бұрын

always right thanks for taking time to leave a review. Much appreciated

Why do you remove the reverse switch (assume that’s what it is) when you’ve unplugged it anyway? Just about to whip one of these off.

@WMCS

2 жыл бұрын

So it doesn’t accidentally snap off when manoeuvring the gearbox about.

good job👍👍👍

Hi there, just like to ask if you already use the TRANSMECH brand from euro car parts specialy the concentric slave cylinder? Many thanks

@WMCS

2 ай бұрын

False economy. Not worth it. 🍻🍻

I have the same motor 2013 6 speed Qashqai would you know If they suffer from a rather heavy clutch pedal to depress ? Or is that a sign of a worn clutch or would bleeding the clutch make the clutch pedal lighter ? Cheers for any advice on this matter 👍

@WMCS

Жыл бұрын

Definitely a sign of worn pressure plate.

Alright buddy got a nissan quashqai +2 1.5 dci gone into limp mode had dpf regen changed air intake pipe as split eml light still on now white smoke on cold start no power at all any ideas turbo gone ???

@samcorbett3099

Жыл бұрын

Any help would be massively appreciated please

good job.

bom trabalho muito bom mesmo top

That gearbox is wet isn't it?

Good job 👏👏👏👏👏👏

@westawesta9063

4 жыл бұрын

Sorry for my english i am french.but l can tell it s very good job the man don t speak in their vidéos but he is veryyy veryyyy efficace and it s all people want to see

👍 👍 👍 👍 👍 👍 👍

Does the engine need re timing after new flywheel install or am i overthinking lol? Ive changed the clutch & flywheel and just have to bleed the system and fill gearbox with oil etc. Im an overthinker lol do i need to turn engine by hand or just start it up after everythings completed?

@WMCS

3 жыл бұрын

No timing required. But avoid spinning the flywheel clockwise ...

@dermotsmyth6641

3 жыл бұрын

@@WMCS thanks mate. All back together again and running fine. Bleeding clutch on these are a pain compared to clutch with non consentric slave lol

Subscribed 😊👏👍

Wow guy.... wow..

What's the hardest clutch change you've ever had to do?

@Salmonleap2023

7 ай бұрын

I don't think any clutch is hard to do for this man, every single tutorial looks as easy as the rest, BUT only when he is doing it 😂😂😂😂

Super!!!!!

@WMCS

4 жыл бұрын

Pavel Furman thanks for taking time to leave a review.

You should get yrself a battery ratchet so handy

hi brother, clutch aligment tool plastic or metal ? . Thanks.

@oscarmontero5724

4 жыл бұрын

I bet it is PVC. I have it seen in some car stores. About 10-20eur

@WMCS

4 жыл бұрын

subutay2011 yes it’s PVC plastic. About £10.

If I may ask. What was the mileage on this vehicle when you replaced the DMF? And what brand was it? I know it came out of a Renault parts box, but was it a LUK or VALEO? Thanks

@WMCS

3 жыл бұрын

VALEO .,, roughly 86k miles.

Hey Kevin-Albert Williams, Which brands you suggest for Renault Scenic 3 2014y for Clutch Replacment with Flywheel? (Luk / Valeo / Sachs). Thank you!

@WMCS

4 жыл бұрын

Unlocker-Pro in my opinion LUK works best for any Renault. They are the original factory supplier so best to keep with LUK

@unlocklord5440

4 жыл бұрын

@@WMCS Thank you for quick answer! Do you also change the Slave Cylinder after changing the clutch on Renault? Thank you :)

@WMCS

4 жыл бұрын

Unlocker-Pro if it’s an external slave cylinder then no. I wouldn’t even crack the nipple to bleed it. As it’s a sealed unit. Only replace if it’s leaking in my opinion

@unlocklord5440

4 жыл бұрын

@@WMCS One of the Car Services said the top Slave Cylinder is good to change after a clutch replacment. Will check once again. Tnx!

I wonder if those people who own the cars he fixes ever clean them I saw the seats and the carpets wow . last Tim I saw interier like that the car was in the scrap yard.

I never see peaple working with craftsmen tools just normal that will show you you dont need high class tools

@jusb1066

4 жыл бұрын

In the UK you find the people that actually do work, buy tools from companies like sealey, which you can buy in many places and decent. The snap-on man never wants to turn up , and everything is so ridiculously priced but you just can't afford

This is Mega Kevin

@WMCS

4 жыл бұрын

Marijan marijan hey man. How’s things ... Hope you’re doing great on your side ... keep in touch.

Echanger kit ambreyage

Have you done 4x4 petrol? J10lift

@WMCS

8 ай бұрын

Not as of yet. Not very popular here.

@piotrwojtasiewicz3469

8 ай бұрын

@@WMCS start working on one today, its was going smooth but the bearing on the longer shaft wont go off from the aluminium bracket, so i had to takę it off together... bearing needs to be replaced but it stuck in aluminium. Oh lord

dam it always rain , double tump up man

@WMCS

4 жыл бұрын

Johan Reibestein 🌧🚿It’s my lucky cloud. Follows me everyday and everywhere 😁

ok !!!

what is the total time for the job ?tx

@WMCS

2 жыл бұрын

About 3 hrs

Another day in miserable blighty, give it a couple of months and you will be in a t- shirt and shades on 😎. 😂😂

@WMCS

4 жыл бұрын

125 SM been patiently waiting for over 8 months 😁😂😆.... it’s all good tho. Hope you’re keeping well your end.

@125sm3

4 жыл бұрын

@@WMCS All well down this way thanks. Roll on the spring & summer.

@WMCS

4 жыл бұрын

125 SM that’s great to hear ... not long now only a few more months of this lovely rain. It’s saving me having a bath in the evening tho 😁

Непроще на подьемнике все это делать, по пластунски лазить под ней

cada vez menos espacio para trabajar en los vehiculos, apenas caben las manos.

i will see Clutch Replacement from my first auto Renault R 5 1,1 litre 45 horses power from 1978 from Kevin the GENIUS

@WMCS

3 жыл бұрын

Sounds like a few horses pulling that carriage ✨🍻🍻

@marijanmarijan1073

3 жыл бұрын

@@WMCS YESSSSSSS PONNY EXPRESSSS

не бережете вы себя Кельвин и Альберт

Я когда кому-то плохо садится на шлицы вылазию из под машины покурил матом поругался потом залетает и так на всех машинах и постоянно

@olegolegov726

4 жыл бұрын

Точняк я так же матом пару раз ругнусь и все как по маслу! Может он тоже ругается но по своему)

Their is no talking..

@hassemsadiq

4 жыл бұрын

Watch and learn

@welshlyn9097

4 жыл бұрын

No talking is better,i think he is brilliant,

@rayobrien4274

3 жыл бұрын

some people I don't know. they will have him telling what the settings are on the tool's.