Check LUK Clutch kit Euro car parts - tidd.ly/3lIO7xA Check "Car parts for less" for Cheap Car parts - tidd.ly/32DneDd Clutch kit eBay - ebay.us/9EoEpi Self adjusting Clutch tool Ebay - ebay.us/iCGYCo Clutch kit amazon - amzn.to/3DAdAC3 Tools Used : Pressure bleeder - ebay.us/wirqyz Torx sockets - amzn.to/2JZb1lY Allen sockets - amzn.to/3phBT0C 1/2" Impact driver - amzn.to/38Bclps 3/8 Impact driver - amzn.to/3nb2v1i Socket set - amzn.to/36dcZXo Spanner set - amzn.to/3p8ZTDa Screwdriver set - amzn.to/38isBeR Ring Inspection lamp - amzn.to/2IeEiIN Torque wrench - amzn.to/3pvnXjQ Digital torque wrench - amzn.to/3yd8kSy Prybar set - amzn.to/3nh2t8c Copper hammer - amzn.to/3fmw2Dg Battery ratchet - ebay.us/i2ryoP Suspension arm puller bar - ebay.us/30GWMc Gear oil pump - ebay.us/ETxZLE

@opreabogdan6773

2 жыл бұрын

The luk slave is shit , it is a plastic cheap one. Mine lasted a month, save yourself time and money and buy a sachs metal one.

@johnboy1042

Жыл бұрын

How much does I cost for a new clutch on a mk7 transit

@diydaly

Жыл бұрын

@@johnboy1042 it will massively vary depending on quality of parts , labour rates etc but as a rough guide expect to pay anywhere from £900 - £1300 area for clutch kit and dual mass flywheel

I struggled to get the shift cables off, the plastic bit you twist and pull was pretty awkward to reach and mine was stuck. I tried for 20 mins then just undid the 13mm bolt and 13mm nut instead and took the whole plate/cable mount piece off the gearbox, way easier and less chance of breaking 15 year old plastic parts

hello I follow you from Italy, congratulations for the videos, they are fantastic. Keep it up it's great to follow you. I hope there are many more videos.

@diydaly

2 жыл бұрын

Thank you very much! comment is much appreciated .. always nice to get some feedback 😃 there will be plenty more content to follow 👍👌

@27:15 you have that small hose hanging in the middle of the screen, what the hell is it and where does it connect to? Is it some breather tube or something?

Need to use locktite 518 sealer around the csc before mounting ,

Hi mate I'm changing the clutch on my mk7 transit 2.2 fwd..I've got the gear box out but don't know wha clutch slave cylinder I need.or where to get it from ..thanks for the video helped me alot really appreciate it mate

Great video 👍👍

@diydaly

2 жыл бұрын

Thanks for the comment Gary 👌👍😃

Great

Brilliant👏

@diydaly

Жыл бұрын

thanks John 👍👌

Thanks for the vid👍i have a 2011 and have a bad rattling when foot off clutch but goes away when peddle pushed down is it the slave bearing rattling or something else?

@diydaly

2 жыл бұрын

Thanks for the comment , yes that sounds like the dual mass flywheel I’m afraid mate 😬

@richardwright8584

2 жыл бұрын

@@diydaly ok thanks for your info 👍

@diydaly

2 жыл бұрын

@@richardwright8584 👌👍 no probs

Hi mate. I’ve just done 3 piece kit clutch 2.4 rwd 5 speed mk7. I’ve got an issue with clutch pedal. I did bleed system out had new luk slave cylinder too. Clutch caches right before it touch the floor. Any ideas mate? Thanks in advance

@diydaly

Жыл бұрын

was it a self adjusting clutch? if the adjusting mech had been triggered that can be a symton

Is it worth putting at clutch in that van .probably need a load of welding for MOT.

@diydaly

3 ай бұрын

🤣 gotta love a rusty transit

Hi mate. Great video. Thinking of swapping mine out as 1,2,3,4 gears sounds terrible while driving.. thinking it the bearings. Hope I’m right…

@diydaly

2 жыл бұрын

Thanks for the comment , hopefully so mate 🤞👍

Fantastic vid, just don't seem to have that clutch bleed screw on my 2007 fwd 2.2 tdci

@diydaly

11 ай бұрын

👍

@charleswillard775

11 ай бұрын

@@diydaly got the rubber one actually

I'm just about to do mine so this is a massive help 😊 was that a fwd or rwd?

@samuelvincent5286

7 ай бұрын

fwd he said at the begining

@diydaly

6 ай бұрын

Fwd

A few months ago I had a clutch and solid fly fitted on my mk7 transit. A few days ago it developed a chattering that sounds like the due mass LOLZ... Chattering disappeares if I dip the clutch pedal or give a few revs. Is my single mass fly kaput? Or any idea? Cheers 🐕

@diydaly

2 жыл бұрын

definelty summit amiss but it would be hard to say exactly what until you removed the box mate, im not a big fan of the solid flywheel conversions tbh.. only the cheaper brands produce them not and they seem to suffer with a lot of issues

@UK-Blue

2 жыл бұрын

@@diydaly Cheers fella.. I booked in for service next Friday with a mechanic I like and trust... knows transits... I said if he can figure and fix for relatively cheap, I want him to do it. If it is a clutch or fly, that really wants doing under warranty, I'll have to take it to the garage that fitted it. But don't want to as such. I'll let you know. 👍👊🐕

@diydaly

2 жыл бұрын

@@UK-Blue 👍👍 hopefully you get it sorted!

Looks like a tough floor job :/ .. How many hours for a clutch in the shop?

@diydaly

2 жыл бұрын

about 5 hours at a garage mate

Hi mate do you still work on the old transits?

@diydaly

6 ай бұрын

Not too often now but still get some in

Would incorrect clutch fitting (without self adjusting tool) cause a clutch pedal to take 2-3 seconds to return up after a brand new 3pc kit/flywheel and master cylinder? It's been pressure bled so no air in clutch hydraulic system, gear change is fine, no noises, biting point good, clutch pedal is normal going down but just on engagement (coming up) its slow to return. Would appreciate any help thanks It's a transit fwd 2.2 2012 euro 5. It has a round valve I believe in the clutch line in the bulkhead btw but don't know what it does.

@diydaly

2 жыл бұрын

It shouldn’t be to do with that round cylinder , are you sure you haven’t double sealed the slave or master cylinder? It could be restricting the flow if so.. I’ve done it myself before 🙈

@Liveforeever

2 жыл бұрын

@@diydaly seals are on properly (the o rings and the longer sleeve type seal on end of flexi hose that goes into the bleeder part). Master cylinder has been changed with no difference. Flexi hose and the round valve thing have both been removed and checked for flow restriction but seem fine. I have done a few of these 2.2 fwd transits with sac clutches and never had to use the sac tool aslong as they're bolted on 1/4 turn at a time in a star pattern and not had a problem. Could it be the pressure plate with faulty fingers on not forcing the csc and in consequently the pedal back like it should? Thanks for reply btw

@diydaly

2 жыл бұрын

@@Liveforeever yeah you should be fine fitting it without the tool and it won’t cause that issue tbf .. I have had a similar fault on a 2012 mk7 it turned out to be the x shaped rubber valve piece that I’m sure was fitted into the valve / union piece where the pipe connects on the outside of the box .. it was a while ago now! But I’m sure it was a green rubber insert piece that was in correctly .. it’s was twisted on its side

@diydaly

2 жыл бұрын

It’s only really small and fitted inside the connector / valve

@Liveforeever

2 жыл бұрын

@@diydaly I'm currently removing the box again and changing the clutch for a replacement and see how that goes. Il post back to let you know for your experience. Thanks anyway

I know this is a solid Flywheel but would a failed DMF make the engine turn over incredibly slow, mine has been parked up for a few month and its turns over really slowly (like the battery is dead but its not), it was fine when it parked it up

@diydaly

Жыл бұрын

More likely the starter motor

@thatdaftscottishcarguy

Жыл бұрын

@@diydaly should have mentioned that was replaced with a new unit , a few bad earths were found and fixed bit its made no difference

@diydaly

Жыл бұрын

@@thatdaftscottishcarguy I’d try bypass the engine to body earth first see if that makes any difference , may be a faulty starter but you’ll need to do some amp check ms first make sure it’s getting a decent supply

TAHANKIOU IRMANO

@diydaly

2 жыл бұрын

Thanks again! 😁

The new Clutch is the expensived Part in this Rusty Red Bricket😂

@diydaly

2 жыл бұрын

Haha it is abit of a rusty nail with plenty of oil about! But runs a treat! Would of been nice to have had a tidier one in for the video.. maybe next time.. hahah

The luk slave is shit , it is a plastic cheap one. Mine lasted a month, save yourself time and money and buy a sachs metal one.

@diydaly

2 жыл бұрын

tbh ive never had any problems with them mate

@opreabogdan6773

2 жыл бұрын

@@diydaly maybe mine was faulty or I was unlucky but I wouldn't mount a plastic cylinder again no matter the brand on it

@Liveforeever

2 жыл бұрын

LUK and Sachs are same company, it was probably a fake, there's plenty out there apparently.

@opreabogdan6773

2 жыл бұрын

@@Liveforeever it wasn't a fake I bought both of them new from eurocarparts uk P.s. when I took my original one off it was metal and I was a bit amazed that the new luk one is from plastic but I thought that it will be fine.