Lets take a min to appreciate this man doing the ac belt with one hand.🙋‍♀️

i was about to spend a lot on a mechanic, but you show me that is actually pretty simple process so im gonna do it by myself. Thank you a lot Mike!

Wow! That's very awesome Mike. I replaced my Toyota Corolla belt, and now I'll try with a Mazda 5 (my sister car). I was pretty sure isn't the same way to do it. Thank you Mike, you posted a really helpful video.

Thank you for posting. Replaced the belts yesterday, using your advice, went smoothly!

Great instructional video, Mike! Straightforward with great tips - especially the zip tie. Thank you!

@PhotomikesGarage

3 жыл бұрын

Thank you!

Holy Toledo. Zip ties rule!

Thank you Mike - really helpful guide. I successfully replaced the drive/serpentine belt on our 2008 2.0L Mazda 5 Petrol Automatic using your guide, the belt diagram was very much appreciated. The part number for my UK based car was Dayco 6PK1310. Need to come back and install the A/C belt once it arrives, should be straight forward once I slacken the serpentine belt (which was tearing, otherwise would have waited for the A/C belt to arrive and do it in one go).

Very comprehensive video. Worked well on my 2010 Mazda 5. Thank you!

Thanks a lot for this tip. I have a stretch belt tool but because the belt runs so close to the inner wing and AC pipe it wouldn't work as it fouled them when rotating the pulley. Instead of chopping the tool down I tried this. Perfect!

Absolut great Job! Thanks so much, it really helped me a lot! Greets and Danke from Germany!

Great video nice one 👍 and one handed ✋ I remember when I replaced my belts on my e91 BMW 335 I felt really happy and excited 😆 nothing like new belts can't see why some ppl chance thier arm and don't replace things. My belt came off on the motorway due to the water pump going

This saved me a bunch of money and time. Thanks

Thans for the video. It helped me a lot. I have a Volvo with the same engine but without a tensioner. At least it is not like yours, it looks like fixed in place. It is not posible to move forward to release the belt. Now the belt makes sometimes a noise when starting.

Thank you! Saved me a lot of time and money!

Super way. Thank you Mike.Polska.

That was really easy to watch thank you I’m attempting to do the same to my car and after you explained how to do it I’m sure I can do it,,,thank you

@PhotomikesGarage

Жыл бұрын

Your welcome.

Good idea...I've seen some use a rag. If you take spark plugs out crank will turn easier also.

One handed! Very impressive. Thanks!

Thanks for sharing this very useful ide for changing belt

Thank you for the video.well done 👍🤛👏

Thanks excellent service!

You're awesome man, keep up the good work

@PhotomikesGarage

3 жыл бұрын

Thank you!

Thank you Mike that was excellent

THANK YOU, It was really useful for us

Thank you. Well explained. Will do job soon

Very good job thanks for sharing

Thanks my friend, great video 👍👍👍

Minimooooooooooooooo excellent video great video. Today. I am. Learned. Something new. Thank you. Forever and ever

Swapping both belts in the upcoming week plus AC clutch pack. This will be great as reference 😊

Thank you for the excellent tip! A lot less struggle and swearing doing this task from now on!

Hi Mike and thank you for your video! By any chance, don't you have a full video of a petrol 2L Mazda 5 Engine made pieces and after that put back again? My Mazda 5, a 2008 Mazda 5 with a 2L petrol engine, eats a lot of oil and unfortunatelly I do not have trust in car services in my city.... Do you think that's a job anyone can do? I mean, replacing the valves and so on? Thank you!

great job.. props from SoCal 👩🏾‍🦲

@PhotomikesGarage

3 жыл бұрын

Thanks!

Any other Mazda 5 videos or playlist you made. I am about to buy one to practice maintenance with my children.

Hi there thank you for the video. I just got a Mazda2 (2009 2.0L Diesel) I would like to know if it’s any different to change the timing belt on a diesel ? Also do I need to change the water pump as well. Would appreciate if you could help. Thx. Tibor

nice video...!

thank you sr for the video,amazing

@PhotomikesGarage

3 жыл бұрын

You are welcome.

Great video. Is that the 2.5 L engine ?

you're a freakin GENIUS!!! thank you...

@PhotomikesGarage

2 жыл бұрын

Thank you!

Very good

so only works with stretchy belt only? also does all kinds cars have stretch belt option?

Thanks a lot, very good video

@PhotomikesGarage

3 жыл бұрын

Thank you!

Off topic but i have an 07 mazda 5 with heat issue, have you ever had that with your 5?

Just did this today. I can verify that the zip tie (very tight) and a third hand at the top of the engine are both necessary.

@tedhancock68

3 жыл бұрын

To clarify, mine was is a 2014 Mazda 5 so the serpentine belt does EVERYTHING. No AC belt.

THX😁😁😁

Can you possibly do a 2006 2.5 vw beetle serpentine belt?

Thanks for posting this video. You saved our a$$es.

Good man with one hand , I’ll used both of mine I think 🤔 I can do it, thank you.

@PhotomikesGarage

3 жыл бұрын

You are welcome!

I have a 2009 Madza 5 manual power steering which is located where the idle pulley is located on your engine, the belt has been lost so I will like you to help me narror down the the number on that belt.

How did he pet the belt on the alternator puppy??

So finally you cut it?

Why does your AC belt look used?

Hi, I'm getting some hissing sound from that area, when I put wd40 it silences it for a while and come back again.. You reckon I need the belts changed? Belt hasn't been changed since I got it about 4 years.

@PhotomikesGarage

3 жыл бұрын

Yes , you should change the belt.

@AmZPresents

3 жыл бұрын

@@PhotomikesGarage just to update, the hissing sound is gone after I changed the battery.

Can't you just slide the serpentine over top of the a/c belt. It's plenty big enough?

Hi. Happy new year. May I ask the part number of belt you used for the ac belt replacement thanks

@PhotomikesGarage

3 жыл бұрын

The part number for the ac belt is LF50-15-908B.

@francislunod2208

3 жыл бұрын

Thank you very much!

Hot damn. I love you

@PhotomikesGarage

3 жыл бұрын

Thank you!

Tri creva mazda 5 da kupim molim odgovor za kalkulator

Awesome

That's not an idler pulley,it's the water pump pulley

at 7:34 he uses a sturdy zip tie to secure the AC belt in the 9 o'clock position, which holds it in place as he cranks the pulley clockwise to the 3 o'clock position. DIY genius...

@PhotomikesGarage

3 жыл бұрын

Thank you!

Sir Mazda 6 /2009

The tensioner has the same life span as belt and your's was a squealing should be done together good trick with zip tie though