2009 F150 Parasitic Draw-The One Where He Makes an Incomplete Call
Автокөліктер мен көлік құралдары
What's up everyone! Just showing a mobile diag I had that took my lunch money! I hope you all enjoy!
A close friend of mine is giving a $20 discount on the curien N2. Use URL: autorescuetools.com/products/...
Use discount code: VDDN2
The views here are mine. And this disclaimer is here because I no longer have a stupid cooperation forcing me to write a stupid disclaimer! I hope you enjoy the video!
Пікірлер: 48
In retrospect, i didn’t do the best job explaining the actual failure. The base model cluster goes into trucks with a column shifter. The column shifter supplies a ground path for the park sense signal to the base model cluster. Because this had a floor shifter that input didn’t exist. But, the platinum cluster doesn’t require that same park sense circuit to go to sleep. Hope that better explains what i found. Just the wrong cluster installed.
100% respect. you owned up to the fact that you missed something. You did your due diligence and solved it. this is what this industry needs. Good on you
Great job PJ. Hope to see more videos in the future.
@VoltageDropDiagnostics
10 ай бұрын
Thanks Mike!
First - You well explained it the problem. Very clear and understandable explanation. Second - videos are very good even recorded with a phone. Third - i appreciate the time you give to make these FREE videos.🔧
@VoltageDropDiagnostics
10 ай бұрын
Thanks for watching!
Thanks for sharing PJ! Keep the videos coming!
@VoltageDropDiagnostics
10 ай бұрын
Thanks!
Thanks PJ and take care.
@VoltageDropDiagnostics
10 ай бұрын
Thanks!
I learned a lot from you. Please keep going this great content. Following you from the middle east.
Tough when you go and a cluster is changed and replaced with the incorrect one. But rarely is the full truth revealed until later.
@VoltageDropDiagnostics
10 ай бұрын
Yeah, this vehicle took 3 trips. Sucks because I feel like I was "right" but I ended up eating a lot of diagnostic time because I wasn't 100% right when I said the cluster was bad.
Awesome job PJ hope to see more videos .
@VoltageDropDiagnostics
10 ай бұрын
Heck yeah! Thanks for watching!
Not surprised to see Texans help on a truck as Texas might be #1 state in truck to cars ration lol.
@VoltageDropDiagnostics
10 ай бұрын
Yeah, I know a lot of amazing techs from Texas!
Super common for the micro switch on the floor shifter to go bad and keep the cluster alive because it doesn’t think it’s in park. You can buy the micro switch places so you don’t have to buy the whole shifter.
@VoltageDropDiagnostics
10 ай бұрын
Yeah, but this one didnt fail. Just had the wrong cluster installed.
Hi PJ, thanks for the video! I hope you’re doing well!
@VoltageDropDiagnostics
10 ай бұрын
Yeah man! I have been doing great!
Great job. What a butt kicker 😑
@VoltageDropDiagnostics
10 ай бұрын
How the heck have you been?
Great video PJ. Video when you can.
@VoltageDropDiagnostics
10 ай бұрын
Thanks!
Great job, Thanks for sharing! I find a Gopro works well for getting videos when your mobile.
@VoltageDropDiagnostics
10 ай бұрын
I’ll need to look into the go pro!
Awesome
@VoltageDropDiagnostics
10 ай бұрын
Thanks for watching!
Thank you,your work is appreciated!
@VoltageDropDiagnostics
10 ай бұрын
Thanks for watching!
Thanks for sharing and giving us good information
@VoltageDropDiagnostics
10 ай бұрын
Whats up man! How have you been?
@DTEAuto
10 ай бұрын
@@VoltageDropDiagnostics Doing Good, just staying busy as usual. FYi, we will be going to ASTE again, I'd assume you'll be there? If so look forward to seeing you in person again!
@VoltageDropDiagnostics
10 ай бұрын
@@DTEAuto Heck yeah Ill be there! Ill cya in the lobby!
👍 QUICK-WITTED Voltage Drop Diagnostics From Nick Ayivor from London England UK 🇬🇧 ⏰️ 19:41pm
@VoltageDropDiagnostics
10 ай бұрын
Thanks Nick!
So why didn't the new cluster you bought work? Did you just get the same part number off of the old cluster (the wrong cluster)? On weird parts like that, I usually call in to a dealer with the Vin and get the exact part number for the truck-- and then I happily tell them never mind- because their prices are always highway robbery.. But at least then I have the actual part number I need and can cross reference to used or salvaged parts, etc. That's how I usually do it. A strange side note though- I have a 2002 F350 7.3L diesel 6spd manual 4x4 and my sticker on the door doesn't even show what kind of axle I have. (it also says it's a "incomplete manufacturing"-- so it was a cab and chassis to begin with). So I call into the dealer with my VIN and even they can't tell me what kind of axles I have on my truck. :) So it doesn't always work.
@VoltageDropDiagnostics
10 ай бұрын
So when they got the new cluster they just matched the part numbers that were on the cluster. So they got the wrong one again.
Typical the truth comes out after you have a few hours in it. That’s how it always is
Setting up a camera and keeping a focus on the task at hand, isn't easy....
@VoltageDropDiagnostics
10 ай бұрын
It really isnt! And not forgetting to film anything is the hardest part.
Where do you find vehicle part number identification? For cluster vehicle matching.
@VoltageDropDiagnostics
10 ай бұрын
You can either call the dealership, or use a website like repairlinkshop.com
@GregoryBirulkin
10 ай бұрын
@@VoltageDropDiagnostics thank you from a sixty-five-year-old mechanic.
I can see this being a real trap as a mobile. You will get way more of these cars that someone, or multiple someones have had a crack at before you even start looking at it. So you're not only diagnosing the initial complaint, but will likely have to reverse poor diagnosis practices, parts cannon, rubbish aftermarket parts etc. = Tough. But I guess you just need to be firm with charging for ALL of your time and hope to deal with shops that just leave the car for you, from the get go. You sound like you're not loving mobile life? Not looking to pry but are you not finding it better than dealer life?
@VoltageDropDiagnostics
9 ай бұрын
Generally, I LOVE mobile life I love working towards my dreams, instead of working toward unobtainable goals set by a service manager who has to hit his unobtainable goals set by a billionaire owner haha The problem is, I’m “too busy” Yeah, the flip side is worse. But it’s stressful trying to get everything done, every day.
@secretsquirrel9722
9 ай бұрын
@VoltageDropDiagnostics I'm super happy to hear that you're enjoying it, and that you're busy! It takes balls to go out on your own, and you should be super proud of having done it. I hope you can find some balance.