2008 Volvo XC90 3.2 coolant hose replacement / alternator inspection

Replacing coolant hoses due to one of them breaking and also talking about the alternator bolt that came loose.

Пікірлер: 24

  • @iancorcoran9107
    @iancorcoran91077 ай бұрын

    Thank you for your video , I have the same coolant pipes to replace and your video has already saved me a lot time working out how to proceed.

  • @baron9897
    @baron9897Ай бұрын

    Thanks for the video, man.

  • @seshachary5580
    @seshachary55802 жыл бұрын

    very educative. Thank you Regards

  • @g-mansbunker3718
    @g-mansbunker37182 жыл бұрын

    The plastic hose coupling that goes into the engine block you had pointed out @ 00:20. Difficulty here finding just that part. Should we find just that part. Good to go.

  • @reginaldking3272
    @reginaldking32724 жыл бұрын

    Ryan R. (2011) 3.2 L Serpentine belt and water or (coolant) pump has good info if you haven't already done the work.

  • @cengizarici
    @cengizarici3 жыл бұрын

    Thank you for your video. I have 2009 XC70, 3.2 non turbo like yours. I have small leak, after watching your video , I will have to replace all coolant hoses. I have 196k miles, I am debating is my radiator needs a replacement. How old /miles your XC90?

  • @dallasedwards4260
    @dallasedwards42602 жыл бұрын

    Question the plastic clamp that runs into the watter pump . I bought a new one and replaced it but still leaks . Dosnt seem to have a good grip to lock on . I did noticed that it dose twist to lock on but still leaks what am i doing wrong. 🤔 any help would be appreciated 🙏

  • @EduardoRivera-mq2hi
    @EduardoRivera-mq2hi8 күн бұрын

    Hello there thanks for your video do you have a part number by any chance.

  • @MrNordpole
    @MrNordpole3 жыл бұрын

    Hope you read this, How do I release the light grey plastic clamp what is in the front of the engine ?

  • @patricksecord1447

    @patricksecord1447

    2 жыл бұрын

    Also curious about this

  • @beaugarrett6472
    @beaugarrett64723 жыл бұрын

    At the beginning of the video you were talking about your original problem being the plastic fitting on your engine block. I have the same fitting broken on my lr2. Am having trouble finding a replacement. Could you please tell me what that fitting is called and where you purchased it? Thanks

  • @patricksecord1447

    @patricksecord1447

    2 жыл бұрын

    Try Atlantic british.

  • @xyphosverax
    @xyphosverax2 жыл бұрын

    In regards to the first, small coolant hose that you replaced, that goes into the engine block. Does the O-ring go on the end of the plastic piece or does it go into the block first. Mine was also in pieces so I'm not sure. I installed it on the plastic piece but the coolant still leaked from there.

  • @pgreenx

    @pgreenx

    2 ай бұрын

    I know im late but did you ever figure this out? Im having the same problem. Also the OE part came with a flange ring that pops off. not sure that's for shipping protection.

  • @xyphosverax

    @xyphosverax

    2 ай бұрын

    I'm sorry, but I can't remember what I ended up doing. I don't even remember making this comment.

  • @pgreenx

    @pgreenx

    2 ай бұрын

    @@xyphosverax thanks.

  • @greybeardnharg3992
    @greybeardnharg39924 жыл бұрын

    I would like to see the rest, if you have the video.

  • @davidfryer5714
    @davidfryer57144 жыл бұрын

    Hi , really enjoyed watching this . I am in the process of changing some of my hoses and was wondering , the hose that comes from the water pump how does it come off at the water pump end ? I have disconnected the bottom section regular hose clamp , removed the other hose that connects to the radiator , I was going to wait until my new hose to be delivered before attempting this as i didn't want to break anything . Good luck with the water pump , I have seen videos on that and is probably worth doing the serpentine belt at the same time . Thanks again Dave.

  • @arturolugo549

    @arturolugo549

    4 жыл бұрын

    David Fryer sorry for the late reply. That hose is a steel type from the pump all the way to the front of engine where the “T” is at. So that section wasn’t replaced.

  • @owenbooth658

    @owenbooth658

    10 ай бұрын

    Just pull it it held in w o ring

  • @romn38
    @romn382 жыл бұрын

    Hello, Please help! I have a bizarre overheating on my 08 volvo xc90 with no visible leak and no head gasket blown! There's no heat inside the car too! The coolant coming out of the coolant reservoir only when overheated... I took it to volvo, they kept it for 7 days and gave it back to saying it's going to cost $5,000+ better scrap the car or change the upper engine block cause the coolant is leaking thru the exhaust... I went to another mechanic who said there's no link between coolant hose & exhaust, he advised me to change the water pump (a guess or not?)... Was it the same kind of overheating you experienced or else? What do you advise me? Could that be a hidden hose? I will really appreciate your prompt reply because I already bought a water pump + serpentine belt & have scheduled a mobile mechanic for $400 job... Thanks! Kind regards!

  • @kylerandolph79

    @kylerandolph79

    Жыл бұрын

    Sounds like a stuck thermostat

  • @monerzz608
    @monerzz6082 жыл бұрын

    How remove manefold !!!!🤔🤔

  • @pgreenx

    @pgreenx

    Жыл бұрын

    The Volvo guy has a great video. I did it today. Took about an hour and hardest part for me was removing some electric clips