I did that job on my 05 Silverado. It’s in a very tight area, Very difficult to film. You managed to capture it, good job.

Thank you for making this video. I have had my 07 Sierra a long time and want to keep it. I watched your video around noon, decided I could it, bought the parts at 4:30, and took about an hour and half as I had to play around in order to get the original sensor loose. Got the mesh out with a snipped hanger and haven’t looked back. Thanks for a great video that ended up saving me $500 or more

Thanks so much I just bought the part and decided to tackle it after watching your vid. I was worried about the screen. But that pick thing worked great

This is the 4th video I've watched. The best one by far. Even showed us how to check and test the gage. Thanks for taking the time to make this video!!

Excellent , Excellent, Excellent. Best video for this job I've seen. Thank you.

Fantastic . I had pulled the brake booster hose off the back of the intake. I didnt see at first the red release tab thingy. I needed to use a small screwdriver to pull in or push in the red ring towards the front of the truck and the hose slipped out while i pulled on it. Your best part showing that screen being removed. Thanks for a great view.

Thorough video of a hard to see part! Fantastic walkthrough for someone like myself who needs to do this! Thank you!

Great job! I watched a lot of these videos about changing the oil pressure sensor, and this was the best one. You got a thumbs up and a new subscriber, and I'm sharing this with my son. Thank-you!

Awesome video. Thank you. By far the most informative.

Excellent video thanks for taking the time to get the video shots

Great video. Very clear instructions

Best video on this job ive seen

Great camera work!

Great video man!!! Made it so easy to understand thanks for making it!!!

Great job. You made it look like a job I can do. 🇺🇸

Helped a lot thanks bud!

The best video on this job! 👏 I

Great vidoe thanks for the help 👍

Great video!

Thanks great video!

Thank u my friend I’ll do mine right now

Thank you very helpful 👍🍻

Great video thank you a lot !!

@okcvet1st

4 жыл бұрын

Thanks for watching!

Thanks for this video your the man !!!

@okcvet1st

Жыл бұрын

Thanks!

Great video man straight to the point no bull crap.

This is definitely the best video and instructions of how to do this, thank you so much.

How does the clip come off? Of course I can't see it and I don't want to break it. Thanks

😊😊well done with explaining how to do that jab done ✅

Great video! How did you get so close to it? Creeper?

Just did this on my 2009 Suburban. I replaced both the sensor and the screen. Went from a sketchy 15-20 psi to about 50 psi while driving. Hope it works out for y’all. Tony

@jasonhilton003

2 жыл бұрын

Mine went from normal 40 to zero no beeping and no codes

My oil pressure gauge is still operational, I've replaced the sensor several times and that CEL keeps coming back about halfway through each oil change. Temps affect it too

The screen is the issue, older models like 05 and before never had it. I removed the screen on my 13 sierra and installed the new sensor by itself, been working great for 2 years already.

@Chriselchingon23

Жыл бұрын

So you think it’s better to run it without the the screen?

@Christradesshit

4 ай бұрын

Would a 2008 2500hd 6.0 have the screen? I've been reading mixed thoughts on it

How long can you ride without this part

Thankz👍

Thanks

I’m having trouble with my 1 1/16 seem to be too short

How do you unclip the wire? Is it a squeeze and release or pull and release?

@CPLBSS88

Жыл бұрын

Its a "FUCCCCKKKKKKKKK GM!!!!!" ... and not release.

What can I do if I don’t find that filter inside ?

Thank you, Thank you, Thank you......saved my bacon.

What size socket is that? Is it a deep socket. Also is it a special socket for the sensor or will any standard socket work.

@okcvet1st

Ай бұрын

It was an oil pressure sensor multi size socket. I don't remember if it was a short or taller one. Thanks for watching!

ad in the middle of a troubleshooting video. thanks

I have this truck and it is doing crank no start with 0 oil pressure and my handheld threw the code for oil pressure sensor. My question is: will this cause a crank no start

@donwold1622

Жыл бұрын

No.

I have the p0521 code saying oil pressure sensor, but my dash gauge is reading 80 instead of 0. Would that still mean a bad sensor?

@okcvet1st

Жыл бұрын

A faulty sensor can peg out the gauge. May check your wiring and make sure it looks good also.

This the same as a 07?

By chance where did you buy the socket at ?

@okcvet1st

2 жыл бұрын

I believe O'Reilly's but not 100% for sure. I've had most my tools for yrs and if I need a new one, they are normally the first place I look. If they don't have it or I have time to wait, I order a lot from Summit Racing.

Doesn’t the oil pressure gauge need to be at 40- 45 whenever you turn it on? Something still not right.

@okcvet1st

3 жыл бұрын

My opinion is getting cheap oil changes at a quick oil place is his issue. But 23 psi at idle is plenty of oil pressure, and it went up with a little rpm. I believe the factory min specs is well below that. The owner did change the oil after I changed the sensor and the pressure did go up more. I could've changed his oil but he wanted to go to his normal oil change place. People need to realize that just because you've been going to someone for years, doesn't mean they are doing what's best for you or your vehicle. I often work on vehicles that "their normal guy" can't figure out. When it's the normal guy that is the issue.

@richardfrye5780

3 жыл бұрын

Need to replace that little filter under the sensor.

What brand is that socket. I have bought two and neither will go on the sensor.

@ramonwheeler4600

Жыл бұрын

I purchased mine from Amazon

@redrum62

Жыл бұрын

bought one at oreilly for 10$

@dude-man

10 ай бұрын

Oreillys, brand Lisle part 13250

What’s the size of the socket ?

@buckwild6587

Жыл бұрын

Memory serves, 1 1/4

What size motor was this? I have the 4.8L... is it in the same spot?

@ryanbraden3626

Күн бұрын

Yes.

Will it hurt if you don't change the sensor

@victorseger6044

2 жыл бұрын

People say yes and some say no if there's no leaks and your not losing oil and the level on the stick is good you can drive it but when something really happens the motor will go toast quickly.. also if you're check engine light goes on it won't pass inspection.. because even if you clear the error code the light will pop on and you'll fail..

What happens if I drop my sensor

How come no one ever cuts that plastic piece out so you can see what you are doing? What does it do?

@okcvet1st

3 ай бұрын

I never really thought about cutting out the plastic piece. I don't normally cut things when I'm repairing other peoples vehicles. I often can't see what I'm working on, and do it by feel. Thanks for watching!

I loved your video. I have not seen anyone else remove the filter without removing the intake so yours was very encouraging. Thanks again 👍👍

Throw the screen away and install the new sending unit. You don't need the screen.

@jamesboyd8323

Жыл бұрын

Did the same thing, after cleaning the screen multiple times and then replacing it, still gets clogged so I took it out and pressure is back to normal.

@jaysautoandmore1771

Жыл бұрын

😮

Hey so my oil pressure is around the same right now But fluctuating when i press the gas and all that. Shouldn’t it mostly stay steady at like 40 psi ?

@adamcrenshaw7824

Жыл бұрын

My mechanic said that was normal for these trucks for the way it runs the oil systems.

Your opinion...Can I still run my truck for a couple of days then get this done I mean it has oil

@donbooblio8925

3 жыл бұрын

I've been running mine for months. I put earplugs in

@alexanderb8183

3 жыл бұрын

Same here... Ive been running it with the sensor out and no problems. I bought the part months ago and been hesitant to change it but after this video ima get on it asap

@victorseger6044

2 жыл бұрын

@@alexanderb8183 I know this is a late response but if you have a 6.2L your in for a nightmare of a day.. I did mine the day before yesterday and had to disconnect the vacuum and the fuel line and even then it was a pain in the ass BUT it's definitely worth the time and bloody hand .. because if you bring it to a dealer or shop they will pull the intake manifold an now that 45 dollar part is now a 600 dollar project.. it's worth the pain but I'll never do it again

@birdman3558

Жыл бұрын

@@donbooblio8925 disconnect the front drivers side speaker and it won't make that warning chime that'll drive you insane lol

@airgunsandsuch9139

Жыл бұрын

You wouldn't make it far without oil pressure.

I have a gmc sierra 2500hd 2007 and there is no screen like on your truck. Its a 6.0L

@juancho7236

Жыл бұрын

I also couldn't feel a screen in there when I tried to pull one out. I didn't have a camera to be able to see. I used a pick and couldn't find one in there. I tried to put one in but it didn't seem to fit. I replaced the oil sensor and it seems fine once again.

Put a new sensor and filter in and then change oil with Amsoil.

Disconnect your battery

why not just replace the screen? the sensor is probably fine.

@dattmuffy

3 жыл бұрын

what if i just clean the original screen? ha

@danmcgr6272

3 жыл бұрын

@@dattmuffy yeah, if the screen is clogged, the sensor can't get an accurate reading. so if you clean it, well?

Sh!t can the screen! it will always clog.

Those ### things are a pain in the ###. They fail are expensive hard to reach and shut down engines with false readings. Hidden down in a inaccessible hole they go bad at the most in opportune time. Could have put the ### thing where you could actually service it. A five dollar Chinese part for over hundred dollars to go bad in six months. Tricky to remove hidden wire connector behind useless cover. No wonder people by Japanese vehicles.

What SIZE socket !????fkkkkkk sakes

@okcvet1st

3 жыл бұрын

Well.... Its an oil pressure sensor socket that has multiple sizes within the socket to fit different size sensors. Go to O'Reilly's and tell them you need an oil pressure sensor socket and I'm sure they'll hook you up!

@Wolfmann99

3 жыл бұрын

1 1/16 on gm v8

@dnlmachine4287

3 жыл бұрын

0:35

I see you also have that obnoxious TPMS warning light that doesn't seem to ever go away! Hahaha is there NO WAY to get rid of that freakin thing?? It is mostly useless anyway!!