Sorry about the ending if you have any further questions please message me or comment
Жүктеу.....
Пікірлер: 16
@jackreeves40944 ай бұрын
Thank you man great vid
@zgeraldo842 ай бұрын
Thank you! Excellent video!
@Irregular5033 жыл бұрын
Thank you for taking the time to show this. Much appreciated.
@monkcheetah82032 жыл бұрын
Very helpful thank you!
@wolfganghokenmaier2 жыл бұрын
Thanks for the video. Did you have to replace the seal for the clutch cover case or is it generally reusable?
@bhushanmanamatya83047 ай бұрын
Hi, I’m looking to change the clutch plates on my 2011 suzuki dr200se. Do you have any recommendations from where I can get the ones that would be a perfect fit for my bike? Thanks😊
@chrisklein43662 жыл бұрын
And did you use the gasket case or replace it
@sybetronw30293 жыл бұрын
Hey Jake! Thanks a lot for the video, it was vert useful for me. I have a question I was hoping you could help me with, since there are not a lot of video’s on yt about this bike. I took my engine out a little while ago and when I put then engine back on the bike, the clutch lever wouldn’t return. There’s no tention whatsoever and it just hangs lose. Normally there is a spring that makes sure the lever returns when you let go of it but I just couldn’t seem to find one. Is there any chance you know how this is done on your bike? I just can’t figure it out so it would be a true life saver. Thank you in advance!!
@jakeclifton1818
3 жыл бұрын
Hey yes if you look up toward the headlight assembly/ front fork there is a little rubber boot covering up another clutch adjustment tumbler if you can’t find it look up dr 200 clutch cable adjustment and if that’s not it I would take the side cover off and inspect the clutch but more then likely it’s that cable adjustment. There really shouldn’t be a spring on this bike at least all it should be is cable adjustment
@sybetronw3029
3 жыл бұрын
@@jakeclifton1818 Thank you so much! Works perfectly now! Can’t expres how grateful I am!!!
@jakeclifton1818
3 жыл бұрын
@@sybetronw3029 really glad that helped man
@chrisklein43662 жыл бұрын
Jake do you know the torque spec for the outside case the ones that are all different sizes
@carloskingmancilla18582 жыл бұрын
Cuántas pastas y discos lleva el cluch. Tengo una DR200S 2015. Gracias.
@revolutiondreaming2 жыл бұрын
Hi. Did that EBC kit come with metal plates included or just fibre clutch pads? Do you think it's recommended to get a whole kit and replace everything or can you get away with replacing just the pads only? Thanks.
@jakeclifton1818
2 жыл бұрын
Yes it included the metal
@revolutiondreaming
2 жыл бұрын
@@jakeclifton1818 Thanks for the reply. Which EBC kit did you use? I see on the box it was the DRC Series, which part number is it? Thanks.
Пікірлер: 16
Thank you man great vid
Thank you! Excellent video!
Thank you for taking the time to show this. Much appreciated.
Very helpful thank you!
Thanks for the video. Did you have to replace the seal for the clutch cover case or is it generally reusable?
Hi, I’m looking to change the clutch plates on my 2011 suzuki dr200se. Do you have any recommendations from where I can get the ones that would be a perfect fit for my bike? Thanks😊
And did you use the gasket case or replace it
Hey Jake! Thanks a lot for the video, it was vert useful for me. I have a question I was hoping you could help me with, since there are not a lot of video’s on yt about this bike. I took my engine out a little while ago and when I put then engine back on the bike, the clutch lever wouldn’t return. There’s no tention whatsoever and it just hangs lose. Normally there is a spring that makes sure the lever returns when you let go of it but I just couldn’t seem to find one. Is there any chance you know how this is done on your bike? I just can’t figure it out so it would be a true life saver. Thank you in advance!!
@jakeclifton1818
3 жыл бұрын
Hey yes if you look up toward the headlight assembly/ front fork there is a little rubber boot covering up another clutch adjustment tumbler if you can’t find it look up dr 200 clutch cable adjustment and if that’s not it I would take the side cover off and inspect the clutch but more then likely it’s that cable adjustment. There really shouldn’t be a spring on this bike at least all it should be is cable adjustment
@sybetronw3029
3 жыл бұрын
@@jakeclifton1818 Thank you so much! Works perfectly now! Can’t expres how grateful I am!!!
@jakeclifton1818
3 жыл бұрын
@@sybetronw3029 really glad that helped man
Jake do you know the torque spec for the outside case the ones that are all different sizes
Cuántas pastas y discos lleva el cluch. Tengo una DR200S 2015. Gracias.
Hi. Did that EBC kit come with metal plates included or just fibre clutch pads? Do you think it's recommended to get a whole kit and replace everything or can you get away with replacing just the pads only? Thanks.
@jakeclifton1818
2 жыл бұрын
Yes it included the metal
@revolutiondreaming
2 жыл бұрын
@@jakeclifton1818 Thanks for the reply. Which EBC kit did you use? I see on the box it was the DRC Series, which part number is it? Thanks.