No video
🔩2005 Honda CRV P2646 Vtec Problems Easy Fix
This is an attempt to show you a vote failure on this 2005 honda crv, due to screen recording problems the video is not up to my standards but i still believe there is good information for you to use.
Gratitude paypal.me/HomieHektor
Пікірлер: 159
Awesome, another car fixed without replacing any parts. You’re a good man Homie. I told you you were gonna blow up congrats on 10,000 subscribers 🙌🏼
Man Homie Hektor, I've been on a binge with your videos, lad i found your channel. Im learning more about cars, thanks for what you do.
My 04 just exhibited the same symptoms and code, was really thinking I'd be looking at something like doing a junkyard trans swap because I didn't even know this thing had a limp mode governor and it felt like it wasn't going into upper gears. Thanks for including the whole diagnostic process I can run thru rather than just the fix!
Very nice diagnosis! I work close to there. Looks like you passed mount SAC. I work by temple and valley . Keep up the amazing work and hope you enjoyed your Thanksgiving.
You are a genius at diagnosing! Another great video man.
Those engines also have a passage screen that sits behind the power steering pump bracket on the opposite / front side of the engine that also gets clogged up. Strongly recommend cleaning that one as well.
@HomieHektor
4 жыл бұрын
popz 55 yeah, that’s true. We’ll get it on the next one 😎
Cheers from Scotland, and thanks, great stuff mate.
Great videos, glad i found this channel!
Really informative. Great diagnosis videos. I have been trying to watch all your videos. Your Diagnosis process is just like eric southmain auto and keith. Invaluable info.
@HomieHektor
4 жыл бұрын
MIKE CONT Thanks, appreciate that 🙏🏼
@HomieHektor
4 жыл бұрын
Eric and Keith...My Uncles 😎
Helton New to your channel. I appreciate the way you explain things on your videos. Awesome Thanks
Man, when you were checking the switch and said "man, está cabrón" I felt that
Replaced the entire valve spool assembly on my 05 accord and the issue didn't go away.
Thank you for uploading this video, my had this problem, I’m going to try to clean it , Thank you so much
Great video!
Great video, great tips. Thanks for Sharing.
New video HomieZ!!!
Thank u for being so informative and helpful! Got my sub! Peace
Excellent video all the way through,
Hey I just started watching your videos. I hope you do a lot more diagnosis. I like to learn. You should use a GoPro. It has lot of mounting option and easier to take it around
Muy buen video hektor, no tengo mucho mas que decir, creo que esta muy claro, eres lo maximo como tech,espero conocerte un dia en persona,yo amo la mecanica y me gusta un chi go trabajar en carros, y aprender todos Los dias, that why I watch yours videos, un saludo desde Ontario California #hookituphomie.adiossssss
Thanks for the info I have the same code on my Honda Crv and I'm going to attempt to clean it .... I liked and subscribed .
@theroyalone7588
Жыл бұрын
What did you have to clean?
Another great video. Hey Hector, did you get a new scanner? If so what did you get?
Great video homie. Traffic is insane.
@HomieHektor
4 жыл бұрын
Monster Squash Racing California 🚗🚕🚙🏎🚑🚚🚛🚌🚒🚌🚎🚐🚗🚗
What's good homie happy holidays to you and yourz, just stumbled upon your vids about a month ago and been digging all the content so far dawg, keep it up. I recently got back in school to make It official and love the chingon passion you got for this line of work homie. (And yeah Fuck them lame haters G keep doing you)
Great video man. Hope you do another day in the life video, they’re great. 👍🏾
Good shit, your video helped me.Keep them coming.
Excellent video thanks a lot!
Just come across your video, great video and well explained 👏. Would the solenoid valve cause poor fuel economy?. Cheers 👍
Thank you very much!!
Hola Señor @Homie Hektor quick one: I have a Honda accord 2005, that starts to vibrate and make a sorta rattling noise when I Turn on my car a/c. usually, the vibration and noise is more pronounced when i come to a halt at a red light or the car is on Park, at times the engine goes off and all the lights on the dashboard come on and I have to restart again. ¿what could be wrong here?
hi thank u share .we try fit it myself the problem.
Easy fix / 25 minute video **Me pressing play speed x1.5**
Hello Sir can solenoid and pressure switch can be bought separately ?? THANK YOU
Good vid homie
Never disappointed with your videos, when is the next giveaway??
I have a 2001 Honda prelude and it stays on only when my foot is on the gas. Do you have any advice?
Hey hektor, u have great videos bro,slot of info,thanks..I like ur cap bro,i also do alot of diagnosing, where can I get one like urs?..
@HomieHektor
4 жыл бұрын
Joe Tisi I’m working on making them available for you guys 🤙🏼 soon hopefully
Hey bro, I have a 2006 crv awd. I have multiple misfires. Replaced coil packs, plugs and fuel injectors. Oils just changed, air filter, the intake hose was cracked and i replaced that. 200k miles. It tends to tremble when I come to a stop, what do you recommend?
Appreciate you.
I love this video cause it is so down to earth!!! i just need to know is p2646 bbank 1 or bank 2
@brassmule
3 ай бұрын
This is a 4 cylinder engine so there's not really a bank. It's bank 1 here if listed on the pids.
😆😆excellent videos megusta tu onestidad
@HomieHektor
4 жыл бұрын
Eduardo Morales gracias por suscribirte 🤙🏼
Thanks bro
Nice work Homie! If you make your livin with the scanner buy ya a new one. Later!
@HomieHektor
4 жыл бұрын
larry lucas I might, just might 🤷🏻♂️
Same issue with my 05 crv. Replaced the solenoid and the check engine light and stutter came back within 5 miles. This was also done with a fresh change of oil. I’m about to pull my hair out over this issue...
@Rob-me1ic
2 жыл бұрын
Did you figure it out? I'm having same issue. New solenoid assembly and both filters cleaned. Plus engine flush and new oil.
@xbigbobsagetx
2 жыл бұрын
@@Rob-me1ic nope I gave it to my mother in law and she’s literally drove it everywhere with this issue. She just builds momentum and pulls hills with little issue. I think it’s electrical since if the oil pressure was really that low the motor would have died a long time ago by now. Iv moved on though and won’t get a Honda again.
@Rob-me1ic
2 жыл бұрын
@@xbigbobsagetx I'm having the exact same problem. Tried all the fixes.
@brassmule
3 ай бұрын
@@Rob-me1icdid you clean/replace the other vtec screen next to the power steering or replace the oil pressure switch? There can also be electrical connectors issues with the plugs to the vtec spool assembly that you replaced (and non-OE units tend to be crap)
@Rob-me1ic
3 ай бұрын
@@brassmule Old reply, but yes. I stated I cleaned them both. Ended up being water in my VTEC assembly plug. I sprayed electronic cleaner in it, and it fixed it right up.
I put a brand new one in 2006 Honda CR-V it’s still doing the same thing what should I do?
I need help. There's a sensor on the left side of the engine below the cams that has a blue connector with a blue wire and white stripe line and the black one. What's that sensor called? Someone broke that wire off the connector and I can't find one crv at the junkyard. Thanks
cheers mate.
Grasias por El video
@HomieHektor
4 жыл бұрын
Martin Gracias por mirar 👍🏼
thanks man.... peace
just FYI for anyone changing one of these out make sure you pay attention to the connections because the one on the right when you put the connector back on it can go on 2 different ways and you will think its on and connected but its not.. ask me how i know.
@brassmule
3 ай бұрын
How do you know? 😂
Great diagnosis video.
How does it get clogged? Just dirty oil?
My Hector my smart man all mine we love you baby 💕
@thedudeofshaving1749
4 жыл бұрын
Save some for me
@HomieHektor
4 жыл бұрын
Xx The DudeTech xX Hahaha 😂
@thedudeofshaving1749
4 жыл бұрын
Lmao 👍
Hi, i change the vtec for crv 2003. But when the car exceeds 120 kmph, the gas pedal is disconnected and I cannot accelerate. And the car is churn. I had to slow down. Is there a solution please
I replaced the vtec valve assy but still getting code. What am I missing??
Dope video homie 🔥🔥🔥
@HomieHektor
4 жыл бұрын
Meno 220 Gracias 🙏🏼
Hello, My 2002 CRV is losing power, limp-mode at 4k RPM's. I believe this is my issue.
Love these videos👍
@HomieHektor
4 жыл бұрын
Gracias 🙏🏼
my CRV dies when I take my foot off the accelerator. What can it be?
Why my 05 cr-v has the bar type? This video it looks like a brick? The Honda Accord videos has the same as my CR-V?
My car has the same code BUT it has the WARM UP before it does the HOP HOP HOP !! The OIL has to warm before that screen restricts the flow - the V-Tech turns ON at 19 PSI Oil Pressure !!
That hat!!! I want one!
You Rock Homie Hektor o_o ^_^
Hector, my 13 CRV just started to get that rattle when you started in the morning , I guess it’s the VTC actuator, is that supposed to trip a code. And is there anything I can do for it to go away like cleaning the screen or anything like that please respond thank you. By the way don’t you hate haters they should just go away
Make the mechanic hoodie black with white or red letters 💯
Hello Homie; My 2005 CRV has a very poor fuel economy at 11MPG.. Manufacturer average is 22MPG. 105km trip took 21.8 liters of petrol... Changed the Airflow sensor, plugs are fine... In your experience what needs to be done to fix this issue?
@ThatDIYguy403
Жыл бұрын
Check your rear brakes. Sometimes they drag and need servicing.That was an issue with my 2002 CRV
I have 2006 accord, do u know if I can access to those bolt from the passenger wheel side? It's important to unbolt from the top.
@HomieHektor
4 жыл бұрын
zyn19910201 Not sure, but it should be pretty similar 🤙🏼
@Gevans5472
4 жыл бұрын
On my 05 Accord, easiest access is over the top of the engine
Thanks Hektor!
Gotta love the haters either way they watching so that's just another view keep doing your thing hektor
LOL, Chingadera sure sounds better than thingamabob! Hektor, I have that P2646 code and replaced the entire vetch solenoid/filter with a Honda one, and also changed the vtec strainer behind the tensioner. Has that ever happened to you? what else can I try?
@brassmule
3 ай бұрын
Oil pressure switch just below the vtec spool assembly that you replaced, and confirm your electrical connectors to the spool assembly are good. Sometimes they get corroded and a new pigtail is required.
Hey I have the same missfiring problem and I bought new solenoide but it is still missfiring. What do you think might be the problem ?
@HomieHektor
2 жыл бұрын
Something else…
Same shit happen to me when I was trying to replace my Honda distributor the want 400 for little Distributor Ignition Control Module and the distributor itself was 200 Ahha
Hektor when the oil is too dirty the VTec doesn't operate properly....
Can u show what problems for crv too much smoke coming out from exhause
@gw5479
3 жыл бұрын
Could be head gasket... A lot of times more smoke means either burning oil, or burning coolant.
Min 2:21 " donde estas cabron "lol great video brother, Viva la Raza, I definitely will subscribe.
those guys with the thumbs down most likely work for McDonalds or Burger King, cause you know they don't have enough sense to even change a spark plug.
لا يوجد كهرباء في مأخذ vetc ما المشكلة
Easiest access is over the top of the engine
4-year old video and I found it because I have this same issue. Was the cleaning a lasting fix, or did he eventually have to replace the assembly?
@Forkeytv
22 күн бұрын
Did you end up fixing the problem? If so what did you have to fix?
@MadMonk67
20 күн бұрын
@@Forkeytv I had to replace the assembly. That and a fresh oil change to make sure the oil flowing through it was as clean as possible.
Viteecx kaç devirde devreye girer
Where are you located
bro I replaced this piece 3 times within 3 months it clogs again . I don't know what to clean or check for I changed my oil and oil pan the last time I did this idk what else to do
@MakeItHappen223
3 жыл бұрын
You ever find the fix?
Where you get that hat
Does this work for the Honda Element?
@brassmule
3 ай бұрын
Same engine, so yes.
What vtec solenoid would you recommend buying?
@charlescooperderose8872
Жыл бұрын
Try the one that's for your vehicle.
I spent so much money and still getting the code. Started with overheating and blown head gasket. Codes be bouncing. I don't have a virus d10 :-( Need a honda man.
Cool Beans
On Odyssey K24 you have to get it from underneath .
@CLUBBY261
Жыл бұрын
got mine out from the top
Do you save fuel when VTEC doesn't engage?
@brassmule
3 ай бұрын
You have to drive like Grandma with slow acceleration, keeping it at or near 2500 RPM before shifts, which limits your top speed... So yes, you save fuel lol. Not a great or safe way to travel routinely, as you cannot "mash the gas" without severe engine bucking that'll wreck your motor mounts and possibly damage your drive train components.
Thanks for the video. The same codes p2646 and p2647 and I put a new part (vetch switch) but the problem is not fixed. What other suggestions you have for me? Thank u.
@josenazario4316
3 жыл бұрын
Same problema me...fixed..
Change the part the light is on again
Rip to hectors job man
@HomieHektor
4 жыл бұрын
clayton 💀
Sometimes just changing the oil fixes the problem lol in most cases i usually get whole unit with both sensors not much price difference really.
Sell me that scanner 😂
@HomieHektor
4 жыл бұрын
phil holbrook too expensive 😎
We’re can I find a vacuums diagram
@HomieHektor
2 жыл бұрын
Maybe Hoover or Dirt Devil… 🤔
Fresh kicks homie were do you work at i have some work for you i live in cali to shoot me your info
@HomieHektor
4 жыл бұрын
Avid Diaz DM me on Instagram, I’m in Pomona
Sir where do you live
@HomieHektor
2 жыл бұрын
My house 🏡
I have a Dodge Charger 2010 and the steering wheel got a little hard does anyone know what can it be. ?
@BDONG-ob1gc
4 жыл бұрын
jonathan blanco - Need to check power steering fluid
@jonathanblanco7355
4 жыл бұрын
The power steering fluid is good and I did a flush and is still the same
@angelisone
4 жыл бұрын
Take out those O-Rings and replace them from the Power Steering Pump. Replace also the Low Pressure Hose that goes into the Power Steering Pump. Make sure the Power Steering Reservoir's Filter is cleaned.
ur from sgv? cool
@HomieHektor
4 жыл бұрын
Marki7n Pomona 🤙🏼
Yoo hektor