This van was overheating, fans not coming on - relay was bad, check it out before you replace the fans
Жүктеу.....
Пікірлер: 44
@pescs334 Жыл бұрын
Hey man nice video! The walkthrough process was perfect. Didn't over explaining everything taking forever, yet enough details for anyone watching to get it done. Wish they were all this simple. Appreciate your time and contribution
@robertthomason89059 ай бұрын
2006 caravan. Ramming into a trailer hitch. Radiator/Transmission-cooler AC Condenser of the EGR valve. Alternator and AC connectors. I replaced radiator,condenser, fan assembly. Thanks to youtube videos like yours. I disconnected the AC. Hot wired the dual fan unit. Took the top off a EGR at pullapart. Runs great. Temp is just left of center. 5 volt modulate pulsed signal was a big learning curve for me. I am going to try today. Thanks for the caveman skilled mechanic like myself.
@michaeldodgin7672Ай бұрын
Thank you for doing this video, now I know what to look for 😅
@michaelmorris6575 Жыл бұрын
Great video! Thanks for sharing.
@DanielSchaefer-jw5tt2 ай бұрын
Best most well explained video I've seen on this subject thsk you[
@gordcraig4050 Жыл бұрын
Follow the instructions. It was a bad relay bought a new one for $70 works perfect thanks
@mayaleon266
Жыл бұрын
got mine for 33😂
@MPKenney20002 ай бұрын
Helpful, thank you very much.
@TheJimmydan6710 ай бұрын
nice video...how ever it looked like you were not on the correct pin at the last part when you commanded it on with the scan tool and showed the light working....looks like you were on the regular ground and NOT the signal wire
@rockyramire333
2 ай бұрын
I thought so to he has to get a better angle to see it clearer
@jorgemora71907 ай бұрын
Great job thanks
@williamlancto9180 Жыл бұрын
I'm getting a non constant power to the relay..any ideas?
@alphakapparho7372 Жыл бұрын
Thank you
@kevinmetcalf63712 жыл бұрын
Thanks
@agcobileboqwana9923Ай бұрын
@Hooptues Garage, which scan tool are you using?
@HooptiesGarage
Ай бұрын
Launch v431
@rileycpo3 ай бұрын
Great video. I changed out my fan assembly, fan relay and it worked for a day. I noticed when I went to work the fan didn’t kick off and my battery was dead when I went to start it after work. Have any thoughts?
@HooptiesGarage
3 ай бұрын
Might be a faulty/stuck relay even new they can be junk
@rileycpo
3 ай бұрын
@@HooptiesGarage I was thinking that as well. Could that cause the fans to stay on after it’s been shut off?
@DROPCITY122 күн бұрын
what is the tool at 4:49 ? i replaced the fuse and relay, that cleared my code with the FIXD app and scanner, but the fans don't kick on. I want to see if I can jump the connection to test the fan.
@HooptiesGarage
21 күн бұрын
Power probe
@jdustan11 ай бұрын
ty for the video. what about if only one fan is kicking on? For my van, the condenser fan comes on but the engine cooling fan doesn't. No issues with overheating, but AC doesn't get as cold when it is really hot outside.
@HooptiesGarage
11 ай бұрын
I would check and see if that fan bad. Put 12 volts to it and see if it runs
@jdustan
11 ай бұрын
@@HooptiesGarage mechanic said it was getting voltage but wouldn't turn on. The fuses checked out fine.
@HooptiesGarage
11 ай бұрын
@@jdustan if the fan is getting power down at connector to fan and it won't turn on then the fan motor is bad
@JRoRosiak2 жыл бұрын
What about the coolant temp sensor? Doesn't it play into the equation?
@HooptiesGarage
2 жыл бұрын
Yes it can its helpful to have a scan tool with live data to monitor the temp and see if what it's reading makes sense
@allenchow-dc6br Жыл бұрын
What scan tool can I buy ?thanks my van is dodge caravan 1999 v6 3.3
@HooptiesGarage
Жыл бұрын
Really depends on your budget both autel and launch make scan tools that start about $200 or so on up
@lastjob848210 ай бұрын
Where do you get the jumper cables from?
@HooptiesGarage
10 ай бұрын
I got a collection of them on Amazon. You can make your own but they are cheap online
@lastjob8482
10 ай бұрын
@@HooptiesGarage do you have links for it. I just have the same problem but can’t them
@iluakavj225 күн бұрын
Are relay switches expensive?
@HooptiesGarage
24 күн бұрын
Depends usually not too bad
@Auckie85 Жыл бұрын
What scan tool is that?
@HooptiesGarage
Жыл бұрын
Launch v431
@trxpem77892 жыл бұрын
So I did the bypass and the fans kick in bought a new relay and still won’t work ?? What do u think it is
@HooptiesGarage
2 жыл бұрын
You may not be getting a signal from the HVAC control on dash, time to get out a test light and start checking.
@Tengs27
2 жыл бұрын
Did you figure out whats wrong with it, Im having the same problem.
@trxpem7789
2 жыл бұрын
@@Tengs27 after I drove the car I shut it off and turn it on and it automatically started working don’t know what’s happening
@davestorm6718
Жыл бұрын
@@trxpem7789 It's a Chrysler. lol!
@juliennebrendadevos60047 ай бұрын
The fan should turn on when you run it long enough
@HooptiesGarage
7 ай бұрын
They won't turn on if you have a bad relay like shown in the video
Пікірлер: 44
Hey man nice video! The walkthrough process was perfect. Didn't over explaining everything taking forever, yet enough details for anyone watching to get it done. Wish they were all this simple. Appreciate your time and contribution
2006 caravan. Ramming into a trailer hitch. Radiator/Transmission-cooler AC Condenser of the EGR valve. Alternator and AC connectors. I replaced radiator,condenser, fan assembly. Thanks to youtube videos like yours. I disconnected the AC. Hot wired the dual fan unit. Took the top off a EGR at pullapart. Runs great. Temp is just left of center. 5 volt modulate pulsed signal was a big learning curve for me. I am going to try today. Thanks for the caveman skilled mechanic like myself.
Thank you for doing this video, now I know what to look for 😅
Great video! Thanks for sharing.
Best most well explained video I've seen on this subject thsk you[
Follow the instructions. It was a bad relay bought a new one for $70 works perfect thanks
@mayaleon266
Жыл бұрын
got mine for 33😂
Helpful, thank you very much.
nice video...how ever it looked like you were not on the correct pin at the last part when you commanded it on with the scan tool and showed the light working....looks like you were on the regular ground and NOT the signal wire
@rockyramire333
2 ай бұрын
I thought so to he has to get a better angle to see it clearer
Great job thanks
I'm getting a non constant power to the relay..any ideas?
Thank you
Thanks
@Hooptues Garage, which scan tool are you using?
@HooptiesGarage
Ай бұрын
Launch v431
Great video. I changed out my fan assembly, fan relay and it worked for a day. I noticed when I went to work the fan didn’t kick off and my battery was dead when I went to start it after work. Have any thoughts?
@HooptiesGarage
3 ай бұрын
Might be a faulty/stuck relay even new they can be junk
@rileycpo
3 ай бұрын
@@HooptiesGarage I was thinking that as well. Could that cause the fans to stay on after it’s been shut off?
what is the tool at 4:49 ? i replaced the fuse and relay, that cleared my code with the FIXD app and scanner, but the fans don't kick on. I want to see if I can jump the connection to test the fan.
@HooptiesGarage
21 күн бұрын
Power probe
ty for the video. what about if only one fan is kicking on? For my van, the condenser fan comes on but the engine cooling fan doesn't. No issues with overheating, but AC doesn't get as cold when it is really hot outside.
@HooptiesGarage
11 ай бұрын
I would check and see if that fan bad. Put 12 volts to it and see if it runs
@jdustan
11 ай бұрын
@@HooptiesGarage mechanic said it was getting voltage but wouldn't turn on. The fuses checked out fine.
@HooptiesGarage
11 ай бұрын
@@jdustan if the fan is getting power down at connector to fan and it won't turn on then the fan motor is bad
What about the coolant temp sensor? Doesn't it play into the equation?
@HooptiesGarage
2 жыл бұрын
Yes it can its helpful to have a scan tool with live data to monitor the temp and see if what it's reading makes sense
What scan tool can I buy ?thanks my van is dodge caravan 1999 v6 3.3
@HooptiesGarage
Жыл бұрын
Really depends on your budget both autel and launch make scan tools that start about $200 or so on up
Where do you get the jumper cables from?
@HooptiesGarage
10 ай бұрын
I got a collection of them on Amazon. You can make your own but they are cheap online
@lastjob8482
10 ай бұрын
@@HooptiesGarage do you have links for it. I just have the same problem but can’t them
Are relay switches expensive?
@HooptiesGarage
24 күн бұрын
Depends usually not too bad
What scan tool is that?
@HooptiesGarage
Жыл бұрын
Launch v431
So I did the bypass and the fans kick in bought a new relay and still won’t work ?? What do u think it is
@HooptiesGarage
2 жыл бұрын
You may not be getting a signal from the HVAC control on dash, time to get out a test light and start checking.
@Tengs27
2 жыл бұрын
Did you figure out whats wrong with it, Im having the same problem.
@trxpem7789
2 жыл бұрын
@@Tengs27 after I drove the car I shut it off and turn it on and it automatically started working don’t know what’s happening
@davestorm6718
Жыл бұрын
@@trxpem7789 It's a Chrysler. lol!
The fan should turn on when you run it long enough
@HooptiesGarage
7 ай бұрын
They won't turn on if you have a bad relay like shown in the video
@juangranados363
Ай бұрын
When should the fans turn on