2004-2008 F-150 3rd Brake Light Replacement to LED
Main reason 3rd brake light was replaced from stock to LED is because it was leaking really bad leaving smell and stains in the truck. Also LED makes it look cool!
Жүктеу.....
Пікірлер: 39
@dominatortv Жыл бұрын
They aren’t fitting were the light bulbs go I’m pushing hard too
@castreat5 жыл бұрын
You skip the most important part and that was the install of the new light connection, they don't fit unless you have to remove something or push hard and easy.
@joshramirez5825
4 жыл бұрын
So did you get them connected I’m still wondering how ya got to fit them!
@andywheeler63832 жыл бұрын
Yours is the best installation video out of four I watched! Thank you!!
@thayes8314 Жыл бұрын
You skipped the most important part dude
@loganterrell74405 жыл бұрын
i have the same light insert. i am having trouble getting them connected. it will not fit, how did you do it?
@juanagudelo4099 ай бұрын
Got the same ones, they dont fit.
@JavierPadron6 жыл бұрын
People dont us a drill to install. Hand screw em, he even said u can break it if over tighten duh....
@calwilson38416 жыл бұрын
Just a heads up , my 3rd Brake lights gaskets leaked on my 2004 F150 and a friend of mine instead of spending money on a new light just because of a failed foam gasket . I came across an awesome suggestion from someone who was nice enough to post his solution to the problem which was to go to Home Depot and purchase a pkg of 3 16 th Closed Cell Foam Stripping with the adhesive backing. All I did was carefully removed the old OEM gasket then I cleaned the area with Rubbing Alcohol . I cut the new Closed Cell gasket strip to length and carefully applied to the original 3rd Brake light housing with having the 2 ends meet at the middle of the bottom of the housing and reinstalled using a screwdriver being carefull not to over tighten and then by collapsing the new gasket foam more than necessary . Save some Money...
@thewilltofix6932
6 жыл бұрын
Cal Wilson thanks for sharing this suggestion. In my case, I found some inexpensive 3rd brake light LED online so I wanted to upgrade.
@calwilson3841
6 жыл бұрын
You are quite welcome ... Happy New Year ...
@Cyfer135
5 жыл бұрын
I did something similar, except I used silicone. A bit messy though.
@uptone12111
4 жыл бұрын
@@thewilltofix6932 Problem with aftermarket lights it they fade fast
@gkcamden9050
4 жыл бұрын
@Nite Knight You can spray on Rustoleum clear coat with UV protection and anti-yellowing.
@TheArtbdw3 жыл бұрын
Thanks, made it simple and easy to install.
@michellegoodrich71154 жыл бұрын
My lights are fine on my 2004, very slight leak if it rains hard. However, a strong wind ripped off the clear plastic cover and it broke. All I need is the cover!! Can't find one anywhere.
@Ben_Lorentz
Жыл бұрын
The whole assembly is like 23 bucks for OEM halogen on Amazon.
@leticiajanethvargas27564 жыл бұрын
I have installed the same one but the middle spotlight does not turn on. only those on the shore
@bvicgvegas5781 Жыл бұрын
Anyone know what size the 2 screws holding the assembly in
@dragracer47752 жыл бұрын
No way I'm using a drill because the plastic is very fragile. Hand tighten with screwdriver only.
@Papirrin-di8cy Жыл бұрын
Mine came only with the center cable 🙁
@alejandrovalenciamonsalve90425 жыл бұрын
Hola, amigo me gustaría comprar un stop de estos. Donde lo puedo conseguir. Muchas gracias.
@luismejia2515
5 жыл бұрын
En Amazon...
@brendalittrell22125 жыл бұрын
Thank you for sharing this video.. What a great help this was for me! :)
@kjohnson16256 жыл бұрын
Hey I have a question, I purchased the same light and Im having trouble installing it, it wont go into the plastic part easy. Its kind of like im stuffing it and its still not fitting. I ended up taping it. Was I supposed to take something else out. Like other than the light bulb......
@thewilltofix6932
6 жыл бұрын
Hi Keneisha Johnson, once you take the bulb out of the socket there nothing else to take out. Led connectors should plug right in. Which of the connector you had trouble with?
@jorgesalvador60493 жыл бұрын
Es lo que estaba buscando
@uzifromtwitter52575 жыл бұрын
I wanna buy you a beer now, that you bro!
@microbusss4 жыл бұрын
what you gonna do with the old one?
@alejandrovalenciamonsalve90425 жыл бұрын
Hi, friend, I would like to buy one of those. Where can I get it? Thank you very much.
@andreyzanko6682
5 жыл бұрын
Amazon, or eBay also sells this brake light
@brendenbrenden54582 жыл бұрын
Skipping the most important part
@fast2k2876 жыл бұрын
Hi) where u was buy this LED light?
@andreyzanko6682
5 жыл бұрын
Amazon, or eBay also sells this brake light
@mr.boostang20645 жыл бұрын
So basically if the third brake light leaks then you get water on the inside of the truck? I ask cuz I have a explorer sport trac with a similar design and I have lots of water coming in at the rear.
@annettegarcia1950
5 жыл бұрын
Yep!
@fish2day918
4 жыл бұрын
@@annettegarcia1950 i had to remove drain plugs on bottom of passenger rocker panel 2008 F150 STX.The water had filled up wiring channel,popped off floor carpet trim it was FULL..
@annettegarcia1950
4 жыл бұрын
@@fish2day918 eeeew! That's not good!
@NormTuck085 жыл бұрын
I installed this on my 05 yesterday , now I dont have cruise control anyone else had this issue ?
Пікірлер: 39
They aren’t fitting were the light bulbs go I’m pushing hard too
You skip the most important part and that was the install of the new light connection, they don't fit unless you have to remove something or push hard and easy.
@joshramirez5825
4 жыл бұрын
So did you get them connected I’m still wondering how ya got to fit them!
Yours is the best installation video out of four I watched! Thank you!!
You skipped the most important part dude
i have the same light insert. i am having trouble getting them connected. it will not fit, how did you do it?
Got the same ones, they dont fit.
People dont us a drill to install. Hand screw em, he even said u can break it if over tighten duh....
Just a heads up , my 3rd Brake lights gaskets leaked on my 2004 F150 and a friend of mine instead of spending money on a new light just because of a failed foam gasket . I came across an awesome suggestion from someone who was nice enough to post his solution to the problem which was to go to Home Depot and purchase a pkg of 3 16 th Closed Cell Foam Stripping with the adhesive backing. All I did was carefully removed the old OEM gasket then I cleaned the area with Rubbing Alcohol . I cut the new Closed Cell gasket strip to length and carefully applied to the original 3rd Brake light housing with having the 2 ends meet at the middle of the bottom of the housing and reinstalled using a screwdriver being carefull not to over tighten and then by collapsing the new gasket foam more than necessary . Save some Money...
@thewilltofix6932
6 жыл бұрын
Cal Wilson thanks for sharing this suggestion. In my case, I found some inexpensive 3rd brake light LED online so I wanted to upgrade.
@calwilson3841
6 жыл бұрын
You are quite welcome ... Happy New Year ...
@Cyfer135
5 жыл бұрын
I did something similar, except I used silicone. A bit messy though.
@uptone12111
4 жыл бұрын
@@thewilltofix6932 Problem with aftermarket lights it they fade fast
@gkcamden9050
4 жыл бұрын
@Nite Knight You can spray on Rustoleum clear coat with UV protection and anti-yellowing.
Thanks, made it simple and easy to install.
My lights are fine on my 2004, very slight leak if it rains hard. However, a strong wind ripped off the clear plastic cover and it broke. All I need is the cover!! Can't find one anywhere.
@Ben_Lorentz
Жыл бұрын
The whole assembly is like 23 bucks for OEM halogen on Amazon.
I have installed the same one but the middle spotlight does not turn on. only those on the shore
Anyone know what size the 2 screws holding the assembly in
No way I'm using a drill because the plastic is very fragile. Hand tighten with screwdriver only.
Mine came only with the center cable 🙁
Hola, amigo me gustaría comprar un stop de estos. Donde lo puedo conseguir. Muchas gracias.
@luismejia2515
5 жыл бұрын
En Amazon...
Thank you for sharing this video.. What a great help this was for me! :)
Hey I have a question, I purchased the same light and Im having trouble installing it, it wont go into the plastic part easy. Its kind of like im stuffing it and its still not fitting. I ended up taping it. Was I supposed to take something else out. Like other than the light bulb......
@thewilltofix6932
6 жыл бұрын
Hi Keneisha Johnson, once you take the bulb out of the socket there nothing else to take out. Led connectors should plug right in. Which of the connector you had trouble with?
Es lo que estaba buscando
I wanna buy you a beer now, that you bro!
what you gonna do with the old one?
Hi, friend, I would like to buy one of those. Where can I get it? Thank you very much.
@andreyzanko6682
5 жыл бұрын
Amazon, or eBay also sells this brake light
Skipping the most important part
Hi) where u was buy this LED light?
@andreyzanko6682
5 жыл бұрын
Amazon, or eBay also sells this brake light
So basically if the third brake light leaks then you get water on the inside of the truck? I ask cuz I have a explorer sport trac with a similar design and I have lots of water coming in at the rear.
@annettegarcia1950
5 жыл бұрын
Yep!
@fish2day918
4 жыл бұрын
@@annettegarcia1950 i had to remove drain plugs on bottom of passenger rocker panel 2008 F150 STX.The water had filled up wiring channel,popped off floor carpet trim it was FULL..
@annettegarcia1950
4 жыл бұрын
@@fish2day918 eeeew! That's not good!
I installed this on my 05 yesterday , now I dont have cruise control anyone else had this issue ?