2003 Maytag Performa PAV2360AWW Repair Part 1: Disassembly
Ғылым және технология
In this part I disassemble, and inspect the machine to access the failed bearing. Not a difficult job, just time consuming. Should be the same for many of these one belt Herrin platform machines.
It appears most parts are discontinued for these Herrin machines. Go ahead, and get parts while you can!
Parts, and tools I used:
W10219156 Hub seal, and bearing kit, or MAYTAG 21002237, Use OEM, the aftermarket is junk.
Y056016 Center Seal Grease
DT22002922 Suspension Spring Removal Tool
DT22002898 Seal Nut Removal Tool
35-2968 Spanner Wrench
Optional, to go back to older design setup:
21001533 tub nut, and seal. NLA, difficult to find.
12001598, old tub, and bearing kit, NLA, difficult to find.
Spin Bearing p/n: 35-2205
I had to mix, and match on my machine to make the kit work.
Thanks for stopping by to watch, please like, subscribe, and ring the bell!
#diy #fix #repair #maytag #performa #herrin #pav2360aww #2003
Пікірлер: 13
Man, what a job to disassemble that! Even a pro couldn't do it that well.
@dynatrak
11 ай бұрын
Now if I can remember how it all goes back together!
Super job on disassembly! I would be subbing the bearing for a ceramic hybrid.But that is just my idea. 😜
@dynatrak
11 ай бұрын
Thanks! I'll have to see if ol' Doc Brown can swing by to take me back in time, to get that done. Perhaps next time this service needs to be done, I can have one on hand, and ready to go!
Much appreciated, keep up the great videos
@dynatrak
11 ай бұрын
Thanks, will do!
Am I right thinking this washer has a plastic inner tub? Never thought Maytag used them but it sure looked like one. I only thought the 2000’s GE washers had them, which I thought was a pretty good design, being impossible to rust, dent, or coating to chip off.
@dynatrak
11 ай бұрын
Yes, it is a plastic inner tub!
Nice work but would you able to get a 3rd washer if you have enough room like portable direct drive or belt drive washer that is smaller only if you have enough room
@dynatrak
11 ай бұрын
Thanks! No more room for additional machines.
@amazinginterstate95ownbtcp84
11 ай бұрын
@@dynatrak alright, you can upgrade the inner tub into stainless steel tube to make it look nice and shiny
@dynatrak
11 ай бұрын
@@amazinginterstate95ownbtcp84 Plastic tub will be staying. That's an unnecessary upgrade.
@amazinginterstate95ownbtcp84
11 ай бұрын
@@dynatrak well alright but thx for the video stuff I use to have that Maytag model HAV and it broke because it had several leaks and it replaced by amana topload washer