Youve done this, start showing us how to install cams

@dizzy8950

6 жыл бұрын

ltwargssf R Fr tho

@mikedugan671

5 жыл бұрын

i don't think they know how

@jetjoey19

5 жыл бұрын

Its esay, order cams from mhs or cms and have them degreed, drop em in and ur golden, tune to follow installation and enjoy

@biggregsparks8364

5 жыл бұрын

@@jetjoey19 I think the order is messed up, lol.

@CarminesRCTipsandTricks

5 жыл бұрын

@@biggregsparks8364 Either way installing Cams on a 2-Valve is EASY!!

Finally a build that more than 5% of teenagers will be able to afford.

@eliamorales9159

5 жыл бұрын

Chido

@jarred281

5 жыл бұрын

Build? 😆😆😆

@dre04mach

5 жыл бұрын

@@jarred281 vinyl wheels and tires... it's fully built brah!

@tylerross3847

5 жыл бұрын

@dre04mach you clearly didn't watch the entire video....they modify almost everything performance-related on this car. It's actually pretty complete while still being affordable and purely bolt-on. Sue it's still slow, but they checked all the boxes with performance, handling, grip, power, acceleration, braking, etc.

@halflife103

5 жыл бұрын

@@jarred281 your truck has what? Wheels, tires and a tune?

Hoping to see an updated 99-04 bolt on build up!

@phillipberk5767

7 жыл бұрын

Me too haha. But with higher quality parts and less u know basic things every single person does.

love the 2v sound

@americanmuscle

7 жыл бұрын

Honestly the 2 valves will always be one of my favorite sounding engines. -Justin

@ninevoltmodz4687

5 жыл бұрын

Mike Haggar wrong

I think I might get me a 04 gt I have a 2012 v6 but lately I been really falling in love with the way the new edge looks

@CarminesRCTipsandTricks

5 жыл бұрын

I agree with that... The New Edge is smaller, lighter, and the 2-Valve exhaust actually sounds like a V-8!!! The later ones are too high note and raspy... .... AND 2005-earlier cars DON'T have drive-by-wire. Your Car CAN'T be controlled by an outside source! Not being radical, just the truth.

@angelgjr1999

5 жыл бұрын

@Flikt 5.0s are faster but they wont last as long and are heavier so handle worse. Get a 4.6 instead and mod it.

@ncp61398

5 жыл бұрын

fuck a v6 dawg, spend the money. get a v8.

@eddielombera5862

5 жыл бұрын

cheif465 as someone who owned a v6 first and jumped to an ‘02 gt, save up and get a 5.0. You’ll eventually want more power and the 4.6 doesn’t do it. Bolt ons aren’t worth it since they won’t do much, only a supercharger will really wake it up and that’s at stock 5.0 territory.

@eddielombera5862

5 жыл бұрын

Flikt terminators are the new edge worth getting, other than that 2011+

3.27 gears one of my top 3 favorite things about my 99 COBRA!!!! that 5th gear cruzier is so nice when not racing but want to go 100mph at 2300 rpms baby is just purring at low rpms that OP 2nd goes to 80mph for stop light to stop light + 4th goes to 155+mph for freeway racing when you need to let the beast loose!!!!

@carlosvelasco4119

5 жыл бұрын

Is it really that much of a difference in from 327 to 355 my 4 tops at 125

"Now let's get back to the shop to see how these blacked out lights help with our 0-60 times"! On second thoughts, let's head to the tattoo parlor for some sweet tribal tatts. That aught to be some kick in the pants fun. Yeehaw!

@jamesa6272

4 жыл бұрын

Michael Hughes the autozone special gas cap added 10 hp to the wheels

@thetrader5235

2 жыл бұрын

cry about it

I wish yall would do a bolton buildup of a mach 1

@ronalddixon3159

5 жыл бұрын

They can't because parts are getting obsolete. Can't even get a dang throttle cable.

I remember "project foxbody" and it turned out great, would love to see you guys do another one. That would be awesome.

there are so many more improved parts that have come out since this video was made a few years back.

@americanmuscle

7 жыл бұрын

Good eye- yes this video was made LONGGGGG ago. :) -Justin

@CQBCARMINE44

6 жыл бұрын

This video was uploaded 9 months ago

@dougcbr954

6 жыл бұрын

FordMan8801 really I'm thinking of picking one up this year

@darthjohn0

6 жыл бұрын

The car's inspection stickers are dated to 2011.

@MeMyselfI_69

6 жыл бұрын

LOL hasn't been that long

I had one of these in college. A top loader hurst shifter to boot. In ways, it was more fun than my corvette.

You guys need to do a video on how you got that paint so nice. Guaranteed there is no way it looked like that when you got it

@canadianrcs9931

4 жыл бұрын

TheUsmc1488 check out chrisfix. He’s got a tutorial on how to super-clean paint.

like bolt on builds like this...keep em coming

I have a 2640lbs prelude that's cam'd and tuned but I can't wait to pick up a 2v this up coming year. Its going to be a 1/4 mile build.

"these drag radials made it dead hook on the street" but it spun tho......

@americanmuscle

7 жыл бұрын

It was probably the soft a$$ burnout I did prior to that particular 'launch'. Trust me, those meats have no problem hooking on the street with all of that 190+ wheel horsepower that 2 valve is putting down. (I'm obviously kidding about the power) -Justin

@gabevalentine8359

7 жыл бұрын

those 4:10s will have you spinning into crowds and be unusable for highway conditions. go with the 3:73s.

@carter123cbq

6 жыл бұрын

Gabe Valentine if you don’t know don’t comment. I daily my 03 gt with 4.10’s just fine. Runs closer to 2500 at 100 kph but if you want efficient, don’t build it faster.

@jacksonhikes1344

6 жыл бұрын

Carter Quibell YES MASTER

@dnsbb8033

5 жыл бұрын

Carter Quibell it is only a GT though

I was wondering with those 305s tires out back did you all have to fender roll or modify your mustang to get them to work

What type tires/dimensions was on the car before changing to the drag radials?

do you have any throw back bolt on build up kits that are for the 1999 v6 3.8L non GT models?

my mechanic just ordered a Cai, o/r x pipe, flowmaster 40s, and a tuner! COME ON SUMMAH!

AWESOME VIDEO!!! SUBBED!!! KEEP 'EM COMING!!!

Is there an actual video of these parts being installed?

reminds me of my first car. I had 01 laser red gt. I think I had all these mods and then some. Brings back memories

@americanmuscle

7 жыл бұрын

Glad you enjoyed it Ernesto! Did you replace it with different Mustang? -Justin

@evillela2001

7 жыл бұрын

AmericanMuscle.com Oh yeah I got a 07 GT now with plenty of parts from you guys. just saving for that supercharger. almost there

@CarminesRCTipsandTricks

5 жыл бұрын

...... Ahhhhh the good old days. My first New Car was a 1982 GT!! 😲😎

I wanna see you upgrade parts on a 96-98 svt cobra :)

Anyway you can show some of the styling builds with convertibles?

Car looks and sounds so good

amazing mustang!

I love new edges and I've never really been a muscle car guy. Kinda want to pick up a Mach 1 since they've gotten decently cheap. Maybe settle for a clean 5 speed GT!

@exstessyy2361

Жыл бұрын

Man how I wish we could still say Mach 1’s are decently cheap lol

@RidinDirtyRollinBurnouts

Жыл бұрын

​@Exstessyy hahahahaha sucks. No more $8,000 mach 1s for you, so glad I never sold mine it's worth way more than I paid for it

Perhaps you can show us how to replace the ac compressor?

Can you guys do a stage 2 cams, headers, 4:10 gears and a cold air intake before and after a tune want to see what my car is capable also do a dyno run something new for those 2valve owners like me thx!

@voided76

5 жыл бұрын

They should be doing a stage 1 LS swap on a tired V6 fox4 mustang using an adapter for the T45. That's where it's really at.

@markball7028

4 жыл бұрын

Michael Spence like an LS swap hasn’t been done a million times in nearly every vehicle under the sun. It would be more interesting to see a forged bottom end 4.6 with the CNC 190cc trickflow 2V heads and a 80mm turbo.

@halogod0298

3 жыл бұрын

@@markball7028 why spend more money for an inferior engine

@markball7028

3 жыл бұрын

@@halogod0298 why have the samething everyone else has? Out of the gate the LS is cheaper. But once you start spending money on aftermarket heads and forged bottom end the cost isn’t a whole lot different between the two. I find it more fun, challenging and surprising to see a 4.6L 2v underdog to run mid 8 sec 1/4 miles than a run of the mill LS. Its rather boring to have the same thing everyone else has.

@halogod0298

3 жыл бұрын

@@markball7028 How are you gonna call the LS boring when mustangs literally came with 4.6s? Everybody has one because they are the best. If the 4.6 was better it wouldn’t be getting thrown out by hundreds of mustang owners.

I’m in love with this car😍😍 Is it for sale??

My 04' Convertible 4A used to rip off 0-60 times in 5.8-5.9, and that's over around a dozen tests with a second dude in the car with a stopwatch. You gotta do 0-60 on a flat surface! Haha

are you able to recalibrate the speedometer with the bama tuner?

@CarminesRCTipsandTricks

5 жыл бұрын

Yes.

I have a 02 Manual so what do I do to get better gear ratio on it will the same thing u used in this vid work?

@Panchitoisdead714

4 жыл бұрын

3.73's

So with 4.10s in the automatic does the topspeed in overdrive increase more than with 3.27s?

@mike88g1

2 жыл бұрын

No, limits it dramatically

will these fit a mach 1

I have a new edge gt and a 2014 BMW 335. The Bimmer is better in every way(sooo much faster) but one, the sound. It’s the only reason I didn’t sell the mustang.

How much for the suspension pack ?

So how much was the total cost on all the parts..

I have a 2000 Lx. The first thing I did was add the swaybars. As the LX did not come with a rear swaybar. And then a cold air box. It is still a work in progress. As I live in Wisconsin it is to cold to work outside this time of year. -30 below wind chills tomorrow. YUCK!!!. So I stock up on parts in the winter.

.7 increase is actually pretty damn good

barely got me a coyote engine finna swap it on my 1989 mustang

if I’m trying to make some cheap power... I already have an exhaust and low friction pulleys.. my GT has 75,000 miles on it and I am trying to restore/add to the power. What should I do?

@Buttah5k824

4 жыл бұрын

Jack Brouillette cams built engine you can swap a Eaton super charger you could spray it there’s a lot of options bro

@canadianrcs9931

4 жыл бұрын

Gearsssss

Looks good

You probably should change out those chrome bolts that secure the pony emblem for the grille delete with black bolts.

I love that mustang a lot. I would keep 2 One original One all customed out

@jdigitalseven7

4 жыл бұрын

Most of these new edges look good..but rattle alot on inside and are slow. They just sound mean. Better off to coyote swap or buy a mustang with a Coyote at least in it.

Still drive my 99GT daily. Prepping it slowly for a coyote swap.

@matthewhartup941

7 жыл бұрын

ppmguire Go for it! I bought a new F150 sport with a coyote engine. I am shocked at how much power the new truck has and how it gets down the road for a truck it's size. Today I installed a magnaflow exhaust with resonator delete and it sounds badass. I have owned two stangs, a 93 GT and 97 GT... I will have another mustang one of these days. And it will definitely have a coyote 302 under the hood!

@ppmguire

7 жыл бұрын

Yea it'll come. All I have left to do is upgrade brakes and fuel pump then have a new K member ready and I'm good.

Do s197 next guys you're awesome

@americanmuscle

7 жыл бұрын

We actually did shoot a specific S197 'Bolt On Build Up'! You can find that on our site. -Justin

If i were to put 3.73 in my 03 mystang gt will i need new spark plugs to go with the gears

@CarminesRCTipsandTricks

5 жыл бұрын

.... And new windshield wipers too!! Go to AutoZone.

@Panchitoisdead714

4 жыл бұрын

@@CarminesRCTipsandTricks 🤣🤣🤣

About how much did it cost in total

Is that stock suspension?

Why is that hood different than mine? I have stock hood? I have an 02’?

dream car

What kind of red is that?

if i did this i would want to help with the build so i can take some credit for it too

Wish ur shop here in uae

What’s the wheel specs though?? Offset?? Width??

finally something that fixes mustang sway lmao if you know what i mean

The best sounding mustang motor probably ever made after the OBD2 standards

The Laser Red paint is GORGEOUS on that car!

@angelgjr1999

5 жыл бұрын

Yeah I want to buy one. They are going up in cost though. :(

4.10s are great for drag racing, but you'll be turning high rpm on the highway. I'd rather go with 3.55 or 3.73s for every day.

@Jaxen90841

6 жыл бұрын

And, what kind of gas mileage can you expect? My 4.6/ automatic/ 93 tune is disappointing with 3.31s.

@jetjoey19

5 жыл бұрын

@@Jaxen90841 with overdrive, you wouldn't see the gas mileage difference, i did it to my 07 f150 reg cab and maybe 200 rpms higher than 3.55s, gas mileage is unnoticed

@jrvbamafan1

5 жыл бұрын

I drive with 3:55s everyday and get 18 in town and 23 on the highway....good enough for me

@CarminesRCTipsandTricks

5 жыл бұрын

4.10s aren't bad - with the AOD, which has too deep of an overdrive... 5-6 speed, 3.55 or 3.73s are better.

@chrishansen7004

4 жыл бұрын

If you have enough gears you can daily 4.10s I’ve seen some video about a guy that had it on his Transam and 6th gear was actually useable then

I'd love to lower my 99 GT but with a slp catted x pipe and stock height my car already scrapes on every dip and speed bump because of the low hanging catalytic converters.

@Elver_Galarga_jugo

7 жыл бұрын

Joel Ramirez why not tuck them up a bit higher? my wife's old 02 had low hanging stock cats that dragged over anything 3" higher than flat ground when i dropped it with Eibach Pro springs. i made some alterations and managed to tuck them at the same level of the stock subframe rails (no connectors for that car). btw, found out Eibach pros for 94-04 mustangs are the same as stock 87-93 GT springs but with an "Eibach" logo and got the car pretty low without the isos. front had about a .75" wheel gap and rear a 1" with 245/45/17s on all 4 corners

@lordXguru

7 жыл бұрын

Samuel Paniagua I tucked them up as far as I can but the catalytic converters are still around an inch or two bigger in diameter than the exhaust pipes. I also noticed today that my car is lower on the driver side than the other so maybe that is what is causing the scraping if I don't be careful on speed bumps. Thanks for the info I'll surely be checking them out.

Justin, please install a sprint booster in there, & retest the acceleration numbers. I have a feeling it will be a tenth or two quicker

@americanmuscle

7 жыл бұрын

This video was shot a long time ago brother. Besides the sprint booster is for drive by wire cars, this car has a throttle cable. Either way, thanks for watching buddy. -Justin

@hmackprotection1

7 жыл бұрын

AmericanMuscle.com, cool..I didn't take that into account. Right on. Later

Looks nice except for the deck lid thing. I love this era of mustang.

I expected the two videos to be fresh stuff... oh well, skinny Justin is just as good.

@americanmuscle

7 жыл бұрын

I ate skinny Justin, he was delicious. -'Big' Justin

dude i have the same car and they also look the same. but instead of red and black mine rn is yellow and black. im going to change it soon to blue and black tho.

Classic background song from Ford Mustang The Legend Lives

Could all these parts fit my 02 v6 mustang?

@Noesandresss

3 жыл бұрын

Yes anything from 99-04

How much does this cost all together?

@Lee-np5ck

4 жыл бұрын

like 5 grand

I see a lot of comments on how affordable these bolt on mods are, but I don’t see anywhere what the total cost of everything was/is.

Cool car😀😀😀😀😀😀😀

please do one for a third gen camaro/firebird 305

@CarminesRCTipsandTricks

5 жыл бұрын

Wrong place......

How much money would all of this cost ?????

I'm not sure you know what staggered means?

Nice "throwback"!!

@americanmuscle

7 жыл бұрын

Thanks Robert! -Justin

If I wanted to take my GT and install all these mods how much would it cost me? Roughly

@canadianrcs9931

4 жыл бұрын

Fizzor thousands. Lol

@jamesa6272

4 жыл бұрын

Way more than you will ever get back if you sell or wreck it

about how much did all these mods cost all together?

@smbaker84

6 жыл бұрын

wheels/tires-1000ish+, fuel door 150ish, decklid 50ish, chinspoiler 50ish, rlca's 200ish, ruca's 220ish, ring/pinion 175ish, strut tower brace 90ish, caster plates 140ish, springs 150ish, sway bar kit 350ish, cai 270ish, 78mm tb 300ish, bama tune 400ish, xpipe 200ish, catback 500ish i say "ish" because of sales and shipping install and such.. 4500 easy there..

@tmartnnn

5 жыл бұрын

stephen baker that is far off

do s550 packs please, lots of people have those

@CarminesRCTipsandTricks

5 жыл бұрын

Just because New Edges are no longer "trendy", LOTS of people still love them! 😎😉

Probably gonna do alot of these mods

@americanmuscle

4 жыл бұрын

Nice! Best of luck with your future build and thanks for watching! -Zach

Lemme guess: 93 octane tune?

How much is this whole thing ?

I honestly thought they were doing a new bolt on build up with different parts

That guy aint fooling anyone.. we know he stole woody

Good terminology , floaty... That's excactly the way to describe the GT. Mine is definitely float. Ima try on these mods on mine. Thx

Wow!! What made you guys come up with this build? Seems like the industry was occupied by the new generation and guys like us were left out!

@americanmuscle

7 жыл бұрын

This 'build' was shot almost 5 years ago now and was deep in the archives. We just wanted to blow the dust off some of our early bolt-on build ups in true 'Throwback Thursday' fashion....we were just a day early. :P -Justin

@professorpizza69

7 жыл бұрын

AmericanMuscle.com oh my God. You actually replied...!!

@americanmuscle

7 жыл бұрын

Of course man! We never want to leave the earlier gens out, although i know it may seem that way from time to time. We did this bolt on build up series for a lot of the gens (including sn95, s197 and v6 cars as well) and will probably throw them together and re-release them as it seems you guys are digging them. (Even if I'm terribly embarrassed by my 'early' performance on video lol) -Justin

@CarminesRCTipsandTricks

5 жыл бұрын

.... I love this series! I have noticed that over the past few years, fewer and fewer 95-04 parts in your catalog... I realize some of it is Manufacturers backing out. Now I've been deep in the Car scene since about 1977, and have owned 16 Mustangs! Mostly Four Eyed Foxes... I keep my eyes on the market very sharply. AND I'm planning my LAST Mustang Build(I'm Old!!). I've always loved AM's Service and quality, and hope I can use you exclusively. Carmine 🚂🚙

Wow what a difference looks amazing

@americanmuscle

7 жыл бұрын

Doesn't it look sick!? Thanks for watching and for taking the time to comment Alex :) -Elaina

is it possible to put headers on an automatic gt?

@southernman10104

4 жыл бұрын

Gotta drop the k-member or lift the engine but yes you can do it. I recommend getting bbks. It's the only brand I know of that has a notch in the header to avoid the steering shaft. Otherwise you'll need an aftermarket steering shaft as well.

@79chevy901

2 жыл бұрын

Yes because I had one with LTHs.

Anybody know if that is laser red or Crimson red?

@12DisturbedGuy93

5 жыл бұрын

Laser

My BBK whistles at me 😁

Top 5 mustangs of all time!!! :-)

What size rims 18x?

@CarminesRCTipsandTricks

5 жыл бұрын

18x9 front, 18x10 rear, right on their website...

Does a 0-60 pull in the back parking lot..🤣🤣🤣

Wasn't there a build project for this car 3 years ago

@Elver_Galarga_jugo

7 жыл бұрын

TheDustyaman yup, this video is just all 4 of them complied together

6:49 I often see this scene in movies... What is going on with the vehicle? Why is there smoke coming out from the tire well?

@americanmuscle

Жыл бұрын

Doing a nice smokey burnout, dude! -Zach

Great video! Wish it was the 5spd though.

@musicrevelation2023

2 жыл бұрын

Sticks are definitely a lot more fun to drive but that auto will smoke any stick any day of the week in terms of shifting. But the sticks do have less parasitic loss, honestly I like the dual clutch transmissions since it's a direct gear drive but shifts as fast as an auto

@PokeTycoon

2 жыл бұрын

@@musicrevelation2023 a stock 2000 Ford auto trans would not be faster than manual. Dual clutch, yes.

@musicrevelation2023

2 жыл бұрын

@@PokeTycoon yes it is, any automatic that's 90s and up will shift faster than any human can think. A computer is much faster than you or me or anyone. Your not out shifting those Trans and I would love to see it because it's not going to happen. The 4r70w is a slow shifter but I know for a fact your not outshifting it and if you think other wise then I doubt you raced against someone with a stick because especially the Trans that are in truck have long ass shift linkaged and good luck trying to bang gears fast because it's not going to happen.

@PokeTycoon

2 жыл бұрын

@@musicrevelation2023 you should research that and make sure your facts are right.

@musicrevelation2023

2 жыл бұрын

@@PokeTycoon bruh I promise you an auto will easily out shift any stick. I think you should do the research because they all same the same thing I do. Modern autos aren't like the slow low geared Trans in the early days. Every Transmission in the 90s and up will out shift any stick, almost every professional drag racers use automatics or clutchless systems. The world records are set with autos nowadays

'Those radials definitely helped us dead hook on the pavement ' Shows him not hooking and having to get off the throttle to stop the car wheel spinning.

I legit think I came when I heard that flowmaster exhaust

Do you guys have Steven Spielberg directing videos now? im getting whiplash from all the zooming in and out..

@americanmuscle

7 жыл бұрын

This video is easily 4+ years old- I guess we're diving into the archives now to bring em back lol. -Justin

@Neondeandre

7 жыл бұрын

AmericanMuscle.com well that would explain it haha

@americanmuscle

7 жыл бұрын

+yahir rivera1890 You're telling me. We've come a LONG way in 5 years lol. -Justin

do one for the foxbody plzzzz

@Elver_Galarga_jugo

7 жыл бұрын

Angel ortega they did, its the one where they made a "Cobra convertible"

@CarminesRCTipsandTricks

5 жыл бұрын

Ya know, Ford DID make a bunch of Foxbody Coupes and Hatchbacks... You wouldn't know it if you're shopping for one. Nearly ALL Convertibles!! ...... Kids COULDN'T have destroyed ALL of them?

@angelgjr1999

5 жыл бұрын

@@CarminesRCTipsandTricks I like foxbody but they are like 30 years old so it scares me to daily drive one. Im happy with a humble 4.6

What's the colour code on that red? Thanks!

@cookiemonster9020

6 жыл бұрын

Adam D you still want the color code I know it’s a bit late but I have the same exact car but manual

@LDMco

5 жыл бұрын

I believe that's the laser red color, not the performance red. I'm not sure what the specific color code is

@12DisturbedGuy93

5 жыл бұрын

E9 laser red

you shouldn't have an x pipe. with chambered mufflers. it defeats the x pipe. rule is h pipe with any muffler. x pipe with only high flow mufflers such as stingers or borla

@phillipberk5767

7 жыл бұрын

American thunders are shitty most of flowmaster chambered mufflers aren't that great only sound good on 04 and back but with an H pipe, X pipe should be magnapacks or SLP's and Borla's like you said. Plus American thunders are too quite lol

@rcmelton0615

7 жыл бұрын

freeyourmind88 What about flow master super 10's?

@vincentrieck7687

7 жыл бұрын

freeyourmind88 Not necessarily, frankly with a mildly modified motor like this people would more likely choose the X-pipe for a better sound than the 2 & 1/2 rwhp you would gain from the H-pipe. Not trying to destroy your argument just saying that with such a weak motor people would rather have a better sound than gain hardly any power.

@hoho6185

5 жыл бұрын

you have no clue do you only little boys run stingers or borla . lmao

@Yophillips3272

4 жыл бұрын

I disagree. X pipe may sound better to some people and they make slightly more HP. The "rules" for when to use H pipe is if you like the sound better no matter what muffler you have, price, and possibly fitment.