Building a New Edge Mustang in 10 Minutes!
Автокөліктер мен көлік құралдары
Follow My Socials Here:
Instagram: / carsonchafin
TikTok: / carsonchafin
Parts on the car & my recommended detailing products.
These are affiliate links to Amazon that I make money with when purchased.
Parts
Headlights: amzn.to/3LrRMhx
Reverse Lights: amzn.to/3EUi6gB
Sequential Tail Light Kit: amzn.to/3PqQlkH
Detailing Products
Soap: amzn.to/46229AX
Wheel Cleaner: amzn.to/4532Ngg
Glass Cleaner: amzn.to/3ZpRWfa
Interior Cleaner: amzn.to/3rnvh6N
Spray Sealant/Drying Aid: amzn.to/48CDZ1Z
Foam Cannon: amzn.to/44XrLh3
Mitts: amzn.to/3rmqgLE
Microfibers: amzn.to/3LwN8z9
Leather Protection: amzn.to/3Lzeepd
Brushes: amzn.to/3Zwvmlg
7yr Ceramic Coating: amzn.to/3Zq9p7c
5yr Ceramic Coating: amzn.to/3Ptti8Z
2yr Ceramic Coating: amzn.to/3EMIcCf
Permanent Trim Restorer: amzn.to/3Lzldyu
Wheel Coating: amzn.to/3Lzqi9Q
Glass Coating: amzn.to/3t4QSBu
Panel Wipe: amzn.to/3ZzffTZ
Gear I Use
Camera: amzn.to/3GjX7Vp
GoPro: amzn.to/3t2lgwu
Пікірлер: 47
What’s your thoughts on this transformation? Thanks for watching!
Idk why, but this era of the mustangs just always hits. It’s sleek design and doesn’t look too bulky, yet muscles cars usually look like that. I love it tho and rlly want to get one as my next build
Had my new edge since I was 17 I’m 24 now and it has been an amazing car. I love the engine, not for the power, but for how bullet proof it has been. I’ve put the car through the ringer for sure. I’ve pulled out the engine, transmission (did the auto to manual swap too), the fuel tank, the head gaskets, the timing chain, the interior, and was able to put it all back together. I can’t say enough just how much I appreciate this year of mustang. Beautiful car man
@jacobean87
3 ай бұрын
Yeah my 99 just runs perfect I never have problems internally
This is one clean new edge. Very nicely done sir
@carsonchafin
6 ай бұрын
I appreciate it!
@LoganStockard
Ай бұрын
I agree
Love what you’ve done to it. Clean cruiser.
I love this we need more 🔥
Great job!!!!….. Keep going bro!!
Very nice stand and 239 to wheel is very impressive for stock
Nice mods! How much lower are the springs ? If u beat on the car or drive for short trips, think about putting 5w30 in
clean asf
Nice work 🫶🏼
like the build but i didnt see u put any caster camber plates on after putting lowering springs cant get the alignment back in spec without them
Such a sick ride man! That shit is so hard
@carsonchafin
6 ай бұрын
I appreciate it!
Nice car, but I'd recommend that you put a mild cam in there as well to be a proper build, and remove that cold air intake and put the stock one back on. That "cold air intake" is only taking away power. It's getting all that delicious 150 degree radiator air and giving you low air density.
Shooo looks good.
@carsonchafin
6 ай бұрын
I appreciate it!
WOW ! How did you change the steering wheel and overpass the airbags ? Is this even legal ?
Crazy this man pulled this off in only 10 minutes
@carsonchafin
5 ай бұрын
😂😂
Hey man where did you get that steering wheel from???
I dream to getting one soon
Whats your exhuasy setup? Is it stingers only? Or do you have a mid pipe? Ride looks 👌 🔥
@carsonchafin
6 ай бұрын
It’s just Borla Stingers as of now!
This is how I’m making my 99 look
HELLO BRO WHAT SIZE ARE YOUR WHEELS ???
Nice car, I have the same wheels at l luv em
It looks like a mustang with a twist of jdm
VERY NICE CAR.
What’s rims are they
What year? And can you send me the link where you bought the manual conversion kit cant find one myself
@carsonchafin
5 ай бұрын
It’s an 01! And the manual swap kit was bought off of eBay from MPSAutoSalvage!
Whats your wheel/tire setup? Looking for similar setup on my 03 vert.
@carsonchafin
6 ай бұрын
The front is 18/9 on a 265/35/18 tire and the rear is 18/10 on a 285/35/18 tire.👍🏼
@THEKINGMESS1
6 ай бұрын
@@carsonchafin any rubbing with the eibach lowering springs? Any fender rolling ?
@carsonchafin
6 ай бұрын
@@THEKINGMESS1nope, fenders aren’t rolled at all and no rubbing.
@mattjingles5758
6 ай бұрын
@carsonchafin what caused the tire to separate then?
@carsonchafin
6 ай бұрын
@@mattjingles5758I don’t have caster camber plates on lol. I was always going to switch to coilovers so I just never put them on since I bought them after the springs were installed. So, my car isn’t aligned properly do to having barely any camber. But those tires were on there for 3 years before it happened so I got my use out of them haha.
I got does same rims on my foxbody💯
@LovelyTuxedo-ee9bf
3 ай бұрын
What rims are they
@eselexfox
3 ай бұрын
@@LovelyTuxedo-ee9bf SVE series 1 wheels from LMR
Time for a whiney supercharger ;)
3650, trans
nice work even tough its an ugly ass toyota looking car XD