I've been trying to chase down the cause of the rich running condition of the KDX200 without any positive improvement. Until this.
Жүктеу.....
Пікірлер: 500
@mechanical_rizz6 жыл бұрын
I get excited exclusively when I see a Jenny's garage video in my feed
@caskin95
6 жыл бұрын
it happens to me as well 😀
@teetzmageetz7719
6 жыл бұрын
Yes lol. I wonder if they read the comments
@biscuits22081
6 жыл бұрын
Me too! Haha
@honda8192
6 жыл бұрын
Same
@invisiblecool7483
6 жыл бұрын
Yes me too!!
@KDAASHH6 жыл бұрын
I'm guessing the packing in the exhaust is saturated in the old oil, id suggest repacking the exhaust.
@zen_jen69336 жыл бұрын
This is honestly one of the best channels I have come across recently. Down to earth, honest bike enthusiasts! I am busy rebuilding a bike at the moment (1989 TDR180 in MX Trim), and have learnt A LOT about non-starters and where to start, what to look for, as well as how to do basic diagnostics for common issues. Things you'd never think of checking! Thanks guys!
@floastknowsmost27866 жыл бұрын
Am I the only one who instantly clicked on this.
@nil233x
6 жыл бұрын
I did too. Its been a long wait. Camera girl will you get him working harder?
@sajeevravi5950
6 жыл бұрын
I legit clicked immediately
@azurdaazurda7920
6 жыл бұрын
I was first
@rigguyjt
6 жыл бұрын
You might be the only one without a job!
@runwillrobinson
6 жыл бұрын
These guys are the best. Even when Camera Girl says she is unenthusiastic she exudes enthusiasm.
@mealex3036 жыл бұрын
thanks for this year of videos ive enjoyed thoroughly. they are not only my entertainment but have got me through dark days of massive depression. I suffer pretty bad even when alone. Merry Christmas
@robertm40506 жыл бұрын
Love your videos and especially your mistakes. They helped tremendously when my father and I spent a dozen hours fixing my furnace yesterday and today. I don't know if it was the mistakes or the sense of humor that kept the project going and got us to finish fixing the furnace and so I have heat when my new born daughter comes home from the hospital tomorrow(Christmas). Thanks!!!!
@LordOfGears26 жыл бұрын
I'm ready for the next video! Keep em coming man. I just wanna say I really enjoy everything about this channel. I know hardly anything about engines but I feel like I learn and you and your wife make a great and entertaining duo.
@oliviaburger14036 жыл бұрын
2:57"why did you put it in?" 3:00 "i didn't know it was that big"
@dion52t6 жыл бұрын
The look of joy on your face when it finally works is priceless, great video...Merry Christmas 🎅
@edemup446 жыл бұрын
It’s always a good day when there is a Jenny’s garage upload!! So excited for you!!! 🙌😀
@raymondsanchez58506 жыл бұрын
Love all of your videos can’t wait until next one
@adventuresinmopeding39706 жыл бұрын
I always look forward to one of your videos. I love the banter between you and your wife. Keep the videos coming.
@KENWIL1386 жыл бұрын
Awesome videos. I honestly love seeing a new video from you guys in my feed. Merry Christmas.
@TheMrShinagami6 жыл бұрын
Another great show and nice to finish on a high. good luck carb shopping and have a Merry Christmas and a Happy new year!
@Drolt6 жыл бұрын
I came to this channel to watch you fix this motorcycle, and you are almost done. Keep up the good work!
@harleyrider96404 жыл бұрын
It's the sweet,sweet sound of success..sounds like victory!!..great video you two!!
@christopherdorman61405 жыл бұрын
Hey boss i have to say i just recently started watching you and i fuggin love y'alls videos and the also that you and your better half do it together and trely enjoy it... Keep on making them good time memories!!!!
@myweigh70896 жыл бұрын
Awesome video. Amazing ending. Camera girl is just the sweetest. Y'all are great keep it up. Definitely inspiring to make me start doing a few projects
@MichaelMacGyver6 жыл бұрын
Congrats guys, Merry Christmas from Scotland!
@zx8401ztv6 жыл бұрын
ha ha you never give up do you :-D. Have a happy xmas :-D I would have still split it and replaced the seals and bearings, but thats me.
@Meekerextreme
6 жыл бұрын
yeah, with how many times he has taken it out by this point why not, and makes for a great video.
@SilverCanary1
6 жыл бұрын
To do all that and still have it run like an asthmatic 50 would be a waste of time imo especially as they want to use it now; the bearings in that engine were better anyway. We also couldn't feel quite how cold it was lol...
@redneckgearheadgarage495
6 жыл бұрын
No need really
@johnchafin3817
6 жыл бұрын
I guess it depends on what the goal is. To use or resale. If to use then yeah I would have replaced. Now that he knows what the real issue was go ahead and replace the seals and bearings to freshen up the motor and make it more reliable.
@zx8401ztv
6 жыл бұрын
John Chafin, yep that's the way i think, but if it was my bike and there is a chance to replace the basic stuff while the engine is bare, i would do it. Because later on it will cause problems just when you need the machine the most. That's sods law lol.
@jimjackson5096 жыл бұрын
I love watching your videos. Smart DIY stuff. And your wife is amazing for putting up with you
@leebryant20956 жыл бұрын
Please keep making your videos. Love watching them. I like you explaining you thought process. More new videos soon please.
@customer30606 жыл бұрын
These 2 are awesome love the videos such a chill vibe to it
@racerboy38016 жыл бұрын
Absolutely love these videos, keep up the great work!!
@glascojeremy6 жыл бұрын
Good work my friend!!!!! You accomplished something most wouldn't be able to in yrs withput extensive knowledge. Keep up the great informative videos.
@mantiSshymn6 жыл бұрын
Just found your channel, loving these videos. Awesome job!
@tomhudson17576 жыл бұрын
these vids are really good. i cant believe your perseverance but its really good to see it run finally!
@jenniesgarage
6 жыл бұрын
Yeah it took long enough!
@bmxdestroy6 жыл бұрын
Duuude u crack me up! I always watch your dirtbike videos. I also enjoy the jokes between you and your wife! The hair looks good man keep it up!!!
@g123a126 жыл бұрын
Love watching your videos mate Watching from the UK
@raven7206 жыл бұрын
I love watching your videos, I especially love the commentary. Funny stuff. Keep them coming.
@carlbernsen12906 жыл бұрын
Yay! It's a Christmas Miracle! Great result guys, and so nice to hear the funny banter between you while you work, camera girl doesn't have to be just a tripod! Happy Christmas!
@all_beast75286 жыл бұрын
Thank you so much for uploading good content!
@williamjohnson98956 жыл бұрын
My favorite channel. Hands down.
@saltyburrito16886 жыл бұрын
Hey I love y'all videos so much my IT250 had the same problem except the seals would go out rather quickly but I finally figured out that I was not being careful enough! Anyway I love your wife's and your videos and you both are very fun to watch keep making these project videos guys thank y'all!!!
@mute8s6 жыл бұрын
This is easily becoming one of my favorite channels on KZread.
@antonkneubuhler92066 жыл бұрын
Gday from Australia love your work and love your never give up attitude
@claytongreen27446 жыл бұрын
Hello! i just watched this and believe it or not i have the same problem with My KTM exc 300 ! i i have done everything but get a new carb! i even took it to a cycle shop paid them 300.00 dollars just for them to tell me they dont know either!! thanks alot Beach Blvd Cycles of Jacksonville Fl!😣 what a waste of money and they had it for 3 months! they changed one seal on the clutch side and it did not help. after watching your video i totally belive its the same! the carborator!!!! thanks for the videos You do👍👍👍 and You and Your Wife make a Great Team!!!!👍👍👍 love to go rideing with yall! again thank You for Your Efforts!😁
@jasonlawrence95646 жыл бұрын
Great videos. I am always waiting for the next one
@ryanmoore67956 жыл бұрын
I would have never guessed the carb to be the problem!! awesome video as always!
@maldog43036 жыл бұрын
Awesomeness you two.... 👍👍👍 Merry Christmas 🎄🎄 to your family and Happy New Year.
@nospa216 жыл бұрын
Well done guys. Love all your vids.
@beawarenow82875 жыл бұрын
Just started watching you guys ... I have loads to watch nice job
@TONYTHETlGER6 жыл бұрын
It's always the simplest thing you do last that get's it right. Great work, sounds awesome!
@snorc29396 жыл бұрын
Love these videos! Thank you!
@arkansascatdaddy51886 жыл бұрын
Y'all are good people, love your videos and the way y'all play off each other with humor. ArkansasXR650L
@BigFarles6 жыл бұрын
Love your vids. Merry Christmas.
@suzukitard6 жыл бұрын
haha heck yeah!! man ive been rooting for this project hard core. close to my heart, man. keep up the good work and BRAAP on!
@MrTeckman016 жыл бұрын
I love your vids great to see the bike fixed and you happy
@isaacmathewsmusic6 жыл бұрын
This quickly becoming one of my favorite channels.
@t.c.30275 жыл бұрын
Duuuude, U had me laughing just as hard as you were upon the completion at the end as if I had actually completed the task!!🤣😂🤣....
@jamesardilla3716 жыл бұрын
Hey man I just want to say I have enjoyed all or most of the videos you posted. Happy New year and keep the videos coming thanks
@jenniesgarage
6 жыл бұрын
Thank you, happy new year to you too.
@TheDrunkardHu6 жыл бұрын
That fix was super exciting! Can't wait to see the new project!
@WazzieShmozzie6 жыл бұрын
I knew you had this, good job for not giving up and good job all round :)
@lennycruz45586 жыл бұрын
I am your number one fan here in the Philippines🙌🙌🙌🙌 i love your videos sir, very informative, and at the same time entertaining, more power
@Jim-ie6uf6 жыл бұрын
Nice job! Merry Christmas to you and the camera lady.
@MrChomcky6 жыл бұрын
It’s ok I still smoke a little bit too.
@VintageandVoltage6 жыл бұрын
Haha, victory!!! I love your excitement! Great video!
@lilwarthog5 жыл бұрын
Don't you love just having to rip everything apart. Gotta love working on your own shit! Love the vids!!
@msarte56616 жыл бұрын
This guys really good mechanic and interesting to watch. I started watching his video and I enjoy it I hope this guy get famous. He has a positive vibes videos.
@schwall52216 жыл бұрын
Love your vids, smoke issue is probably that there is hella oil in the pipe built up, so take the pipe off and empty out the oil!
@Dronston
6 жыл бұрын
When I rode 2 stroke mopeds back in the day we would take the exhaust off, go to a sandpit or similar, poor gasoline in the exhaust and ignited it. It would usually burn the exhaust clean of oil residue. Another method was putting an old clutch cable in a drill and rotate that cable like a mad man inside the exhaust to get rid off some of the coal cake on the inside.
@MyNameIsEarl03
6 жыл бұрын
NL same and me and my dad use to use ammonia then spray the shit out of it with water... it worked though ;D
@pwn3dbyme
6 жыл бұрын
He addressed that issue
@Meekerextreme
6 жыл бұрын
You can use a MAP torch and hook up a heat gun and heat the pipe to ignite the the buildup and watch it roar, I got a video of doing it. Makes for great video.
@MyNameIsEarl03
6 жыл бұрын
Meeker Extreme I couldn’t find the video on your channel
@hockeygeek216 жыл бұрын
It’s been a while, love the excitement!
@sooriyah0076 жыл бұрын
Love it! And love you guys! Keep um coming!
@brucemanly78576 жыл бұрын
YEAH !!!!!!!! You and Camera Lady make a great team, congrats on the fix, and for having a super supportive wife..
@antidecepticon6 жыл бұрын
I REALLY LOVE WATCHING, THANKS!
@gamesbeer16 жыл бұрын
Love the vids and commentator (camera girl) keep the vids and info coming. Thanks you
@GeneralJameson6 жыл бұрын
I live your videos I was as excited as you when it fired up and ran good!
@tylerevans48606 жыл бұрын
Hell yea! I knew you'd figure it out. Nice pose at the end haha
@Paul-vl8zq6 жыл бұрын
Have a wonderful Christmas mate :) and family specially the boss lady lol
@raymondmartinez56246 жыл бұрын
Awesome. Love that feeling when things finally work
@jessesmith25606 жыл бұрын
FYI Great videos hope the best to you. Also have happy merry Christmas and happy New Year's.
@kitfisto23476 жыл бұрын
Can't wait for tomorrow when you release 10hourd worth of shasta videos as a christmas present to us :D
@CanDoo3216 жыл бұрын
I really like your videos, thank you.
@troyjenkins20126 жыл бұрын
Good work. Perseverance pays off
@joefuller34676 жыл бұрын
YES!!! awesome, good job......i want to see the new bike now!!
@7272nighthawk6 жыл бұрын
looks like a very good ray of hope glad you didn't split that case I cant wait until the next vid
@sammypotpie6 жыл бұрын
Jake, thank you for doing another sweet dirt bike. I ask you to make this one really nice, like you did the Husqvarna. I love your channel.
@alecjahn6 жыл бұрын
Hooray! I'm always awaiting the next installment in this chronicle. Also the new bike... I wonnnnnnder what it is? :D
@darreneck37446 жыл бұрын
this is seriously entertaining , i love it!
@joshmx71616 жыл бұрын
been waiting on this vid! awesome.
@krulleman6 жыл бұрын
You guys are so happy 🤙🏻 Nice 2 see
@toamataafa46476 жыл бұрын
Blessings JG Family..Merry Christmas to you and your family..GOD bless..🍸🍷cheers.
@skippymcgenkins68086 жыл бұрын
Merry Christmas. Ending is priceless
@cafenightster45486 жыл бұрын
That ending shot, was like a jumping high five still at the ending of an 80's movie, just perfect.
@johnb84406 жыл бұрын
The BEST channel
@panueldunuel74496 жыл бұрын
These videos just get better and better....
@OverlandOne6 жыл бұрын
Wow, that does sound a lot better. Nice work.
@andrewweston22536 жыл бұрын
The KDX has checked in! Niiiiiice!
@Bradwick16 жыл бұрын
What a nightmare bike, but it appears that you have slayed another dragon. congrats!
@the_mystery98036 жыл бұрын
Congrats on getting it working
@aleblanc35476 жыл бұрын
Pretty amazing...those little two strokes can be a brain tease.
@nickcsuki81236 жыл бұрын
You are a lucky guy! My girl would never reply with an honest 'Yes, I would love too' when I ask her to go carberateur shopping~!
@nicgyver83596 жыл бұрын
Nice, sounds a lot happier than before.
@jt40sti6 жыл бұрын
You got me hooked on watching Jennies Garage...how do you do that!! LOL
@jetskill996 жыл бұрын
Cant wait for the 98 kx250 vids
@cronos19116 жыл бұрын
Congratulations! Proper job! :)
@eric71796 жыл бұрын
I've never heard of a carb wearing out aside from scoring from dirt and things like that, but I guess with enough hours anything is possible. I bet new jets, float needle, and maybe float (if you think it's bad) would freshen it up though. And with how little that main seal was leaking, once everything is up to temp and expanded/softened it probably seals just fine. Been loving this series!
@Iseekoutthetruth6 жыл бұрын
I am standing and clapping for your success! and i thought it was the tire pressure, oh silly me.
@lynlynster86986 жыл бұрын
There has got to be some seals you are not seeing on the old carb you have not replaced, around the linkage for the throttle could be shaft play. Or some oring wherever the fuel is flowing. Love the vids keep it up, Also you should do some patreon on stuff so we can give you money to show us how to fix things :).
@ryanfisher64026 жыл бұрын
Wow totally different bike! Merry Christmas guys.
@sammypotpie6 жыл бұрын
Seeing a new Jennie's Garage video is like Christmas in my heart.
Пікірлер: 500
I get excited exclusively when I see a Jenny's garage video in my feed
@caskin95
6 жыл бұрын
it happens to me as well 😀
@teetzmageetz7719
6 жыл бұрын
Yes lol. I wonder if they read the comments
@biscuits22081
6 жыл бұрын
Me too! Haha
@honda8192
6 жыл бұрын
Same
@invisiblecool7483
6 жыл бұрын
Yes me too!!
I'm guessing the packing in the exhaust is saturated in the old oil, id suggest repacking the exhaust.
This is honestly one of the best channels I have come across recently. Down to earth, honest bike enthusiasts! I am busy rebuilding a bike at the moment (1989 TDR180 in MX Trim), and have learnt A LOT about non-starters and where to start, what to look for, as well as how to do basic diagnostics for common issues. Things you'd never think of checking! Thanks guys!
Am I the only one who instantly clicked on this.
@nil233x
6 жыл бұрын
I did too. Its been a long wait. Camera girl will you get him working harder?
@sajeevravi5950
6 жыл бұрын
I legit clicked immediately
@azurdaazurda7920
6 жыл бұрын
I was first
@rigguyjt
6 жыл бұрын
You might be the only one without a job!
@runwillrobinson
6 жыл бұрын
These guys are the best. Even when Camera Girl says she is unenthusiastic she exudes enthusiasm.
thanks for this year of videos ive enjoyed thoroughly. they are not only my entertainment but have got me through dark days of massive depression. I suffer pretty bad even when alone. Merry Christmas
Love your videos and especially your mistakes. They helped tremendously when my father and I spent a dozen hours fixing my furnace yesterday and today. I don't know if it was the mistakes or the sense of humor that kept the project going and got us to finish fixing the furnace and so I have heat when my new born daughter comes home from the hospital tomorrow(Christmas). Thanks!!!!
I'm ready for the next video! Keep em coming man. I just wanna say I really enjoy everything about this channel. I know hardly anything about engines but I feel like I learn and you and your wife make a great and entertaining duo.
2:57"why did you put it in?" 3:00 "i didn't know it was that big"
The look of joy on your face when it finally works is priceless, great video...Merry Christmas 🎅
It’s always a good day when there is a Jenny’s garage upload!! So excited for you!!! 🙌😀
Love all of your videos can’t wait until next one
I always look forward to one of your videos. I love the banter between you and your wife. Keep the videos coming.
Awesome videos. I honestly love seeing a new video from you guys in my feed. Merry Christmas.
Another great show and nice to finish on a high. good luck carb shopping and have a Merry Christmas and a Happy new year!
I came to this channel to watch you fix this motorcycle, and you are almost done. Keep up the good work!
It's the sweet,sweet sound of success..sounds like victory!!..great video you two!!
Hey boss i have to say i just recently started watching you and i fuggin love y'alls videos and the also that you and your better half do it together and trely enjoy it... Keep on making them good time memories!!!!
Awesome video. Amazing ending. Camera girl is just the sweetest. Y'all are great keep it up. Definitely inspiring to make me start doing a few projects
Congrats guys, Merry Christmas from Scotland!
ha ha you never give up do you :-D. Have a happy xmas :-D I would have still split it and replaced the seals and bearings, but thats me.
@Meekerextreme
6 жыл бұрын
yeah, with how many times he has taken it out by this point why not, and makes for a great video.
@SilverCanary1
6 жыл бұрын
To do all that and still have it run like an asthmatic 50 would be a waste of time imo especially as they want to use it now; the bearings in that engine were better anyway. We also couldn't feel quite how cold it was lol...
@redneckgearheadgarage495
6 жыл бұрын
No need really
@johnchafin3817
6 жыл бұрын
I guess it depends on what the goal is. To use or resale. If to use then yeah I would have replaced. Now that he knows what the real issue was go ahead and replace the seals and bearings to freshen up the motor and make it more reliable.
@zx8401ztv
6 жыл бұрын
John Chafin, yep that's the way i think, but if it was my bike and there is a chance to replace the basic stuff while the engine is bare, i would do it. Because later on it will cause problems just when you need the machine the most. That's sods law lol.
I love watching your videos. Smart DIY stuff. And your wife is amazing for putting up with you
Please keep making your videos. Love watching them. I like you explaining you thought process. More new videos soon please.
These 2 are awesome love the videos such a chill vibe to it
Absolutely love these videos, keep up the great work!!
Good work my friend!!!!! You accomplished something most wouldn't be able to in yrs withput extensive knowledge. Keep up the great informative videos.
Just found your channel, loving these videos. Awesome job!
these vids are really good. i cant believe your perseverance but its really good to see it run finally!
@jenniesgarage
6 жыл бұрын
Yeah it took long enough!
Duuude u crack me up! I always watch your dirtbike videos. I also enjoy the jokes between you and your wife! The hair looks good man keep it up!!!
Love watching your videos mate Watching from the UK
I love watching your videos, I especially love the commentary. Funny stuff. Keep them coming.
Yay! It's a Christmas Miracle! Great result guys, and so nice to hear the funny banter between you while you work, camera girl doesn't have to be just a tripod! Happy Christmas!
Thank you so much for uploading good content!
My favorite channel. Hands down.
Hey I love y'all videos so much my IT250 had the same problem except the seals would go out rather quickly but I finally figured out that I was not being careful enough! Anyway I love your wife's and your videos and you both are very fun to watch keep making these project videos guys thank y'all!!!
This is easily becoming one of my favorite channels on KZread.
Gday from Australia love your work and love your never give up attitude
Hello! i just watched this and believe it or not i have the same problem with My KTM exc 300 ! i i have done everything but get a new carb! i even took it to a cycle shop paid them 300.00 dollars just for them to tell me they dont know either!! thanks alot Beach Blvd Cycles of Jacksonville Fl!😣 what a waste of money and they had it for 3 months! they changed one seal on the clutch side and it did not help. after watching your video i totally belive its the same! the carborator!!!! thanks for the videos You do👍👍👍 and You and Your Wife make a Great Team!!!!👍👍👍 love to go rideing with yall! again thank You for Your Efforts!😁
Great videos. I am always waiting for the next one
I would have never guessed the carb to be the problem!! awesome video as always!
Awesomeness you two.... 👍👍👍 Merry Christmas 🎄🎄 to your family and Happy New Year.
Well done guys. Love all your vids.
Just started watching you guys ... I have loads to watch nice job
It's always the simplest thing you do last that get's it right. Great work, sounds awesome!
Love these videos! Thank you!
Y'all are good people, love your videos and the way y'all play off each other with humor. ArkansasXR650L
Love your vids. Merry Christmas.
haha heck yeah!! man ive been rooting for this project hard core. close to my heart, man. keep up the good work and BRAAP on!
I love your vids great to see the bike fixed and you happy
This quickly becoming one of my favorite channels.
Duuuude, U had me laughing just as hard as you were upon the completion at the end as if I had actually completed the task!!🤣😂🤣....
Hey man I just want to say I have enjoyed all or most of the videos you posted. Happy New year and keep the videos coming thanks
@jenniesgarage
6 жыл бұрын
Thank you, happy new year to you too.
That fix was super exciting! Can't wait to see the new project!
I knew you had this, good job for not giving up and good job all round :)
I am your number one fan here in the Philippines🙌🙌🙌🙌 i love your videos sir, very informative, and at the same time entertaining, more power
Nice job! Merry Christmas to you and the camera lady.
It’s ok I still smoke a little bit too.
Haha, victory!!! I love your excitement! Great video!
Don't you love just having to rip everything apart. Gotta love working on your own shit! Love the vids!!
This guys really good mechanic and interesting to watch. I started watching his video and I enjoy it I hope this guy get famous. He has a positive vibes videos.
Love your vids, smoke issue is probably that there is hella oil in the pipe built up, so take the pipe off and empty out the oil!
@Dronston
6 жыл бұрын
When I rode 2 stroke mopeds back in the day we would take the exhaust off, go to a sandpit or similar, poor gasoline in the exhaust and ignited it. It would usually burn the exhaust clean of oil residue. Another method was putting an old clutch cable in a drill and rotate that cable like a mad man inside the exhaust to get rid off some of the coal cake on the inside.
@MyNameIsEarl03
6 жыл бұрын
NL same and me and my dad use to use ammonia then spray the shit out of it with water... it worked though ;D
@pwn3dbyme
6 жыл бұрын
He addressed that issue
@Meekerextreme
6 жыл бұрын
You can use a MAP torch and hook up a heat gun and heat the pipe to ignite the the buildup and watch it roar, I got a video of doing it. Makes for great video.
@MyNameIsEarl03
6 жыл бұрын
Meeker Extreme I couldn’t find the video on your channel
It’s been a while, love the excitement!
Love it! And love you guys! Keep um coming!
YEAH !!!!!!!! You and Camera Lady make a great team, congrats on the fix, and for having a super supportive wife..
I REALLY LOVE WATCHING, THANKS!
Love the vids and commentator (camera girl) keep the vids and info coming. Thanks you
I live your videos I was as excited as you when it fired up and ran good!
Hell yea! I knew you'd figure it out. Nice pose at the end haha
Have a wonderful Christmas mate :) and family specially the boss lady lol
Awesome. Love that feeling when things finally work
FYI Great videos hope the best to you. Also have happy merry Christmas and happy New Year's.
Can't wait for tomorrow when you release 10hourd worth of shasta videos as a christmas present to us :D
I really like your videos, thank you.
Good work. Perseverance pays off
YES!!! awesome, good job......i want to see the new bike now!!
looks like a very good ray of hope glad you didn't split that case I cant wait until the next vid
Jake, thank you for doing another sweet dirt bike. I ask you to make this one really nice, like you did the Husqvarna. I love your channel.
Hooray! I'm always awaiting the next installment in this chronicle. Also the new bike... I wonnnnnnder what it is? :D
this is seriously entertaining , i love it!
been waiting on this vid! awesome.
You guys are so happy 🤙🏻 Nice 2 see
Blessings JG Family..Merry Christmas to you and your family..GOD bless..🍸🍷cheers.
Merry Christmas. Ending is priceless
That ending shot, was like a jumping high five still at the ending of an 80's movie, just perfect.
The BEST channel
These videos just get better and better....
Wow, that does sound a lot better. Nice work.
The KDX has checked in! Niiiiiice!
What a nightmare bike, but it appears that you have slayed another dragon. congrats!
Congrats on getting it working
Pretty amazing...those little two strokes can be a brain tease.
You are a lucky guy! My girl would never reply with an honest 'Yes, I would love too' when I ask her to go carberateur shopping~!
Nice, sounds a lot happier than before.
You got me hooked on watching Jennies Garage...how do you do that!! LOL
Cant wait for the 98 kx250 vids
Congratulations! Proper job! :)
I've never heard of a carb wearing out aside from scoring from dirt and things like that, but I guess with enough hours anything is possible. I bet new jets, float needle, and maybe float (if you think it's bad) would freshen it up though. And with how little that main seal was leaking, once everything is up to temp and expanded/softened it probably seals just fine. Been loving this series!
I am standing and clapping for your success! and i thought it was the tire pressure, oh silly me.
There has got to be some seals you are not seeing on the old carb you have not replaced, around the linkage for the throttle could be shaft play. Or some oring wherever the fuel is flowing. Love the vids keep it up, Also you should do some patreon on stuff so we can give you money to show us how to fix things :).
Wow totally different bike! Merry Christmas guys.
Seeing a new Jennie's Garage video is like Christmas in my heart.