"CULLEN what are YOU doing" made me laugh. We are so blessed to be able to see and work with our sons on a daily basis. Thanks Harvey and Cullen

Cullen is in the House 🏡 Today. Great seeing you Cullen. Time to Rebuild the Nice 372’s. 👍

@cullenjdrake

3 жыл бұрын

Hey brother!

Cant wait to follow these builds, another super well explained video that us novices can understand and put into practise. Cheers from NZ

Spit Polished!!! Organized shop is a happy Shop. And we can see the happy!!!

Hi Cullen great to see you in the shop with pa. The shop looks great guys 👍. Mr Harvey you sure make saw building look like a cake walk. Keep up the cool videos, hope you guys have a wonderful labor day weekend.👍👍🇺🇸😁

I see ol Dave behind u harv hope you an Cullen are having a good weekend stay safe out there.

Saturday Sunday!! Hi Cullen 👊. Doesn't matter what day. I'll watch every one. Hope everyone is well here.

Good video , learn something every time . 👍🇬🇧

Love it Ironhorse. Those are some great saws buddy. Thank you Ironhorse for your time. I love ya man. 🌲❤🌲✊

I work at a scrap yard and alot of saws come in. Yesterday a 372xp came in. I added to my collection. I love fixing up saws that people gave up on. This 372 will get the iron horse treatment. I'm warming over a real clean McCullouch 610 right now. I heat with wood and I love cutting and hand splitting firewood. Best workout there is.

Hey Harv nice to see ya Collin nice clean job right on..❤️🙏👍☮️💪

That 372 looks almost new! At least on the outside 😄

Harbor fright has those metal magnetic bowls in couple different sizes for couple bucks they work great for tossing bolts and parts into and if ever gets knocked over or off bench they don’t go everywhere! Cheers

Harvey your a busy man on a Sunday!!!!!👍

Hate to hear you not buildn any more saws I always wanted u to do my 066 mag I haven't been able to get anything to replace it as my every day bread and butter I'm working on a 461 to possibly replace it so that I can get the 66 some much needed tlc an some Port work but still don't have the 461 not ready yet hopefully not much longer though. Thanks for showing ol Dave it was me that asked about ol Dave in ur last video thank u sir I appreciate it.

Nice seeing the two of you work together.

Hey there Uncle Harvey… I’m just getting around to finishing up my first version of the Xtorq I’ve got four good oem cylinder’s and it’s just outside my wheelhouse to trash anything that I’ve never tried to get going better so I cut my pocket to blend my fuel and air charge in the front of the intake on the outside of the cylinder so there’s more fuel mixture going through it and I ground down the risers in the transfer area to increase the charge even more… gonna through the fuel at it and see what it does! I’m just too curious to not try a couple different ideas and see if anything sticks??? LMFFAO! I was also doing a little measuring and marking and the bottom of the big pistons can be raised a bit but that’s actually compounding that top heavy piston even more… not going to last time but maybe get some work out of it???? Gonna try to make it hit better… not much volocity in those saw’s…

Ever seen the mess a horse can make in a stall? Imagine the mess an Ironhorse can make. Lol

@chuck805

3 жыл бұрын

Or his son. LOL

West coast folks prefer those battery powered saws, anything more powerful tends to overwhelm them.

Dooly one ton r ft. u joint r & r. And an 03 impala dr,s wheel baring r & r from the knees Good gosh o molly. I love the sound of a 180 out timing boom at 2 am. with the 77 Monty Enduro.

Keep up the good work can't wait for more tips and tricks

Love the info great video keep up the good work

Looove my uncle harvey time, looking forward to some secret sauce ! Looks good buddy good job Cullen. And thanks for everything mr ironhorse, uncle harve, brother!

Thanks for the video harvy and cullen

Life's gotta be balanced for a man to be happy all work and no play not going to work ,im the same with old skool cars , can't stand see them not going, I fix them to breath new life into them and to make the owner happier , like the magnetic tool holder ideal for your bench.

I'm really bummed that you aren't taking anymore saws in but I completely understand as well. Shop looks great! Good job Mr. Cullen. Very interesting on that husky intake... I wonder if it's possible to swap the piston, plug that upper port or just open her all the way ? I'm learning everything as you post it so I really dont know if that's possible. Anyways, great video. Best part was : "Cullen, what are you doin?! ". God bless Mr.Harvey and Mr. Cullen. Have a safe and happy Labor Day.

thanks 4 video. be kind...

Cant wait for that wright saw 👍🏻

I've been watching you since early last winter

Harvey I just bought two saws from eBay and they were the same way that that saw your working on Chinese top ends

Hey ironhorse love all ur videos I have a husky 51 I know its tiny but I would love to send it to you for one of your 50 cc builds

I just ordered a g372xp I would love to have one and aftermarket exhaust systems Roy's talkin about just see how it would perform my first big saw I ever had where can I purchase one of them at? And PS keep up the good videos we enjoy watching them

Why is an an xtorq so bad?? Im just wondering

Harvey sometimes you just have to smack them cats when they get on the bench .👍👍😊😊💝💝 lol

Hay Harvey People knocking you over on you junk yard dawg so these people are not familiar with rat rods ? And the same thing is done with mother bikes . It’s your Chanel if you want to build a hodgepodge saw do it the only thing count it works if they don’t like it then they should watch some one else KZread Chanel or make there Owen saws 👍👍👍👍👍🍺🍺🍺🍺🧐 just keep doing what you do

Hey buddy like your channel, been subbed since you started. I see you seem fed up with saw work it seems on your videos. I remember the 10 red, white, and blue saws you were gonna build. You were excited,and us viewers ,too. But I guess things change. Take it one video at a time ,i like your channel anyways nice Maico ,and CR 500s

Have you ever used heli coils to fix stripped threads?

A have a 266 se with heated Handel's. Eny ways what is the difference from 266xp to 266se... And harv what happend to the cr 500 did it get a new cylinder stay safe.

looking forward to a re-assembly & how to center crank explanation. also why are some crank bearings sealed & others are not ?

@jimball816

3 жыл бұрын

i am not fimiliar with chainsaw SIGHTS as aids to direct tree fall direction. could you show what is placed on saw & how to use. thanks

Do you sell ported cylinders and piston sets for the 372xp husqvarna?

Alot going off 200 and 210 key file and muffler mod. Which give them a little more power. So guess figure do it too the bigger ones you'll get the same.

I'm not trying to be negative I'm just wondering about an x torque. I've built a p52 41 and a farmsaw 2 but I'm learning. I paid 500 for a x torque 372. It is like new with a hiway popup in a mahle cylinder

@jamiedalluge9472

3 жыл бұрын

Xtorq cut tons of wood but by what I understand their a immission version of the o.e saws. Alot depends on how much your actually cutting

Where can a guy find an old 372? They seem to be popular on here.

Need a Poulan 4000 piston and cylinder if any one has one?? Thanks iron horse

Hey Cullen how are ya bud

@cullenjdrake

3 жыл бұрын

Living the dream brother!

hey men

Holy 372s most nice ones I've seen in one spot together. There all dead around here. I'm probably guilty of killing a dozen or so.I wish we could still get them. New ones are ugly colors. Lol.

Saw hasn't been logged with?? Hell that thing hasn't been run

Hey Mr Harv and Cullen don’t focus on the negative people world is full of shit heads turn on the tv. Far more positive on here keep on keeping on. Have you been watching tinmans saws he’s been doing some good stuff

One Moore thing rat rods go for big money and they don’t look pretty

Hj fellers. Did you get the whats app i sent with the homelite i wanna give you?

@jeffreyrubish347

3 жыл бұрын

If Harvey doesn't want it I guarantee Tinman does!

Harvy I've been trying to email you a but cant seem to be able to get it wright. Could we somehow figure out a way for me to get a phone number to talk to you or a way to get my number to you with out email I just cant get it wright thankyou

Harvey. Instead of always bad mouthing those 372 x-torgs that how horrible they are. Try to modify one.

@oldmanfred8676

3 жыл бұрын

If you do this professionally you should put your contact info here so people can contact you to upgrade their equipment!