this is inspiring to mazda 3 owners across the globe

@bobsoft

2 жыл бұрын

kzread.info/dash/bejne/oHl614-ipLm7adY.html

@zacharymurdock6721

2 жыл бұрын

And Ford Duratec owners lol

@GT-Tezzy

2 жыл бұрын

@@zacharymurdock6721 Mazda and ford separate engines

@carterpeel625

Жыл бұрын

@@GT-Tezzy nope

@GT-Tezzy

Жыл бұрын

@@carterpeel625 Mazda is owned by the Mazda Motor Corporation, based near Hiroshima, Japan. The Ford Motor Company bought stakes in the company in 1979, and owned over 33 percent of the company by 1995. However, Ford sold all its Mazda shares in 2015.

Big misconception, Mazda designed and manufactured the engine. Ford bought licensing to also manufacture these engines as well. This is a Mazda engine not a Ford.

@hankhilll4651

2 жыл бұрын

I never knew that. Thank you Drip Goku

@dripgoku2477

2 жыл бұрын

@@hankhilll4651 you’re welcome Hank Hill from the show King Of The Hill.

@ZenoCL9

2 жыл бұрын

It’s also the exact same 2.5l engine that’s in the 2nd gen Mazda 6 gh

@stephenbowden1142

2 жыл бұрын

Doesn't ford own Mazda? Nevermind Ford sold all its shares in Mazda in 2015. They had owned 30 to 60percent of Mazda since 1976

@Sk0die

2 жыл бұрын

Yes and I believe that Ford supplied Mazda with a huge amount of basic parts for their Mazda's such as alternators, contol moduels ect.

I dig the trunk battery setup. Honestly most cars should come that way.

bought my 2.5L for 700 at 93K in feb 2021. Its a fun little motor. no wonder the nc guys swap them. one of the easiest swaps you could probably do

Thank you so much!! I needed this info for my car. Already 2.5 swapped 🤙

Loved the video, i smiled like i was in the car for the pulls, also inspired me, i have a 2.5 but still have the 5 speeds, gonna swap everything eventually and big boost like this

Met a guy at autocross last week who had a 2.5 turbo NC miata, it was stupid fast!

I’m building a 2.5 manual escape with a turbo it’s going to be awesome!

By the way, the Mazda 3 was a rebranded ford focus. The Mazda 6 is a rebranded Ford fusion. I myself have the 2011 ford fusion 2.5l manual transmission. The reason I bought the Fusion is because I love the Speed6 however I wanted the 2.5l and like the looks of the fusion better. My fusion is kind of rare being a manual. Fun fact, the transmission in the fusion is actually the same transmission used in the non turbo Mazda 6 manual. I actually plan on putting a turbo on 2.5l, swapping in the Speed6 transmission with the AWD rear end. Since it is a ford fusion, the Mazda speed awd system wil bolt onto my Fusion.

@alexbakaloff

2 жыл бұрын

that would be so sick, awd turbo fusion? as sleeper as it can get

@cesarpalmos8235

2 жыл бұрын

@@alexbakaloff Absolutely, looks like a grandma car but goes like hell, when ever get the time, I will start posting videos of the build.

@Sk0die

2 жыл бұрын

Have you made any progress? Sounds like a dope idea

@cesarpalmos8235

2 жыл бұрын

Yes, right now Ive installed some MS6 suspension parts, brakes, engine mounts, and some small detail stuff. Right now im working on replacing worn parts (it is a 12 year old car after all) before making power.

@cesarpalmos8235

2 жыл бұрын

Right now I'm working on installing a MS6 short throw shifter

Fortune autos on my miata..tell your boy he's going to love them! Huge difference in handling.

The motor completely stock would have made about 150 hp, its currently not put together but I’m hoping to double it, haven’t finished the build as it’s my daily

I would absolutely love to put this engine into a 2008 Mazda 5 GT

Im in the process of building a boosted mazda 6 i 06. Got t04e with custom downpipe, fmic custom pipes, 38mm tial mvs wastegate, 550cc injectors. Just needs tune. ( specifically mazdaedit on stock ecu)

2.5s are legit. Been boosted for 3 years already.

@mr.everythingrandom9470

Жыл бұрын

How much power? And stock rods?

@project2ndgenspeed672

Жыл бұрын

@@mr.everythingrandom9470 around 300. Engine is untouched other than a BSD.

@mr.everythingrandom9470

Жыл бұрын

@@project2ndgenspeed672 balance shaft delete?

@project2ndgenspeed672

Жыл бұрын

@@mr.everythingrandom9470 yup, that's it.

@mr.everythingrandom9470

Жыл бұрын

@@project2ndgenspeed672 good to know, working on boosting a gen 2, 3 sport, and aiming for 450 whp, which I will get rods for. But some people have had 500 whp on stock internals

can you please do a product list so I can buy these parts

Tengo un mazda 3 sport grand touring del 2011, es 2.5L Manual de 6 velocidades + R Tiene buena potencia pero me gustaría aumentarla, sabes cuantos psi soporta sin forjar nada?

I REALLY want to do this to my 2010 Mazda 5. I would greatly appreciate any advice/insight/part lists to build it!!

I have a 2013 Ford Fusion with the 2.5l duratec engine and would love to turbo it so would this 2.5l be the same as the one that’s in my car cause there are different orientations of the 2.5l

@alexanderdanielsson6049

Жыл бұрын

it is the same

@eventhorizonperformance

10 ай бұрын

Congrats, you have the most reliable, but slowest Fusion model. As stated, the 2.5 is exactly the same and in the same orientation as swapped into the Mazda. You can turbo a Ford Fusion no problem, but you will probably have to fabricate your piping and manifolds as there isn't much of anything aftermarket to choose from off the shelf. The 2.5 is a slug in Fusion due to it's weight. In a Mazda 3 it's decently quick.

1:41 this is true happiness

Doing this with my 6 here soon!

did you have to upgrade you intank fuel pump? or a surge tank good enough?

In the process of building my focus ST with fueltech, old style cylinder head, sidewinder manifold, ID 1300cc injectors and surge tank. Built motor is next…shooting for 700😈🫡

How do you get a car like this to pass emissions is my only worry. Thinking of swapping a 2.5 into my 81’ foxbody (has a ford straight 6 with only like 100hp)

@gonzogriff

Жыл бұрын

is it the ford 300? that thing is a beast if you rebuild it/upgrade it.

@vlostweaks1474

Жыл бұрын

come live in tx 😂

What year is the 2.5? Or does it even matter?

What a beast

LOVE this!

Locally there’s a 2006 Mazda 3 with a blown engine. Is there a year of 2.5 that will bolt in and fire without any other modifications?

@bobsoft

8 ай бұрын

You use the 2.5L block and swap over the 2.3L top end. 2011 Fusion 2.5L

Who do y’all recommend to get me a 2.5 built block so I can push more power already probably making 340whp

@carlossantamaria7967

2 жыл бұрын

HMU bro 🤙🏼

@Hudson-qs1ye

Ай бұрын

Can I message you on your build? If so how?

did this have stock internals?

So what was done to the 2.5?

@i.t.s.t.h.e.c.a.l.z.o.n.e

2 жыл бұрын

Im curious too. I wanna know if he has stock conmecting rods and how much boost

@eventhorizonperformance

10 ай бұрын

@@i.t.s.t.h.e.c.a.l.z.o.n.e These motors can reliably hold 350-400hp /w associated torque if you have a good tune dialed in. They are built very tight from the factory, so beyond that the ring gaps can cause issues, which is why many 2.5 owners looking to make big power regap the rings.

How much boost was it running and does it have up-rated connecting rods

didnt know 2.5s could take boost bouta turbo my base model ass fusion when i get the money 😭

Where did you buy that roll cage? Is that custom made or do they sale in online somewhere.

Any tips on where to find one of these? And at a good price?

@adrianballestero2030

6 ай бұрын

Where you able to find one by any chance?

can u make a video on the fuel return set up?

Nice build.

I need help my brother in law has the same make and model and he is upgrading his to a 2.5 turbo from a 2.3 turbo and he wants to run it only at 300hp even though it can go to 400 originally from the 2.3. But he just wants to know with the 2.5 turbo how many pounds of pressure torque does he need to apply on 3-11 Newton miller meter ? I need help big time I’m going nuts searched the entire internet and nada!! Please help!!

@monicanazario6832

8 ай бұрын

He is doing the header swap from 2.3 to a 2.5 just the header and a bigger turbo. Everything else is original 2.3 parts! I need help!!❤

I've been considering this swap for my 2015 fusion titanium. Anyone out there try that yet?

Really Nice!!!!

I have a 09 Mazda 3 what other engines could I possibly swap out with it rn I have the 2.0 rn but wanna get a 2.3 since that’s all Ik what I can do lol (idk much about cars)

@migopurp9892

4 ай бұрын

I hear that people are swapping the bigger 2.5 engine in it. It’s supposed to attach right to everything.

motor alüminyum döküm değil nasıl duruyor

What’s the actual combo, is it a 2.5 bottom with 2.0 head or is it a 2.3l head?

@Ascends

2 жыл бұрын

2.3 head

@LifeOfTuners

Жыл бұрын

Probably 2.5 head as well

@resignator

Жыл бұрын

@@LifeOfTuners 2.3 head bolts right on. Everything bolts right on...alt, water pump, sensors, etc. Same exact engine only one has been bored out.

@eventhorizonperformance

10 ай бұрын

Everything from the 2.5 is used from head to bottom end for the swap. You have to install a 2.3 timing cover, crank pulley, use your Mazda harness and a few other odds and ends. 2.5 head flows more than a 2.3, no idea why you would get just the block, unless you are changing out the bottom end on a MS3. If you are doing the swap, no reason to take apart the engine. You can get the entire longblock for a few hundred dollars and just drop it in after prep.

I have a 2011 mazda 3 sport grand touring, it is 2.5L 6 speed manual + R It has good power but I would like to increase it, do you know how many psi it supports without forging anything?

@colin1567

5 ай бұрын

I’ve heard 300-350 but the engines are so cheap I wouldn’t worry about it

@rileymacdonald5036

Ай бұрын

The rods are already forged so you will be fine

@jordanprice9285

25 күн бұрын

​@@rileymacdonald5036How much can these make on stock block and head together? I'm assuming about 400hp but not sure.

stock internals?

Have an 07 2.0l mazda 3 running the streets for years. Has 246k miles rn just started making timing chain noises 😳

@joogullae3456

Жыл бұрын

The timing chain stretched, I believe thats a very common problem that you should quickly get fixed.

IT CHIRPS GOING INTO 4TH, YA’LL

Does the 2.5 match up with 2.0 manual transmission? ???

@purestone10

Жыл бұрын

Don’t think so. Has to be 2.3 head from what I’ve read

@eventhorizonperformance

10 ай бұрын

2.0 and the 2.3 transmissions are exactly the same. You can even use your stock 2.0 flywheel and clutch.

zack smoked a fat bowl before doing this video

how many max rpm does it lift

@eventhorizonperformance

10 ай бұрын

Stock redline on a 2.5 is ~6500, but you can rev them to about 7000 on the stock valvetrain. I would not go higher than that on a stock head. Most people just leave the stock rpm limit that was on their 2.0/2.3. These are pretty torquey engines with a lot of power under the curve, so you don't really need to rev them out like a smaller displacement motor, at least on stock cams.

Oi aren’t you in Michigan?

The 2.3 is built by Mazda not a Duratec.

@eventhorizonperformance

10 ай бұрын

All Duratec motors were "designed" by Mazda. Ford acquired the rights to manufacture the engine for the Ford lineup, but it's the same engine that went in the Mazdas as well.

The need for speed

lost me at ford

@sarahburnside4606

11 ай бұрын

It’s a Mazda designed and manufactured motor that ford slapped in everything, not the other way around

@eventhorizonperformance

10 ай бұрын

All Duratec engines are Mazda designed. Ford bought the rights to manufacture the engine for the Ford Duratec lineup. The longblock for these engines are exactly the same between Mazda and Ford. You can swap one into another and drops right in with no modifications. You just have to dress the longblock with either for Ford or Mazda harness, depending on what car you have.

Can you mute that into an.nc Miata?