Jay, congrats on the gold! And THANK YOU for doing everything the right way. You dig it all, you fill in the holes, you throw away the garbage, and you have fun through all of it! Have a Merry Christmas, and a very Happy New Year!

Congrats on two rings Jay , goodluck on the next hunt thankyou for the video

Great finds Jay 👍 and great videos. Keep those gold vids coing 👍😎

Should put a magnet at the bottom of the scoop for iron objects or wire,paper clips.

Congrats on your first gold for the Xterra...

Great finds!

Great hunt Jay. Nice find on the ring as well.

Congratulations on the video, hugs from Brazil.

Awesome finds

Need a long handle scoop.saves on your back.makes detecting a lot more enjoyable

Awesome finds! Hoping to get out tomorrow if it's not raining too hard! Yea, the pin pointer seems to be catching the halo on the big stuff.

Dude! What do you mean? I did not see it but when I do tell you you don't listen it does not matter how loud I say it😂. Bouncie or jumpy targets tend to be bottle caps especially as you pull back off them while swinging they will jump to an iron number, check it out also they will do this when you bounce the over a target most of the time as well, a coin not so much. Keep on swinging and remember to make it fun and Happy Hunting 🙂👍

The 3rd key reminded me of a spam can opener, lol. When I detect the water, I turn sensitivity down to where it just cuts the chatter or where I can manage it without going crazy. Most of my targets last week were deep also, and mostly in the dry. I love my minelab detectors, but I think my vanquish pinpointed left of center. Maybe yours is similar. I mainly use the equinox now. Congratulations on your finds. The gold ring is very nice. Hope there are more coming your way😊. Take care

Dobrá práce 👍👍👍

Howdy again and Merry Christmas ❣️

@Gaptains_vloG

6 ай бұрын

Howdy, Leann! ☺️ Merry Christmas!

GREAT hunt! Congrats! Your pin pointer does seem a little "crooked", though! 😂

Unreal what pops up.

I just bought one. I'm still learning some stuff, but so far it's brilliant. I have a Garrett at pro, and I think the terra pro is better.

Hell yeah👍👍

A great hunt but a little concerning the detector did not pick up the pocket knife until you selected pinpoint. A knife that size should have read.

@carolrice2063

6 ай бұрын

I think that he hasn't increased the X-Terra Pro iron volume and it's a hidden features that nobody has ever seen it Or read the instructions and I have watched so many videos of people that don't even change the Tone's Break and the minus-16 is on the Screen and they keep going By it and it will change back every time you turn on the X-Terra Pro..... and keep a lower sensitivity and the X-Terra Pro can get the targets and I started with 12 Sensitivity on the very first time I was using it and I switch between 12- 18 Sensitivity and nothing higher than 20 without any kind of ground Feedback and that's why the Jumpy VDI is Happening with the X-Terra Pro and the junk Targets and it's a Very Powerful Detector and the Budget Price Range....❤....

Amazing the coil didn’t produce a sound with out pinpoint on that knife. Always crazy how angle and position play a role in finding stuff. I have the equinox 600 and I leave my threshold just a little audible to hear the change in pitch in an attempt to not miss stuff. Great hit on that ring! Congrats

@Gaptains_vloG

6 ай бұрын

Thanks. I’ve watched videos where detectorists can differentiate targets by the sound it makes. I’ll have to remember this wobble sound. This is one thing I don’t like. No iron sound unless pin pointing or you use threshold audio. I got lucky swinging over the knife.

@carolrice2063

6 ай бұрын

​​​​@@Gaptains_vloGHave you turned it up yet the Iron Volume in the Hidden Settings ????? 🤔🤔 And I will try to tell you how to get there, Push the Settings Button and go over to the volume and then hold the Settings Button down and Up comes e1 and that's the Iron volume and just push the Plus button and it will go up and then after that just hold the Settings button again and it will get you back out and then you can change the Tone's Settings when you go to the -16 and then hold the Settings Button again and it will change and e1 will show up again and that's the tone break if I have read it right and possibly the accept/reject tone function which is hidden and about every video that I have seen of the X-Terra Pro everyone hasn't changed the -16 and just scroll through again and again and I hope that helps you with the X-Terra Pro... and the iron volume and the tone break....Edit And Lower the Sensitivity down below 20 Sensitivity (15)and the X-Terra Pro will really sound off on the good Targets and then when you get to Another Park the Same Settings that would work at one place May not work at another it's really Site Dependent on the X-Terra Pro Setup.... edit again and the Settings that you have done will have to be done again each time you turn on the X-Terra Pro At least on the tone break always goes back to -16 every time and if you use 5 Tone it will only go up some but when you are using the All Tone's it will go All the way to the top of the scale and I haven't tried it on the Depth Tone And see how it goes ?? YET.... And Good Luck 🤞....

must be nice diggin in that sand as apposed to this crap in chicago

Would the six inch coil also work well there but not be as cumbersome?

Nice find! What's the hottest sensitivity you've setup the XTerra pro?

Bende xterra pro kullaniyorum su alti ve beachda çok memnunum

I haven't noticed the pin point being off on our Xterra Pro. Maybe it's operator error?

Grajy