1999 2000 2001 2002 2003 2004 WJ Jeep Grand Cherokee Dash Removal and Heater Core Replacement
Автокөліктер мен көлік құралдары
#jeep #grandcherokee #dashboard #removal
1999
2000
2001
2002
2003
2004
Jeep grand cherokee WJ
Removing the Dashboard in this multi part series!
Anything you need to know about the Dash in a Jeep WJ, you can find it on my Page!
#wj
#jeepwj
#jeepgrandcherokee
#diy
#autorepair
#suv
#easy
#project
Пікірлер: 78
I will also be doing this soon. Need to fix check engine light, replace the radio unit, repair the hvac unit & blend door actuators, probably get a new sub assembly. I love this video, thank you so much!!
@Motorcycle_Man
2 ай бұрын
Awesome brother I'm glad to hear it! I'm also really glad this helps you. I did an entire series on everything a/c Related, here's the playlist link in case you want to check it out Jeep Dash and Heater Box Series: kzread.info/head/PLmvQTAueEG62PQ-FvG2-oE48CjEUnsgB_
I’m actually doing this process myself! Your video is helping out a lot!
@Motorcycle_Man
3 ай бұрын
Thats what i like to hear! Good Luck! If you need more videos i have a whole playlist on my channel that's all related to removing and rebuilding the dash
@andrewg.8876
3 ай бұрын
@@Motorcycle_ManI had a hell of a time trying to get that cable out that goes under the steering column until I turned the key on the ignition and it came out like butter.
@Motorcycle_Man
3 ай бұрын
@andrewg.8876 yeah i cant remember if i mentioned in the video that the key needs to be turned Glad you got it figured out, when its all fixed and done you'll appreciate the jeep that much more 👍👍
@johnpope8949
2 ай бұрын
@@andrewg.8876 exact same thing happened for me. I’m in the middle of this project and I was FIGHTING that dang cable until something told me to try the ignition.
Great video I used this to remove everything and replace all the guts of my hvac system
@Motorcycle_Man
Ай бұрын
Awesome! Im glad my video is serving its intended use!
@shanewiliamjohnson
Ай бұрын
@@Motorcycle_Man after i finish putting the dash back on, should I go to a shop to have the lines vac tested and refilled? Or try at home?
@Motorcycle_Man
Ай бұрын
@shanewiliamjohnson I would definitely take it to a shop. There they will have all the proper machinery to do all the correct tests and refill procedures. It may cost a little more, but it's better to go ahead and do it the right way.
Thanks for your efforts. Good video
@Motorcycle_Man
2 ай бұрын
Happy to help!
@walterbrennan7887
2 ай бұрын
@@Motorcycle_Man mine there was problems getting the dash to unlatch on the passenger side
@Motorcycle_Man
2 ай бұрын
@walterbrennan7887 yeah it can be tricky to get that part, Good Luck !!
You act like you've done this before :-) Great video, very concise and well presented. Almost makes me look forward to doing this job... but not quite lol. Thanks man, super helpful 👍
@Motorcycle_Man
8 ай бұрын
Extremely glad to hear this, it's all about helping others 😄 you could definitely say I've done this a few times before lol
@Motorcycle_Man
8 ай бұрын
If you have any questions along the way feel free to ask me in the comments, I check and respond to all of them
Great video, very helpful
@Motorcycle_Man
10 ай бұрын
Glad I can Help, Thanks for Watching
I’m doing this right now. Wish me luck
@Motorcycle_Man
2 ай бұрын
Good Luck!!🤣🤣 Its not bad, i just recommend getting an extra hand when its time to lift out the dash.
@Motorcycle_Man
2 ай бұрын
kzread.info/head/PLmvQTAueEG62PQ-FvG2-oE48CjEUnsgB_&si=uH1AxvyBoHxUZLuj Also here's a playlist I made that's everything jeep wj dashboard and ac/heating system related
@johnpope8949
2 ай бұрын
So far your instructions have made it very easy. That dang cable under the steering wheel at 9:35 which seems to have disconnected easily for you is giving me a really hard fight! **the key has to be in the ignition to pull this cable out I just figured it out**
Nice detailed vid! I feel for you, lol! I’m trying to figure out what is directly behind the ashtray hole, a harness or duct work? I’m in need of placing (2)3/8” long screws through mine(just a cubby/no ashtray as mine isn’t the V8 model) to mount a bracket to hold my communications radio face plate. The screws will be low in the cubby maybe 1/2” up from the bottom of the cubby. I don’t need to be putting any screws through a harness!
@Motorcycle_Man
Жыл бұрын
Thanks for watching ! Let me check on my lunch break and I'll get back to you!
@desertd2609
Жыл бұрын
@@Motorcycle_Man thanks but I did get it figured out last night! I keep forgetting how poorly our vehicles are built these days and seen another video where that lower dash piece just pulls out/off! There is a harness back there but short screws don’t interfere.
@Motorcycle_Man
Жыл бұрын
@@desertd2609 hell yeah I'm glad you got it figured out. I was gonna say I think its all wiring harness down that low. After doing the dash 3 times I should of remembered lol
@desertd2609
Жыл бұрын
@@Motorcycle_Man man I feel for you!!! I’m pretty mechanically inclined but I wouldn’t do that job 3 times, it would be gone and move onto something else!
@Motorcycle_Man
Жыл бұрын
@@desertd2609 trust me, I was at my breaking point. 2 DEFECTIVE HEATER CORES! How is that possible... I finally bought the mopar one and was solid
I'm putting the dash back together and I found a 3 prong connector plug right next to the gage cluster just underneath it. I cant for the life of me find where it plugs back into. Any ideas?
@Motorcycle_Man
Ай бұрын
Do you have social media? I have facebook and instagram Do you wanna send me a picture?
Well done! That will be my wife’s reaction when she sees me rip the Jeep apart
Hey Nick, great videos. I'm 68(to old to do this job) but I need help with my '01 4.0 Grand w/ a bad heater core/hvac. I'm interested in speaking to you about doing this monumental job for me. My name is Gary located in northern Delaware.
@Motorcycle_Man
12 күн бұрын
Hey Gary, Thanks for reaching out. I'd be happy to help in anyway possible, although I live pretty far from you all the way up in Maine
How long does this take like a couple hours?
@Motorcycle_Man
4 ай бұрын
For me, if I work non stop and I've done it multiple times and know all the tricks I could do it in less than 2 hours, maybe closer to 1.5
I recently replaced my blend door actuator and I still hear that noise when my Jeep is off. Almost sounds like it’s coming from the blower motor area. Any thoughts?
@Motorcycle_Man
4 ай бұрын
The clicking sound you mean?
@S_Anaya
4 ай бұрын
@@Motorcycle_Man Yes.
@Motorcycle_Man
4 ай бұрын
@@S_Anaya it could be the blend door is broken or the motor on the backside is broken like i showed in the back To fix it youd have to take apart the dash. I have a whole Playlist on how to remove and do everything if you need it
@S_Anaya
4 ай бұрын
@@Motorcycle_Man Yes, I watched the whole series. Excellent how to! Definitely saved for future reference. Thanks for your replies.
@Motorcycle_Man
4 ай бұрын
@@S_Anaya very happy to help! Good Luck, and if you have any questions just comment and I'll reply!
Good thing you found that woman! I'm guessing labor for that job is atleast $500 or more. It's way more than I thought of work. Boys and girls is correct 😊
@Motorcycle_Man
11 ай бұрын
Haha Thanks for watching 😄 yes I've heard of labor being as high as $1100 depending on where you go
Any thoughts on how to fix a non working parking brake? Mine looks like yours, 2003 jeep.grand cherokee inline 6 4.0l limited with all the upgrades from factory. I've put around 5-6k into replacing what feels like everything at this point and I found out recently that it'd cost 1100 to replace the whole ac system; I've also got the drivers window and passenger windows to fix still aswell.
@Motorcycle_Man
11 ай бұрын
So about the parking brake, have you adjusted it at the back wheel or inspected the shoes? I would start there, only other thing it could be is the cables..
@Motorcycle_Man
11 ай бұрын
The ac system is a pain in the butt to replace, but definitely worth it. Also I'm getting ready to post a video on the window Regulators if you need it, they are pretty easy to do
@Motorcycle_Man
11 ай бұрын
Whats included in the ac system replacement that you mentioned?
@rohncarver3585
11 ай бұрын
@Motorcycle_Man I don't know the name of most of the parts I've replaced off hand I just know where they are. The mini radiator had a hole in the side, the compressor pump in the middle back straight left is cracked on the bottom and then the hose is leaking at the metal.connection point where I had electricians tape wrapped around a cover sheath since I went and replaced all the wire protectors I could reach in the engine bay because they disintegrated
@Motorcycle_Man
11 ай бұрын
@@rohncarver3585 oh yeah I just did all of those repairs recently on mine, sounds like you need a condenser, a/c compressor and new a/c hoses. Let Me tell you now bro. That's alot of work! But in the end it will feel so nice sitting in the A/C