1998 to 2001 Subaru Impreza power window motor procedure. Same for Foresters Legacy and Gc8 Rsti

Автокөліктер мен көлік құралдары

In this video I replace the right front power window motor. It's the exact same procedure for the left front, rear is also the same minus 2 less bolts and screws. I also show tip of how to replace the screw with m8 screws with m8 bolts for future ease removal/replacement.
older 93-97 Subaru impreza is the same procedure just the door panel removal is what changes.
Tool list you will need:
Standard #2 screw driver
amzn.to/2umjdVy
10mm deep socket with 1-3 inch extension with 3/8 ratchet
amzn.to/2s2kMas
#2 bit 3/8 drive impact socket
amzn.to/2uh9X4U
or an impact driver to remove the stuck on screws from the motor to the regulator dosent have to be electric
amzn.to/39KMpWj
Here is the exact motor i used for this
amzn.to/35pAOsr
As always thanks guys for the support and if you can hit that subscribe button so i can make more install vids for you guys.

Пікірлер: 10

  • @TomIsTerrible
    @TomIsTerrible4 жыл бұрын

    I started taking mine apart before watching your video and almost lost a finger to the spring. I laughed so hard when I opened this and saw you do the same thing. Super helpful video also! Thanks!

  • @masmotorsports

    @masmotorsports

    4 жыл бұрын

    Thanks so much next vid hopefully coming soon 👍

  • @stephenfresh1754
    @stephenfresh17542 жыл бұрын

    Oh okay so you replacing a bad window motor, and yet you're using the window motor to lift and lower the glass to put it in a more convenient position for yourself?

  • @Xshadowshadex
    @Xshadowshadex4 жыл бұрын

    About time someone makes a video about this

  • @masmotorsports

    @masmotorsports

    4 жыл бұрын

    Thanks so much! Going to try side skirt install next 👍

  • @Xshadowshadex

    @Xshadowshadex

    4 жыл бұрын

    @@masmotorsports what kind are you installing?

  • @masmotorsports

    @masmotorsports

    4 жыл бұрын

    @@Xshadowshadex 98-01 rs ones or jdm wrx/sti ones, should be easy peasy

  • @rustdawg7364
    @rustdawg7364 Жыл бұрын

    Doing mine in an 01 forester. Somehow the motor bolts were all off and split the wires out of the motor.I took the motor apart and trying to solder the pigtail back on .I cut the old wire clean .

  • @jro1560
    @jro1560Ай бұрын

    Will that motor part fit in a 2 door coupe?

  • @princelinus8320
    @princelinus83202 жыл бұрын

    Would te spring release if you took off the motor while the regulator is still intact?

Келесі