No video
1997 Honda XR250r Valve Adjustment Job
This is how to adjust your valves on a Honda XR250r. If your bike is not starting or running right then chances are it's your valves. After I did the valve adjustment on this bike the bike fired right up with one kick and no choke. Awesome.
Пікірлер: 17
Thanks man, this video was really helpful. I just got a 1985 CBX 250, which has the same engine. I've only ever worked on car engines before, so I would not have guessed that the timing mark was under that top cover!
Nice, Just picked up a 96 xr250l with some noisy valves. This made things a lot easier than digging through the clymer manual.
good tip on bending the feeler gauge / shim stock. thanks for uploading
This video is adequate for people with average mechanical abilities. 👍
Being a 4-stroke engine, it is not enough to align the TDC mark as shown, you have to make sure that all the valves are closed. You would know if it's the true TDC by slowly turning the crank back and forth with the T mark aligned. The valves should not move, if they do then turn the crank one full revolution.
@Al-df7np
10 жыл бұрын
I'm glad you added this comment. The piston has to be at the top of the compression stroke NOT the exhaust stroke or the valves will be under load and not loose.
@JarthenGreenmeadow
5 жыл бұрын
A+ comment
@ashlynnkoch9646
2 жыл бұрын
That's wht I was gonna say this guy is fucking alot of people
Great info
Thanks for the helful video!! I finished my valve adjustment with the help of your video and the bike's manual and now my bike's exhasut valves click when I turn it on. Like rapid clicking when it opens and closes. I did loosen the decompressor cable but I put it back on and followed the manual for free play in it. Would anybody have any ideas on why my exhaust valves still click?
Bad ass video you really know what the hell your talking about!!!
How long did it take for you to complete adjustment start to finish?
Did he just say a 15/16 SAE wrench... Oh good lord.. 😂😂
On my '97 xr I had oil pour out of the lower cover (where you turn the engine over). When I worked on my 1993 xr no oil came out of this cover. Which one should have had oil in it or is should the '97 have oil and not the '93?
@UlisesGlez26
5 жыл бұрын
My 2001 also had oil on the covers
@ashlynnkoch9646
2 жыл бұрын
Id say it was over filled
Josh why dose ur bike sound like a fart can