My neighbor across the street is exactly 90 years old and when I pulled the car (95 GT convertible) in the first day he came over and wanted to go for a ride. He’s cool as they come. He was just bummed he can’t drive a manual anymore.

I would say the most important mods for sn95 chassis are full length weld in subframe connectors and rear gears. The car becomes night and day different in handling with the subframe connectors. Gears speak for themselves.

@1ksquid07rr6

Жыл бұрын

Ab sa freaking lootley

@destruxandexploze2552

2 ай бұрын

Absolutely

SN95's the "Pocket Rockets" are the best-sized Mustangs, she's lookin' and sounding great, just subbed, keep the vlogs coming.....

@lollis_garage3683

4 жыл бұрын

mike stang I appreciate it sir!!👍🏼 I love the sn95s for sure! Thanks for the comment and the support!

@Theydotheharlemshake

4 жыл бұрын

Personally I think they are ugly, but they are the cheapest now

@mikestang679

4 жыл бұрын

@@Theydotheharlemshake 99'-01' New edge look cleaner & a lot better, 03' & 04' Terminators are very undervalued right now, Graig Jackson says in a few years they will be were the BOSS 9's are now, buy low sell high scenario.....

@newmantv5668

3 жыл бұрын

whats a good price in the carolinas for them

@orionhenrik3439

2 жыл бұрын

Instablaster

Great info! I have a 94 SN95 with heads/cam/intake/vortec V3 supercharger/T5z trans/3:73s/off road mid pipe/shorty headers/It made 440 rwhp on a conservative tune. I know that’s not a lot of power by today’s standards. My son has a 2011 supercharged Mustang GT that made 650 rwhp and every time he stops by he wants to drive my car! He says the old sn95 is just a lot of fun to drive! Point being these cars are a lot of fun and can be had for not a lot of money...for now

@lollis_garage3683

4 жыл бұрын

dwrdyts mine doesn’t have a lot of power by today’s standards either lol it made 326hp 324 trq to the wheels but still a crazy fun car to drive! Thanks for the comment and view! 👍🏼

@Prestiged_peck

2 жыл бұрын

The things are just so much lighter!!!

@Motorfestreviewer

2 жыл бұрын

May I ask why so little? I also have a 94 with very similar setup but no supercharger and I'm pushing 400+

@Prestiged_peck

2 жыл бұрын

@@Motorfestreviewer you probably have a better HCI setup, possibly more compression, might also be that he isn't spinning it/has a big pulley on the blower so it's not making the power, plus boosted cars usually have a milder cam, especially procharger cars, which means he probably makes more low end torque.

@Motorfestreviewer

2 жыл бұрын

@@Prestiged_peck Okay yea my fault. I do apologize. Wasn't truly thinking mine is also a 5.0 HO

Anyone else notice the giant mosquito on my the side of my head lol!!!! As always guys thanks for watching and be sure to hit the subscribe & like button!!!

@zombieslogic8390

4 жыл бұрын

Haha I noticed... I didn't know what it was lol but I noticed

I just got one ! A 1998 Mustang GT Only 80k I’m excited. Already got it back on the road now time for mods !

@lollis_garage3683

4 жыл бұрын

Anthony Rodriguez sounds like it’s gonna be a nice project!👍🏼 94 to 98 is one of my favorite body styles

@itsraheem

4 жыл бұрын

great, are you planning on posting any videos?

@chrollo_the_collector6779

4 жыл бұрын

Anthony Rodriguez dude 20 more thousand u could have got a 2020 cobra mustang

@alexvit2973

4 жыл бұрын

@@chrollo_the_collector6779 He did not pay 80k dollars, the car has 80k miles

@yahirmier572

4 жыл бұрын

@@chrollo_the_collector6779 the 2020 Shelby Gt500 you mean, not a cobra

This is the perfect video for me, exactly what I needed!

Nice video man....keep it up. Can't wait to do my headers and exhaust.

@lollis_garage3683

4 жыл бұрын

Riding the Reaper SN95 thanks bro I appreciate it! And once you do it you won’t regret it. 👍🏼

Busted Knuckle you are spot on in this video! I have a 1995 GT with a Cobra intake ported and polished with 24 pound injectors, a Pro M 77 MM mass air and a performance chip. The 3.73 gears and aluminum driveshaft are a MUST! I tried the 410 but not good to go down to the Keys on the stretch. Make sure if you change the gears and driveshaft you get an aluminum flywheel also and don't forget about the reinforced U-JOINTS, trust me i blew mine. I have a Kevlar Clutch on mine and I really love it. Haven't done the heads or cam because my SN has been sitting in my garage. I'm older and I'm driving a fricken Buick Enclave now! My baby has long tube headers, Custom X pipe and we live in Miami so she is singing straight out 3 inch tubes. 40'S here so it's time for a time machine. Thanks for the inspiration, my time machine is in my garage right now waiting for some love. Haven't started her up in years. Calling my mechanic because of you. THANKS! This video was one of my favorites ever!

@toxicity6629

11 ай бұрын

Haha my mom drives that car 🤣

@toxicity6629

11 ай бұрын

The Buick I meant

@_youngstajae

9 ай бұрын

Did you ever get around to driving it boss??

very nicely made video. Looks like you have a lot of work in this car, came out very nice. Earned a sub from me.

@lollis_garage3683

4 жыл бұрын

Captain ThirdGen I appreciate it 🤟🏼

Sweet ride man you made me want to try out a 302 powered sn95!! Iv had 3 fox bodys and a 99 gt conv. 4.6 . my favorite though was a 1986 with a 347 stroker with a 750 quick fuel carb. That car waz absolutely nasty it redlined really high and pulled like a freight train!!!

@lollis_garage3683

4 жыл бұрын

really fast!! I like the 302 much better than the 4.6 mainly because you can make a lot more power for cheaper!! And I really like the sn95 body style, I’ve also thought about doing a 347 stoker build but just haven’t went through with it, thanks for the comment👍🏼

very badass! I love the carb swap. Those motors run so much better with the carb

@lollis_garage3683

4 жыл бұрын

thomas H I can agree with that it feels like it instantly adds hp even on stock motor

94- 98? 94's and 95' have a 5.0 with only 2 overall cats. Body wise they may be the same, but they are 2 different animals.

@eriv4735

4 жыл бұрын

Yea this was my exact thought lol

@loganhembree6164

4 жыл бұрын

They 5.0 didn’t make nearly as much power as the later produced 4.6

@KevinTatum88

4 жыл бұрын

Gotta disagree with ya 100% on that one, all I keep hearing is everyone wishing my 4.6 had a 5.0 instead for power. Unless these all are complete morons and know less than even me at this moment which im 2 weeks new to the 97 mustang i bought

@Fr3sh-Kush

3 жыл бұрын

@@KevinTatum88 yeah they are about the same 5.0 being a tad faster

@esh9x153

3 жыл бұрын

@@loganhembree6164 The 5.0 made the same power as the 4.6 until 1998, where it got a small upgrade to 225 hp.

Nice car! We would love a video about your fuel injection to carb swap.....

Nice looking sn95( I have a 95 cobra rio red 347 stroker with 355 rear ) you've got my sub

Thanks for the information will look at doing it on step at a time 👍.

This is a FANTASTIC video

Nice car thanks for your video

Nice car and awesome ending to the video sounds mean,I might be buying a 95 5.0 tomorrow

I wholeheartedly agree with that rear end recommendation. I have a 97 GT convertible I’ve had since new with 40k on it. I’m not a gear head, so I only wanted to pep it up a bit, and man taller gears made a world of difference.

Excellent choice of mods but, I highly recommend having the car checked and if needed corrected for body twist and straightness at a collision shop. Then install a good pair of subframe connectors, such as Global West Competition Subframe Connectors or Maximum Motorsports full length subframe connectors. SN95 Mustang’s are a unibody construction so power is transferred from the rear wheels via the floor pan and roof to some extent on coupe models. Hence they are subject to chassis flex which can lead to squeaks and rattles. And over time door and body panel misalignment or worse. The most cost effective solution is welded in subframe connectors. They are designed to transfer power directly from the rear subframe to the front subframe and avoid the dreaded chassis flex. Also the lower rear torque boxes are prone to damage by repeated hard launches. I’ve seen some damaged beyond repair. Welded steel torque box reinforcing plates will add significant strength and durability to avoid damage. Anyway thought I’d share my experience and knowledge of SN95 Mustang’s. I hope it’s helpful!

Helpin out brutha👍

@lollis_garage3683

4 жыл бұрын

No problem! 👍🏼

As soon as you said wake up the neighbors, I had to subscribe

@lollis_garage3683

4 жыл бұрын

dennis braxton I appreciate the support! 👍🏼

Subscribed!

@lollis_garage3683

4 жыл бұрын

J. Santiago thanks for the support! 👍🏼

Lol I thought you were going to crash the white car lol. Great video.

@lollis_garage3683

4 жыл бұрын

Haha nah man we ain’t about that type of mustang life over here! 😂

Keep up the good videos

@lollis_garage3683

4 жыл бұрын

Dustin Russell thanks a lot bro and I plan to try my best! I appreciate the comment! 👍🏼

@dustinrussell5225

4 жыл бұрын

I’ll be watching

I like your 94 man i got a 1994 white 5.0 mustang we gonna be starting too get parts for it

You had me at neighbor 😂😂 nice

Just bought a 96 cobra convertible i love it only has 75k miles funnnn car love it and its all stock!

Good video!

My 94 cobra is full bolt on. A/c power steering and emissions deleted. Heavily weight reduced. With a built drivetrain and rear suspension with a decently modified front suspension. The mods i have felt the most. Were 4.10 gears, solid motor mounts. Heim jointed rear control arms (upgrade from non adjustable tubular aftermarket ones) and torque box reinforcements (i damn near ripped the stock ones out on a hard launch) car had full length subframes when i got it so i cant attest to that. Other than those things. The only other thing i physically felt was timing adjustments. Now weight and small bumps in power from each bolt on have added up and helped alot but nothing you individually feel in a run

Good video

Global West round subframe connectors (welded in), strut tower race, Ford 3.73s and short shifter and stubbie headers were my 1st mods on the 95 Cobra. Had to build the foundation 1st before the go fast goodies. The subframe connectors, 3.73s and short shifter made a big difference in drivability fun; felt like a totally different car.

FINALLY FOUND THE PROBLEM WITH MY COBRA!! Which is ironic that your latest vid here covers gear ratio. Let's cover the issues first. Long story short, here were all the ailments that I was chasing while dealing my read end chaos. 1) First and third gears had lots of vibration and rattle type noise coming through the shift knob. 2) Floorboard vibration. It had both a stealthy type vibration and a "symmetrical" tap that I could feel through both the shift knob and the floorboard. Not a hammer on a pipe kind of tap, but a subtle one. 3) I would have this egg shape oscillating vibration most notable in fifth gear after 45mph. Being egg shaped and oscillating if will drive you crazy wondering how is that possible considering everything from the fly wheel back will have to be symmetrical if something is wrong. So keep that in mind while for the past several months dealing with rear end whine after I changed gears from 3.55 to 4.10s. Several months back I decided to go with 4.10s when I heard a couple clicks in the rear end when turning on top of all the issues mentioned above. Figured it would eliminate possibly one issue above plus the obvious click I heard. Also after u-joints got replaced, things went crazy. Long story short, ended up buying a whole new aluminum driveshaft to remove a vibrating issue, which can happen after u-joint replacements (that old drive shaft may have had something to do with the issue that was hiding all along). After 3.55s, the 4.10s had some whine but figured it would quiet down (also rebuilt everything while we were there. Nope, got worse eventually. Took it back, had them put factory 3.55's back in. Soon as I got it back, noise was there again and somewhat worse, just the speed at which it occurred changed. FYI, these guys knew how to gears things in. Took it back. Over the past month, they rebuilt EVERYTHING again but with their parts, even new ring and pinion. During rebuilt, the already knew carbon clutch disks were burnt up, pinion bearing was seriously stuck to the pinion, and one carrier and axle bearing were slightly jacked. Guys tried everything to figured it out. Finally said "F" it and told them to order a complete new rear end from Jasper. Of all the options they had, 327, 373, and 4.10's were the only ones I could consider. Went with 373's. So, with the old rear end off on the ground while waiting for the new rear end to arrive any minute. The head mechanic was just there staring at it like WTF is the issue, will never know, decided to measure the housing where the pinion connects to the yoke one more time. Basically with it off he was able to get more accurate with it. Suddenly, he notices the housing was egg shaped, on a very small scale. Not so much where a new bearing wouldn't fit, but enough to through the alignment off. I NEVER would have imagined it being possible to feel a symmetrical ticking in the floorboard and an egg shaped oscillating vibration at the same time from ONE thing. Figured it would two different things. Never thought egg shaped vibrations were possible unless driveshaft was in a bind. We used a dial but the driveshaft never showed any issues which is crazy. So long story short, with the new rear end, all those ailments are gone lol!!! Far as gear ratios go, I'm differ on 4.10 vs 3.37 for a daily. 4.10s demolished my first gear. I'd get an awesome launch but when it's time to shift to second, even grandma's 6 cylinder would cause me concern when it came to shift from first to second lol. Was shifting way too much in the city and 3300 RPMs at 80mph leaves me looking for another gear. 3.73 is feeling like a happy medium right now. Auto trans with 4.10 may have better RPMs but if you plan to go boost, traction will be an issue with 4.10s. Sorry for the book but the past several months was crazy with this car. As always, good vid!

@lollis_garage3683

4 жыл бұрын

Re1ik dude I’m glad you finally figured it out I would never suspected it to be that at all!! And yeah man I prefer 4.10s mainly because I mostly city driving but highway driving is a bit frustrating, but I appreciate the comment man and glad you found the issue, stuff like that will drive you crazy.

hey man if that red zl1 ever goes for sell hmu its like my dream truck, great btw!!

Not really happy with my stock '96 but this video has given me some really good ideas.

@lollis_garage3683

4 жыл бұрын

Awesome glad I could help!

Cool video I got the 95 GT, still got to put a short throw shifter in, and I agree, not much shifting overall haha

@lollis_garage3683

4 жыл бұрын

Thank you 🙏🏼 and I got the SVE short throw shifter in mine, I like it but I want the MGW.

@christianz344

4 жыл бұрын

@@lollis_garage3683 yeah ive seen those right around $200. I saw a couple for like $50 if they're good they're good you know? Lol might look into it. I also gotta get a hydro ebrake, I'm building mine for drifting

Just got my 97 SN95 I’m boutta do some mods to my girl now thanks bro

@lollis_garage3683

3 жыл бұрын

I hear that bro and your welcome 🙏🏼

Great content. Car looks good and sounds good. Where did you find those seats? What brand? I need some for my 98

@lollis_garage3683

4 жыл бұрын

Bushido Bell I appreciate it! And seats I got from lmr.com a little over a year ago I’m not sure if they still sell them but they were the sve s3 seats, there made by tmi. So you if lmr.com doesn’t have them check tmi products.com on google and search there site

@bushidobell4000

4 жыл бұрын

Thanks for the reply

Nice video like my 98 Mustang

@lollis_garage3683

4 жыл бұрын

Thank you👍🏼

@mustang9860

4 жыл бұрын

Check out my mustang and tell me what you think

Beautiful ass car !!!

@lollis_garage3683

3 жыл бұрын

🙏🏼 thank you!

Just bought mine today, been up all night listening to exhaust. Bought New headlights, Cold Air intake, Mach 1 Chin spoiler, a new shift knob (putting off short shifter for now) tomorrow i'm going to get a quote on muffler delete and probably do that until Summer when i can put on loudmouths.

@lollis_garage3683

3 жыл бұрын

Loudmouth is a good choice

@chrisperry2754

3 жыл бұрын

@@lollis_garage3683 I had it on my 03 7 years ago and I loved it on the 4.6. Thanks for replying man, I just got my car off the lift at shop just now and found out my stock exhaust is healthy and well and I already have flowmaster mufflers. Definitely going to let it stay that way until I get the loudmouths.

@lollis_garage3683

3 жыл бұрын

@@chrisperry2754 no problem hope your project goes smoothly 🤟🏼

Just bought a 95 GTS with 36k miles 5sp !!

SN95 GANG!!! 🤙👌

Will I need to do anything w tuning if I upgrade my intakes? Do you suggest just putting a cobra intake on my gt? It’s 95 sn95

I have a 94 in great shape like yours. I like that set up we need to talk when we are able tire size etc ok friend

I bought a 97 mustang gt 4.6l onky 28000 mikes , the car is flawless , its has an h pipe on it with catalytic convertes delete . Im not to sure if the headers were changed , how do i know if their stock headers or after market ?

Theres a snake in my boot! Lol

Could you do a video on your fuel pump set up and how you have it run on your carb? What fuel pump do you have? Any info would be greatly appreciated!! Keep the videos rolling bro!

@lollis_garage3683

4 жыл бұрын

Vernon Yow yeah I’m sure I could throw that in a video soon! Thanks for the comment and the support!!👍🏼

he's a good man!

What size are your wheels and tires/car looks amazing 👌🤙🏻

@lollis_garage3683

4 жыл бұрын

Moises Rodriguez 18x9 front with 245/40 and rear is 18x10 with 275/40! And thanks bro!👍🏼I appreciate the comment!

@moisesrdz3408

4 жыл бұрын

BustedKnuckleProduction welcome bro 🤙🏻🤙🏻

I should be doing my headers soon.. Was thinking tho.. if you went with a trickflow stage1 or anderson n41 cam..you could pick up more power and would probably be very effecient with your heads. The trickflow stage1 cam is very similar to a e303 with the exception of having a split profile for the exhaust. Stage 2 trickflow is where its at tho in my opinion ;-) I know im not telling you anything you dont already know. Just throwing it out there.

@lollis_garage3683

4 жыл бұрын

HorsePlay Motoring lol it’s cool man I actually have a lunati cam that was in the car but it was .587 int. 572ex. And 240 232 duration at.50 but it’s rpm range is just to high for a stock bottom end car I already found that out the hard way 😂, And I love the trickflow cams! I really thought about getting a stage 2 trickflow cam, but I already had the E303 and so I just put it in for the meantime, until I save up for the 347 stroker. As always man I appreciate the support and comments much love horseplay!! 👍🏼👍🏼👍🏼

I recently acquired a 1995 SN-95 for free kid thought motor was blown, nope just a head gasket maybe the head. So I ripped out the 302 and decided to upgrade the the block bore and all. Downside it's Automatic.... But it has the 91 F1SE BB thunderbird block Ford wanted to use for the Supercharged TBird, but decided to scrap that idea kept the blocks and some Sn-95's got them, A bit thicker block compared to the regular E7TE's but still afraid to add boost.

@lollis_garage3683

3 жыл бұрын

I’ve had buddies run boost on stock 302s for years and beat the crap out of them, what kills a 302 is vibration, rpm and bad tuning. I mean of coarse and Absurd amount of boost will kill one as well but I have friends that run 10 to 14 psi on stock block for a while

1st mod. Sticky drag radials out back. 2nd mod. 150 shot of NOS for stock motor. 3rd. Exhaust. 4th. 3.55 gears for T5 models and 3.73 for AOD.

Just looking at a 1995 Ford Mustang Coupe 2D for 2300 71k for miles I view it tomorrow before 4 est central time I’ll be following the channel

Chido

Hey man watch a bunch of your videos how do I know what intake I need so I can make it carburetor

Busted, did I miss it somewhere about correcting the speedo for 3:73 from 3:08? Did you do this?

@lollis_garage3683

4 жыл бұрын

2wattsout yes I didn’t mention it in this video, but I did make another video on doing it, if you like you can check it out.👍🏼

What gear ratio would you recommend for a gt 5.0 manual convertible that won't be used to race? We will be driving town but I am going to try and make it comfortable for highway runs to other states.

@ostrich67

Жыл бұрын

3.73.

I have a automatic 1994 mustang 5.0 HO 302 all stock, what mods should I do first to add HP also still be able to pass smog

@lollis_garage3683

3 жыл бұрын

I’d start with the bolt ons long tube headers, since you have to pass smog id probably do high flow catalytic converters, some type of cat back exhaust, cold air intake, BBk throttle body. I’d start there and work your way up bro👍🏼

Hey man I’ve been trying to figure out what performance mods I can do here and still pass smog. I live in California. Do I just need the California compliant sticker or are there other factors? If you know lol

@lollis_garage3683

Жыл бұрын

I honestly don’t know about the California stuff? 🤷🏼‍♂️ best thing I can tell you is love to Florida 😂

Previous owner did 4 and 5 for me, still have to do the rest ;)

@lollis_garage3683

4 жыл бұрын

QuackGarage hey at least it had some mods already done but good luck with your project and thanks for the view and comment! 🙏🏼

@quackgarage9551

4 жыл бұрын

@@lollis_garage3683 Thanks! You got a pretty nice SN95, already subscribed. I'm currently trying to figure out an ECU problem (I will probably need a new one or even a tune) but after that I will post some videos too.

@lollis_garage3683

4 жыл бұрын

QuackGarage sounds good man and KZread could always have more car content 👍🏼

I love my cobra even tho it’s rough

Was it a stick originally and what are you do about the tack input so the tech works when you put a different distributor in it

@lollis_garage3683

4 жыл бұрын

Tim Titus I ran the a tach signal wire off the distributor, to the factory tech signal wire so it would work

@timtitus2823

4 жыл бұрын

Wish I knew what wire that is because I'm getting ready to put a carburetor on my truck got an F250 96 got a zf5 going in it transmission that is it has e4od

@lollis_garage3683

4 жыл бұрын

Tim Titus I’m not sure which pin on the trucks but the mustang is pin #7 you can google it and probably find what you need I’m sure.

Is the red Z71 pick up for sale?

I would add the exhaust at the same time as the heads, cam and Intake cause you have to take the headers/exhaust manifolds off to seal the heads

Good video. Why did you carb swap it though when fuel injection is more effiecient?

@lollis_garage3683

2 жыл бұрын

Mainly because I can do the tuning myself, and also hp per dollar is cheaper on a carb set up.

Hey man what seats do you have? Those look really good thinking about getting those for mine!!! :D

@lollis_garage3683

3 жыл бұрын

I got mine from LMR.com but they no longer sell them so look at TMIproducts.com that’s who made the seats originally and LMR was selling them for a limited time

@juliusramirez4627

3 жыл бұрын

@@lollis_garage3683 hey thanks for replying man I appreciate it!!

Where you get those seats from???

Smog pump to egr on stock headers??

I used to have a 95 5.0 5 speed, 1st mod where tires, suspension, rearend gears, exhaust and ignition, then e303 cam , tb , gt40 heads ,smog delete

Is there a reason why people go shorty over long tubes on these?

Are the pistons factory or aftermarket

Please dont forget to add an adjustable clutch cable and quadrant with the shifter upgrade it does wonders!

88 MPH? Great Scott Marty!

that hair tho

do you know of a exhaust with catalytic converters that hook too long tubes I still need to pass emissions in Indiana

@lollis_garage3683

4 жыл бұрын

Mr smiles # I know that lmr.com sells a bbk catted x pipe. That’s supposed to be emissions state friendly. Hope this helps!! 👍🏼

@Mike-kz7sp

4 жыл бұрын

sure does thanks man

@ambermi8792

3 жыл бұрын

I'm in Indy got straight piped gt 95

Where'd you get the seats

Where can I get a set of seats like that for my 94 cobra?

@lollis_garage3683

3 жыл бұрын

I got them from LMR.com but they no longer sell them so look on TMI.com you should be able to find them there

What kind of seats are those???!

Curious if you have run it in the 1/4 mile... how did it do?

@lollis_garage3683

4 жыл бұрын

Haven’t yet there isn’t a 1/4 mile close to me but I’ve ran the 1/8 in 8.2 with a 1.9 60ft so it should run 12.7 or better in the 1/4

Mustang fan here! Couple questions: I have a 98 GT. Comps, cams, air intake along with a whole bunch of other stuff. Mine sounds extremely throaty in comparison, idles at 800 Rpm. I did get it tuned at Shelby with 517 hp, 537 torque at the wheels. I do have more stuff in it but naturally aspirated with the same 4.6 block. What did I do different to make it sound loud and throaty? I’m scratching my head....

@TheModAddict

3 жыл бұрын

What is a whole bunch of other stuff? Any of that nitrous, supercharger, or turbo?

@JohnnyJitsu11

3 жыл бұрын

@@TheModAddict let me try and remember everything. Flex plate since it’s automatic. Ignition packs, cold air intake, Valve springs, had to forge pistons, stage 2 cams and heads, intake manifold racing, headers, h pipe with dual catalytics, 4:10s and its automatic, drag radials staggered 17s front and 18s back.... might be it I think....tuned at Shelby motor sports

@TheModAddict

3 жыл бұрын

@@JohnnyJitsu11 if you make that kind of power NA you hold a world record. Also when i wrote shelby less than an hour ago they said they dont tune 2vs and never have.

@JohnnyJitsu11

3 жыл бұрын

@@TheModAddict hmm interesting, because I got it done at Shelby motor sports here in Las Vegas Motor speedway. Cost me around $600 and had to come back because I didn’t have the correct gear ring for the 4:10s. I am far from a world record, considering it’s still naturally aspirated and have so much to do. I need a new tranny and axles, this way I slap more power to the wheels. I’m afraid it won’t be street legal then. Not sure why would Shelby say that, which one did you call?

@JohnnyJitsu11

3 жыл бұрын

@@TheModAddict I asked you that curious question of mine, because I’m only talking about the “throaty beefy sound”. Which I don’t think would come from anything else other than my exhaust, which is closed btw. Headers, cams and heads. Am I right? Maybe a little of hissing from the intake...but not the “throaty, beefy”...

I knew that a "cold air" intake was going to be mentioned. This is proven to be purely cosmetic. If you are doing it for looks, rock on. Just don't expect any more power. Ford knows better than any small business how to get air into the engine, and emissions don't play a factor in intakes.

Good info on the rear end gears, I need 4.10 's in my cobra

@Re1ikGaming

4 жыл бұрын

Are you sure lol? Drag car or street/strip? If you have a standard and it's your daily, I'd have to say you may want to reconsider. I just went through 4 gears changes in past 3 months lol!!

@94cobra_kid84

4 жыл бұрын

What gearing did u end up with?

@Re1ikGaming

4 жыл бұрын

@@94cobra_kid84 From 3.55 to 4.10s, back to 3.73s right. I have a standard. My 96 cobra is factory and is a 5 speed. I like the 3.73s so far. A little more quick on launches and not running 3300 rpms at 85 mph lol.

So whats first!? Intake Headers Exhaust Cam?

Smog pump delete?

What kind of seats are those I love them

@lollis_garage3683

4 жыл бұрын

Alon Cullins there sve s3 seats!

@the_slow_s197

3 жыл бұрын

@@lollis_garage3683 do you have a link to where I could buy them at?

@lollis_garage3683

3 жыл бұрын

Jeremiah Trejo look at TMI.com you should be able to find them there.

@YungmasterG

3 жыл бұрын

@@lollis_garage3683 are they comfortable?

@lollis_garage3683

3 жыл бұрын

MASTER G I think they are comfortable it’s firm but not to firm! 👍🏼

Y'all still around?

Would a 3.73 run well with the 5spd?

@lollis_garage3683

2 жыл бұрын

Yes it would be fine

I have a ‘98 cobra convertible, any ideas for mods? It is standard from factory.

@lollis_garage3683

4 жыл бұрын

Stuart McDowell first mods I would do would be basic bolt on such as, cold air intake, exhaust, throttle body, that’s what I would start with, and then go from there. 👍🏼

@stuartmcdowell1822

4 жыл бұрын

Hey bud thanks for the quick reply. I will look into them. I’m not liking the front seats any ideas for better ones?

@lollis_garage3683

4 жыл бұрын

Stuart McDowell mine are sve s3 seat, I got them from lmr.com but unfortunately they don’t sell them anymore, so look on tmi.com they sell the exact same seat!

@stuartmcdowell1822

4 жыл бұрын

Thanks once again. Great content

@silentshredr

4 жыл бұрын

Shifter, gears, subframe connectors and a cheap centrifugal supercharger setup

410 automatic 373 rear gear for 5 speed he got it backwards

@lollis_garage3683

4 жыл бұрын

Greg Smith just my opinion bro👍🏼 everyone likes different things though, I definitely appreciated the comment sir! 👍🏼

@MrSeanthedon369

4 жыл бұрын

My 5 speed come with 373

Same for cougar?

what distributor are you using?

@lollis_garage3683

4 жыл бұрын

Isaiah Kidwell hei street fire! 👍🏼

Where did you get the steering wheel Adapter

@lollis_garage3683

3 жыл бұрын

Americanmuscle.com

I need help fixing mines rn can’t really decide what to do can anyone help out ?

Looking for a key for 97 mustang

So are all these upgrades worth it? I try looking this up online and people just keep saying that without swapping the engine with a coyote it just won't ever make the same horsepower that even a modern SUV makes. Just seems like it'd be better to buy a newer mustang than dump 10k into parts on a 4k car.

@lollis_garage3683

Жыл бұрын

Just all depends on what you want , with a stock bottom end 302 car a safe hp number is around the 550 wheel range which is about what my car makes now on nitrous, but even a nice first gen 13-14 mustang gt is gonna run you 20 to 30k. In my view I like taking the the 4K car building it and making it what I want

What’s the mpg’s lookin like on that beauty?

@lollis_garage3683

3 жыл бұрын

I get 18 to 20 on the highway and around 12 to 14 city

If I add new gears will I still be able to cruise pretty easily in traffic and in town

@lollis_garage3683

2 жыл бұрын

Yes you should be just fine, my car with the 5 speed and 4.10 gear cruising at 70 mph I’m turning around 2700 rpm which isn’t terrible

The seat look good in that car. What did you use?

@lollis_garage3683

3 жыл бұрын

At the time LMR.com was selling them they’re the sve s3 seats but they don’t sell them anymore you can find them at TMI.com now, and I appreciate it 🙏🏼