I prefer these types of videos. It's the real deal, no pre-arrangements just, "This sucker doesn't work right and I've got to figure out how to fix it." That's real life. Good stuff.

@kelvinrandolph1874

5 жыл бұрын

Right right right I am a lifer

@kenmarriott5772

5 жыл бұрын

Yes, you learn more this way and makes the video more fun to watch.

@joanncole6946

4 жыл бұрын

Kelvin Randolph hashtag

I am an old mechanic from waaaay back and really envy your patience and tenacity. Not changing parts before knowing for sure what is the CAUSE. You are a fine example for your peers and those who in the future. Much ablige:):):):).

@ScannerDanner

7 жыл бұрын

Thanks brother!

@rodx5571

7 жыл бұрын

I get bitched at, at the shop sometimes for doing the "check every possibility" methodology you teach due to time, however, when no one else can figure it after throwing parts at it, it becomes my head ache and i get it every time. So thanks for what you do i have learned alot. Thinking outside the box, and approaching things from a different angle. Also, i am a devout "sccpe guy", i diagnose plugged cats with an in cylinder transducer doing running compression tests, home built transducer set up with tons of home made attachments. 15 years in the shop, and your vids inspired me to "up my game" by learning the scope about 3 or 4 years ago. Now its the first tool i grab for diagnostics, if i can figure out a way to do it.

@donaldbishop7550

6 жыл бұрын

Rod X 1!!

@jerrychacon8814

3 жыл бұрын

I've had cars that don't start and all it was is a loose fuse,or wire disconnected

@phillblack1745

3 жыл бұрын

@@ScannerDanner hey man I have a serious question if you can help me with 91 F-150 5.0 manual 2wd randomly between weeks months to years I don't know randomly the truck will fail the ECM brought burn it up destroy burn up ignition module on the side of the distributor burn it destroy or it will rarely get the coil do you have any suggestions to what I can start looking forward to try to fix this problem for good can you give me a general direction like look at the ignition module wires or the engine harness wire pin number maybe this could help ground on driver side under radiator I'm just saying anything this is my only vehicle man and it's going on two to three weeks being down and it is starting to really hurt my wallet and put me a very bad position so thanks for anyone anything plz

You are a TRUE Tech. There are so many parts changers who think they know what they are doing. But don't know if their butt is bored or punched. Thank You!!

@ScannerDanner

9 жыл бұрын

Kenneth Shilts thanks Kenneth!

1988 ford f150 here! Just wanted to say without this video I'd be bigtime screwed. Was able to chase down and rule out many factors in my truck. You sir are awesome and very knowledgeable . Ty ty ty

@ScannerDanner

4 жыл бұрын

Awesome

Paul - YOU are a SUPER TECHNICIAN AND INSTRUCTOR. I do know that you can properly diagnose and repair any vehicle . I am 100 % sure that you have forgot more technical info than I even know and one of your greatest traits is you are honest and able to admit if you have overlooked some needed test or possibly missed something. That being said , there is NO DOUBT , you WILL ALWAYS find the problem. MANY , MANY THANKS for ALL the LIVE troubleshooting video's you post. 😊😊👍👍👍👍👍✌️✌️✌️✌️✌️✌️🧐

@ScannerDanner

2 жыл бұрын

Thank you so much my friend

we need more people like you in the world!!!!!! wish you were my automotive teacher

@raedghaith4778

3 жыл бұрын

He is an automotive instructor

thumbs up for crawling back under for the 02 reading :)

I like the way you explain your attitude toward customer expectation vs reality and charging out for your time, especially with vehicles that have multiple issues. I also like the way you emphasise road tests before and after repair, it can be difficult, especially when pressured for time. Really enjoying your videos on this and your premium channel, time and money well invested IMO. Keep up the good work Paul, you are an inspiration to your viewers. Doc...

In some ways older vehicles can be harder to diagnose than newer ones. As you said, it is a lost art. There's nothing quite like the feeling of getting a "vintage" vehicle back on its feet, when most of its brothers are long gone to the junkyard in the sky :)

@Cruiser777

Жыл бұрын

All that said I Rather have an older vehicle You don't have to take half the vehicle apart to get What Your after And you don't have to buy ten thousand dollars scanner either

The best padding for under car work that I have found is a piece of thick carpet. You can get these at any carpet store, in almost any size, for very little money. Just keep it rolled up and laying in the back of your truck. It insulates from the ground well, even on snow. Just get a THICK one. Also, for a "headrest", the boat seat cushions that are about 15 inches square work well. They are about 3 inches thick, and have flexible "throw handles" on two sides. Cost is about 15 dollars at any outdoors store. Also, one of the blue utility tarps available at any tool shop or outdoors store can be very useful for keeping the carpet dry. Working underneath a car in cold weather is tough enough, but if you can find ways to stay very dry and not have to feel all the rocks and ice on the ground makes a big difference. And Paul, you might try wearing a cap (you know, a winter cap, not a baseball cap)! Hang in there.....

Mr. Danner, you are an amazing auto technician. Sure wish I had you for a teacher in trade school. Thanks for all the great vids.

Great video! We all appreciate all the sacrifices you make to bring us such great video content. I really like the "field" videos the most. I've been mechanic 13 years and learn a lot from you and your brother

I am a retired auto mechanic from long ago. It’s nice to see a real video from a real mechanic. I just replaced (sucked in) throttle body gasket and cleaned all the crap out of the inside of the throttlebody that fixed my problem. Oh I changed o2 when I did the starter. Thanks!

Actually we could get data from the sensors,but not from the self test connector. The EEIV monitor hooked directly into the 60 pin ecm. It is like a break out box with a LED display. So it was live unprocessed data with a knob that rotated to view different sensors. Great video Paul, it brought back a lot of memories!

Paul, Great vid. I've seen you lay in that same parking lot time after time. I have a dirt drive way in front of my garage so I feel for ya! Little tip if you ever see a old weight lifting bench on the side of the road, grab it. The cushions on them are great for laying on the ground and are very portable because of there compact size. Perfect for Pete's parking lot and will make a perfect addition to your mobile tool chest!

New owner of 1990 f150 with pretty much all the same issues thanks for the real world diagnosis!

I find it amazing the different things that can cause performance issues like this. I have a 2004 Honda Odyssey that was giving all kinds of codes from O2 to rich on bank 1 to lean on bank 1 to Evap system . . . . . Long story short, the little rubber grommet on top of the fuel pump (inside the sending unit assembly) had cracked and was flaking off. After a ridiculously long search, I was finally able to obtain one and replaced the broken one. Now, the thing runs almost like new. Before that, it would run great with a full tank of gas, but once it dropped below 1/2 tank, it would hesitate and balk, sometimes nearly die out completely!

I just can't believe how good and honest you are. Don't ever change. Good people will see it even when u think no one is looking.

@ScannerDannerPremium

9 жыл бұрын

God bless you my friend for those encouraging words. I truly appreciate it.

I saw the correct mark on the crank pulley at 3:52 minutes from beginning of the recording, it was the collected dust and oil which mislead you. I do not blame you as it happened to me as well. You are doing great, well done. It is a pleasure to watch your videos. Thank you very much

@TheSouthernTennesseerailfan

3 жыл бұрын

Good eyes kid

Paul,you're the real deal,genuine,nothing fake in your videos. Love that!

When I was in auto school they taught me how to time those, now that makes me feel old, hopefully though this will give the younger techs and diys and idea on what we were working on back then. Also made me think about when I fixed up a 89 crown vic for my brother that had a egr pos code. It was a bad pos sensor, and it made me go through the same process on my old snap on brick,lol. Nice job Paul.

Any time you see a deep notch in a crank pulley that is used for a magnet pick up style timing probe. If you had an old snap-on counsler II they use to have the probe adapter. But who has one of those old dinosaurs.Oh wait I do haha

@ryanhell6028

5 жыл бұрын

South Main Auto Repair LLC Hahaha It’s weird seeing your comment on here from 4 years ago ........ look at you now You two guys are the shizzz Scanner Danner, Eric O = GOAT !!

@pinkys310

3 жыл бұрын

@@ryanhell6028 ibis BBC h

I learned a lot from this, I especially like how you verified o2 circuit integrity. Great work, Thanks Paul.

I know this is one of your older videos man. But wanted to say that once again, you are teaching me a lot about a vehicle i buy to fix up. I know almost nothing about fords and currently have it tore apart. Removing smog and egr systems, new gaskets etc etc. Thanks a ton.

@ScannerDanner

Жыл бұрын

I have a bunch of EECIV videos for you! Glad you found me. I can help too

that was great.watching you change direction and going beyond the egr valve and testing the o2 sensor with the test light was really fun.thanks for the after shot on the o2 sensor because little things like that make your videos better than others.people say old school cars are easier to work on but data from computers really helps for direction.that was great troubleshooting.

That 300 inline 6 engine!!! Tough as nails i refuse to drive anything else. Best engine ford ever made

@anthonyskorner4511

4 жыл бұрын

I had 1 and it was garbage.

I just got an 88 F150 with the 6 cyl that is exhibiting the same faults as this truck... stumbles at part throttle with the EGR hooked up, unplug EGR and it runs great. The valve itself moves fine, vacuum control is fine, and the position sensor measures OK. I hadn't thought to check the O2 sensor - now I know where to look next!

What I have found helpful when I use to work on the older engines a lot Is to take a wire brush or a piece of crocus cloth and hold it against the harmonic balancer underneath the vehicle while the engine is running. It works really well when trying to find the timing marks on a balancer especially when your degrees are on the balancer instead of the timing tab.

@ScannerDanner

6 жыл бұрын

just be careful right? :-)

@freddyg9026

6 жыл бұрын

Safety first :-)

I actually wish I was able to go to the states and be taught by you. If you ever come to Ireland, please let us know on your website. I want to shake your hand and thank you for all the things I have learned from you.

@ScannerDanner

7 жыл бұрын

Thanks so much!

Another great video. Thanks. Working on those old rigs sure make OBD2 a dream.

Been a Mechanic for 30 years. I always Cut my hood Strings. Got mine grabbed 29 years ago.lol Love Cardboard used it for years. In Cold Wisconsin, It works great in the winters.

thanks for taking the time to show a known good 02 sensor on a pre obd2 system.

As always thanks for all you do! Reminds me of a problem child we had that I posted on iATN in 2013. Same type of scenario and outcome sort of... 1999 Jeep Wrangler Sahara 4.0L Hesitation, Surge, Cuts out, Stall, Misfire, Intermittent Sensed The scanners reported a weird #4 misfiring --- so we went down that rabbit hole big time - shame on us. Probably we were psychologically motivated to pursue that angle because we we scared the rebuilt engine that we at the time we recently installed was awry and that would be blood on our heads. Here is bottom line summary as I closed it in iATN "Well here we hope is end of story. After persistence on part of tech collecting scan data it was apparent that on occasion O2 sensor output was weird. We electrically tested circuit and settled on the sensor itself. New OEM sensor installed (consulted with dealer master tech first) and vehicle running perfectly. Now O2 output not just fuzzy perfect but always spot on perfect. Finding this eluded us because O2 output seemed OK enough (and was 90% of time) - but that "hidden" 10% was kicking our tails. Also sometimes it pays to just ignore a mystery and go for the obvious. We believed the tombstone miscount graph (still there! consistently! still mystery to all including dealer master tech consultant) was clue to problem. When the common O2 sensor drop out seems to have been the cause of driveability problem. "

This is why I want to buy a classic old pre any computer, sensor, relay, emissions truck. And when I open the hood I want to see a battery, a fuel line that runs to a carburetor, a coil, a distributor cap, 6 or 8 wires from said cap to 6 or 8 spark plugs and that is about it. You are great at what you do Dan! But I do not want to be dependent on all the test equipment and scanners that you have. Nor could I ever justify buying them. I also hate paying someone else to fix stuff I own. I just can't bring myself to do it. Like I said you are great at what you do and people need your skills. You are a dying breed. Most places just throw parts at it until it is fixed. Trouble shooting I think is a lost art. And someone that can do it are the best mechanics. Former US Army CH-47 mechanic.

@ScannerDanner

4 жыл бұрын

you have to look past the fancy stuff and apply what is here to the equipment you have my friend. thanks!

@dcummings7253

4 жыл бұрын

@@ScannerDanner Yes I understand that. I'm just looking for something with less of it.

@ScannerDanner

4 жыл бұрын

@@dcummings7253 just remember me when the silver bullet channels aren't cutting it for you on a difficult one okay? I'll teach you to fish, not just hand you one :-)

@dcummings7253

4 жыл бұрын

@@ScannerDanner Not sure I understand you. I really don't watch car channels. I'm just old fashion.. My dream truck is a old M37 or dodge power wagon. With the flat head 6. And drive it as a truck not a show piece. Don't get me wrong you are great at what you do and I thank you. You helped me get my 1987 F-150 running again. Honestly you are the only real guy that I have found that is a normal person. Not someone with a huge shop and a bunch of shit that no common man would ever own. Keep Doin What Your Doin ! PS You already did teach me to fish with the 87. Thanks again!

Hi Paul, I found your channel a few month ago and watched your all videos but still watching your both channels every day. I learned a lot from you. Thank you very much

Thank you for filming all of this. Folks don’t get the conserntraion it takes to repair older cars and trucks.

i have this exact same timing light and its gotta be over 15 years old now still works like a charm, also remember the fan blades are invisible when spinning watch your finger tips it doesn't feel good usually wont cut ya

timing light! That brings me back!!! Done one on a rebuild of a ford 302 two weeks ago..... 1973 Comet....

Good tip on "cause or effect", it's tricky to distinguish between the two sometimes. EECIV is one of my least favorite systems to diagnose. On the previous video, I would suspect a bad splice, but with no good info on older systems it can be tough. Good fixes!

Excellent, I'm still back tracking, I had these symptoms initially, changed the O2 and still had same symptoms, so I changed the a bad hose on the fuel pump but in addition my truck stops running intermittently, no check engine light on key position, no start, crank. 00Mazda B2500SE 2.5L I have no diagnostic tools except a volt meter & test light. Thank you for sharing your knowledge & experience.

@ScannerDanner

6 жыл бұрын

find out what you are missing when it doesn't start. these videos may help kzread.info/dash/bejne/hWR61ZSiXbuoe6w.html kzread.info/dash/bejne/hYmsw8mIcbm5ZbA.html

@Ax4400

6 жыл бұрын

With the car key in On Position found the Relay that Controlled the Check Engine Light and Changed that Relay (Auxilary Power PCM?). Now my truck starts Dan. Approximately what is the most I should I pay to get a Full Diagnostic Scan at the Dealer where I originally bought the truck? Don't have any codes and have to put the truck back together before I can road tested it. But I did leave the engine running for over an hour and it didn't die.

I've used a welders wire brush to clean the rust and crap off of the harmonic balancer while he engine was running. Makes it look like new, and you can see every timing mark that's on the balancer. A lot easier than guessing.

@kellismith4329

Жыл бұрын

We also have luxury of the google tool in our pocket where we can quickly locate info like “ford 4.9 balancer marks”

It’s nice to see someone that that really loves his job

You sir are top of the line. A1 THANKS FOR THE FINIAL RESULTS ON THE O2

I have a 1990 , 4.9L. is not running but steering pump , took over my fixings at the moment. 75 years old here. Larry. South Florida

thank thank you for all the testing because this just found out the problem why my truck has been acting like it has for the last 7 months it has been acting the same way hesitant surging low power I've changed so many parts and still had the same result

Thank you for sharing your knowledge with us again Zen Master !

Hey Scanner Danner, I really really appreciate you going through all you did to fix this one. It was a lot of vital points in this video that i'm pretty sure can help me figure out my little issue i'm having with my 2004 Ford F-150. My 2004 F-150 starts up strong and idle's good and smooth, but as it starts getting warmer, it starts to having a vibration, not like a ignition misfire, but like it's getting too much fuel because it burns gas faster than usual, and when i stick my finger in the tail pipe i get this black stuff on it like a rich carburator. Your stuck 02 sensor/bad 02 sensor fix that made that truck run smooth without the mis, just might be the same issue i'm having with my idle. I know it's a lot of variables that can cause a ruff idle but from this video i'm gonna check my 02 sensor's. Nice video👍 Thanks!

@ScannerDanner

4 жыл бұрын

we need to know what your fuel trim numbers are showing during this condition

@funkcrewbandonly1

4 жыл бұрын

@@ScannerDanner Hey Danner, My STFT, (bk 1) is -1.6 to 0.8% STFT (bk 2) is around the same as 1 LTFT (bk 1) is 12.5% and getting higher as it warms up. LTFT (bk 2) is 7.8% maybe you can just about tell what would you check. Thank You! Scanner Danner🤛

@funkcrewbandonly1

4 жыл бұрын

Hey Danner, Now that my f-150 is warmed up, the LTFT (bk 1) is 10.2% and holding steady. My LTFT (bk 2) went from 7.8% and is now 9.4% at 180° Thanks for your opinion Danner👍

@ScannerDanner

4 жыл бұрын

It could be a misfire. Do you have access to a global scan tool where you can read mode 6 data? You can find Fords misfire counters there

You are a genius!! Learned so much from you!! And I'm currently in a BMW step class! So need all the knowledge I can get! Lol

Man I'd love to go on some diags with you sometime been working on cars for 5yrs in the field. Mobile repair is the best to learn on live problems with no codes. I have the u scope and a 2 channel. I appreciate the time and effort you put into your videos. I met Eric at SEMA. It's easy for people to talk trash online. I'd like to see you speak at SEMA. Or come out to my shop when I build one. I have cardboard.

Ur system approach is very good.one of the best techs in the business

Paul, thank you for the things that you do , that you don't have to do but you still do it . I really appreciate it.

Great throwback video. Got worried there in the middle of the video that the exhaust leak you mentioned early on was causing a faulty O2 reading. Nice diagnosis.

I think this is one of the better in the field video's you have ever done. You didn't seem as stressed as I have seen you before. I have worked on many trucks like that and I was screaming for you to check the O2 sensor. LoL. I don't think you heard me though. They only try to correct for so long before they go into open loop. I have also seen EVR solenoids stuck open allowing uncontrolled vacuum to the EGR. I'm kinda glad they don't build them like that anymore but at the same time I miss the simplicity.

I love this video working on old school technology nice fix thumbs up

This video is 9 years old. And I have a 1995 ford f150 5.0 and I just literally did this yesterday lol

A little tip for you and your fans, watches and rings don't play well with engine compartment. Great video, OBD sure help us out :-),

how can anyone dislike any of your videos? they are all informative. Thanks again

@ScannerDanner

7 жыл бұрын

because a lot of people just want solver bullet fixes, not long how-to videos

This was the best video ever made...Why? It shows you're human!

Hi Paul one of the things I have done is take out number 1 spark plug and put a probe down there and turn the engine by hand for top dead centre, then maybe back I little to ifnd the timing marks, fool proof way if your on the right cylinder, am I right in saying with zero volts at the oxygen sensor it will run rich, I had one once with a broken wire and it ran really rich...anyway good informative video thanks Fred uk

@ScannerDanner

9 жыл бұрын

In closed loop yes.

Great video as always Paul! I really like these videos were we can see you in action and that you don´t leave anything out! Have a nice weekend!

I'm learning more from your cockup videos than I ever learned from anyone else's regular how-tos. Probably because this is my style. lol

Old video I know, but that large notch in the pulley is for the pickup on the big Allen scopes we used to use in the shop. Big thing on wheels with a swing arm full of connector cables. There was usually a hole in the end of the timing cover marks to put the probe in. I miss those machines. ;)

That was great I did the same truck a few weeks ago and my verus was doing the same thing going back and fourth not sure why. Thats a great tip on testing O2 wiring

Hey Paul long time no comment…. Love coming back to watch your older videos, especially if they are about the old fords pre OBD …. I’ve got a super rich running engine I’m dealing with on my 86 e-150 302 going to check the MAP sensor and scan for codes tomorrow! This motherloving truck keeps biting me 🥶 It’s a habitual line stepper 😅

Great video! You posted this video at the start of 2015 and say then that there aren't many such vehicles on the road anymore, and also that you can't easily access diagnostic information. The former's true, but the latter not so much. I have a breakout box (BOB) that I use with my 1988 Bronco II (220,000 miles and I'm the original owner) that has always run like a champ, up until last week. It started dying at idle or slow speeds. The engine abruptly cuts out, but will start back up again without any issue. I've had it idling for an hour in my garage without any stalling. Then I took it out for a run to the grocery store and back without any problem, left it idling in the garage and it died within 5 minutes of returning home. There's no stumble, it just cuts out dead. Scoping voltage at all the sensors through the BOB, as well as the secondary ignition from the coil, doesn't show anything wrong and there are no codes. Well, dang! I think it must be temperature-related and needs to reach a certain temperature before it starts acting up but so far it's really impossible (for me) to pinpoint what the problem is. It's certainly not the oxygen sensor, which is cycling perfectly. Thanks for all the videos.

@DFWAuto_Hack

2 жыл бұрын

Does this truck have an obd port? I have just bought an 1989 f150 lariat xlt. Thanks

@OvertheHills

2 жыл бұрын

@@DFWAuto_Hack The problem with my B2 ended up being the distributor Hall effect (crank) sensor (per Scanner Danner). 1988 (and 1989) have OBDI ports but they're pretty useless in comparison with OBDII. The breakout box allows easy access to the computer's inputs and outputs, but you need a voltmeter (and preferably an oscilloscope) to see what's going on. Fortunately, they're a lot simpler than OBDII vehicles so they're really not that difficult to diagnose.

@DFWAuto_Hack

2 жыл бұрын

@@OvertheHills i have a voltmeter nd can use it. I have an oscilloscope but cannot use it lol Mine shakes and stalls at first. If I give it light gas pedal to keep it running, it gets warm nd is good for the whole day. Makes me think about old motorcycles with choke system lol Transmission wise, it slips from 3rd-4th gear when in D mode; i must switch the gear lever to the mode located at the bottom to keep the power going

@DFWAuto_Hack

2 жыл бұрын

@@OvertheHills i did not see a port in mine but noticed 2 engine lights on at the bottom of the dash

@OvertheHills

2 жыл бұрын

@@DFWAuto_Hack An oscilloscope is just a fancy voltmeter that creates a graph of voltage against time. That could be a bad temperature sensor. I'd check the resistance across its terminals to see whether it's within spec. I don't know about the F150 but the OBDI port on my B2 is in the engine compartment on the right side fender near the firewall. Lucky for me I have a manual transmission. Good luck!

You deserve your own shop,'well done!

Sorry for not putting my comments togather. I didn't want to watch this video because I don't touch anything older than 96 but i'm glad i did. I didn't know Ford was using that egr solenoid back then. You look like u was enjoying driving a stick.

I was just going over some of your past videos as I am getting ready for the ASE L1 exam, and after watching this video I have to say that maybe some Manual Transmission Driving Lessons are in favor for you sir. haha. Hope you get a good laugh as I did. Great video.

I would have diagnosed a faulty stinky tree hanging on the coat rack inside the cab. lol Great job getting the antique to run well. Paul your videos rock!

WE DO APPRECIATE WHAT YOU DO FOR THIS INDUSTRY GOOD JOB

Great video! Thanks for the extra mile as normal. I like doing an old job now and then, it's funny how stuff comes back!

I wish I would of seen this a couple weeks ago with my sons truck. Those Ford F150 really screwy with 2 timing scales and 2 timing marks. - Thanks for the video

@ScannerDanner

Жыл бұрын

thanks for watching!

I cant remember the last time I used a timing light, maybe 15 years ago?

Another great video, thank Mr. Danner. Hopefully it stay's away this time but, I am sure part 3 would be great too. Thank you again

Awesome video. I have a '91 Mustang GT and have the same diagnostic capabilities as this truck. I like that you think out load. It helps me learn from your experience. I know you've done it before and have stated it won't cause any issues, but I'm still in awe that you applied 12v to the O2 sensor input circuit. To be honest, that is my biggest fear in circuit validation, applying either too much current or too much voltage to a circuit. I know that you have gone over this so many times. I guess I just need to believe. And thanks for always going the extra mile; you know by showing the new O2 sensor output.

@ScannerDannerPremium

9 жыл бұрын

I think it is a healthy fear and I cannot make you feel any better about it other than what I've shown in the past. Did you see my other video where I attempted to measure the current flow from this test?

@michaelmillion183

9 жыл бұрын

ScannerDanner Premium I have. It was very easy video to understand and follow. Because of this video, I have also measured all my test lights and have marked them with their amperage ratings. Yup, all. I have a whole bunch of test lights since I couldn't find one at 200-300ma. I have both computer safe and normal test lights. LOL But like from what I have seen from you, I have yet to use a computer safe one. I see what you are saying in that you used a test light when bringing the O2 circuit high so amperage would be limited to 200ma to 500ma. But, voltage was much higher than the AtoD convertor usually gets; I'm under the impression this circuit usually handles no more than 1.5v. But, in your test, you applied a full 12v. Like you said, they design the circuit to handle the heater circuit shorting to the signal circuit. I totally understand how and why you did what you did in this video. But, I'm curious how you would handle a similar issue with an A/F sensor, instead of an O2 sensor. From your videos and videos that you recommended, you would rely on scanner PIDs, but just for fun, let's assume you cannot access scanner PIDs. In other words, ScannerDanner would just be Danner. LOL Again, thank you for your replies and all the knowledge and experience you share with such enthusiasm. It is your passion and desire to do the job right that makes me, and probably everyone else, watch all your videos over and over.

@ScannerDanner

9 жыл бұрын

Watch this video starting at 23:43

@ScannerDanner

9 жыл бұрын

Help if I posted the link :) m.kzread.info/dash/bejne/go16s5WSZMish7w.html

@michaelmillion183

9 жыл бұрын

I remember in one of your training videos on PCM voltage sensing, you clearly state that a voltage sensing circuit of the PCM does not induce current. So, the numerous videos you have provided have clearly demonstrated this fact. This circuit is just sensing voltage potential difference. You have shown me beyond a doubt that sending 12v to an O2 voltage sensing circuit will not induce current flow, and that the PCM A2D will just take anything >1v as 1v, which makes sense. Thank you; thank you.

i love old ford trucks theyre my favorite.....

I really appreciated what you did, you are a super teacher :)

Fuel tank selector valve has a filter in bottom of many.Few are aware of this. I just changed one 30 years never done. There is an Arcing spark wire 30:05 I can see/ hear it next to tps for misfire. Will test O2 next. Good job Thanks

@ScannerDanner

4 жыл бұрын

no there is not, that would be the purge solenoid you were hearing that was clicking on/off

Wow, called it! Nobody understands the o2 sensor is more likely due for replacement than plugs and wires. Most folks don't know the importance of what the o2 does I guess.

Thank you for the video you really went the extra mile.This brings back a lot of memories

I was thinking verifying base timing too. It was tricky to get the distributor gear and the oil pump key lined up when i put mine back in so i got it as close as i could then adjusted the base timing after i started the engine.

Great video. Rode with you all the way thru. Who cares about the seat belt. With trying to figure out what was going on, I'd too would have forgotten to buckle up. Good troubleshooting. Thumbs up!

@ScannerDanner

8 жыл бұрын

+Keven G thanks man

Hi Dan, finally, a mechanic with the same principle as myself. I will not replace any part until I am 100% sure its bad and usually use a known good used part to verify my diagnosis then I'll replace with a new one. Any one can solve tge problem if they replace enough parts eventually the problem part will get replaced, at the customers expense. Anyway i stopped this video at 9 min. To insert here what I would do at this point in diagnosing this particular step, because fords balancers have a tendency to rotate on the rubber. Pull #1 spark plug rotate the crankshaft with breaker bar, not bump the starter, till you feel compresion, the put the dip stick in the spark plug hole continue to rotate the crank until the dipstick starts to go back down in the cylinder. At the point where the dipstick doesn't rise any more. That is TDC mark the balancer at 0°. The rotor should be in the general vicinity of #1 tower of the cap. If the mark you made doesn't match the factory mark, the balancer has moved. Use your mark to set the timing.

@lindale1958

2 жыл бұрын

i have a question, Have you ever came across a vehicle that when cranking it over the engine seems to have no compression? It's like all of the sparkplugs are removed. Then 5 mins later it starts normal. This has happened to me twice. Once on a ford courier, every morning cranks like 0 compression then sometimes within 5 mins it starts other times up to an hour before it starts. the second time this has happened was yesterday on my 1990 f150 4.9 4x4. I was driving home two nights ago the engine just stalled like I turned the key off. first thing i checked for spark. Had none, removed the spout, engine started. I drove it home. Yesterday I put the spout back in, tried to start it, but it acted like 0 compression. I went in the house refiled my coffee cup. went back outside cranked the engine and it started up normal. I have seen some strange things in my 50 plus years as a mechanic but these two vehicles are mind blowing.

Excellent. I really appreciate how you explained your thought process through everything as you went.

Paul I have a 95 300 with a stick same exact symptom. The only way I was able to stop it was to insert a straw from a spray can to delay the vacuum and that fixed the problem. ford's fix for this was a one way valve with a delay to solve the problem. I cleaned the egr circuit changed the egr solenoid with no difference. but the restriction in the vacuum line eliminated it. I also replaced the 02 sensor. made no difference. hope this helps.

I wish I could go to school where you teach. I'm in community college for automotive and you really know what's going on.

@ScannerDannerPremium

9 жыл бұрын

You can join me online on my premium channel if your interested. It's free for 14 days, check it out, you will not be disappointed. Just click on this name.

Hey again Scanner Danner, it took me enough time leaving you an SOS PLEASE HELP ME, TO HELP MYSELF that I am currently catching your part 2 to the same truck . I'd be very happy to pay you for your time as I know you are a very busy brilliant boy / man . JimmyKent in Goodlettsville Tennessee from video 1 of 2

@ScannerDanner

16 күн бұрын

Help you what? If we've been communicating, it helps me if you reply to my last message to you. I see them all, regardless of where you post. Starting a new one is starting over for me, which makes me not want to engage.

Apreciate all u do...for real=).. think the hardest thing to do was getting underneath the truck when its cold and wet...thanx for all ur hard work.....

Great video Thanks for all sacrifice you made As soon as you mentioned your book I ran to look at it and now it makes more sense when it's applied in real life.

@ScannerDannerPremium

9 жыл бұрын

Which part Juan? The O2 signal circuit test?

@JuanOrtiz-mo8be

9 жыл бұрын

Section 10 signal circuit integrity test

@ScannerDannerPremium

9 жыл бұрын

Ah the opposite code test! No doubt, great example of when to use it huh?

Nice Video Mr. Danner. When you leaned over to adjust distributor I said to myself "watch them string's buddy". Good tip! Paul Please put your scan tool on the seat and NOT the steering wheel. I'm sure all of us don't want to see you get hurt from possible SRS deployment and most importantly Your Kids need there Daddy:) -I'm not sure if the vehicle is equipped with air bag but a good practice would be to never put it there. Look forward to your next video and Paul thanks for doing what you do.

These old trucks are different. Each has its own little quarks and personality. I'm on my 3rd one and I just love these trucks. The bricknose (87-91) and OBS (92-96). The vacuum system is over complicated and prone to leaks..

Hey Paul, great video. I got an 86 GT 5.0, I got the idle running perfectly. Locked on at approximately 650-675 RPM. However, once in while idling engine warmed up and in close loop, the engine will drop in RPM about 50 RPM and back to normal in a hunting fashion. While its hunting the Vacuum gauge also drops from a steady 18 inches of mercury to about 14 or 15 inches of mercury. At the same time this is happening, I'm monitoring the ECT, IAT, MAP, EGR, PIP/SPT, TPS,IAC (sawtooth waveform) and all parameters were within specs. Finally I performed a amperage check on the IAC while the RPM hunting was occurring, I noticed an increase in the amount of IAC current draw during this RPM hunting. I'm thinking the IAC step motor may be acting up, since normal position of the IAC is closed via spring and maybe the IAC is struggling to keep itself open do to age,etc. The IAC plunger is spotless I cleaned it and the throttle body plate as well is spotless. My next step is too replace the IAC valve, it's the original I'm the original owner but I have always kept it spotless. This Mustang does mods I performed but always ran AWESOME after mods until this recent Idling issue, what do you think about me replacing the IAC, keep up the great work. Oh forgot to state the fuel is rock steady 39 psi and under acceleration increases to 42-43, with no problem. Thanks Paul

Thanks for showing the waveform of the O2 sensor. Now i am sure that my O2 sensor it's fine.

i have the same truck at home except it has a v8 instead. i have learned a lot of patience with this truck. the throttle body was plugged solid and all the bolts on the engine were just finger-tight. that would explain the 3000 rpm right out of the gate, blown head gaskets and burned valves. i almost got i fixed now. but it is winter and 40 miles away outside.

nice video paul, also a positive way to take care of the comebacks,good attitude , nice my friend

I have a 95 F150 4.9 with 4R70W automatic. I've been chasing a bad surge for a few months, it violently "break dances" at highway speeds. I've done all the usual tune-up stuff, including vacuum lines. Truck now has 190k. Checked and blocked off EGR valve and even did a "poor man's" cylinder leakage test (shooting compressed air into spark plug holes with radiator cap off) - I'm to the point where I either got a bad new part out of the box, or I have a wiring problem.

@kellismith4329

Жыл бұрын

I had a wierd issue like that with mine , though it’s a 5spd manual - I kinda took a guess at the wierd box shaped thing on the firewall with a vacuum tube to it called the map sensor, that was it I got lucky it ran like a champ

Is it bad that I am legitimately excited to watch this video?

Funny you say you hate to run new wires... I just had a voltage drop on the supply side of the evap vent solenoid, but the problem area in the wire happened to be between the fuel tank and the frame rail. I didn't want to drop the tank, so I ran a few feet of new wire for the time being. Fortunately, it was my truck and it's a GMC Sonoma so I'm sure the fuel pump will fail soon enough. Then I will find the bad section of wire, repair it and remove the new wire I just put in!

I appreciate it. It was not easy getting under neigh the track at all, specially on wet and frozen gravel.

Great video as always. Glad you enjoyed rolling around in the ice and gravel