I am just starting to restore my Super dream . Great stream mate . My bike only has 10,000 miles on it and runs like a dream so no engine work required just frame and brakes etc. Keep them comeing . 👍👍
@NatsNackersYard
28 күн бұрын
will do mate
@luddite6239Ай бұрын
Nicely done! I must get one if those scissor lifts. Be careful with the starter motor. Ideally you want to try to hold the threaded post while undoing the nut. Sometimes there's a shallow hex at the base, which you can get a thin or ground down spanner on, or you could cut a slot in the end of the post to take a flat screwdriver and use and open ended or ring spanner on the nut. If you don't immobilise the post, then the corroded nut will just spin the post and tear out the attached electrical connections inside the motor body. Good luck!
@NatsNackersYard
28 күн бұрын
Thanks mate. good int!
@motorcyclerescuerАй бұрын
That was a great job Nat.
@NatsNackersYard
28 күн бұрын
well, it worked!
@kawasakiaddiction6296Ай бұрын
Did my test on a 250n. Good bikes. After the test I bought a brand new Honda VF400, which to this day, is the one I most regret selling.
@NatsNackersYard
28 күн бұрын
Its an odd little thing
@RyansGarageUKАй бұрын
I think your method of engine removal was much more controlled then my bungee strap method. 😃
@NatsNackersYard
28 күн бұрын
Still not quite right though!
@mikeyp1977Ай бұрын
Don’t see how that was”badly” done. Nothing broke. Nothing dropped. You took your time and got the job done. 👍🏻
@NatsNackersYard
28 күн бұрын
It was a bit scruffier than I had hoped...
@derekdingwallАй бұрын
The oil looks like the state of things to come Nat👍
@NatsNackersYard
28 күн бұрын
Nasty, nasty.
@callandy100Ай бұрын
Good progress sir!
@NatsNackersYard
28 күн бұрын
cheers dude
@stephenwalsh8184Ай бұрын
🏍👍👍👍
@NatsNackersYard
28 күн бұрын
Thanks for watching mate
@karlvanboxel561Ай бұрын
Have u still got Blue?
@NatsNackersYard
28 күн бұрын
No mate. Sold him on
@sidwainhouseАй бұрын
I'll be honest mate, that oil is not looking too good for the engine internals. Easier than an XJ engine to drop and you've still got all your fingers so a win there.
@NatsNackersYard
28 күн бұрын
Chicken dinner!
@wibblywobblyidiotvisionАй бұрын
Cracking on, cracking on. Surely I can't be the only one who was shouting "lift the goddamn bike off the engine you tit", though. Once the engine's out, swingarm pivot back in (makes it easier to move, and you don't lose the pivot), what's left weighs (relatively) bugger all. Lift the front end, pivot around the rear wheel, and chuck it in the skip ^H^H^H get it out of the way.
@NatsNackersYard
28 күн бұрын
thats a new one on me! I am just trying to follow the book
Пікірлер: 25
I am just starting to restore my Super dream . Great stream mate . My bike only has 10,000 miles on it and runs like a dream so no engine work required just frame and brakes etc. Keep them comeing . 👍👍
@NatsNackersYard
28 күн бұрын
will do mate
Nicely done! I must get one if those scissor lifts. Be careful with the starter motor. Ideally you want to try to hold the threaded post while undoing the nut. Sometimes there's a shallow hex at the base, which you can get a thin or ground down spanner on, or you could cut a slot in the end of the post to take a flat screwdriver and use and open ended or ring spanner on the nut. If you don't immobilise the post, then the corroded nut will just spin the post and tear out the attached electrical connections inside the motor body. Good luck!
@NatsNackersYard
28 күн бұрын
Thanks mate. good int!
That was a great job Nat.
@NatsNackersYard
28 күн бұрын
well, it worked!
Did my test on a 250n. Good bikes. After the test I bought a brand new Honda VF400, which to this day, is the one I most regret selling.
@NatsNackersYard
28 күн бұрын
Its an odd little thing
I think your method of engine removal was much more controlled then my bungee strap method. 😃
@NatsNackersYard
28 күн бұрын
Still not quite right though!
Don’t see how that was”badly” done. Nothing broke. Nothing dropped. You took your time and got the job done. 👍🏻
@NatsNackersYard
28 күн бұрын
It was a bit scruffier than I had hoped...
The oil looks like the state of things to come Nat👍
@NatsNackersYard
28 күн бұрын
Nasty, nasty.
Good progress sir!
@NatsNackersYard
28 күн бұрын
cheers dude
🏍👍👍👍
@NatsNackersYard
28 күн бұрын
Thanks for watching mate
Have u still got Blue?
@NatsNackersYard
28 күн бұрын
No mate. Sold him on
I'll be honest mate, that oil is not looking too good for the engine internals. Easier than an XJ engine to drop and you've still got all your fingers so a win there.
@NatsNackersYard
28 күн бұрын
Chicken dinner!
Cracking on, cracking on. Surely I can't be the only one who was shouting "lift the goddamn bike off the engine you tit", though. Once the engine's out, swingarm pivot back in (makes it easier to move, and you don't lose the pivot), what's left weighs (relatively) bugger all. Lift the front end, pivot around the rear wheel, and chuck it in the skip ^H^H^H get it out of the way.
@NatsNackersYard
28 күн бұрын
thats a new one on me! I am just trying to follow the book