This is one of the worst rust conditions on a 64 I have ever seen. This one makes mine look like a gem....Great work

@guzzifabrication3448

Жыл бұрын

Thanks for watching !

Great work boss! Actual work being filmed and an explanation on what’s being done, can’t get better then that. Definately helps the impala fans.

@guzzifabrication3448

Жыл бұрын

Thank you !

Putting in that work nice

@guzzifabrication3448

Жыл бұрын

Have to take care of my customer, thanks for watching !

👍🏾👍🏾👍🏾👍🏾👍🏾

@guzzifabrication3448

3 ай бұрын

Thanks !!

This guy knows his stuff. Grate work grate skills.

@guzzifabrication3448

Жыл бұрын

That's awesome ! Thanks !

Wow !!! you cut that car up ! I can't wait to see it go back together.

@guzzifabrication3448

Жыл бұрын

Yes Sir !

@angelsanchez2845

Жыл бұрын

@@guzzifabrication3448 i want to do the same thing to my car

@guzzifabrication3448

Жыл бұрын

@@angelsanchez2845 Nice...

🔥 as always.

@guzzifabrication3448

Жыл бұрын

Thank you for supporting the channel !@

I'll be doing the drivers side quarter panel and wheelhouse on my 63 Biscayne this summer. I'll be watching your videos a lot. Thanks!

@guzzifabrication3448

Жыл бұрын

I am replacing the inner/outer wheel house as we speak.

Great work

@guzzifabrication3448

Жыл бұрын

This Impala is actually pretty nice to start with even with the damage and rust.

@derrickwebb7230

Жыл бұрын

@@guzzifabrication3448 and you make it look so easy

Great Video Robert. Keep them coming

@guzzifabrication3448

Жыл бұрын

Thank you Sir !

Keep up the good bro like always always enjoy watching your videos

@guzzifabrication3448

Жыл бұрын

Thanks For supporting the channel !!!

Maybe it's just me... but what I have seen so far on your channel.....the amount of detail your methods, choice of tools used.....the overall work done( your work) should be what all others in your industry should be compared to your.... work is the finest!

@guzzifabrication3448

Жыл бұрын

Wow !!! Thank you ! I strive to be the best craftsman I can be for my customers. Thanks for watching !

@FrisellFan01

Жыл бұрын

@@guzzifabrication3448 Your one of a kind ... there may be many that do what you do but what I find is the level of thought of careful planning & choices made that makes you very different than others out there.

@guzzifabrication3448

Жыл бұрын

@@FrisellFan01 that's a very generous comment I'll do my best to live up to it thank you

@reality-winner5759

4 ай бұрын

​@@guzzifabrication3448this commenter is spot on. Watching your work vs other channels makes other shops look like sloppy rookies. Exceptional craftsmanship man

@guzzifabrication3448

4 ай бұрын

@@reality-winner5759 That means alot ! I appreciate your support of my channel !

This is one of the cleanest shops I’ve ever seen.👌

@guzzifabrication3448

Жыл бұрын

That's awesome, Thank you, to me the shop condition is a reflection of what to expect from a shop.....

Watched your resistance welder video.. I have the same harbor freight 220V.. Something I did was purchase a set of 12 inch tongs that are compatable with the harbor freight spot welder.. They give you much better reach and options.. I purchased mine on Ebay for 79 bucks..

@guzzifabrication3448

Жыл бұрын

I did the same, HUGH improvement ! I'll have a video out on that upgrade shortly. Thanks for watching.

4:14 These videos are great. The best instruction out there. My 72 Plymouth had the wrong (side marker light) quarters sectioned on some years ago. The work is crap. Not knowing how the brand x replacement quarters are, I'm hesitant to take them off completely. Glad to hear you mention the fit of new panels.

@guzzifabrication3448

Жыл бұрын

Yeah I've already noticed some issues with the new Quarter.....

@DA-cg3du

Жыл бұрын

@@guzzifabrication3448 Can you please do metal work in my 64 , I’ll ship my car to you

@guzzifabrication3448

Жыл бұрын

Get my email out of the description send me what you have and we will get you on the schedule

😀👍

@guzzifabrication3448

Жыл бұрын

Thank you !!!

You are too kind in regards to your comments about the quality of reproduction panels. Nice update!

@guzzifabrication3448

Жыл бұрын

I know right.... thanks for watching !

Are you gonna repair or replace the inner rear wheel house? I messed up by not keeping the trunk weather strip channels on. I had to measure/fit/adjust the crap out of my quarters/rear taillight bezel/trunk panel to make sure the trunk closed correctly. Nice job man

@guzzifabrication3448

Жыл бұрын

Probably repair them, but not definite. I'm glad you got it all worked out... it doesn't take much for things to go south....

Have you ever thought about just building an entire car like this from new body parts? Is that possible on any year model Impalas, based on part availability?

@guzzifabrication3448

4 ай бұрын

I know almost all panels are available for cudas, camaros, chargers, tri fives, yes a guy could build a complete vehicle from a catalog and apply for a V.I.N ( that would be the difficult part... )

@reality-winner5759

4 ай бұрын

@@guzzifabrication3448 thanks for the insight!

@guzzifabrication3448

4 ай бұрын

@@reality-winner5759 👍kzread.infogaming/emoji/7ff574f2/emoji_u1f44d.png

What was the reason you chose a plasma cutter on the 64 vs a wheel cutter on the 62? New tool? better tool? Specific need for a 64?

@guzzifabrication3448

4 ай бұрын

Great question, if there is any body filler in the area you are rough cutting, you don't want to use a plasma cutter a cutoff wheel is much better.

You certainly are talented if you can do that much cutting and then get it all back together straight. Whose quarter panel replacement parts are you going to use? I bought AMD. Were they good, yes. Were they great, no. I had trouble lining up my fuel filler area. Also, the body line where the door meets the quarter in the middle of the door was wider on the AMD than the original door. I wish I knew 1% of what you know. Can't wait to see how this project turns out. Keep the videos coming.

@guzzifabrication3448

Жыл бұрын

I have an upcoming video on that subject....

15:54 hello.did you decided on the inner fender well? patch it up or replaced it? Have a good day 👋

@guzzifabrication3448

Жыл бұрын

Just replaced today.

Did you get a good mark or dynacorn trunk floor? I got a good mark brand and the dang mounting bolts at the body mounts aren’t the same size. They are significantly smaller.

@guzzifabrication3448

Жыл бұрын

Goodmark, we'll see how it fits

@ChristopherL0rtiz

Жыл бұрын

@@guzzifabrication3448 seemed to fit well. Only thing I noticed was the frame mount bolts on that brace are small. Smaller then factory. The original and new bolts are too big. I’m curious if it was just mine or if all of those trunk pans are like. Aftermarket stuff man they skimped whenever they had a chance 🤦‍♂️ but wanna charge these crazy prices.

Hey Sir, How long is your waiting list?

@guzzifabrication3448

Жыл бұрын

About 12 months

Sorry to bother you I just have a quick question I see and all your videos you use weld through primer would you be able to let me know what brand you use and thank you very much

@guzzifabrication3448

Жыл бұрын

No bother brother, SEM zinc weld or U-pol weld through primer are the most common weld through primers, the most important thing is that the primer contain zinc.

How much does something like this cost?

We're are you located brother

@guzzifabrication3448

Жыл бұрын

Rowlett Tx, 30 min outside of Dallas

@angelsanchez2845

Жыл бұрын

@@guzzifabrication3448 brother do you know anybody in los angeles that you can recommend that does work, how you do ,im trying to do the same thing to my impala get rid of all the rust

@guzzifabrication3448

Жыл бұрын

@@angelsanchez2845 Sorry I don't.... I do get cars from California

@angelsanchez2845

Жыл бұрын

@@guzzifabrication3448 how much do you think they would charge to my car from los angeles to you

@guzzifabrication3448

Жыл бұрын

@@angelsanchez2845 Google auto transport or carrier to Rlwlett Tx and you will get a quote.