Thank you for watching. Don't forget to ''Subscribe'' kzread.info/dash/bejne/oJmu2duTmpu6qsY.html

@KILAKAS1

4 жыл бұрын

u did not answer my question

@meinemechaniker

4 жыл бұрын

I answered now 👍

@RAMB0DJOHN

4 жыл бұрын

hope someone will restore that vise after you destroy it

@meinemechaniker

4 жыл бұрын

👍

@richardwhite1975

4 жыл бұрын

Outstanding work. Very nice craftsmanship.

Like an old aged King asked the guy to restore his childhood vise.. and the guy restored it with honor and respect.. 🙏

@scootertrash3807

7 ай бұрын

I’d have left the marks around the jaws, yes I’d have fixed the chip at the jaw, and the anvil area and left the rest, when the old aged king asked me about them, I’d have said “ to remind you as you gaze at it, that you had a wonderful childhood”

probably one of the best restorations on KZread

@meinemechaniker

2 жыл бұрын

🙏🏻🍻

This might be the best tool restoration video I’ve ever seen. And I’ve seen a lot. Wonderful job.

This is possibly the most impressive restorations I've ever seen. That thing was absolutely brutalized and it looks better than it ever did new. A work of art

It is beyond a restoration. It is improved from the original factory condition. But now it is too nice to use.

@meinemechaniker

4 жыл бұрын

Thanks 👍

@jimwiskus8862

3 жыл бұрын

This is museum quality work.

@asw19B100

2 жыл бұрын

Imagine what the already expensive Wilton vise would cost if taken to this level of refinement at the factory! Wilton->welldone->(unmöglich) wohlgetan.

@nicholaslacovara2381

2 жыл бұрын

@@nettils5555 Restoration of this kind is in the category of a work of art more than just a tool. Having nice tools is appealing to some people.

@stripersniper1531

Жыл бұрын

Excellent restore.The way it should be done…I would say ..upgraded !! Cool looking vice

Oh man it's been a long time since I saw a vintage Wilton. That was built back when everything had soft swoopy lines and lots of curves. Back when everything looked like an airplane lol. It's a beautiful vise, and you did a great job restoring it.

Stunning work. I recently returned home with my fathers collection of rusty anvils, vices, tongs etc. You’ve inspired me to clean them up.

One of the most satisfying restoration videos I've had the pleasure to watch. Beautifully done!

It's actually ridiculous how beautiful it looks

That old Wilton had seen some rough times but you took it back to better than factory new. Great work!!

@meinemechaniker

Жыл бұрын

thanks sir

THAT. IS. BEAUTIFUL!!!

Beautifully engineered vise. Meticulous restoration to preserve this piece of history. Thank you for sharing,

The most beautiful vice I've seen. This tool looks usually very utilitarian but this manufacturer invested in good design as well, which is rare.

This has been my favorite vise project I have seen on KZread. It is gorgeous and I love the process you did to restore it. I've watched people sand blast, use electrolysis, all sorts of things. You were successful using chemicals and hand tools. Just phenomenal!

@meinemechaniker

Жыл бұрын

thank you so much

This is *madness* . I'm thrilled.

Have not seen a vise restoration as good as this and is now 2022. SUPREME WORK SICK MASTER MECHANIKER !!!

@meinemechaniker

Жыл бұрын

Thanks sir

My father had a Wilton in his workshop, its rests now in my own shop. I wish it looked this good! A beautiful restoration. Well done Sir

This is no longer a tool but a work of art

@meinemechaniker

4 жыл бұрын

thank you 👍

Better than new! Fantastic!!!

What a gorgeous transformation

I know this was from two years ago, but wow! What a beautiful restoration! My Grandfather had one just like that in his workshop on his farm in Mississippi. Fantastic work!

@meinemechaniker

Жыл бұрын

Thanks sir

Better than it was brand new..!! This thing is incredible. Seriously never seen a restoration better than this in my life. Just absolute perfection!

@meinemechaniker

3 жыл бұрын

Thanks Ricky 👍

Magnificent restoration...far better than new with all the casting ridges removed.

Holy shit! Watched the whole thing! Amazing work!!!!

I want to display that on my coffee table. Masterful work.

''ABSOLUTELY AWESOME'' That's the most beautiful 70 year old antique I ever seen !!!! I tip my hat to you ''Sir''.....

@meinemechaniker

4 жыл бұрын

thanks :)

@billadams3861

4 жыл бұрын

Then you haven’t seen me !!!

@meinemechaniker

4 жыл бұрын

👍

The polish pops with that black paint same with the USA dunlop u da vice man love all your vice restos excellent

Extreme Detailing. That's Great ! 👍

There is a lot of art on this. Thats why there is room for everyone on yt for restaurations. I can never get enough! Great content !

@meinemechaniker

4 жыл бұрын

thanks

Now that’s what you call a restoration,nothing left untouched. Fantastic.

@meinemechaniker

4 жыл бұрын

Thank you 👍

Attention to details and the will for perfection makes the whole story 💪🤩🤩🤩

@meinemechaniker

Жыл бұрын

👌👍

Giving 'My Mechanics' a run for his money. Excellent work.

And the final restoration is beyond words... Just utterly gorgeous! You sir are an artist! 👩‍🎨

100% Better than Original !👌👌👌

*inserts “Dayum” gif - That’s an amazing restoration.

Incredibly well done. Quality vice very much improved from the factory. True show piece! Detailed craftsmanship!

You sir, are a true Artist. Absolute beauty in your work. I use Wilton Vises everyday and never in my life did I picture it as a true work of art. You ROCK...

@meinemechaniker

3 жыл бұрын

Wow, thank you!

This vice probably looks better now than it did when it was new. Splendid restoration.

@meinemechaniker

3 жыл бұрын

Thanks 👍

good job dude . professional . Patience . enjoyable . May the God give you the strength 🌹🌹🌹🌹🌹🌹🌹🌹

That was superbly done! Too beautiful,to actually use!

@meinemechaniker

6 ай бұрын

Thaks

Wow! Just an excellent restoration. Learned a lot watching your techniques. Thanks!

It's one of the best restorations I've seen, if not the best. The vise came out looking better than it did when it left the factory!

@meinemechaniker

2 жыл бұрын

Thank you

Hard to believe that is the same vise as you started out with. You done an amazing job on it. It is better than new after all you done.

Wow, much MUCH better than new, great work

Awsome find and work! I did a quick search and the company still exists and makes these vises after 70+ years.

As usual, vintage artwork fit for a King!

I'm in love with your bench grinder.

Thank you for posting. My neighbor gave me the same model vise. I wouldn't have known how to disassemble to clean or where to lube without your video.

@meinemechaniker

2 ай бұрын

I'm so glad you benefited from this video. greetings.

Amazing workmanship. Museum quality attention to detail. You are as much an artist as a machinist.

Gorgeous restoration in the same vein as My Mechanics, thorough and skilled workmanship. Would love to have a vice like that!

@meinemechaniker

4 жыл бұрын

thank you so much 👍

@GuyMcPherson69

2 жыл бұрын

Funny because their names are slightly similar...

@myerloeb4948

2 жыл бұрын

@@GuyMcPherson69 ones in english and ones in german, and they both speak german

@santiagodunbar2381

2 жыл бұрын

You can get a Wilton for around 3-7 hundred used, and new bullet vises range drastically

This man is the Yehudi Menuhin of restoration of stuff, and how to do a YT video. My idea of an engineering masterpiece is to change the four spark plugs on my old 1990 TP Magna wagon. But, without much fear of contradiction, this is the best video I've ever seen on YT. Hands down! No 'music' or yakety yak. Dear God...thank you!!! Visually, wonderfully informative. It was also an excellent instruction lesson. Fully excellent production. It was as though I was standing next to MM while he was doing the job. The blokes in the factory that made this vice would be looking down from heaven with tears in their eyes. Thank you!

Gorgeous, it’s art.

You done a fantastic job restoring the wilton vice. Absolutely stunning

@meinemechaniker

3 жыл бұрын

Thank you so much 👍

Congratulations. This is one of the best restorations I have ever seen.

That’s a beauty even before restoration. Best shop vice around right there. WOW finished is better than NEW.

Better than new, definitely!

This was the greatest thing I have ever watched on KZread, thank you for taking the time to make this.

@meinemechaniker

3 жыл бұрын

glad you like it

I’ve commented on this before, but it’s just pure artwork! Imagine the hours that went into this?

@meinemechaniker

Жыл бұрын

🙏🏻

Outstanding job !!!!!

Craftmanship at its best..

I love the way you made the new anvil out of weld! Stunning!

That's the most complete recovery I've ever seen.

@meinemechaniker

4 жыл бұрын

Thank you so much 👍

@My_Op

4 жыл бұрын

If you love "Meine Mechaniker", check out "my mechanics". Obviously, this channel is an hommage to the other one ;) kzread.info/dash/bejne/i4Skz6t9nKW3m6w.html

Beautiful vise and beautiful job.

what can I say, its master piece!!

This was an amazing restoration! I really appreciate you removing the sharp edges and casting seams, and polishing the bare metal parts! Brilliant!

@meinemechaniker

4 жыл бұрын

Thank you so much

I love those old Wilton Bullets. You did a great job restoring it. Thanks !

@meinemechaniker

4 жыл бұрын

Thanks 👍

Excellente restoration sir❤️👍💯🙏💪

WHAT A BEAUTIFUL WORK OF ART MY FRIEND!!!

Excellent! Its a great looking vise. I like that you painted it black also. A great color for a classic item.

Having done two Wilton bullet vise restorations, neither as good as yours, my favorite part was first that you were lucky to get a vise with the end-cap in fairly good shape. And then you were particularly meticulous in correcting it's form and sanding it smooth. The impact on the finished restoration sets off well against the re-machined jaws. Very nice indeed!

@meinemechaniker

4 жыл бұрын

thanks for comment

Perfect restoration. Keep it up 👍

Man alive...sure is a thing of beauty!😍 Very well done!👍🏼

👍 You have done a Magnificent Job! Taking Tools to Another Level! AMERICA This is What INDUSTRIAL ARTS is All ABOUT! & MUCH MORE!

A beautiful job. I pays to go the extra mile. Thank you for your work. Really enjoyed watching!

@meinemechaniker

3 жыл бұрын

🙏🏻🌿🔧

OUTSTANDING JOB thanks for sharing

@meinemechaniker

Жыл бұрын

Thanks sir

One word: Outstanding!

@meinemechaniker

Жыл бұрын

Thanks sir

An A+ effort, perfect and thank you for lubing all interior surfaces, one thing I would have put a washer between the swivel hold down bolt on each side and the base, the tightening and loosening over time will wear the paint on the base away. Really can be proud of such a great result!

That was the utmost perfection in a restore. I was really impressed. Keep up that caliber of work.

Résultat époustouflant ! Super 👍

Great job...Better than new!

Nice to find someone else on the same league of my mechanics!

@meinemechaniker

4 жыл бұрын

😊 thank you so much 👍

BEST TABLE VISE RESTORATION EVER FANTASTIC AMAZING INCREDIBLE DETAIL YOU SHOULD BE PROUD OF YOUR WORK BUD AND I'M SURE YOU KEPT THAT TABLE VISE AND I ALSO LIKE THE STYLE OF THE BULLET TABLE VISE AND THE 2 SWIVEL TIGHTENERS....BETTER THEN BRAND NEW.....

@meinemechaniker

3 жыл бұрын

Thanks a lot 👍

It's just beautiful, how you work on these tools and revive them. Thank you for showing us, dear Usta.

a +++++ restoration thank you for sharing .

@meinemechaniker

4 жыл бұрын

thank you so much 👍

Você é incrível. Não te escapa nem um detalhe. Sou sua fã. As peças que você restaura deve ficar mais bonita do que na época que foram fabricadas. Suas ferramentas também são Top. Parabéns. Curto muito seu canal. Sou de Juiz de fora - Minas Gerais- Brasil.

Dude this was an amazingly intricate restoration. Thank you for preserving this small piece of history. It looks badass! 👍🏾💃🏾

@meinemechaniker

4 жыл бұрын

thanks 👍

Excellent Restoration!😊😊

Truly a joy to behold, better than new!

@meinemechaniker

Ай бұрын

I'm glad you liked it, thank you

I have a vise identical to this one. Unrestored and I still use it almost every day. This was a high end vise back in 1949. A vise like this one today would cost $600 USD. Beautiful restoration.

@Mark-hx3nd

2 жыл бұрын

I also have the same vice that is used daily at my business. If you could find one at $600 I would buy it! Wilton still sells them today, its $1750 for a 6” wide Bullet vice.

Killer! One of the best restos ever! Great job, Sir!

Labor of love! Museum piece now!

Nice to"hear" you finally switched to a sharp file.

Perfect job sir. I'm so glad guys like you are still exist in this planet. Please keep up the awesome job you do sir and thanks for sharing it with us.

@meinemechaniker

4 жыл бұрын

thank you so much.

Another awesome job well done!! Love your color choices great video work too.

Agane see besssssssssst video and awesome product, I'm glad that there are still people like that who care about precision and beauty, I thought we were disappearing, I have no words to express my admiration, BRAVO keep up the good work, we are not disappearing, ressssssssspect from old BG.

A masterpierce work. Brand new again!

@meinemechaniker

3 жыл бұрын

Thanks 👍

The tools are always in better condition once you have restored them compared to when they were sold new. Amazing attention to detail. Mark

@meinemechaniker

4 жыл бұрын

thanks

"Shine on your crazy vise..." 😉 Outstanding job... 👍

@meinemechaniker

4 жыл бұрын

Thank you 👍

Very very nice work..This is excellent Restoration...far better then ORIGINAL.....amazing..

@meinemechaniker

3 жыл бұрын

Thank you so much 👍