Rusty Deadlocked Arbor Press Restoration - Restoration Videos
#restoration #restorationvideos #antiquerestoration
Rusty Deadlocked Arbor Press Restoration - Restoration Videos.
I restored rusty deadlock arbor press in the video. "Made in USA" I acquired this rusty deadlocked arbor press from a junkyard nearby ship-breaking facility, I paid around 20 bucks for it. It was the part that i have been looking for a while. I fell in love with it in first sight. I am very glad for getting a chance to restore it. Hopefully you will be glad with my restoration as well. Btw I really wonder what you might be thinking about the new handle, please comment below your opinions. Don't forget subscribe to my channel and like these videos please. Thank you for watching.
Meine Mechaniker.
Пікірлер: 764
Thank you for watching. Don't forget to ''Subscribe'' This is my previous video; 1950's Oil Lamp Restoration - Perfect Restoration [4K] kzread.info/dash/bejne/ZX18j81xh5OpqMo.html
@mertmoon7825
3 жыл бұрын
Are you Turkish or are you living in Turkey
@meinemechaniker
3 жыл бұрын
I am a world citizen 🌎🌍😉
@user-uy7vi4ix1v
3 жыл бұрын
Like👍🏼
@meinemechaniker
3 жыл бұрын
Thanks
@MrSneakyGunz
2 жыл бұрын
@@meinemechaniker Crafty to play to the U.S. Like you do.
I’m convinced that this guy and My Mechanics are the same person
@meinemechaniker
3 жыл бұрын
😅 I take this as a compliment. thank you.
@cesarjoughin4959
3 жыл бұрын
This is the first video of seen of him, but just from this comment he's getting an instant subscribe
@jimmyfleebot
3 жыл бұрын
It it was the same person, it would be a smart move financially. Most of his subscribers would be subscribed to both channels since they're so similar, essentially turning one subscriber into two.
@meinemechaniker
3 жыл бұрын
@@jimmyfleebot I'm not the same person, you can believe that.
@jimmyfleebot
3 жыл бұрын
@@meinemechaniker Your hands do look a little different... but I'm a suspicious man ha ha. Fantastic channel by the way, love your work. Thanks for making this great content for us to watch.
I love how silent the video is. So peaceful and calming!
That is one chunky press! It might have cost only 20 bucks, but with all that work, its beauty is now invaluable. Cheers!
I applaud the "new handle" for this press. If using that longer handle then you really need a different tool tbh. Speaking of needing a different tool ...that bearing in the test needed full diameter support to reach the outer race for pressing. 💡
I swear the most satisfying thing in the world is hearing that bolt pop.
I worked in Grand Haven Michigan and I live in the next town over. It's a great City and Resort town. Great place to visit if you are not from Michigan.
The fact that your shop is so quiet you can hear the bolts breaking loose is a luxury i will never know.
@meinemechaniker
3 жыл бұрын
😅👍
@aoiph
3 жыл бұрын
Thomas there is literally a white noise or some sort of water running the entire video... are you deaf?
@charlesseymour1482
3 жыл бұрын
Gotta get a quiet place. Great content.
Better than new !
If I had THAT one it would go in my show case and my cheap HF would stay on my work bench. Very nice, thanks for sharing.
I live 20 miles from Grand Haven MI where this arbor press was made. Beautiful restoration! I'm sure it looks 10x better now than the day it left the factory.
@ThatDamnFosterKid
2 жыл бұрын
Fellow Michigander here. I was excited to see the Grand Haven Mich mark, too!
@vickyahmad3539
2 жыл бұрын
@@ThatDamnFosterKid ooklo
@kajem575
Жыл бұрын
Home of the singing sand on LAKE MICHIGAN and the now defunct WESTBANK bar where my band 24k played in the mid 80's. We slept on the beach or in our 40' school bus in the state park. Our booking agent's name was Kevin Meyers who is now a professional concert promoter. I remember seeing large DAKE presses on the COAST GUARD docks nearby. Didn't know they were manufactured there. 🙂✌️❤
Sonunda bir türk restorasyon kanalı bulmak çok iyi oldu.
@meinemechaniker
3 жыл бұрын
👍
Great Project But major mistake at the end. If you are pressing a bearing into a hole, just musst press on the outer ring, otherwise you could destroy or damage the bearing.
@caseyjones166
Жыл бұрын
What bearing?
Beatiful 👍
Better than the original
You are the best. Far away from the others.
I've used one of those many times in different factories over the years. You made that piece a thing of beauty.
Your painstaking attention to detail is truly amazing. I literally always enjoy the end results. Thanks!
Cute arbor press
19:10 Meine Mechaniker: 👍 Me: AWESOME JOB 👍👍👍👍
@meinemechaniker
2 жыл бұрын
🤗👍
I am particularly impressed bye your attention to small details. Highlighting the lettering, adding the contrasting paint to the polished faceplate, and adding the flag decal to the faceplate. Exquisite work. Thank you for the time and effort you invest in your projects, and sharing them with us.
Better than new👍
@meinemechaniker
3 жыл бұрын
👍
Great job; I love your attention to detail. You take off the sharp edges, clean even "unimportant" parts/spots, and smooth everything down. I enjoy your work.
@meinemechaniker
3 жыл бұрын
Thank you 👍
Very nice restoration, thanks
Absolutely outstanding, it was like watching magic happen before my very eyes. There must have been a tremendous amount of work that we didn't see.
@meinemechaniker
3 жыл бұрын
thank you, you are right. Sanding scenes you watched for 4 seconds may have lasted 1 day.
Mükemmellik detaylarda gizlidir.....ellerine sağlık....
Great photography !
This is a man who does not like sharp edges, burrs or casting flashing. Well done.)
Great work again!😁⚒️🛠️
Beautiful! Everything to perfection! You always go the extra mile to ensure everything is top quality!
Good restoration.
again a great project, I am watching your work with admiration :) @MyRestorations
@meinemechaniker
3 жыл бұрын
👍
Incredible results! Awesome work.
Fantastic work! It belongs in a museum now.
New handle is much better!
@meinemechaniker
3 жыл бұрын
Thanks
That really turned out fantastic. I cannot believe you were able to get it working again without any major parts. The way it used to work you could have got it done without no parts but the way you went was really worth the time and expense. That is actually something you could keep in your home. I know around holidays people put peanuts out this would make a good nutcracker. I just don't know with how good it looks that I would want to use it in the garage. If anything I would keep it on my workbench in the house. That one I don't get so involved is dirty crazy parts I normally do more electrical work in the house on my bench and gunsmithing. Cannot wait until your next project.
Nice!
Catching up on some older videos, this was IMPRESSIVE! The attention to detail and the care you showed while working on this piece was wonderful! The results were fantastic! Be well, be safe!
@meinemechaniker
Жыл бұрын
Thanks 🙏🏻♥️
Beautiful restoration! Thanks for sharing!
There was more than one arbor press that was restored. Countless number of them were. The only thing that's different is the product's brand name. 💯
thats absolutly incredible.
Beautiful job
The work you do is absolutely amazing
Großartige Arbeit. Die Presse sieht aus wie neu.
@meinemechaniker
Ай бұрын
Danke 🙏🏻
That thing looks pretty enough to date!!
Another beautiful restoration--better than new!! Excellent touch with the flag! Thanks for sharing another enjoyable episode!!
You should get a hobby powder coating set and powder coat some of your projects. It will be way more durable than paint. Just an idea. Great job.
Oh it's so weird seeing Michigan (my home state) tagged in this? Love it though, absolutely beautiful work 😍🖤
Love the care for detail!
You did it again! Perfect restoration.
This guy is the next "My Mechanics", he is really good. I enjoy all his videos
@meinemechaniker
3 жыл бұрын
Thank you ALİ 🤗
Great job
Art 👏
Pain stripper, rust remover than sand blast?... I love the way you debur the castings, really classy.
Очень крутая работа👏🏼👏🏼👏🏼 вы молодец, какое внимание к деталям👍🏼👍🏼👍🏼
I had a thought while watching you paint the raised letters. Maybe you could try covering the letters with Plasticine or Blu Tack and then using a small roller to roll the plasticine until the letters show through. This would perfectly mask the letter edges and when the paint is dry just peel it away to show perfectly painted letters. It's got to be easier and neater than freehand painting. All the best and thanks for the videos.
@meinemechaniker
3 жыл бұрын
thanks for the idea.
@GrommiD
3 жыл бұрын
Had the same idea with a slight difference in details.
His great patience pays off
@meinemechaniker
3 жыл бұрын
Thank you so much 🤗
terrific 👍🏽👏🏼
So focused on small details ! Perfect restoration !
@meinemechaniker
3 жыл бұрын
Thanks
Gorgeous, creative, perfect restoration. This is why I subscribe to this channel. I truly anticipate each and every video that is uploaded. Thank you so much for your efforts.
Un autre œuvre d’art! Très beau travail.
Everyone's favorite: The Dake!!!
Nice. A very common and useful mod for these is to mill or grind the bottom two teeth off of the ram to allow it to ratchet in the full up position. This allows you to position the handle better for leverage.
True work of art, well done.
That is a thing of beauty.
PERFEKT...
I like the new handle much better than the original.
Great work. Thanks for posting. The new handle is perfect.
Bu son boya katı mükemmel! Cam gibi! Teşekkür ederim.
Clean & Nice Work.. 👍..😍.! Rotay Gear Part's Need More Grease... For Long Life Tool..!
Extraordinary work! You are a perfectionist!
Wonderful restoration! Job well done, and the filming and editing is perfect! 😊
Restoration perfection! I always treat my tools as I would treat my best friend, so they will never let you down. How anybody could have let that arbor press get into such a bad state is a mystery to me! Excellent job, my friend!
@meinemechaniker
3 жыл бұрын
thanks, I think that tool has been forgotten
Beautiful!!!
IMPRESSIVE job... WOW .. very well done ..
@meinemechaniker
3 жыл бұрын
Thanks
Great restoration
@meinemechaniker
3 жыл бұрын
👍
Excellent job great marksmanship
This is your best yet.
Excellent!
@meinemechaniker
3 жыл бұрын
thanks a lot
Шикарная реставрация браво 👍
Exelente, muy buen trabajo en proceso... Saludos
Very cool
this is real art , thank you
@meinemechaniker
3 жыл бұрын
🤗
Really lovely restoration. The modification to the handle was genius - it looks great. Awesome work 👍
Nice 👍 job
Beautiful new handle. I would've Knurled it
@tituspullo9210
3 ай бұрын
Knurled and nickel plated.
Wonderful acting ❣️
first class!!!
@meinemechaniker
3 жыл бұрын
thanks
above and beyond the call of duty there man. wowie
@meinemechaniker
3 жыл бұрын
👍
Another great project and restoration. Thank you for sharing your talent and preserving these little pieces of history.
@meinemechaniker
3 жыл бұрын
🤗
I love to watch your videos, mainly because you are so very good at restoration. This was really impressive.
@meinemechaniker
7 ай бұрын
Thanks
Exelent job, like always... thanks...!!
awesome. I have a Dake Y press, practically new, that I got from work. They were going to throw it away.
Thank you. So beautiful!
@meinemechaniker
3 жыл бұрын
your well come also thanks
Restoration Work of Art!
@meinemechaniker
3 жыл бұрын
👍
Εξαιρετικός τεχνίτης!!! Εξαιρετική δουλειά!! ΜΠΡΆΒΟ!! 👌🇬🇷!
@meinemechaniker
2 жыл бұрын
ευχαριστώ φίλε. από πού είσαι στην Ελλάδα;
gorgeous paint job
@meinemechaniker
3 жыл бұрын
🤗
Absolutely stunning. Your craftsmanship is next level. Thanks for the great video. So inspiring!!!
@meinemechaniker
3 жыл бұрын
thank you so much
Pretty decent job! Well done
I love the way you tweek the castings!
@meinemechaniker
3 жыл бұрын
😉👍