1948 Singer 201K - Tight Spot - Showing Fix
Тәжірибелік нұсқаулар және стиль
This 1948 Singer 201K came in for service and it has a problem where it has a tight spot when turning the hand wheel.
Tight spots in sewing machines can be difficult to track down but with a little knowledge, it can be easier to home in on the problem. I explain a procedure to help home in on the tight spot in this video.
Please consider supporting the channel at Patreon - / sewingmachines
Web Site - www.institches.co.nz
Index:
0:00 - Explaining the problem
0:48 - Tracking down the issue
2:15 - The relationship between the needle bar and hook
4:00 - Narrowing down the issue
7:36 - The problem shows itself
8:22 - Removing parts and cleaning
13:15 - Explaining the purpose of the slots in the bobbin holder race
14:00 - Assembling the bobbin holder and retaining ring
17:18 - Installing the bobbin holder positioning plate and feed dogs
19:02 - Testing
19:46 - Conclusion and thanks
Пікірлер: 10
Another wonderful video. This was a great explanation on troubleshooting a 201. Nice, clear information on how to work on the hook assembly.Thanks so much!
Excellent, I learned a lot from this. Lesson #1, keep your machine clean! Thank you.
This is great ! Excellent video. I have been searching for this problem but with a 15-30 I have was totally seized and finally got it moving but I have a tight spot also. Been cleaning and soaking and it is somewhat better, funny thing is putting the wheel backwards it is much easier. At first the handwheel would move outward like it was warped or something but not now and still binding. I will check the revolutions and look below where the raceway is even though I have the case and holder out. Did see a video where the wheel would stick in a place as the shaft was bent from dropping so the man took a hacksaw by the collar to cut some metal out which was binding. Strange how it looking warped at first but not now. Thanks again well done video !
Exactly what I needed. Now I need to figure out how to do this myself
Very informative. Learned a lot. Thanks for sharing
Спасибо все понятно 😊
قمة الروعة مكنة سنجر المأركة الاولي عألميا
I have here a singer 760, but the quadrant/finger gear was broken.. do you have a quadrant gear??? Dont now how to get that..
Surprisingly, there is an R in "heah" (here)...
@InStitches
Жыл бұрын
Oh - sorry if my accent offends you :)