Sick truck. Owner of truck listed this online a while back. Here is the description: Truck is sitting on an 1992 S-10 chassis that's been shortened behind cab 7 1/2 in. Air ride on all 4 corners. All front end parts were replaced when this truck was put together almost 7 years ago. Motor has been bored .60 with all new pistons, rods, and crankshaft. Engine has been balanced. Double roller timing chain with roller tip rockers, and custom ground camshaft. Weiand tunnel ran intake with two 450cfm non-choke carburetors. Still features stock ignition. Rebuilt C6 transmission. Small compressor fills a 3 1/2 gallon tank. Gas tank is modeled after a tractor tank that we had replaced a few months ago. Brand new battery installed about a month ago. 15x7 and 15x10 wheels front and rear respectively. Fenders widened and bed narrowed. This truck has been excellent fun for me and my dad since we built it my senior year almost 7 years ago. It has been an absolute blast to drive, take to shows, and just overall enjoy. It is still quite the attention getter no matter where it goes. It is very much the true definition of a rat rod. It's uncomfortable over long distances, squeaks, rattles, and is devoid of any amenities apart from power steering and brakes. It completely lays flat when the bags are deflated to the point that it creaks. This truck was built to cruise, not race. It has held up very well and I would drive it anywhere as long there was a gas station close by.

I LOVE IT!!! THE PERFECT DAILY DRIVER!!!

I own this truck now and its still a blast to cruise!

INSANE TRUCK BRO ! GREAT VISION !

Finally coming together. Good luck !

@Thefabforums

8 жыл бұрын

+sr633 thanks

I like a Car that has been Slammed over a Chopped roof . the look and function on a Slammed ride is gratifying !!!

@Thefabforums

9 жыл бұрын

RayinPa U.S.A. Thanks for watching

Sick truck 👍

Very cool video. Thumbs up !

@Thefabforums

9 жыл бұрын

thanks for the feedback

who dose not want to hear and see it run,nice job

@Thefabforums

9 жыл бұрын

fritz thecat I may try and get some footage of it running soon.

you been sandbagging this one 😱😂🍻

Basically the same way as I have a great time at the same time

Awesome, i love trucks like this. I'm thinking of doing something like this in the near future but not sure, i have a donor car i want to do a drive train swap into something, but not sure what to. Also have an all original 1948 F5 in the barn that I might fix up.

@Thefabforums

10 жыл бұрын

DJ Inclined Sweet. The Ford F5 would be awesome, I kind of have the itch to build me a ramp truck out of an old truck. That F5 would be just right for that. Post the build on the forum...I would dig it.

cool truck.

Awesome truck,

@Thefabforums

7 жыл бұрын

thanks

Sweet

Rat.Rod.Trucks.📣

down in the weeds, right where this classic steel should be

@Thefabforums

7 жыл бұрын

for sure

Awesome truck, take it for a ride and make a video!

@Thefabforums

9 жыл бұрын

David smoreira This was just a truck that I shot at a local cruise in.

i have a 49 kb1 rat and love all rat rods. the look is artistic if you dnt appreciate the look than your probably 12

@Thefabforums

8 жыл бұрын

+Hailey jastrzab Some people have tunnel vision and are only able to appreciate what is in their wheel house at that very moment. The sad part is that people that are like that will always be followers of what others create and never creators of cool them selves.

so bad ass I have one the same year on a Toyota chassis here in Australia I love the shape of them and the rat look suits this thing to a tee

@Thefabforums

8 жыл бұрын

+daniel nash Sweet...are they pretty rare over there?

@chasinlines4803

8 жыл бұрын

+The Fab Forums they seem to be I have only found 1 other in my search to find parts. but the fact that there arnt many around makes me want it finished and on the road even more just so I can have something not many others have

@splashpit

6 жыл бұрын

Will the RTA make you rego it as an international or Toyota ? Reason I ask is Iv seen a Bedford J1 on an 90s f100 chassis and they made the guy comply with 90s compliance .

Did you chop the bottom an lean it forward I like the look

❤❤❤❤

wow a ford ..in it .. WOW I LOVE THAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@Thefabforums

8 жыл бұрын

+voltron63 lol

I got my hands on a 1949 International KB2 and I really like these wheels I was wondering if you can tell me the bolt pattern needed to fit the international, i'd appreciate it - thank you!

@jackhembree2503

5 жыл бұрын

The international was a 5×4.5 , similar to older fords, mopars and jeeps. In the comments it says it on a S10 frame, many are on S10's and dodge Dakota's. I plan to put an inline 6 oil burner in my newly acquired '49 kb-2. 👍🛠👀

Would have been awesome if the builder had put the 345 diesel from international. My dad has a 71 international scout II and he may do the diesel swap.

@Thefabforums

9 жыл бұрын

PureBMX I agree...It would be an awesome combo

@studysenter5319

5 жыл бұрын

To get the most important part of the year, but I have a 8th, and I am a little bit of a new one, but

Where did this video come from? LOL I thought I had seen or at least up to date on all of your videos, but I missed this cool one! Thumbs up for SURE !

@Thefabforums

9 жыл бұрын

This is an older video of mine. Thanks

Silly looking. But, hey, there are grown men out there still fixated on skulls and bones!

@Thefabforums

6 жыл бұрын

different strokes

Can't find the other video but I got two 88's both LX's but a notch and a hatch.

@Thefabforums

8 жыл бұрын

Awesome...I would love to have another notch

what size tires and rims are you running?

@Thefabforums

8 жыл бұрын

+Levon Tipton Not sure. This is not one that we built, it was one we just shot at a local event.

Metal work hot Roding after the war hmmmm

where did the wheels come from?? online or ??

@Thefabforums

8 жыл бұрын

+Craig Parkinson Not sure Craig...this was just a build we shot at a local cruise in.

how much does it cost to build a ratrod out of a vw and Chevy trucks bed

@Thefabforums

7 жыл бұрын

no idea

dragway 42 is literally in my front yard

@Thefabforums

7 жыл бұрын

where is that

@ryanjohnson191

7 жыл бұрын

The Decal on the truck was from Dragway 42. It's in West Salem Ohio. It's currently under a huge renovation.

@erik_7732

7 жыл бұрын

The Fab Forums hi can you please tell me what rims you running on

@Thefabforums

7 жыл бұрын

gotcha

@Thefabforums

7 жыл бұрын

This isnt one of my ride...but I think they where running a stamped steel Nascar style wheel

It would be so cool without the bags.

@Thefabforums

8 жыл бұрын

Its cool with the bags

@dedelabinouze5110

8 жыл бұрын

The Fab Forums It is but i would rather have coils. But i guess it's not my truck ^^ Good job still, this thing is epic.

@sharisochoa7921

8 жыл бұрын

The Fab Forums

Jam Up.......

@Thefabforums

6 жыл бұрын

+Allen Dodson thanks

Give me rats!!!

@Thefabforums

8 жыл бұрын

+wordreet I have a few vids of rat rods

@wordreet

8 жыл бұрын

+The Fab Forums Coolio!

Golf mine foinf

paint it to preserve the body to save it last longer yeah Rusty School put a clear coat over it at least

Á

some rad rod are just junk how can you drive them. I live in canada we can not drive cars like these . police will pull plates off them.

@Thefabforums

8 жыл бұрын

+Paul Ahmed Dont drive junk