*Join this channel to get access to perks:* kzread.info/dron/WFbPzBb7dCyCWuBA-DBrMA.htmljoin *Mr.Electron Patreon's Page* - www.patreon.com/mrelectron *Hindi Channel* - www.youtube.com/@Mr.ElectronHindi *Alternator Channel* - www.youtube.com/@mrelectron_alternator *Watsapp Channel* - whatsapp.com/channel/0029VaQmmRaFCCoWOf7huh3G

This is a universal series wound motor, It means: 1.- The field wounds are connected in series with the armature. 2.- It can be drive with AC or DC. 3.- It is a variable torque motor, as you load the motor it's RPM reduces but it's torque increases. 4.- When you substitute field coils to permanente magnet field you are changing motor charasteristics: 4.1- Only can use DC 4.2- Are changing from a variable torque motor to a constant torque motor. 4.3- If you use high magnetic strength magnets, you obtain high torque but low RPM. 4.4- Conversely, If you use low magnetic strength magnets, you obtain low torque but higher RPM

@soufelectronicsandengineer7472

3 жыл бұрын

You are right

@jaimeenvadoliya7663

2 жыл бұрын

Awesome knowledge

@hasuo9749

2 жыл бұрын

Very very usefull ty all the data are very important to know what to expect and what to do whit it for your desire apliance

@gato-de-schroringer

2 жыл бұрын

Very good! I Would like to know what is the energy consuption on the input betwen a copper coil stator and magneted one , considering the bouth motor's model is the same and the both of one guive us the same mechanical energy on it's output.

@barquisimetido1

2 жыл бұрын

Derick Monteiro Oliva most of the electric motors I've worked with, show 80%+ efficencies, It means that for a 1hp power at motor's axle, It's electrical power demand Will be 746 watts ÷ 0,80=932 watts. I think you can expect a 5% efficency increase for PM motors. Thus, a 1hp at axle, electrical demand Will be 746 watts ÷ 0,85 = 877 watts.

Super glue : How much you trust me...? This guy : YES.

@JoeNathan42420

3 жыл бұрын

It's hard an strong. What's not to trust? Trust me 😁

Peace be upon you, I am Kurdish, I follow you👍👍👍

Thank you for step by step explanation.....nice video.....

Great working. You are providing new ideas. This project is for knowledge not success generator because the wire Gage of armature winding is upper number ( thin)

Good demonstration and step by step explanation..

@longanghoai9881

3 жыл бұрын

This motor will be without armature response , so that increasing speed!

Creative video, thank you for sharing it :)

The universal motor can use on both AC and DC...you don’t need to modify the motor and directly use 200V DC to drive the motor.

@littleraptor9898

4 жыл бұрын

yes, but you will get WAY less speed with electromagnets than with permanent magnets when you drive it on DC

@nadinedevivier5556

2 жыл бұрын

@@littleraptor9898 true

@whatchadoinbois

2 жыл бұрын

@@littleraptor9898 I was gonna comment that

@gamerplayzknightxsalt8811

Жыл бұрын

@@littleraptor9898 you can increase the voltage up to like 60 - 220 DC

@nejatkaraca

5 ай бұрын

Very true. If you wanted to drive with dc voltage, you could use DC voltage. You would not have disrupted the optimized structure of the engine. You could achieve a constant magnetic field by separating the serial connection of the coils in the satator and driving them with DC. Universal motors are very good motors. Still, nice work. Thanks. Greetings from Turkey.

good job let try it as dc generator & show the out put

Super 👍

Good job

waoww. luar biasa . semoga selalu dapat berkarya

شكرا

Excelent 👍

Good job ... bro

Nice video 100% genuine 🇮🇳🇮🇳🇮🇳🙏

Minimising the air gap between rotor and magnets will definitely increase the rpm by 20 % in this case

Nice

Thanks.. I will modify my vacum cleaner motor to permanent magnet.. And DC power supply.. The motor exactly same as yours

the rpm meter I use takes 2 strips of tape to get the right rpm or 1 strip of tape needs to be divided by 2 for correct rpm

@MrElectron

4 жыл бұрын

rpm will get doubled with 2 strips which is incorrect

@abheysinghmertia8640

4 жыл бұрын

With respect you and your inovetiv product for domestic use. If you have any type small divice to convert 220v AC to 220V DC. Please send details, I will be thankfull. Please contect to me on mobile no 8209047171,7340335138,9782385138

@manuelgaldamez6275

4 жыл бұрын

Abbey Singh Mertia you can use a rectifier for change from ac to dc, but it looks like you dont have to much idea of electricity so I ask you please to dont do it bro

@chandruasp

4 жыл бұрын

@@abheysinghmertia8640 use a bridge rectifier of 5 amp or more to be boxed for safer usage and no need to use condenser/capacitor

@stevetobias4890

4 жыл бұрын

@@chandruasp you can do it without but the capacitor spots out DC ripples after being converted from a sinusoidal wave. As long as it is designed to cope with the voltage being fed through it, for this reason AC capacitors are usually the best choice.

Yes mantap

Compare the energy consuption betwen a copper coil stator and a magneted one please! Considering the bouth identical motors guives us the same mechanical energy .

I have made an electric car.going to setup AC in it.your information is useful to me

Nicely presented experiments..

listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much

Good one

Aswesome tut! Where do you get magnets like those?

@patriotman2122

3 жыл бұрын

You can get these magnets from dc booster pumps

Thanks for giving the knowledge. How you are increasing the speed of permanent magnet motor with 220 DC supply. Is there any arrangement for that.

@DL-kc8fc

3 жыл бұрын

If you remove the excitation winding, there is no possibility of regulation or direction of rotation. You need to make a controlled DC power supply. Permanent magnets lose their effect over time. That's why the solution with the excitation coils is the best. In addition, these commutator synchronous motors are universal - they also work on DC without any modifications.

Güzel uygulama.Tebrikler.Tabiki elektrik ve elektronikçi genç kardeşlerimiz iyi takip ederlerse zarar görmezler diye düşünüyorum.

@tahsinoezguen3911

3 жыл бұрын

mixer veya süpürge motor olarak universal motor ac ve dc ile calisir. ama stator alindiktan ve miknatis stator ile bu sadece dc olarak calisir. video basligina bakarsak rpm 17000!!! insanlar aptal yerine alinmis! rpm 17000 ve üzeri sadece cnc motorlarda olur yani 3 fazli motorlarda...

Nice video . What is the rpm of the rotor at 230dc with the magnet?

Great work !!!! how can I use to it a DC generator ?

Can the 2 coils you remove from original mixer motor be used as a transformer?

@MrElectron

4 жыл бұрын

Lets see that in one of my upcoming videos 😃

@pkravikumarpkravi832

4 жыл бұрын

@@MrElectron v

I didn’t found the link to banggood here in description

dude becareful that magnet can fly in any direction anytime you know that right :D

It would be interesting to see if we can increase the torque by modifying the armature.

@hasuo9749

2 жыл бұрын

High magnetic strengh magnets for high torque ( but lower rpg that's clear ) Lower magnetic strengh magnets for lower torque ( but very high speed )

0:37 this is brush one n this is brush do 😂

Really normal mixer grinder becomes energy efficient and higher speeder one.

Can this DC motor run on battery? If yes which battery you suggest?

ما هي التعديلات التي قمت بها في الماطور لتشغيلة من كهرباء إلى بطارية شكراً لك

How do you make a PC board to control the RPMs rotation of a motor with magnets

Legend.

What the reason of switching this motor to permanent magnets? This kind of motors works well with dc current just switch winding connection to parallel

Super

Dear Sir, Can we use a dc motor to run a kumar piston pump? Which dc motor do you suggest?

From which source do you get 230 DC volt?I wanna try it

Thanks sir

Supper. Kaani mixer grainder ki set chesi chuupinchandi. Jar runn avutundaa. Chatnee ki use avuthunda. Answer video chupinchandi

tuyệt vời quá

From Where did you buy those magnets

How you doing the speedup of this motor please explain

Hola gracias soy de México, donde conseguiste los imanes?

@scammergaming7776

2 жыл бұрын

you get it from speakers or old big dc motor also🙃

i like this music 6:40 :'v

Can you tell how to run stepper motor in easy way

Good, but if i use neodimium magnets?

Mantap

That's the sound we want to hear bro

@dioniziacavalcante3626

3 жыл бұрын

Prasath Nagarajan CANAL Minha Oficina Minha Vida

Legal

5:00 Where you found that large concave magnet ?

@JoeNathan42420

3 жыл бұрын

From an old dc motor

Tenho vontade de construir um motor tipo esse aí mais com a potência maior tipo 10 ou 15 CV ou do Brasil nordeste

Hello friend thanks for your vedio, I will be thankful if you made a vedio that, how to rewind the armature winding with asemetrical type winding,, I saw it consumes very less power and delivers very high torque.

Superb...... Super Sir where available this magnets Please reply me sir

@mrelectron_alternator

4 жыл бұрын

Banggoods or ebay .. Link for banggoods site is in description

@ratin5288

4 жыл бұрын

Where is the link to the banggood to get this kind of magnets?

@LoganT547

4 жыл бұрын

@@ratin5288 in the description 🙄🤦‍♂️

@ratin5288

4 жыл бұрын

Logan T there is no link about magnets!!! Look at first, and then write something like you wrote) or show me where is that link in description!

@johnruscigno5738

4 жыл бұрын

Ironically, you find them inside of permanent magnet dc motors. So maybe you can find an old burned out motor and salvage the magnets inside.

Add video on making bldc motor

What is the reason

where i can get that concave magnet?

THANKS A LOT , BUT PLS HOW CAN I PRODUCED CONCARVE MAGNETS HOME MADE

I love you bro

I have a 110 v sanding floor machine that I wish to convert to run on both 1110 and 240 do you know where I could find instructions to do this, please?

@scottvan1898

2 жыл бұрын

Just install a transformer 110 to ▶️240 , easy way.

Armutter can burn at 230v dc or ac without field windungs

@MrElectron

4 жыл бұрын

I took a risk

Ok felicitari

Replace the DC carbon brush instead of AC.

Brother, what type of motor you showed for demo and where such type of motor available. Plz. inform me.

Nice video

From what device you can get 200 volt dc suply ? And how many ampere ?

Bro... We can convert this armature to wind power..?

like speed

Dear friend I have the same motor I converted it to work in DC . but I need high DC voltage . could you till me how can I make more than 120 v dc

Hello, i need to make miniature ac motor with high rpm. Could you help me with it??

how many voltage I give to this rotar in DC

Where does you get the motor

Can you rewind the rotor to make it a low voltage dc motor?

@MrElectron

4 жыл бұрын

Yes

Could this run a small go kart

How did you make your 230 volts dc power supply?

@Mohammed-zy2vv

3 жыл бұрын

230 v ac with a full bridge rectifier

Magnetic field working on plastic body gravity gone in METAL and metal you dont not that matter METAL and METAL

Sie sehen, dieser Gleichstrommotor im AC-Wechselstrommodus ist eigentlich ein guter DC -Motor und funktioniert normalerweise sehr gut. Eine kleine Berylliumlegierung auf der Oberfläche und die Elektronenspatel zerstören das Material nicht , es hält zehnmal länger. Bürstenlos ist Unsinn. Bessere Pinselkohlen können sehr viel bewirken. Eine breitere Klemmbürste und Sie haben einen guten seriellen über mehrere Kontakte am Kommutator kombinierten Motor im Gleichstrommodus. Ansonsten ist es nur geringfügig für Gleichstrom ausgelegt und für Wechselstrom adäquat geeignet. Wenn Sie an jeder Seite der blanken Magnete ein rechteckig geformtes Neodym einfügen möchten, beispielsweise in der Mitte, ist es wenigstens keine Strom fressende Wechselstromgleiterturbine. Letztere sind eigentlich nur kostengünstig als sehr mittelprächtig schlechte LIchtmaschinen mit Gleichrichterdioden zu gebrauchen.

You should use neodymium magnets

@MrElectron

4 жыл бұрын

upcoming

@null-xv3eq

4 жыл бұрын

@@MrElectron when

@sachityadav4328

4 жыл бұрын

@@MrElectron I guess you are from India Am i wrong please reply?

Sir can you make brushless Ac motor controller with an out put of 220 volts ?

How can I design my own brush

How do you know those are 17k rpm? Why don't you measure it innthe video?

Nice. What kind of DC power supply were you use in order to change the motor speed?

@oneeyemonster3262

4 жыл бұрын

You should be asking...can it haul a 200V battery around ???? Lmao

what are you using to get 230v dc in this video?

@MrElectron

4 жыл бұрын

I will make a video for it

@duminicad

4 жыл бұрын

Probably 2 motors with connected shafts, apply ac to one of the motors, get dc on the other motor wires

Can that DC motor work for disc sander ???

@jimmyjames7015

Жыл бұрын

I believe so. I have similar motor that came out of a weed eater. Supposed to be 7700 rpm btw it's 115v

Can I modify my starter motor car as this project?

Lets mount is strongly *uses superglue*

If I increase the magnets power improve torque?

@MrElectron

4 жыл бұрын

Yes

How many Amp??

just overvolt it and pop it. clamp it into a vise, bolt the vise to a concrete floor and Connect a 100 MV 1000 kA power supply at once.

@MrElectron

4 жыл бұрын

😂

Hai... Haw you get the magnet?

what is that kind of magnet?

هذا الماطور مال خلاط مال عصائر ⭐🇮🇶⭐🇮🇶⭐