14 bolt 40 spline front axle build part 2 Yukon, busted knuckle, Reid racing, all the good stuff!!!
Жүктеу.....
Пікірлер: 14
@ultra4suzukisamurai6794 ай бұрын
Sweet Jesus, what does that housing weigh? BEEF! Awesome video.
@rosinsautofab1956
4 ай бұрын
Let’s just say it would hurt if you dropped it on your toe😂
@othoapproto960315 күн бұрын
I'm sad you skipped past the Adjusting Lock Nut assembly. BTW a caliper is not a micrometer, also buy your self a digital Mic and Caliper. "I wont worrying you all on the preload" Translation, it's to hard to film and edit it. other wise thanks for the video.
@rosinsautofab1956
14 күн бұрын
Thanks for the feedback, fully aware of the difference of a micrometer and a caliper but when you’re videoing and trying to build something and also trying to explain to yours at the same time, a lot of stuff gets lost in translation as you could imagine never been a fan of digital, went to college for machine and lathe
@patrickhickman87232 ай бұрын
where did you get the inner axle seals?
@rosinsautofab1956
2 ай бұрын
Busted knuckle off-road they are made by seals-it I believe
@huckstirred71126 ай бұрын
why not run reverse cut gears
@rosinsautofab1956
6 ай бұрын
It’s a standard gear set
@saddlebag409710 ай бұрын
ok do you run reverse cut gears? or? how does that work swapping a 14 bolt to use in the front? Or do you just run it on the back side of the gear?
@rosinsautofab1956
10 ай бұрын
Same gear, yes it runs on the coast side👌
@sc358.11 ай бұрын
What do you have into that axle in parts? I'm buulding a 73 k10. Was thinking about doing 14 and 60 but 🤔
@rosinsautofab1956
11 ай бұрын
About 20k with the hydro steering and wilwood brake package, I’m in the middle of editing a video on the buggy reassembly and it will have the finishing touches on the axle and install
@sc358.
11 ай бұрын
@@rosinsautofab1956 😭 didn't wanna hear that price. Guess I'll have to try and make a 60 work and just not be too wild in rocks. It's mostly gonna be a street truck but wanna build a 900-950hp 598 and have fun thrashing every now and then.
@rosinsautofab1956
9 ай бұрын
60’s are good but not with horsepower/torque, no pinion support and it strips teeth off the ring gear, I killed 3 gear sets last year with my 600hp Lsa🤦♂️
Пікірлер: 14
Sweet Jesus, what does that housing weigh? BEEF! Awesome video.
@rosinsautofab1956
4 ай бұрын
Let’s just say it would hurt if you dropped it on your toe😂
I'm sad you skipped past the Adjusting Lock Nut assembly. BTW a caliper is not a micrometer, also buy your self a digital Mic and Caliper. "I wont worrying you all on the preload" Translation, it's to hard to film and edit it. other wise thanks for the video.
@rosinsautofab1956
14 күн бұрын
Thanks for the feedback, fully aware of the difference of a micrometer and a caliper but when you’re videoing and trying to build something and also trying to explain to yours at the same time, a lot of stuff gets lost in translation as you could imagine never been a fan of digital, went to college for machine and lathe
where did you get the inner axle seals?
@rosinsautofab1956
2 ай бұрын
Busted knuckle off-road they are made by seals-it I believe
why not run reverse cut gears
@rosinsautofab1956
6 ай бұрын
It’s a standard gear set
ok do you run reverse cut gears? or? how does that work swapping a 14 bolt to use in the front? Or do you just run it on the back side of the gear?
@rosinsautofab1956
10 ай бұрын
Same gear, yes it runs on the coast side👌
What do you have into that axle in parts? I'm buulding a 73 k10. Was thinking about doing 14 and 60 but 🤔
@rosinsautofab1956
11 ай бұрын
About 20k with the hydro steering and wilwood brake package, I’m in the middle of editing a video on the buggy reassembly and it will have the finishing touches on the axle and install
@sc358.
11 ай бұрын
@@rosinsautofab1956 😭 didn't wanna hear that price. Guess I'll have to try and make a 60 work and just not be too wild in rocks. It's mostly gonna be a street truck but wanna build a 900-950hp 598 and have fun thrashing every now and then.
@rosinsautofab1956
9 ай бұрын
60’s are good but not with horsepower/torque, no pinion support and it strips teeth off the ring gear, I killed 3 gear sets last year with my 600hp Lsa🤦♂️