💡Answering Scooter Questions Here💡 📌kzread.info/dash/bejne/qqJ21q2xktOwebg.html 🛒 Buy Parts To Make Your Scooter Faster Here: www.nthefastlane.com/100cc-big-bore-kit-test-run-store 🛒 Visit Nthefastlane's Amazon Store: amzn.to/3pP4UCy

@Lastyoutubegosh

6 жыл бұрын

hey what roller weights are you using in for you to hit 60

@Nthefastlane

5 жыл бұрын

@@Lastyoutubegosh The 7g kit in my store. Link: www.nthefastlane.com/gy6-scooter-50cc-to-100cc-kit-store

@Lastyoutubegosh

5 жыл бұрын

@@Nthefastlane just asking what main jet are you using on the 150cc carb

@Nthefastlane

5 жыл бұрын

The 24 mm carburetor in my store. Comes with a 105 main jet. That is the carburetor and main jet I'm using.

@deeloc1993

4 жыл бұрын

I have one and the guy I got it from said that it has a 82cc big bore kit on it and the speedometer says I'm going 40-5 but following behind me in the car my old lady said it's going 4-5 mph slower than what my speedometer says

I enjoyed your video, one of the best. I put a 100cc BBK on a 50cc scooter last week ... the math says it's now 81.3cc ... that's still 62.6% more displacement !. I'm old and I don't need more top end speed, what I need is to not block traffic pulling away at the stop lights and hitting the 35 mph speed limit on streets where that is the speed limit in a reasonable distance and amount of time. I was shooting for enough torque to be able to do this. I'm still tuning and from the smell of things a new belt will be needed soon. Yeah, I'm an old fart but having fun with the scooters. I was young once and it was all about how fast you could make things go, now days it's about just getting there and back and in one piece. I first heard this over 50 years ago..."speed costs money, how fast do you want to go?" Someone ought to use the G force calculator on a smart phone to show the difference in "pulling power" of 50cc vs 81.3cc. Now guys these little scooters are what they are, a basic mode of transportation for billions of people, hot rod them and.... oh forget it you won't listen any better than I did years ago.

@hanswasiecko6790

5 жыл бұрын

ya with the stroker its 96 cc I've noticed its you absolutely need attest 1500 rpm yellow torque springs the 3 in the clutch and the big one in the variator but for me 1000 rpm ones are just awesome

@MiguelLopez-sj2ib

2 жыл бұрын

Please tell us how u came up with that number

@MiguelLopez-sj2ib

2 жыл бұрын

What math work did you do ?

I just tuned my Air/Fuel screw this week,I now I hit speeds of 60+ mph leaning in and 52+ sitting upright.

@armdrop101

Жыл бұрын

Air screw should just be for idle

@jeffmee763

Жыл бұрын

I no its old now but the engine is running in you got to remember it's takes 300miles if you do a compression test after rebuild and one after 300 miles big difference sometimes 40 psi.

I will be uploading a "NEW" Video this week to show everyone how I added the 150cc Carburetor and what you need to make it fit properly. So "SUBSCRIBE" so you don't miss out.

@TheRacer221

4 жыл бұрын

What size is 150cc carburetor ?

At first I was like o shit then I like l life l looked at the speedometer and realized it was in kilometres per hour

@philippesilva2275

3 жыл бұрын

🤣

@kennycooper4038

3 жыл бұрын

Omg 😆 Me too fam 😭

Wow, what a speed difference! I have the exact same kind of moped but mine is light blue. I definitely want to upgrade the power on mine! So far my moped was manufactured as 49.3cc and was already destricted. I can go about 40 mph on flat ground but less than 20 mph uphills. However, it's not that bad considering that I'm over 200 lbs (including my locks and other stuff), but I would love to be able to maintain the same speed, keep up with traffic, and have less impatient drivers tail gating me.

@thomasashman8738

5 жыл бұрын

SegaDisneyUniverse I have the peugot v clic which is the same as this but literally just had the peugot badge, u can derestrict it by cutting the looped green wire in the cdi, standard 50c it will do 45mph

@SegaDisneyUniverse

5 жыл бұрын

@@thomasashman8738 Peugot V what? Anyway, no need for me to cut any wires because I got my moped upgraded to 110cc recently so I'm good, lol.

@thomasashman8738

5 жыл бұрын

SegaDisneyUniverse ah fair enough, basically if you bike is the same as the one in the video, there’s a few versions of the same bike, just sold by different companies, there’s the peugot one there’s a lexmoto one and the one here but the only difference is the front plastic, the cdi motor and frame etc are the same

@SegaDisneyUniverse

5 жыл бұрын

@@thomasashman8738 Oh, okay. I have the same scooter, but mine was made by Riya.

I got a80cc kit on my Peace 2006 and top end is about 58,on flat ground, have performance muffler, and super flow carb along with aftermarket CDI,coil and plug. Last thing I have to do is mess with the clutch springs and varriator weighs and I think I could get another 7 to 10mph. This bike has been run hard for 14yrs I've re built the motor 3 times all 80cc kits could go 100cc but I am partial to 80 over all these yrs I've never messed with the varriator or clutch but that's my next project.

Make sure you get the complete kit which includes the high performance crankshaft if you try to use the stock crank all your work with the top end up grade will be destroyed because the stock crank won't be able to handle the extra load.

You should’ve derestricted it, my friend has this bike but it’s a 50cc with an aftermarket exhaust and air filter. It does 50 but speedos are normally off a couple so I’d say 45, all you have to do is take a washer off by the variator for an extra 5mph

intake is restricted with midle gasket , sould be hole 18mm and stock karb will do the job

I purchased a 150cc carb off ebay around $24 shipped..just type GY6 carburetor and I also ordered a "Carb Intake Manifold" to make it fit,their about $10 shipped on ebay. The exhaust was suppose to fit from the factory but the brackets were off by a few inches so I kept hammering and bending until the mounting brackets lined up with the bolt holes. Hope this helped.

My 50cc QMB139 gains speed as fast as this one, but it goes up to 90km/h+ . performance CDI, soft air filter, performance coil, -spark plug and some adjustment to carburetor - and that was it! 90+ km/h man! :D

@Nthefastlane

7 жыл бұрын

+Roland Helerand It does 56mph now. It needed a bigger carburetor with a 105 jet.

@RolandHelerand

7 жыл бұрын

(Y) Try performance CDI - it does wonders on 4-STROKE! ;)

Look I read everything you all said. What I like to know can I put a bbk on my 50cc or not? At stock I can get top of 40mph.

@Nthefastlane

6 жыл бұрын

What scooter do you have? And is it a 4-stroke or 2-stroke?

@Nthefastlane

6 жыл бұрын

The kits I sell in my store are 139qmb 4-stroke Big Bore kits.

@JohnSmith-nc8zf

6 жыл бұрын

I have 2018 VIP 4Stroke 50cc

@2kwwelding479

5 жыл бұрын

I wouldn't bro..... it will make ur engine blow up u would be better off just doing an engine swap

that thing is begging for a valve adjustment

@firehawk8521

5 жыл бұрын

Jeff Lucier what’s a valve adjustment?

@alexonwheels4190

3 жыл бұрын

@@firehawk8521 😂your poor bike

@dommyfernandez7705

3 жыл бұрын

It seriously does!

@gavinfoxwell5137

3 жыл бұрын

Never set them right in the first place always adjust the stroke of the rockers to either intake or exhaust at slack

@_li1.loc3_8

2 жыл бұрын

how can you tell

Also, Nthefastlane, you might want to pick up one of these Mikuni carbs as well, I've used them on 50cc and 150cc GY6's and for tune-ability you just can't beat them. I even prefer them to the pumper Keihin's, the 25mm body seems to be the sweet spot for a lot of engines, properly tuned they are one of my favorite CV type carburetors.

@Spitfireseven

6 ай бұрын

MIKUNI!! Way to go!! Do you get improved power over the stock carb? The Japanese you would think is better. Is it?

Swap out your stock roller weights for a set of 8 gram roller weights, I've intended allot of 100 cc kits and also use a 30MM carve you should get almost if not 55-57 mph also set your valves at. .04 intake and exhaust

If I have a manual 50cc, do I need to consider getting a stronger clutch to support the extra torque? I'm worried it will blow up on me and destroy my engine when I increase the power.

@cedricske7148

2 жыл бұрын

Preferrably yes because the 50cc clutch plates are not made for that amount of power

how do you put the scooter on the stand? why did you unscrew the trunk?

@Nthefastlane

8 ай бұрын

You put the stand down and then sort of jolt the scooter backwards while holding the stand down with your foot. It basically lifts the scooter up. It takes a little bit of force. Then to make it go back down you just push the scooter forward. As far as the trunk, better aerodynamics without it. I just use the seat for storage.

Nthefastlane have you experimented with 2.88 rear transmission gears? I put a set in mine right after I did the 100cc bore kit. You gain about 8-10 mph at top end,I built mine right including variator with 6 g sliders and a performance clutch Mine actually hit 62 mph on flat ground per gps with a 153 pound rider

@shermankong2987

7 жыл бұрын

New Beetle how much, what brand clutch

@shermankong2987

7 жыл бұрын

I put a 100cc big bore kit in my gy6 , stock carb, lucky if I could go 20 mph ! SERIUOS !!!! Changed weights went lighter also replaced clutch springs , they didnt have the big one lot better ,,,, now I do 30 mph . WHOOPEE !!! This morning im going to up th He weights a little , we will see oh , gearing wise is it same as cars higher number lower gearing ? U put 2.88 or whats stock would very much appreciate your knowledge !!! Sincerely S.T.KONG ,,,1 - 8084987802 JUS T IN CASE MY CELL MUCH MAHALOS

@shermankong2987

7 жыл бұрын

Hey new beetle, because of safety check laws in Hawaii alot of kids r selling I was thinking I just might p/ up a 150 cc and put it on my bike its cheap ! $100, $150 SERIUOS! !!! LLOKKing at 1-clutch $ 100 then gearing $ 60 next $$$$ might be mo bettah !!!!!

@newbeetle5413

7 жыл бұрын

If yours only goes 30 mph you either have your valves adjusted too tight i set mine at .005 thousandths or you did not get the flywheel set at T.D.C and you put the camshaft at the wrong position when you put the timing chain on Also you need to make sure you have the correct air cleaner on the scooter they run best with the stock air box As far as putting the 150cc engine on it I have done it you need a good welder and you need the 150 frame engine mounts off the donor scooter . Also you are running the bore kit with a stock carb? it will run too lean replace your jets or buy a performance carb. But by law I can not suggest you do it And remember the 150 uses a bigger and stronger frame plus bigger brakes that you really need If you want to go faster just buy a 150 or bigger bike

@ipaddy

7 жыл бұрын

New Beetle I agree with your post nearly all the way but disagree regarding the air filter I have never in 42 years tuned a scooter or bike and found the stock box would do, they strangle the carb if you up jet or fit a bigger bore carb you need more air I use K&N filters with great results ride safe my friend

Comparing your "2-STROKE"speed to this "4-STROKE" isn't comparable.4-STROKES last 10 times longer and have 100 different moving parts then a 2-STROKE.

@bigbellyking

9 жыл бұрын

Hi, I have the Same scooter as you do. I installed the big bore kit in mine a week or so ago. I added a Race CDI box and replaced carburetor with 88 main jet. My scooter will only go 38MPH max. Before all mods it was at 33MPH max. I installed the same big bore kit on my dads TAO TAO 50cc and it will do almost 50MPH. What gives? and ideas? I tried 2 different carburetors. thanks Scotty

@MetroLinerXLZ

9 жыл бұрын

Scotty McMasters Check your variator (front pulley). It may have a restriction ring on the drive boss (the piece that the variator rides on). Remove that ring, put it all back (make sure you put the drive boss back on WITHOUT that restrictor ring), and then test it. You may also need to remove a small restriction in your exhaust as well. Beyond that, additional mods (final drive gear swap, exhaust upgrade, and full CVT upgrade) are required. Keeping the tires pressure up and the rims in good condition also help with top end.

@daand12

9 жыл бұрын

Scotty McMasters Remove restriction on the variator. Or just get a sport variator and it will easly go over 40mph with the cdi restriction not removed.

@cparks1000000

9 жыл бұрын

+Big Mac (Southern Militia) Can you send me a link with the Big Bore Kit you used and also the CDI Box?

@michaelboot

8 жыл бұрын

+Nthefastlane Due to the fact that 4strokes have more moving parts they usually don't last longer than 2 strokes. More logical

I have a 139qmb 50cc and when it was stock it was pushing 45 mph and I put a new variator with 5g rollers and a new clutch and bell with 2,000 rpm springs and torque spring and it still pushes 45mph and just rides better when up to speed with no.carb work done no air filter mods or anything just the clutch and variator

Yes, it sure does..I always wear a helmet unless it's around the block. No need for license & insurance with anything under 50cc.

I Would change the exhaust, you should be abel to get Way more power out of a 100cc. I'm riding With 70cc and 17,5 mm carbu and it runs about 90km/h

@Nthefastlane

5 жыл бұрын

Ended up being too small of a carburetor and main jet. After the upgrade, got to 56 mph flat ground.

@firehawk8521

5 жыл бұрын

Wait fellas my 49cc goes 85 kmph or 50-55mph why does your upgrade not go any faster??

@SHx589

4 жыл бұрын

Fire Hawk jetting/exhaust/air filter

@nickskuhmd

3 жыл бұрын

You guys talking about 2stroke i think, this is 4stroke. 2 stroke is way faster.

@stevenhowie1135

3 жыл бұрын

@@Nthefastlane what carb did you go with and jet size just curious i did the same thing. 150cc carb though

My one with stock 49cc and 6'5 rollers goes 75kmh, obvously all limmiters out. With 8g rollers or sliders, diferent transmision, and the 100cc it should get arund 90 +- at least

@newbeetle5413

7 жыл бұрын

Yea I don't think he did something right, rule of thumb you build the hell out of the engine it will get from 0-say to 50mph a lot faster BUT if you want more top end you combine the built engine with 49 Tooth & 17 Tooth Gear Set Gives you a Nice 2.88 Rear Gear Ratio

Aren't you supposed to break in the cylinder by driving really slow for about 250km?

Hold on my basic 49cc goes faster than that! Why? Mine is a baodiao 2019 express

@marcusnmasterpotter9569

4 жыл бұрын

Same I have the 2020

ahh, 100km/h speed. love that feeling when riding my 125cc. consumes, 38km/L though... my question is, is it harmful to my scooter's engine if I keep running at top speed? you got nice exhaust, by the way.

Yes, 53 mph using my android speed app via gps, surprisingly the speedo on the scooter is 100% accurate.

Nthefastlane nice video. Watched your other video tutorial on how to install bbk 100cc and mines went smooth!! But just wondering whats your top speed on it flat ground, grams of roller weights, torque and clutch spring u got on it? Im pretty sure your jet is 85 - 90?

In Sweden these are called bögpulkor

@eliaslundstedt5607

4 жыл бұрын

Ursäkta va? Hahaha har aldrig hört den

So I did the 100cc big bore kit on my 2014 icebear ruckus clone, 2300 miles later my crankshaft is shot and I'm shit out of luck till I replace it. Would have been nice to know beforehand since this is my only form of transportation. I can't seem to find a crankshaft under $150 that can handle the big bore kit

@Nthefastlane

10 жыл бұрын

I've been running mine to the ground with no problems, I even cruise with my gf on it for miles, if the cranks gonna go it would of gone a long time ago with 300lbs+ on it. I use Castrol synthetic oil.

@adamsmith2732

10 жыл бұрын

What weight

@piperpilot26

9 жыл бұрын

This is why I don't modify scooters, or in my case, motorcycles. Especially if it's my only source of transportation. As a matter of fact, my Kawasaki Eliminator 125 is my only source of transportation. It's completely stock. I won't even try and do an exhaust upgrade. If you needed a faster scooter (100cc or more) you should have purchased a 150cc instead.

@DevintheHIGHRISH

9 жыл бұрын

Shaun Daskam what fun would that be i like built not bought power

@piperpilot26

9 жыл бұрын

Devin the HIGH-RISH There's nothing wrong with building bikes. But in my case, I use my bike for transportation. I can't afford the bike being off the road. So for me, I would buy the power. It's sort of the best of both worlds, fun and reliable.

Wait you said 100cc big bore and a 150cc carburetor right ??? just asking don't wanna blow myself up can you put a 150cc carburetor on a 150cc Big bore kit on a moped which one you think should I do ???

I just blew mine up like this one exactly I had intake valve got tight I just set them 2 months ago without a filler gauge.i got find what failed belts fine I was riding it hauling ass prob 50 mph or faster it was screaming it got loud like the exhaust broke loose from the head today loosing the intake valve it locked up when it happend last week today I.turned it over but somethings wrong I got pull heads .

What should I do? I added the 100cc kit to my 50cc scooter. It has way more speed now doing about 40mph. But it floods very easily going uphill and loses power when I hit full throttle. Idk what to do at this point

How did you upgrade a stock carb into a 150cc carb? What size jet are you running? I did the cylinder and piston upgrade stock cam, valves. Its an 80cc now will the other upgrades really weaken my bottom end if im just using it for transportation an not to race with?

@Spitfireseven

6 ай бұрын

I think he's kidding on the carb. I ordered a carb for my 150. I ended up putting it on the 50 and it is a perfect fit. It is identical to the carb that came off the 50. I think 150 just uses gas faster. The 50 was stepped up to 100 and it clearly goes through the tank quicker.

I like to know what kind of big bore kit was used. And is there other upgrades. Thanks so much

Shouldve got a two stroke. I drove my buddys VIP moped brand new and with the new upgraded carb i do 40 mph. Down hill. I bought a two stroke 50cc moped. And wow... Kymco super 9s liquid cooled and holy shit.. No mods on it. And i top out 51 mph completely stock on a flat road.. And im a pretty big dude. I weight 210 lbs. Im buying a 70cc big bore kit for it and a free flowing exhaust and bigger pilot jets for the carb. And changing the clutch. I want to do atleast 65 mph on it. Or atleast above 60 mph. Wish me luck!

I have personally owned 2-Cycle Aprilia SR50's... Now recently picked-up a Chinese 50cc scooter and the difference in Sound & Performance does not begin to compare with one another... Aprilia's put these Chinese Scooters to shame... I only had a 70cc Kit/ Ported Head/Dellorto Carb. finely Tuned to a Polini "Expansion Chamber" And would Eat Gy6/150cc's for Breakfast, Lunch & Dinner...! Going to move up now to a 90cc Polini Kit...😱

that doesnt seem right for a 100cc somthing else is wrong i have a 49.5 cc and i have no problem staying at 45 mph on flat ground u should be doing 60 mph

@Nthefastlane

10 жыл бұрын

I'm about 56mph now after a few tweaks.Living in FL kills speed with the heat and humidity.

@spitscuba

9 жыл бұрын

Nthefastlane try the valves at 4in and 5 ex :) have a good day

@spitscuba

9 жыл бұрын

johnporter jp o yea make then snuggy on the valve feller

@m103904

6 жыл бұрын

johnporter jp gearing can make it harder to get that top speed.

@k3vlarsnare

6 жыл бұрын

I took my scooter to Pompano for a tune-up, worst mistake ever they tighten the Rockers to where there's probably .001 on my 50cc. Almost no compression, they filled the oil over an inch past the fill line, it was riding up the dipstick and I told them not to change my oil because I had just done it for 5 days prior also, they got Grime in my gas line, fuel filter or whatever. Pretty sure it made its way through my carburetor which they had to have taken off because the needle was bent. Before I went there for my tune up I was hitting 50 and probably even passed that. I had no compression when I left it wouldn't stay started so I turned around went back only for them to crank my idle screw a full turn without even listening to it because it was off and I had to go to work so I had to leave. I told them not to change my blinker light because I had it coming in the mail and they charge me 10 f****** dollars for it.. oh me to drive 25 miles back home going 35 miles an hour

You said you upgraded to a 150cc carb. Did you have to modify intake to accept the new carb and how did you modify the exhaust to fit since you mentioned a fit problem in the last video? Can you let me know what model carb you put in and if you are having any issues with too rich a fuel mixture or not? Thanks.

Clip the pink wire under the footboard. No more rpm restrictions. My moped went 47 mph on 49cc's

What was the top speed before?

@Nthefastlane

5 жыл бұрын

30-31mph Stock flat ground. Big Bore Kit and Carburetor upgrade 56mph flat ground.

What was your MPH before the big bore kit?

@Nthefastlane

7 жыл бұрын

mrk107 36mph top speed. Now the Bbk with the 24mm carb and 105 jet I hit 56mph.

Yes, 26mm 150cc Carburetor.

Did you do any upgrades to the CVT or Clutch in this video, or is this video just the Big Bore kit Install?

@Nthefastlane

5 жыл бұрын

Yes. My full upgrade list is here in my store. Link: www.nthefastlane.com/gy6-scooter-50cc-to-100cc-kit-store

Many years ago i used to ride a stock 80cc Piaggio. It did 58mph clocked in.

what is your GPS speed? I have the same scooter but a Yiben, I think the company that makes them makes about 6 lines, the speedometers are crap in these, no where near close. Is yours the heavy gross weight frame? most scooters ave cheap frames, the one I have has the 350 pound gross frame, and the frame is substantial compared to most

I found that a 150cc carb works nice with a Hoca 50mm big bore kit. And use a Hoca cylinder head. change the gear in the back for higher top speed. If you want to go fast use the 60cc head and run cam 2 raceing fuel.

@pongothecrownvic474

Жыл бұрын

Can that work on gy6 50cc moped?

I have a 150cc that I can only get up to 52mph....what's going on?

Do you need a specific kit for your bike model?

That's crazy, in my state (Massachusetts) which is infamous for high insurance, for a bike under 750cc it is about $150-$300 a year for insurance since it is small capacity and falls under the "limited use" category, and even registration, title, and plates are reduced cost from a car.

hello if you dont change the cylindre head what happen

i have the 100cc kit and tryed a 90 main jet but it takes 2-3 seconds to drive off when i pull the throttle is it better to buy the 26mm carb and intake?? and was it hard to install to work good ??

Did you get a burnt smell for a few seconds at start up?

@Nthefastlane

5 жыл бұрын

Yes, that is normal. Just new parts burning residual residue.

I have a gy6 stock and it goes so fast that I broke the speed reader 😂😂😂

Hi. What kind of kit did u get? And do u know if it will work on a venom 18 50cc

i have a 08 wildfire with a 50 cc i ordered a 100 cc big bore kit and a 90 jet and 8 g variator weights do i need the weights or not and what kind of speed should i have

Having trouble getting the carburetor tuned right. take off is good but once I hit around 25mph it starts bogging out and I have to let off the throttle to around the half way open or a little less before it starts accelerating again.

And if i got big bore kit... How fast would you say it would go with my 50cc moped without the150cc carburetor

A stock scooter runs the same speed. Change to 80cc or add more waight to rollers for more top end

Hello I have the same scooter with 50mm piston and go 70-72kmh with standard nozzle and 7gr rollers weight with Koso variator. How is big main jet on your scooter and roller weighs on variator... Sorry for my bed English, I hope you 'll understand :)

I get 45Mph topspeed on my 50cc so 100cc only gonna give me another 4mph?

How did you get such a high top end

I have the same scooter but a few more miles on it. It has trouble starting up and idling, I've tried adjusting the valve lash and would like to clean the jets but the previous owner stripped out the screws. Any other ideas of what it could be? Also where at in Florida are you guys?

This is pretty hilarious. I don't think you actually realize you're riding a scooter. You're talking about a scooter. A scooter. A 100cc scooter. It's struggling to reach 80.

is there an age restriction to ride with 100cc bore kit?

okay is it 47mm 50mm or 52mm big bore???? there is more then 1 big bore size for 50cc 139qmb gy6, funny thing i noticed your test run seems like you have the stock 39mm bore in place my 50cc stock goes up to 45-50mph model bd50qt-9a but it is also a 1p39qmb i also weigh a solid 290 - 305 pounds. makes me wonder how much better it could be with a 50mm big bore haha from what i hear the 1p39qmb shaft and 44mm stock bore is better for performance gives it more speed.

I'm confused my 50cc tops out at 70km/h so I should not do a 100cc swap 🤔

@Baldys_projects

5 жыл бұрын

The 100cc bbk is not going to be able to make the top speed faster it will simply get you there faster, the CVT will need modified for more speed mainly it needs a performance variator to hit a higher top speed.

What size jet would you use for a 50 to 80 cc big bore I think it's 86 size

Nthefastlane if i weigh around 115 and my wolf rx50 can do around 46 with me on it on flat ground, what would i be expecting with this sort of kit around like 55 no problem? and for a 20+ mile commute to work, would a kit like this help the rx50 out in the longterm or should i just buy a 100cc since i have the money available to do so? thank you very much.

@Nthefastlane

8 жыл бұрын

Yes expect at least 55mph with a 24mm carb with the stock 105 jet and 7g rollers. Link to all my parts to purchase on Amazon is under the video.

Probably would run better if the valves weren't set at .100" hahaha

@newbeetle5413

9 жыл бұрын

Actually it sounds like they are set at .006 that's where my valves are set if you set them any tighter you take a chance of the piston hitting the valves at high revs

@muhammedsari3229

3 жыл бұрын

My naraku 72 cc bigbore kit is faster then this

@702johnny

3 жыл бұрын

In the video of when he was installing the kit, he set the lash to .004 on both the intake and exhaust. Doesn't sound that great with that adjustment though.

whats the difference between 64mm valves/69mm valves. is the 69 more faster or does is perform differently

@kirklong5067

9 жыл бұрын

It only means that the valve is longer by a the difference. However the the longer valve head has more material in it if you decide to port and polish. The smother and enlarged ports allow for more flow of the gas and air and horsepower in these small rely on flow.

What should I get for my 4-stroke Zuma?

Can you get in trouble for making your 50cc a 100cc or 150cc and another question does it make it faster sorry I’m new

cdi and the gears are limited change the ratio and the cdi with limiter and remove the vario ring and mount a higher rear tire....adds another couple mph too

Euhm idk if it's worth it my rcb 4stroke gy6 (50cc) CDI deristricted and malossi multivar and a bigger jet reaches the same speed...

70 km an hour is 43 mph is that all you got with a big bore kit 100cc?

What size main jet and pilot jet do you recommend for carburetor on a 100cc bore kit?

@Nthefastlane

5 жыл бұрын

If you read the 1st comment I always post my store. Look for the shop this video link. The carburetor I recommend is in my store, it comes with a 105 main jet. You get a lot more torque. You will need to buy the 50CC to 100 CC rubber intake neck for the carburetor to fit. I also sell it in the store.

@Nthefastlane

5 жыл бұрын

Link to video and store: kzread.info/dash/bejne/mGiClrOvqJitZbw.html www.nthefastlane.com/150cc-carburetor-50cc-gy6-store

@wcampfield8191

5 жыл бұрын

Ty

You will need a "Gy6 150cc intake manifold" for it to fit also.

The main jet is 110 & the pilot jet is 135..but that's what a stock 150cc carburetor comes with

i plan on doing this next weekend, thanks for your info

Why does it red line at 45?

which size jet for 100cc bbk,carburator is keihin pd 18 for 50cc..

Did you install the stroker crank???

How Fast did it go before the kit

Sounds like mine i love mine for around town and back roads

get a aftermarket racing cdi box it deletes how high u rev it the regular cdi box slows u down

Hey , i have a malaguti F12 mod 1998 (49cc) i wanna make it 100cc , will they consume more fuel ? and what will the maximum speed be ? Thnk you for this video

What about the crankshaft? No problems?

@Nthefastlane

6 жыл бұрын

+Illuminati Kid No Issues since 2013. Still runs perfect.

U SURE DID A GOOD JOB ON THAT BIKE..

I have her from some people that some states do not even require a plate or registration or even insurance. my state just started requiring insurance a few years ago. but we do have it whear if the bike has working peddles then nothing is required

Nthefastlane have you ever swapped out the rear gears after a upgrade to 2.88's? you will gain about 10 mph at top end

@Nthefastlane

7 жыл бұрын

New Beetle I'm actually going to be doing a how to on installing the final drive gear. I ordered a certain one a while back. I believe a 17teeth and 30 something.

@newbeetle5413

7 жыл бұрын

I used the 49 Tooth & 17 Tooth set it gives you a 2.88 rear gear ratio big difference and still launched real good

@Nthefastlane

7 жыл бұрын

New Beetle Yes that might be the one I purchased, I'm not buy the gear so I couldn't tell you right off the top of my head. That's exactly what I'm hoping for. I definitely don't want to lose my launch.

@newbeetle5413

7 жыл бұрын

It will be like night and day with the new gear set

@ipaddy

7 жыл бұрын

I m really enjoying watching and reading what you two are doing I have built and raced scooters for years (Lambrettas) and on most racetracks here in England and the Netherlands I raced on the biggest change of top end is down to final drive ratios most of my races were done with a 2.88 ratio or at a pinch I would change the back tyre to alter the ratio as my scooters ran standard 3.50x10 tyres. after 40+ years of geared Bike and scooter tuning 2 stroke mainly, I'm enjoying learning about Autos its never to late to learn im working on a Scomadi TL50 right now www.scooterlab.uk/wildcat-scomadi-172-retro-custom/

does the big boy go on a two stroke also i just bought a brand new 2019 Scootster Racester

did you had a breaking in period?

Try moving the C-clip on your needle down one notch, maybe two (raising up the needle) sounds like your needle is too low and not delivering enough fuel at part throttle, if it still does after that, get the two next sizes up from it and try the smaller of the two first. This sounds like either too small of a main jet or needle too low. If your needle isn't adjustable get a Mikuni CV carburetor off of ebay (google varietystorefront for the seller) about $60 bucks and it is a great carb.

could you tell me the exact carburater you got ? i have the same exact scooter and baught the same 100cc big bore kit. please get back to me as soon as you can. thank you.

Thanks!

@Nthefastlane

4 ай бұрын

You're welcome Varun. And thank you very much for the SUPER! 🥳

that's awesome and I would love to do it but in my state you will get fined and have your bike taken if you get cought modding the bike and not having it recertified and when its over 50 cc you have to have a motorcycle license and its somewhat hard to get wear I live as we have strict dmv instruters that have a higher gradeing scale then what the state sys it should be

Will this fit my honda ruckus ?? And will I need any other parts

@wilbobaggins869

9 жыл бұрын

Catra Killarney you will need other parts

When adding the big bore kit to the 50cc do you have to upgrade the carb? Or should I go with the 80cc , the local scooter shop is saying the 100cc bore kit is issue bound and they don't recommend it. Thanks and great vids

@Nthefastlane

10 жыл бұрын

I definitely recommend the kit and I made a video on how how to install the 100cc big bore kit, go to my channel and check it out.. I used a 150cc carburetor I'll be making a video here shortly explaining how to install a carburetor on the 100cc big bore kit

@Nthefastlane

10 жыл бұрын

Sitting up with a windy day I hold speeds at 46 miles per hour and leaning in a hit speeds over 60 miles an hour.

@KingMarcus0724

10 жыл бұрын

Ok thanks and I watched the video, I'll be waiting for the video