Man... I killed my injection pump by my own mistake when I installed a set of bigger Injectors on my mk4 jetta.. Glad to see someone do it and not murder their vehicle in the process XD. If you love vw diesels I will say the new common rails are amazing once you delete and tune them. I have a 2012 passat and she rips! I can still pull off 48 mpg on the highway which is pretty close to what my old 1.9 could do

@GasHouseGarage

7 ай бұрын

Yeah a lift pump is a must at these power levels for sure! And stay tuned, we will have a commonrail on the channel here soon 😎

@7eis

7 ай бұрын

Perfect opportunity to get a mechanical pump from eastern Europe ✌️

@MrJeepin88

4 ай бұрын

How much bigger injectors If I do mine I was planning on going slightly bigger but not huge

@GasHouseGarage

4 ай бұрын

Cost wise? It really depends on who is building them. I believe the .280’s were around $400

@EdwardOncki-hr2ri

2 ай бұрын

For this engine 0.280 make no sens. 0.216 is the Best choice and make 200hp+ for more power you need another engine like ARL and Will be cheap beacause you need only bigger turbo and chip tuning for 230hp. Why?? ARL have stronger engine block and all parts inside from factory.

currently building a mk4 1.9L. This video is so helpful. keep killin it.cheers!

@GasHouseGarage

Жыл бұрын

Thank you for the support! More to come on different vehicles too!

Seeing this after i crashed mine couple of weeks ago hurts a little bit inside, but hey, it always comes back stronger! You did an amazing job and after im done fixing it up, made me wanna upgrade my injectors aswell

@GasHouseGarage

6 ай бұрын

Get after it! Theyre a blast to drive

now yes seems running good

You give me motivation for my newly acquired 03 golf 4 door tdi manual with 355,066 miles on the dash. All new fluids. Lucas in the transmission. You said it's the perfect daily driver, and I think your right. Now To 500k and beyond

@GasHouseGarage

10 ай бұрын

It’s amazing what these little engines can handle

Definitely wanna see it back at the track

I don't know about 9s ..lol but she sounds and looks like she's happy, good street runner

@GasHouseGarage

Жыл бұрын

I think it has the potential to hit high 9’s in the 1/8 😎

Been a while since I’ve seen this car came a long way I’m impressed well done 👏 Just bought my old mk5 2.0tdi 4motion golf back missed the diesel life haha

@GasHouseGarage

Жыл бұрын

Thanks! And welcome back. More to come. We all have full time jobs right now so posting frequently is a bit of a challenge.

Like the turbo intake pipe

Nice work! Its almost like you are an engineer. Got to ride in ths car and its legit. Pulls like an STI but starts from 1k to redline. Great little sleeper car.

really really good video im proud to be here before 2k im sure this channel will go far and im hoping to see more content!

@GasHouseGarage

7 ай бұрын

Thank you for the support! We really appreciate it. Stay tuned! More to come

The song is amazing for 1.9 TDI VP !

Dude this is amazing, I've been going through kerma tdi (kind of a rip off for the power you get) but I'm invested in this build. You should do a 3 inch straight pipe if you haven't already.

@GasHouseGarage

Жыл бұрын

Thank you for the support! And it’s already got one 😎

Darkside components, top notch From England

I've been driving around with the MAF and EGR unplugged, and all emissions parts deleted and piped, she runs great now, and goes chooo.

wow that sounds amazing too for a diesel

very clean golf nice👍

Glad you took my suggestion for the upgraded tip pipe, I saw a difference on my pd with a gt1752v, you should feel a big difference with response!

@GasHouseGarage

Жыл бұрын

It was night and day!

@rakeandbake

4 ай бұрын

What’s an upgraded tip pipe?

Very cool build! TDI's have a come a very long way since I started modifying mine over 20 years ago. Back then you really only had 2 choices for chips and only a VNT17 for a "big" turbo. One day I'll get back to work on mine. The turbo shaft warped on it about 8 years ago and haven't touched it since. It was a Kerma sourced 1856SV. Going bigger since technology is so much better on turbos now.

@GasHouseGarage

Жыл бұрын

Thank you for the support! The newer generation turbos are great! Lots of people running GTB, GTC, and GTD’s on these cars now. They’re much more efficient

@bradtyson

8 ай бұрын

Gtb2060vklr best Daily

@alpha_king1778

7 ай бұрын

Now how much hp could it push now tho

@GasHouseGarage

7 ай бұрын

@@alpha_king1778 I think the GTB1756VK is good until the low 200 range. maybe 250hp at best.

@farginicehole513

6 ай бұрын

Question for you guys -- how much better are these newer turbos than my 17/22 hybrid?

Guys, keep that sh up, its so interesting to watch, how you build your vw golf, ima huge golf fan, this videos are really helpful. Thank yall!

@GasHouseGarage

Жыл бұрын

No problem! Thank you for the support!

Compound turbo setup 👌

@GasHouseGarage

7 ай бұрын

A likely possibility down the road 😎

I like your style of video and am now subscribed!

@GasHouseGarage

7 ай бұрын

Thank you for the support!

Loving the content. Should take it on the street and see what it can keep up with 🤙🤙🤙

this is one of those cars thats gonna be a cult favourite in 10 years, so easy to get good gains and a fun nugget to drive. Most of the vag group 1.9tdi hatches for that matter, allthough u.s doesnt get the skoda or seat. I'm looking to buy a beetle with 1.9tdi and do a similar build.

@GasHouseGarage

8 ай бұрын

Yeah we really got the short end of the stick on TDI’s. The ones that made it here were always the lowest HP spec for the most part

Cool setup bro! I have the Audi A4 B5 with 110Hp AFN Engine with bigger turbo. 0.216 injectors, central IC and it does 150HP at the moment. Love these old TDI's - can be fun to drive while still reliable :D

@GasHouseGarage

7 ай бұрын

Thanks for the support! And for sure. MPG actually improved a little bit with the new injectors! The old ones were likely worn out after all the mileage

@whatsup8464

7 ай бұрын

Fit an sdi camshaft for longer duration on the valves...11mm injection pump for some more horsepurrs👍

@GasHouseGarage

7 ай бұрын

I’ve heard a lot of good things about the SDI cam. More airflow 😎

thats a sweet build right there

@GasHouseGarage

8 ай бұрын

Thank you for the support!

Get a 12mm right fuel pump head and an aggressive lift plate.. I have .30 injectors.. holly crap.. It's so fun.. vnt 17vb running 26 psi, cam advance 6 degree, fueling 76 mg a stroke on my tune.. heads ported with dual spring. Screaming beast redline at 6500 rpm.. alh tdi

Mk4 was my first car 1.6 16 valve ❤ those TDI's i remember used to get 150 hp with just a remap. You do know a bora front end bolts on i was always looking someone with a blue bora to do it with mine lol they called them bolfs 😂

@GasHouseGarage

7 ай бұрын

Bolfs! That’s pretty funny. Here in the states they call them Jolfs 😂

Bro I just installed rear beam bushings, vr6 front brakes, and some bc coil overs on my alh. I have stage 4 Malone rn w 216s. But ima be doing turbo intercooler and bigger injectors after a 6 speed swap. Glad to see another alh living it's best second life.

Exhaust gas temperature gauge and intercooler next

Saving this channel since I'm looking to get better performance on my 02 beetle

@GasHouseGarage

10 күн бұрын

Welcome!

I'm hoping to get full .230 injectors soon. I have .216 a 11mm injection pump, 10mm pump delivery valves, piggyback tuner and a 1852 hybrid turbo, 3 bar. No idea what kind of power it makes. Nice build u got going man!

@GasHouseGarage

Жыл бұрын

Thank you! Sounds like you got one going yourself too

@fukndrums367

Жыл бұрын

How does the 1852 go, I’m thinking of getting the 17/56

@GasHouseGarage

Жыл бұрын

The GTB series turbos do much better than the old GT style. Less exhaust back pressure and you can make more power with less boost. They also don’t have as many problems with the vanes clogging up. Don’t know much about the 1852 to be honest

Wow, that almost looks professional ! Seriously though, very clean setup. I've left mine stock all these years to minimize the odds that I screw something up, lol.

@GasHouseGarage

3 ай бұрын

Playing it safe is definitely good for reliability

Install the 11mm pump head, look for a 6 speed box....and up the brakes..Big time

Love the build man! enjoying following along. If you don’t mind me asking, where’d you purchase the head studs from? I’ve been bugging arp for about a year now to get an update on production lol and they keep pushing the availability date

@GasHouseGarage

Жыл бұрын

Hey there! Thank you for the support! The head studs I purchased from XDP. I had heard the same thing so I was kind of surprised they had some in stock

Thanks

@GasHouseGarage

11 күн бұрын

You’re welcome!

Take out the headliner from you car, install an alcantara fabric with foam backing and watch your interior become insanely good looking!

@GasHouseGarage

Жыл бұрын

It definitely needs to be done!

Nice to see you have Darkside development parts did not know they ship to the us form the uk

@GasHouseGarage

Жыл бұрын

That they do! And rather quickly too!

@livinglifeboosted1642

10 ай бұрын

@@GasHouseGarage one day when that engine fails in that car hopefully not for a long time I would recommend swapping it with a PD 130 AZ engine they can hold crazy amount of power. I have one of these engines running 400 wheel horsepower stock internals with a GTB, 3072vkr turbo The only thing that has been done to. It is ported pistons and it has been reliable for two years without any sign of engine explosions 😂😂😂

@livinglifeboosted1642

7 ай бұрын

Yes, I think I jinxed myself with this comment. The engine finally blew up recently but 80,000 miles with that kind of power running on it. I have now installed another engine see how long this one lasts.

@GasHouseGarage

7 ай бұрын

@@livinglifeboosted1642 Uh oh! What happened?

What is the fuel filter set up you’re running? Also, did you buy the fuel lines from filter to the injection pump or make them?

@GasHouseGarage

4 ай бұрын

Fuel filter setup is from Nicktane. I wouldn’t recommend the 1-12 thread kit as the filters are difficult to find. The fuel lines running from the filter to the pump are OEM VAG

I have an 1.9 TDI AHF with bigger injectors and hybrid turbo but unfortunately where i live (Portugal) its not possible to have a modified car like yours with bigger intercooler or anything that is not stock is not allowed without being penalized by the Police. Would be alot of fun to have my car with the same mods as you !

@GasHouseGarage

Жыл бұрын

That is unfortunate! At least you can still have a bigger turbo and injectors!

@th3master

Жыл бұрын

@@GasHouseGarage yeah because its not noticeable 🤫

@snowfreak207

Жыл бұрын

I'd like to know what intercooler is there a universal one?

@snowfreak207

Жыл бұрын

I'd like to know what intercooler is there a universal one?

@GasHouseGarage

Жыл бұрын

Hey there! Check our first video out “golf gets a turbo upgrade” We have a link to the intercooler in the description as well as a breakdown of the parts

Hello nice car! I live in The Netherlands and have a golf mk4 arl tdi-gti 180hp and a seat cordoba afn tdi 135hp

@GasHouseGarage

Жыл бұрын

Thank you! and welcome to the channel! Which car is your favorite?

where do you find mechanics like this in the real world

my old alh had injectors identical to the ones you have and with the original turbo gt15 doing 2.1b every day 😆

@cesarsolis6379

Ай бұрын

Nice where can I find these injectors I have a 2001 ALH 1.9 Jetta 5 speed.

@richardlucker

Ай бұрын

@@cesarsolis6379 At the time, I exchanged the original injectors for ones already assembled and calibrated with a larger caliber with a colleague, but if you look for parts stores in Portugal (Santerchips) for example or search for 1.9 vp injector nozzles, they will appear for sale

Were did you get the kit for fitting the pd in tank pump? It looks very tidy. Thanks

@GasHouseGarage

11 ай бұрын

Welcome to the channel! You can get the wiring kit from IDparts

Only more boost, gtb1756 = 30psi ❤

Twin (Garrett gtx5544r) Turbos 😜👍

WoW man, nice build! I have an interesting question, wich smf did you mount? Did you notice more noise or vibration? I'm thinking about swaping mine to, thank you!!

@GasHouseGarage

10 ай бұрын

Thank you! The car still has the stock clutch in it at the moment. We will have a SMF and upgraded clutch from Kentucky clutch going in soon!

@alessdiazlopez54

10 ай бұрын

@@GasHouseGarage wtf and the stock clutch doesn't slip with this injectors?

@GasHouseGarage

10 ай бұрын

I’m equally as shocked hahah but our tuner put a torque limiter in the lower rpm’s to help prevent clutch slippage, so far so good! Right now the power really comes in after about 3200rpms, but it also pulls all the way to 5k

Now did you upgrade your injection pump from the 10mm to the 11mm?

@GasHouseGarage

4 ай бұрын

Still on the 10mm pump

Im putting this engine in a 93 excel.. can you help me get to where youre at

@GasHouseGarage

8 ай бұрын

Sure thing! Have you watched the turbo kit install video? It also has links of where we got those parts. A stronger clutch is definitely recommended. Also, whoever you get your injectors from make sure they pop test and balance them. You’ll also need a nice tune. The key with these engines is not bringing in the power too early to keep the rods from snapping. You can get a budget GTB turbo kit from Darkside if you don’t want to spend the extra for easily swapping the turbo for something else down the road

The Pump nozzles are more expensive than the whole car 😂😂

@GasHouseGarage

7 ай бұрын

Sounds about right 😂

@earlygamer9106

7 ай бұрын

How many firad % are those nozzles ?

@GasHouseGarage

7 ай бұрын

Oh these aren’t like PD’s they’re more along the lines of old school Cummins injectors. The stock injectors for an ALH are 185um or so and the new ones are 280um. The bodies are also a bit larger to increase flow. It was about $400 for the injector rebuild

@earlygamer9106

7 ай бұрын

Oooo that’s Whatsupp because pd’s 100/120 cost here in the Netherlands easy 1000euro or more that’s why I said they cost more than the whole car 😂😂. Btw I’m gonna subscribe your channel I kinda like experimenting with old cars 💯👍🏼

@GasHouseGarage

7 ай бұрын

Hey the $400 still isn’t far off 😂 and thanks for the support! We have more builds coming here in the future, so stay tuned!

What turbo and IP are you running? If you have an EGT gauge, what are your temps at WOT on long pulls? I recently installed a GT1856V, .260 injectors, head studs, SB STG3 Endurance clutch, 11mm IP on my 03 Golf.

@GasHouseGarage

5 ай бұрын

Hey there! Im running a 10mm pump, GTB1756VK turbo. Longer pulls I’d say around 12-1300°F

Just met u at the gas station u got a number

@GasHouseGarage

Жыл бұрын

Hey man! Send me a DM on Instagram, that’ll be the best way. Link to it is in the video description

sweet

I have a pd150 Bora , engine rocks like It’s going to fall out when I start it and turn it off .. I replaced dog Bone mount and engine mounts still does it …. Is it normal for these engines ?

@GasHouseGarage

3 ай бұрын

Diesels are usually pretty harsh on startup and shutdown, but if it seems excessive then you could have other issues. How are the other engine mounts holding up? I was gonna say dog bone but it sounds like you’ve already got that covered

done it with 1z 1.9 from 90 to 200hp

@GasHouseGarage

7 ай бұрын

1Z! The original 1.9 TDI

What are the buttons, in the driver's door pocket?. Greetings.

@GasHouseGarage

6 күн бұрын

Just window switches, window lock and door lock. The ones below are for the gas flap and the hatch release

Nice video! Quick question, what is your fuel consumption now when driving normally?

@GasHouseGarage

Жыл бұрын

Thank you for the support! No different from before. If anything it has gone up slightly. That’s if you’re driving normally :)

@karlisbirznieks9086

Жыл бұрын

@@GasHouseGarage really? That’s amazing, can’t wait for the dyno video.

@GasHouseGarage

Жыл бұрын

Yeah! It’s pretty amazing haha. The MPG increase is probably due to the new injectors. The stock ones had 300k on them so I’m sure the spray pattern wasn’t very efficient. Stay tuned!

Hey forgot to ask what are you using for tuning? And do you know what torque numbers your running?

@GasHouseGarage

4 ай бұрын

Not sure about the torque as the tune has a torque limiter for the stock clutch. This setup should be good for around 200whp and 325-350lb/ft. The injectors are good for around 250whp, so the turbo is the limiting factor after the clutch. Tekmektronics is who we will be using for the updated tune after the clutch

@wafflesarecool1

4 ай бұрын

@@GasHouseGarage oh cool I’ve heard good things about tekmektronics! I was looking to do a tunezilla/malone stage 5 tune later this year with an upgraded clutch, new injectors and nozzles, turbo, map sensor etc but cascade German commented on my post and said they don’t recommend anything over stage 4 or 300 foot pounds without a LSD, and I don’t really want to spend $1000 on a differential. When I do my Clutch next week I was planning on welding the diff pin, because I know there are common to fail and grenade the trans

it sounds good for a diesel

@GasHouseGarage

8 ай бұрын

Not too shabby eh!

What make are the larger injectors

@GasHouseGarage

2 ай бұрын

Custom built by jaminjection. Check out their website!

Where did u get the box for the air filter? i need 1 f those xd

@GasHouseGarage

11 ай бұрын

Welcome to the channel! That kit comes from darkside developments

How did doing one headstud at a time hold up? Ive done it on a 6.0 ps for a friend but the thing got wrecked very shortly after and never got to see how it held up.

@GasHouseGarage

2 ай бұрын

So far so good! Haven’t had any head gasket issues and the car has had this setup for around 20,000 miles now

@joshhassler

2 ай бұрын

@@GasHouseGarage nice good to hear! Thanks!

I have a similar setup...what tune are you running... I need some help understanding maps...I want to start learning to doy own Fuelling and tuning.... Mine is currently.smokey on the top end under WOT

@GasHouseGarage

6 ай бұрын

We had the tune written for us. If it’s Smokey and losing power at the top end you might not have enough airflow. What turbo are you running You could also try advancing the injection timing some

@gmcassell1

5 ай бұрын

Its a Gt1749 Hybrid... Thanks for the tip..I'll look into that..

@GasHouseGarage

5 ай бұрын

Yeah you might be running out of air up there. I’d look into getting a GTB series or newer turbo they flow much better than the old GT series

120% injectors, gtb2260vklr map done rapid

What are you using for a tuner?

@GasHouseGarage

7 ай бұрын

We had someone custom tune the car. However the interface cable we used was MPPSv13.02

Nice. Now it can keep up with traffic LOL

@GasHouseGarage

7 ай бұрын

I’d say it’s quicker than your average car

@farginicehole513

6 ай бұрын

​@GasHouseGarage He's obviously never driven a modded TDI. The torque is so much fun!

I am about to embark on this journey myself and was wondering if it was not worth just slapping a pd150 in there as they can be had for around the price of a new turbo in the UK £500-800

@GasHouseGarage

Жыл бұрын

That is totally up to you! We never got the PD150 in the states, I believe the highest output PD’s came in Passats here but those were 2.0L BHW’s at 134hp. Golfs and Jetta’s were PD100’s. Don’t be too shy of the VE engines. Our tuner is making around 320whp in his daily VE TDI with large single. I wouldn’t run much more than 200-250whp on a VE without lowering the compression a bit though

@chip1gray

Жыл бұрын

@@GasHouseGarage Never knew you didn't get the big 150pd! I have done some minor tuning on a AAZ similar setup but never big horsepower numbers. Was thinking of putting a full mechanical pump on like a landrover 300tdi pump as that's a common mod here in the UK.

@GasHouseGarage

Жыл бұрын

In the rover, are those the 5 cylinder tdis?

Wish I had friends who would do this with my mk4 jetta lol I'm a total car noob how much did this cost you?

@GasHouseGarage

4 ай бұрын

I'm sure you could find some to help you with your next project! Maybe go to some local VW meets and start chatting! Just the injectors were around $450. The whole ordeal, turbo, injectors, FMIC, pipe kit, tuning, and the oddball pieces here and there was probably around $3500-$4000, however you don't need to spend that much to make similar power. The turbo kit I went with was more on the expensive side. Darkside sells a cheaper kit with the same turbo for about half the price

Hey man great video and great car down there, i have an mk4 but atd engine 101hp, actually made an ecu remap and we'r almost at 150hp something less 330nm torque, and it already smoke almost like your but i have stock injectors, how do u manage with black smoke to avoid being like a carbon train in 2023? i would like to improve it bit more like 180hp more or less without loosing acceleration. any suggestion?

@GasHouseGarage

10 ай бұрын

Thank you! And welcome to the channel! We didn’t write the tune. But we do understand it somewhat. You could try reducing fueling at lower RPM’s with a little bit more boost without raising exhaust back pressure too much. This might clear up some smoke down low. Another thing to check is piping. There was a noticeable difference in smoke when we went with larger turbo inlet and outlet piping. The 90hp VE stock piping is very small though

@TheHalbhas

10 ай бұрын

Thanks alot i'll check it out, hope to see more mk4 videos in the future.@@GasHouseGarage

@GasHouseGarage

10 ай бұрын

Stay tuned!

Can you obd flash this ecu…? Good project

@GasHouseGarage

8 ай бұрын

Thank you! And yes you can. Only after 00’ I believe

@cristovaonunes4952

8 ай бұрын

@@GasHouseGarage but still have two eeproms right?

@GasHouseGarage

8 ай бұрын

I believe there is only one from the factory but is slotted for two if I’m not mistaken

Alt yazı Türkçe seçeneği yok Çok iyi iş çıkarmışsın tebrikler

@GasHouseGarage

Жыл бұрын

Thank you!

What is all done to the engine? This looks like perfect power to keep my trans alive in my alh ranger swap and still be peppy. How well has it held up?

@GasHouseGarage

6 ай бұрын

So far 30k miles and it’s still kickin. Biggest thing is to not bring in the power super early with the tune or lug the engine. It’s a diesel yes but it’s also a very small one designed for passenger cars. Basically just headstuds, GTB1756vk turbo, .280 injectors and some pipework

@csanderson1320

6 ай бұрын

My ranger only weighs 500 more than my 02 jetta. I may go with a ARL rotating assembly for peice of mind on the bottom end

@csanderson1320

6 ай бұрын

What psi is your boost cut?

@GasHouseGarage

5 ай бұрын

Roughly 30psi. That’s a about what the 1756VK is good to

Where did you get the bigger intake pipe at?

@GasHouseGarage

10 ай бұрын

Darkside developments has them. Email them the info on your car and what you’re looking for and they will steer you in the right direction

did the .28 affect idle and low rpm operation?

@GasHouseGarage

Жыл бұрын

Wouldn’t say so much low RPM operation but when it’s cold it does idle a little rough

hows the head gasket holding up? should i replace if im installing studs?

@GasHouseGarage

Жыл бұрын

So far so good! Ive always found it to be a good rule of thumb to replace the head gasket when doing head work though.

@JohnDoe-pf3ue

Жыл бұрын

@@GasHouseGarage yes exactly

What type of clutch was that? Who made it?

@GasHouseGarage

5 ай бұрын

We’re still running the stock clutch. Working on getting the new one in. The new one was built to spec by Kentucky Clutch. Give them a call and they can build one for you to whatever power level you want

@wafflesarecool1

5 ай бұрын

@@GasHouseGarage wow that is so crazy. You just solidified my decision! Those were the guys I emailed yesterday! I made a post on a Facebook group and they were recommended by a few people so I had already contacted them but I was just curious what your clutch was. People have said good things about them and the price is very good too

How do you find the solid mass flywheel over the dual mass?

@GasHouseGarage

8 ай бұрын

Hi there! We have not installed the single mass flywheel and upgraded clutch yet. We’re actually doing the suspension first as it needs some help. (Video coming soon) but one of our team members drives a TDI Jetta with a single mass and upgraded clutch. It feels just like the stock clutch

@c4r5on88

8 ай бұрын

@GasHouseGarage thank you my dual mass is bad so looks like I'll be doing the same. Nice work too those injectors definitely made a difference 👏

@GasHouseGarage

8 ай бұрын

Thank you for the support! Stay tuned!

How did it change your fuel mileage?

@GasHouseGarage

7 ай бұрын

Probably around a 2-4mpg improvement overall depending on Highway or city. That’s if you keep your foot out of it 😉

Bro I Hope You Get The R32 Front Bumper... It's Been 1year

@GasHouseGarage

Ай бұрын

Eventually. The clutch and limited slip are higher up on the to do list though

What version of mpps are you using?

@GasHouseGarage

8 ай бұрын

Welcome to the channel! We’re using MPPS V13.02

@dylanmorris2281

8 ай бұрын

@@GasHouseGarage thanks!

Your golf is manual obviously..which came with a 10mm head pump in the diesel injection pump...in the automatic golf mk4 ..they cane with an 11mm head pump..which will deliver more diesel to those injectors... Once timed correctly its a noticeable difference torque wise... And while your at it fire in an SDI camshaft..boom..get some bigger brakes first tho if I was you ..:)

@GasHouseGarage

6 ай бұрын

Got another 10mm laying around we might do some work to eventually and put 11mil internals in. Headwork is coming next 😎

Need bigger turbo

What u tune with

@GasHouseGarage

Жыл бұрын

Tune was written by a forum member. I don’t believe he has a website or anything. You can try searching “skaude tdi tuning” on Facebook, that’s his page

Was your ALH 90hp stock? I though only the AGR had 90hp

@GasHouseGarage

6 ай бұрын

Yes! The ALH is ~90HP as it comes from the factory

@jvinsnes

4 ай бұрын

@@GasHouseGarageWastegate turbo? in Norway ALH was always vane turbo 110hp and AGR WG 90hp

@GasHouseGarage

4 ай бұрын

@@jvinsnes yeah VNT15 turbo with variable geometry. Here they’re rated at 90hp

220 wheel hp? at the crank and should be very good

@GasHouseGarage

7 ай бұрын

The injectors and turbo are good for about 220 at the wheel. Torque limiter in the tune is probably bringing that down some but that’ll go away when we get the new clutch in

@Helder_Paulo

7 ай бұрын

@@GasHouseGarage in Portugal we do this setup for more than 10 years, an 1756vk or 2056vk can do max 230hp at crank. And still need exaust, fuel pump 12mm, front intercoller, new piping, map sensor 4bar or 6, fuel tank pump arl(pd150) to help to create more fuel pressure and a big tune for 220. And the new head bolts and gasget

@GasHouseGarage

7 ай бұрын

How high are you revving the 12mm pump? From my understanding they don’t take revs very well. If we can get 200 at the wheel on the dyno I’d be happy 😃

Info on the custom injectors ?

@GasHouseGarage

Жыл бұрын

Welcome to the channel! The injectors have full flow bodies and .280um 5 hole nozzles

@Smittyz1

Жыл бұрын

@@GasHouseGarage yea I meant where to get lol, I found the guy. Want to throw some in my UK imported a4 tdi 🤘🏻

@GasHouseGarage

Жыл бұрын

He does good work

Wait we can remove our maf? Is there a draw back?

@GasHouseGarage

Жыл бұрын

You can have a tune written based only on MAP values. If you do that you can run without a MAF. Ive heard the problem is the waffle structure in the MAF makes the air too turbulent on higher HP applications so the readings aren’t as accurate, but unsure of the validity on that

@wc4260

Жыл бұрын

@Gas House Garage didn't realize we could do this w our ecu. What software beyond vcds do you use? Btw not sure what your steering wheel situation is, but I searched for a 3 spoke mk4 wheel forever, ended up realizing u could use one from a 2012 and just wire it super simply. 2012 are much easier to find at the yards.

@GasHouseGarage

Жыл бұрын

We actually had someone write the tune for the car. From my understanding it’s more than just turning it off. I think some tables have to be re-written as well

makes a change to see americans work on diesels nice work

@GasHouseGarage

7 ай бұрын

Some of us over here love em! Got a diesel pickup we’re going to make some content on here soon. Stay tuned! Check out the short we have of it racing a G37x

5:15 3D print it

do u mind sharing the tune file?

@GasHouseGarage

Жыл бұрын

Hi there! For respect of our tuner, I cannot give you the file. Thank you for the support though! If you’re looking for a tune for your tdi, check out TekMekTronics on Facebook.

@atrabanefiltruota

Жыл бұрын

@@GasHouseGarage Thanks for the reply man, yeah, I understand your concerns but if you can't share the whole file, could you atleast share/make a video about 1 tiny part of it? More specifically, pump voltage table, that would be extremely helpful not only for me, but also everybody that is trying out your setup!

@GasHouseGarage

Жыл бұрын

I’ll see what I can do. I don’t have WinOLS though. VCDS gives some pump voltages but probably not what you’re looking for?

@atrabanefiltruota

Жыл бұрын

@@GasHouseGarage Yeah vcds wont cut it, easiest way to look at insides of the file would be vagecusuite :)

@GasHouseGarage

Жыл бұрын

We’re working on trying to write our own maps. We have 0 experience in that area though as a whole. We can do just about everything else though. Down the road we will definitely be writing our own tunes for things

Men more videos about this delicious

Where you located??? I wanna race

@GasHouseGarage

Жыл бұрын

NC! What cars do you have?

@GhostArmageddon

Жыл бұрын

​@Gas House Garage its taken 8 times to reply

@GhostArmageddon

Жыл бұрын

​@@GasHouseGarage 03 jetta alh wagon built to the max😅 wanting to get a alh diesel runs

@GasHouseGarage

Жыл бұрын

We should be back at the mooresville drag strip here this summer!

@GhostArmageddon

Жыл бұрын

@Gas House Garage might have to tow it from indy.

Asz/Arl swap it

@GasHouseGarage

8 ай бұрын

Hi there! Sadly, we never got those in the states.

@bradtyson

8 ай бұрын

@GasHouseGarage I know but aren't the blocks and heads about/easily accessible nowadays

@GasHouseGarage

8 ай бұрын

Likely, could probably get one imported. I know BEW blocks/heads are everywhere over here. I believe the block is either very similar or the same as the ALH. The rods are really the weakpoint in the VE engines (which we will be doing something about that here in the future 😎). But there are a lot of people making good power from these. I’ve seen a few at 350+whp on youtube

You lost me at the coal roll

@monsterram6617

7 ай бұрын

Diesels make black smoke... get over it.

Wait till he's a bit older, & gets a real motor B/Vairon A/Martin,,etc , all that power in his vw who needs the above,,,

Omg😂😂😂😂😂

I bet you still get 70mpg

@GasHouseGarage

7 ай бұрын

Not quite that high but it’s up there!

I'm using .280's, pd150 turbo (gt1749vb), 3bar map sensor and smf on the asv motor, runs at 180hp with 460nm torque Bigger turbo is deffo the next step but i recommend a fmic. I'm still using the factory side mount and it heat soaks real bad Watermeth and a bigger turbo is my next steps - i'd recommend you go bigger than the pd150 turbo for the size injectors you're using, that was a mistake i made

@GasHouseGarage

10 ай бұрын

Welcome to the channel! The FMIC is definitely a nice upgrade. We saw much lower charge air temps with it

@chrisleach7517

10 ай бұрын

@@GasHouseGarage ah i best look at your more recent videos to catch up then! 😆

Roll more coal!

Why are you running a maf? Delete that crap

@GasHouseGarage

8 ай бұрын

Tune is map only. The maf is there so we can bolt it to the airbox. That’ll be replaced with a pipe here in the near future 😎

@matthewlee2686

8 ай бұрын

@@GasHouseGarage just use a Dremel and cut the cones out. I've done a few like that