Installing 1/64 alloy wheels on a hot wheels car. Just like that.
Жүктеу.....
Пікірлер: 35
@ericmcginnis20975 жыл бұрын
I just subbed. You have some realy cool and informative content!
@rabfan
3 жыл бұрын
Thanks dude!
@1eurodiecastgarage7284 жыл бұрын
Bel lavoro! Well done
@gadgettvcars95555 жыл бұрын
Cool nice réalisation 👌 Peace ✌️
@lilgrey Жыл бұрын
thank you for this informative video! this helped me a lot! :)
@bandidodelcaminodiecast3 жыл бұрын
Very cool 👍
@rabfan
3 жыл бұрын
Thanks for the visit
@lashgoshotwheels11275 жыл бұрын
Nice
@dilanpremium2 жыл бұрын
Thank you!!!
@ivantuz63863 жыл бұрын
Useful. Thanks
@rabfan
3 жыл бұрын
Glad it was helpful!
@1lowsoul3 жыл бұрын
What is the aluminum spacer you used on the axle to space it off the chassis?
@rabfan
3 жыл бұрын
It is aluminum tubing from my local hobby store. 1/16" inner hole.
@jaredmagpali88952 жыл бұрын
Do you need to glue those end pins into the axles?
@royjames17424 жыл бұрын
What size are the axles that fit the brass tubing ?
@rabfan
3 жыл бұрын
Hot wheels axles. They are 1/16"
@jcsgaragejohnc.50274 жыл бұрын
Excellent video, May I ask where do you get your alloy wheels, TY
@rabfan
4 жыл бұрын
pandascustomdiecast.com has them if you’re in the US
@jcsgaragejohnc.5027
4 жыл бұрын
78Customs TY
@test_dude
4 жыл бұрын
@@rabfan and what about EU?
@rabfan
3 жыл бұрын
@@test_dude I'm not sure who the EU supplier is but they are available on eBay and that website I replied with will ship worldwide.
@aftmbeatz37565 жыл бұрын
Where did you buy the wheels?
@contrivational7470
5 жыл бұрын
go on ebay bro, search 64 wheels lowest price and postage worldwide, they are $4 usd for a set of 4
@penjjd_04595 жыл бұрын
My dilema on that wheel is to wiggling.?reply is much appriciated
@rabfan
4 жыл бұрын
Penjjd_ 04 sometimes the center bore is a little too large and the wheels wiggle a little. These are not going to win you races at the track
@kosmonparran4495
4 жыл бұрын
@@rabfan I'm guessing the tiny spacers you put in between the wheels and the main Axel might help to keep the wheels from wiggling as well as keep the wheels positioned where you want them under the wheel wells do they dont slide back towards the center of the chassis?? I'm looking to remedy the wobble myself
@rabfan
3 жыл бұрын
@@kosmonparran4495 you bet. Any stabilizing method will help. If you turn the inner cup around it also makes the contact patch on the axle wider in the wheel so that would also help with wiggling.
@ramapao694 жыл бұрын
what do you use to cut the axle if it's too long?
@rabfan
3 жыл бұрын
Dremel tool with a cut off wheel
@260chiles6 жыл бұрын
Where do you get those wheels, and how do you deep dish them? Love the video btw. Thanks
@rabfan
6 жыл бұрын
Rick M I sell them on Instagram. You can follow my feed @78_customs-> edit; 78diecast
@260chiles
6 жыл бұрын
rabfan all I see is shifters... for days. No wheels though.
Пікірлер: 35
I just subbed. You have some realy cool and informative content!
@rabfan
3 жыл бұрын
Thanks dude!
Bel lavoro! Well done
Cool nice réalisation 👌 Peace ✌️
thank you for this informative video! this helped me a lot! :)
Very cool 👍
@rabfan
3 жыл бұрын
Thanks for the visit
Nice
Thank you!!!
Useful. Thanks
@rabfan
3 жыл бұрын
Glad it was helpful!
What is the aluminum spacer you used on the axle to space it off the chassis?
@rabfan
3 жыл бұрын
It is aluminum tubing from my local hobby store. 1/16" inner hole.
Do you need to glue those end pins into the axles?
What size are the axles that fit the brass tubing ?
@rabfan
3 жыл бұрын
Hot wheels axles. They are 1/16"
Excellent video, May I ask where do you get your alloy wheels, TY
@rabfan
4 жыл бұрын
pandascustomdiecast.com has them if you’re in the US
@jcsgaragejohnc.5027
4 жыл бұрын
78Customs TY
@test_dude
4 жыл бұрын
@@rabfan and what about EU?
@rabfan
3 жыл бұрын
@@test_dude I'm not sure who the EU supplier is but they are available on eBay and that website I replied with will ship worldwide.
Where did you buy the wheels?
@contrivational7470
5 жыл бұрын
go on ebay bro, search 64 wheels lowest price and postage worldwide, they are $4 usd for a set of 4
My dilema on that wheel is to wiggling.?reply is much appriciated
@rabfan
4 жыл бұрын
Penjjd_ 04 sometimes the center bore is a little too large and the wheels wiggle a little. These are not going to win you races at the track
@kosmonparran4495
4 жыл бұрын
@@rabfan I'm guessing the tiny spacers you put in between the wheels and the main Axel might help to keep the wheels from wiggling as well as keep the wheels positioned where you want them under the wheel wells do they dont slide back towards the center of the chassis?? I'm looking to remedy the wobble myself
@rabfan
3 жыл бұрын
@@kosmonparran4495 you bet. Any stabilizing method will help. If you turn the inner cup around it also makes the contact patch on the axle wider in the wheel so that would also help with wiggling.
what do you use to cut the axle if it's too long?
@rabfan
3 жыл бұрын
Dremel tool with a cut off wheel
Where do you get those wheels, and how do you deep dish them? Love the video btw. Thanks
@rabfan
6 жыл бұрын
Rick M I sell them on Instagram. You can follow my feed @78_customs-> edit; 78diecast
@260chiles
6 жыл бұрын
rabfan all I see is shifters... for days. No wheels though.
@rabfan
6 жыл бұрын
Rick M oh sorry, that’s my other page. 78diecast
Donde compras tus ruedas
@rabfan
4 жыл бұрын
Sergio Noriega pandascustomdiecast.com