HELP! I can't decide on a color for the truck... the most commented color or the comment with the most likes is what I'll pick! UNLESS it's shit brown, hot pink, or some other horrible color you guys will troll me with.

@yaboichriss9148

5 жыл бұрын

Bright red

@jasoncampbell3132

5 жыл бұрын

The obs maroon

@zachmills9769

5 жыл бұрын

Gun metal grey metallic

@braaaaapp2464

5 жыл бұрын

I love this content

@Readmypost

5 жыл бұрын

Mystic teal its a fbody color from 1998 i belive

Paint shop is gonna be like "Cool dude you sanded it for us that actually helps us a lot, we'll take care of it no problem" *Mike leaves* "Sand again, sand EVERYTHING again"

@markusjenema5195

5 жыл бұрын

Aldo Lizalde my thoughts exactly lol

@shaggynscooby2981

5 жыл бұрын

what he thinks is smooth is probably ripples. Especially with that sander. If the body shop is not taking that truck to metal go somewhere else

@MLGtroll365

5 жыл бұрын

Damn took the words right out of my mouth 😂😂😂 he doesn't know. But just hopes he takes our advice and stops sanding

@brye9629

5 жыл бұрын

That's why I like this channel. I can tell when he's doing something wrong but respect him trying to learn and sending it.

@michaelm398

5 жыл бұрын

😂🤣

Dark navy blue “dark ming metallic” is the gm paint name

@STARSHIPTROOP

5 жыл бұрын

with silver rally stripes

@Squig-xi1fx

5 жыл бұрын

STARSHIPTROOP no

@chickensfloat7427

5 жыл бұрын

@@Squig-xi1fx no u

@squarebodyseth5986

5 жыл бұрын

IF HE DOESNT DO THIS IMA BE SO MAD

Bro love your show but please step back from the sander 🤣👊

@matthewcuny4996

5 жыл бұрын

I would agree.

@nathanwhite4340

5 жыл бұрын

Lol

@brianking9215

5 жыл бұрын

Was thinking the same, the guys at the shop were probably too...lol

@jamescurtisrussell

5 жыл бұрын

I work at a custom shop, and that's all I can think about...😂

@jakecummings9024

5 жыл бұрын

Literally just digging holes

I'm just here for the sanding comments. Was not disappointed 🤣🤣

@carstuff4u942

5 жыл бұрын

Haha!

@rustylugzz

5 жыл бұрын

Funny I almost wrote the same comment

How not to sand down a truck for paint 101

@gonzo5912

5 жыл бұрын

he is a phckin idiot,

@PaRaBeLLuMxXx

5 жыл бұрын

Lmfao

@ChillingCap

5 жыл бұрын

he didnt even take off the chrome fender flares

@ChillingCap

5 жыл бұрын

@@gonzo5912 yeah didnt even take off the fender flares

@gonzo5912

5 жыл бұрын

I know rite. not just the wheel trim, its most everything he does. @@ChillingCap

This hurts my eyes to watch you sand. Pay someone, please

@hardknox1917

5 жыл бұрын

I couldn’t watch , the level of hack was to much

@infernotogo8133

5 жыл бұрын

I thought it was just fine it gives him good content and if you're doing a cheap truck kind of thing it's much cheaper if you do that part yourself

@shaggynscooby2981

5 жыл бұрын

@@infernotogo8133Togo when you send shit into paint you get it out. trying to save him money. I would charge someone more if they sanded for me. Maybe that truck didn't need to go to metal ( it does) after he sands it probably would. more work more money

@colind9638

5 жыл бұрын

I get that Mike wants to contribute to the work, but just to jump in with a $30 palm sander without even taking off the chrome wheel arch trims is maybe not the best idea

@messylaura

5 жыл бұрын

same, i'm a panel beater and painter, i was hiding behind the sofa, we really do hate it when the owner 'got it paint ready'

You sand like a certified Maaco painter. 😂

@samuelstrickland3506

3 жыл бұрын

Maaco does better at sanding lol.

3m Eraser wheel would be your best friend for all that adhesive from the emblems and molding

The body shop is going to hack all that body filler out and start over with fresh metal anything other then that the rust will come back through your new paint job

@st1nkb0mber99

5 жыл бұрын

Unless they have better filler. It's an older truck so they might not go crazy unless specified by Mike.

@Joeshomegarage

5 жыл бұрын

MAACO! It looks good to me!

@jamescurtisrussell

5 жыл бұрын

They may use a more expensive filler, but it will not adhere propery. Mustang lab is correct, the RIGHT way to do it is down to bare metal, and work the metal to reduce the amount of filler

@bradpitt3810

5 жыл бұрын

Boosted GTO my 98 has a bright red maaco job. Looks very good for the price

@MikeGauley

5 жыл бұрын

Came to say the same.

DON'T MAKE ME PUT A LIFT KIT ON THE BRUCE...…….

@howtoandroid4399

5 жыл бұрын

What's up Steve

@StreetSpeed717

5 жыл бұрын

Hell yea dude! So you'll have an engine in it by 2023 and then a new lift kit by 2030?

@toybox5576

5 жыл бұрын

Let's be honest. Those are some pretty optimistic time goals.

@brandonpanozzo86

5 жыл бұрын

Lmao THATS A SECOND DEGREE BURN STEVE

@yami4781

5 жыл бұрын

How does it feel to text a married women @ Steve you fucking idiot

I’m getting the feeling that your “full restoration” is going to be just a dirty old truck 😂

@bryce8174

5 жыл бұрын

I'm afraid so

@13christbane

5 жыл бұрын

it's not even close to worthy for a resto. unless the body shop is going to work some miracles it's going to look like shit.

@ahack14

5 жыл бұрын

Mike G I have a feeling they are going to look at hm like he’s an idiot... then be like we can make this look ok for about a week. The if you want it done right we’ll have to cut all the rot out..

@tempo869

5 жыл бұрын

Sam Oh it should just be another off-road beater

@ahack14

5 жыл бұрын

Tomowenazin I’ve said it a thousand times this guy is a rich clueless wanna be cat guy. He doesn’t build a damn thing. I wouldn’t have my car where it is without a lot of help. However eat least the whole time I was out there turning wrenches and actually learning and working on the damn thing.

@Street Speed 717 take the fender Chrome pieces off

@dankinney6389

5 жыл бұрын

yes, please!

@memecrusader5840

3 жыл бұрын

Yes

If you are taking it to a real shop you are making their job harder! Just stop now.

@MLGtroll365

5 жыл бұрын

Lmao facts

@SurviventheOnslaught

5 жыл бұрын

maaco 300 paint job

@therealtrucker7564

5 жыл бұрын

Uploads video tomorrow “I plasti dipped my OBS Chevy truck in my driveway *Didn’t Go as Planned!*” and two months later “This is why you don’t do you’re own paint prep” 🤦🏻‍♂️

@BLACK05GO1

5 жыл бұрын

@@SurviventheOnslaught Even at Maaco they're going to charge a lot of money if Mike wants all that rust and body work done along with clear coated special color. I've had Maaco paint some new parts and damaged areas. They are not anywhere as cheap as people think (for a fully prepped clear coated paint job). But they are still a lot cheaper than a well known paint specialist shop. But some times you get what you paid for. I've had some bad experiences and good experiences with Maaco paint jobs.

@josefreefire4531

5 жыл бұрын

DrunkinHippo can u subscribe to my channel plz

That chrome finder trim be like... “why are you sanding me???”

Crazy... I’m sitting here watching this vid sitting on the tailgate of my 95 k2500 looking at my old water pump laying on the ground 😂

I’ve had more fun watching the content on 90s GM shitbox trucks than I ever did the mcclarens or vettes

@zanderwow

5 жыл бұрын

I second that!

@UnWrecked

5 жыл бұрын

If you love shit boxes, then you'd love my channel lol

Still no wheels and tires for the Jeep 😂💀

They flip the air cleaner for a little more flow, but it also gives it more intake noise, which just sounds better mostly.

I'm glad this content is being banged out quickly! Keep it up Mike!

Desert tan for sure. Green was done on the c4

100 bucks says it gets painted Chevy navy and this is a build to what he wishes he coulda done to the truck he had when he started the channel

@kingkinzers

5 жыл бұрын

1668Dave Exactly what I was thinking to

“This is like a... high grit...” I can feel Troy Sowers cringing. Lol

Body work is a damn gift brother. I did the bodywork on my 66 mustang, sand, Bondo, sand, Bondo X 20 more times, and after paint definitely imperfections here and there. My big problem was eventually down the road the rust pushed through and lifted parts of the paint near my door seals. It's a great learning experience but once the pros can take over it will be 👌

That poor Quad is begging to go for a Rip Mike..✊🏻

@josefreefire4531

5 жыл бұрын

Brian Mitsch can u subscribe to my channel

Go the original color of your first truck on your channel!!

@zacharymiller5690

5 жыл бұрын

AM Vlogs yes yes yes

Hurt me when you took off that metal band off the tailgate 😒

I really love these videos! Removing all the hideous stuff from the trucks, especially nice free mods like that are really satisfying 😂

Mike.... you gotta cut out the rust and do it right. It adds cost, but it's better to it right than do it twice.

@DYLANTRIES

5 жыл бұрын

AGREDD FRIEND

Turning the air filter top like that makes it sound better when you send it.

Mike, you need to replace the door pins on the door, it will close normally then

They got KZread videos to show you how to use a sander.

I think that ole Big10 Chevy orange style would look amazing behind the lift

you should get the eraser thing for your drill that ppl use to get rid of adhesive

@stevenbeene

5 жыл бұрын

Its called a rubber eraser wheel, and it works wonders for decals/vinyl/and adhesive

@George-nx4bp

5 жыл бұрын

Yeah, I just used the one that's like a third of the price of the 3M brand one and it worked great. That was about a week ago and I did fuck up on tearing the moulding off and now there's big chips of paint gone on my door

@thattrokguy9623

5 жыл бұрын

haha yea i would use one for my truck i have a 98 z71 and the that had it before me ripped off the stuff and didnt give a single fuck he just ripped it off and theres paint chips and all and its bad.....😂

When you purchased this truck I wondered why and was not enthused at all. After hearing all the plans for it, I am soooo EXCITED to see the future Videos of this truck. I never should've doubted you!!!! It depends if you want it Military paint or brighter. I think that bright ralley blue would be Sweet Looking!

Back in 87 Chevrolet introduced their new 1988 models. My roommate at the time bought an extended cab long bed. That sucker was like a stretch limo! Rode so smooth & handled well at 90 MPH on the freeway. This was in Texas- away from the Gulf & yet the truck was about a year old & GM replaced the roof because it was already rusting out. I'm sure they corrected that problem by 93. Can't wait to see the finished product.

Mike U already did a budget OBS build why not go full beans and restore it all the way and keep it for a little while

@13christbane

5 жыл бұрын

that truck is not at all worthy of a restore it's not even worthy of a budget paint job

@icu_corey_rn_903

5 жыл бұрын

Mike G still would be cool and different to see on the channel we all know he has the money to do it

Gotta be one of the best truck builders on you tube 🤙🤙

@ravensurge4024

5 жыл бұрын

Dylan Burgess agreed

@TheBigkal201

5 жыл бұрын

That’s a negative

@_Justinriceism_

5 жыл бұрын

Or nah.

@xRamRacing

5 жыл бұрын

Except he isn't a truck builder? He is a truck owner. He hasn't built anything

@savageboy2257

5 жыл бұрын

Are you serious..

Quite the project. Thanks for sharing guys!

Lmao I was crying laughing so hard when I saw how clueless you where when sanding but it's pretty dope that your putting yourself out there man

Ive been following this channel since mike got a 6 inch lift for the green obs

@StreetSpeed717

5 жыл бұрын

Same

@dukesjeepsandtrails8511

5 жыл бұрын

Question. I got my order from inshane design yesterday and it was only half my order. I understand they were super busy trying to fill orders. But how do I call them to get the other half of the order. It was only two black 12 inch tattered flag decals.

@Stax62

5 жыл бұрын

duke c you just pick up the phone and dial the number on their website, phones are pretty easy nowadays

@dukesjeepsandtrails8511

5 жыл бұрын

@@Stax62 didn't see it, but thanks

He has a 10in cognito his wife must be a very happy women

@JeffMiletich

5 жыл бұрын

Actually I thing that's what (in) Shane slipped (in) Mike at the glory hole...

I don’t usually laugh out loud during the vlog but the cut from Andy saying “nope” to you grinding under the truck had me rollin

super cool content lately great job

You should do the factory light blue on the truck

Some type of budget ........ Spends all of your money lol

I got an 88 k2500, with a manual trans that I'm bringing back to life. Flipping the lid does help a little.

Been waiting all day for a new video.

You could paint it nardo grey like you planed on doing to the dmax at one point.

@allspooledup2584

5 жыл бұрын

Everyone on KZread is painting everything nardo grey these days. Not very exciting after seeing it done 10 times already

@George-nx4bp

5 жыл бұрын

A nardo grey old ass truck? Interesting....

Had a missed call from a 717 number today I thought no way,called it back and sure as shit It was telemarketer

@blakeok952

5 жыл бұрын

Lol

You killed it man !

2 Andy’s and 2 Shane’s... what a time to be alive

These 90 model chevy trucks look soooo much better without that trim. Streamlined! Can’t wait to see the progress on this truck

NOTIFICATION GANG!!

I got A 94 GMC Sierra 1500 I can’t wait to see what you do with your truck I got a 6 inch lift on mine it looks good

Paint it the blue from the new raptord

@aaronfields57

5 жыл бұрын

Which blue... There's two

Paint the OBS shit brown. Great idea👍🏻

@marshakrebs4348

5 жыл бұрын

Dumb question probably heard it before but what does OBS mean thanks

@nolingatewood5182

5 жыл бұрын

Old body style

Being from Pittsburgh and knowing what kind of winters that trucks been threw and for how long....that lifts going to be a real dandy to do.

I have a 94 suburban and a 6in lift with 35s works good. Also they changed to the new style mirrors as well in 94

Love the budget builds!

@articat568

5 жыл бұрын

Don’t you have a bmw that needs paint? Lol

@that99obschevy91

3 жыл бұрын

V tuned you have got to do a obs build

@Vtuned

3 жыл бұрын

@@articat568 finally painted it last week

@Vtuned

3 жыл бұрын

@@that99obschevy91 yea one day

@articat568

3 жыл бұрын

@@Vtuned hell yea bro I appreciate the follow up, That’s dedication it’s been a whole year lol

The rough country lift is made in the good OL USA so that's a plus in my book

@bobby2k174

5 жыл бұрын

There shitty though.

@jacobboone6078

4 жыл бұрын

Yup, junk. Been there before with a 1998 Silverado. Whole truck is kind of a shity baseline honestly. Much better off with 99+

Im excited for this build because i have a 1998 k1500 obs and i want to lift it and get some steel offroad bumpers and paint mine ao what your doing is helping me out as a reference.

I have the rough country 6" on my 00 Yukon Denali, running a set of 35x12.50/17, no issues at all, Benn running it for over 2yrs

Mike: "Can you tune a 1993 Chevy Silverado" Andy: (without hesitation) NOPE. 😐 😯🤐

Do a military green wrap or make a flag wrap, having the stripes down the side of the truck. A really cool camo wrap would look great also!😁

So cool to see that many trucks in the yard 😂

Get a 3m eraser wheel for the side moulding residue and remove the chrome wheel arches!!!

Rubber wheel on a drill will take the adhesive of in a hurry.

That truck was a great find🔥👍😎. I bet your neighbors are curious why there’s always so many vehicles at your house 😂😂

@toybox5576

5 жыл бұрын

What happened to your videos? Sorta enjoyed the smaller KZreadr vibe.

@streetpreacher7176

5 жыл бұрын

ToyBox Car Club thank you I just subbed you !!! And I plan on making some more videos soon. I was so busy with work for the past few months that I didn’t have time to put out the kind of videos I wanted

@toybox5576

5 жыл бұрын

Thanks for the sub haha. I know I've seen that RS on your channel. I don't remember who's it was though. Will you be at the Carlisle Ford Nationals with it?

@streetpreacher7176

5 жыл бұрын

ToyBox Car Club it is @Get Famous Or Die Trying’s. RS, I’m not sure if he will bring it. Do you live in the area too

@toybox5576

5 жыл бұрын

I'm from below Pittsburgh. Right at seven springs

for the molding adhesive you want a 'toffee wheel' or stripe remover wheel, its a wheel of rubber that attaches to a drill and rubs off the adhesive, smells like toffee when it gets hot

Love the throaty sound of the 5.7 V8 on those older Chevy trucks.

Mike just let the professionals do the paint work, you are just making it harder for them! Lmao

Can you tune a 93 chevy Silverado- Andy : NOPE 😂😂😂😂😂😂

Can’t wait to see this build just recently got me a 94 z71

"I'm concerned, a not professional did this work" *has no clue what he's doing* lol

Rough country is made in Tennessee paint it with bed liner

rough country 😂😂😂 bad ass lift kit ya got there brother. all jokes aside love the content lately keep it up

I’m loving this build. I had two of these, a 91 single cab and a 95 extended cab. The 91 had a 355 open diff, slow as all get out but as reliable as the day is long. I don’t know if yours has the g80 rear, if it does be careful about doing burnouts lol. Mine locked up while doing a burnout in a parking lot and tore my ring gear to absolute shreds😂😂😂

Saw the picture on Instagram and had to come watch the video!!

He proteccc.... He attacccc... But most importantly...... HE LIFT THAT!!!

@robinhoodie8999

5 жыл бұрын

Carter Walton I actually chuckled at this not gonna lie

Not sure about the later models Mike, but on my 82 C10 I had that same issue with the doors. Check the strikers/pin that the door latch grabs onto, mine were missing a piece of plastic that goes around it. Either get new strikers with the plastic or cheap out like me and just put a piece of pipe around it. I used 1/2 PEX on mine, works great to this day.

Flipping the intake lid does work! Did that to my old quadrojet 305 IROC-Z and it really did pick up some power and seemed more responsive! 😁👌

@13christbane

5 жыл бұрын

like 3hp and some noise

@studdaman420

5 жыл бұрын

@@13christbane you could feel the difference in that 87 starved ass 305. Lol. It ran better with it flipped upside down. You are right about the noise too. I'd say maybe 4 and a half hp gain plus noise. Lol

CHARCOAL GREY!!!

You gotta love the 360p Pure quality

@Justinx310x

5 жыл бұрын

stop bitching about it. it was just uploaded. it takes time before it’s 1080p

@T0DDS

5 жыл бұрын

That's what happens when you first upload a youtube video. After a duration of time the real quality will be available.

@coltonroszmann9723

5 жыл бұрын

Jay I’m not bitching I’m just laughing I don’t care about the quality I like the content

@coltonroszmann9723

5 жыл бұрын

T Stack I know just saying

A lot of “pros” in here... people don’t realise this is a project something to learn on... not like your trying to paint a Ferrari lol. Love the vids and have fun :)

Your motivating me to restore my old pick up!

Chrome American forces or hostiles pleaseeeeee

WEAR A RESPIRATOR WHEN U SAND PLZZZZZZZ

Rino line the complete truck I did it to my 03 crew cab and it worked out great .... this way you dont have to worry about rough paint or bondo or anything like that.... and its scratch proof ... great for off roading

I got a 91 Chevy c1500 but mine is 2 wheel drive. I researched for my door panel (Which is destroyed) and it was about 450-500 dollars. The door shell itself is about 150ish. The door hangs and wobbles but it still runs great.

Big lifts are expensive especially with tires and wheels, steering crossover, re gearing etc. plus labor if you need it done for you. The 14” lift I want for my 7.3 with 40” Toyos and 22” wheels + labor since I can’t do it myself Is like $10k WITHOUT re gearing the axels. Gotta pay to play though💯

@NoHalfAss

5 жыл бұрын

Blazer is gonna look sick with that 6” lift man🔥

As long as she gets Black Wheels. Awesome video though. Gonna be sick 😊

"You had to pee, oh I'm sorry"🤣🤣🤣 you had me rollin

Prepped it myself! “SANDS DOWN TO METAL” Ready for paint 😂

Sorry but ... for me it is painful to watch ! me being a body man and watching someone doing bodywork, prep, but ...that's how you learn I guess Your just making more work for the. "other guys. Lol"

@blakeok952

5 жыл бұрын

What would you do ?

Paint it the same as the dirtymaxxxx

Can’t wait to see the lift on!

I like the tow mirror look better than the small mirrors. Especially since it's gonna be huge

Please do army green with like a black bedliner around the bottom part (where the silver is)

You should paint the truck nardo grey.