Dude great video! I have an 2008 ford explorer and my balancer failed then the pulley ate the crank shaft sensor leaving me stranded on the freeway. Hopefully the replacement job goes ok.

I'm dealing with the exact same issue on my 03 XLT right now. It made grooves in the rubber part of the harmonic balancer too!

Thanx for the video....Now I know what I need to do. I diagnosed the same failure on my 04 Explorer XLT today (8/20/23). My output pulley expanded back so far that it began rubbing a coolant hose that has some slow leakage at this point. I have to look for my old old fan clutch wrench from way back in the day, lol. I had never seen a failure like this before... serpentine belt being chewed up and riding off the output pulley. "If the women don't find you handsome, they should at least find you handy. Keep your stick on the ice."

Thank you you explain very well done

I just did this this job ended up being a bit of a nightmare. The puller bolts were to short and needed 8mmx1.25x100mm long. After installing the dorman harmonic balancer I started getting misfire codes P0300 P0303 p0304. I changed out the crank sensor and spark plugs. I ended up pulling the balancer back off and found that the pickup teeth for the sensor were bent on the new balancer. Make sure to check your new one before install. I just wanted to share this info for others.

I have a 2005 and last year my harmonic balancer shot off and hit the hood and something else and shot out from under my car like a photon torpedo first just spun there in front of the car and then it took off like 100 miles an hour down the block right in front of me and shot up into somebody’s bushes and the belt stayed on and I drove to the mechanic

THANKS FOR SHOWING HOW TO TAKE THE FAN OFF. EVERY VIDEO SKIPS THAT PART.

826-27 "That's a lovely, lovely voice..."(Bane voice) 🦇

Where did you get the parts and puller? I see harmonic balancers online, but none that come with the TTY Bolt or amything. Ive seen lots of reviews saying to avoid the Dorman brand because many have failed just after warranty period. Thanks for the video!

@stuiesgarage

Ай бұрын

It’s been a while since I did this repair but I want to say Rockauto, I get most of my parts from there.

Hey do I need a special tool to install the new harmonic balancer or did it just slide right on?

@stuiesgarage

4 ай бұрын

In the time lapse in the video I’m just tapping it on with a mallet, should slide on pretty easy, it did for me.