Ford 4.0L V6 Harmonic Balancer install
Автокөліктер мен көлік құралдары
Installing a Harmonic Balancer on a 2008 Ford Mustang V6.
Harbor Freight - Pittsburgh Bolt-type Wheel Puller Set was used in this video (Item 62620)
Use a 1/4" socket extension to pull off the Balancer.
Пікірлер: 41
I was changing my harmonic balancer with the help of your video, when 2 of my male neighbors decided they wanted to help, great......lol. I told them numerous times about needing a longer bolt because they weren't reaching the actual crank shaft (2:16 - 3:00) but I guess because I'm a female they refused to listen, so I let them fight it for a good while, lol. Finally I told them nevermind, to please just leave it alone, and the next day I went out and pulled it by myself lol. Thank you so much for your video !
@nicklldoit
20 күн бұрын
@@Lslade1224 Nice, slayed both of them. I had mechanics at their shops that couldn't get it done either.
Tremendous idea with the old serpentine belt to hold the balancer from rotating! Thank u have been trying to find ways to tighten down the balancer in the car without special tools.
i used a 4" extension on a puller kit borrowed from Advance Auto. Tried multiple times but it would not come off. The plate was thicker than the Harbor Freight one that I was using. Tried a 6' extension and it came right off. The screw down bolt was hitting the back of the harmonic balancer when using the 4' extension. Also could not get the new harmonic balancer on by tapping with a soft hammer. Tried with 1x4 a piece of wood to get even pressure and tapping on the face but still would not go on enough to catch the new bolt... Went to hardware store and bought 4" bolt same thread( cant remember pitch and thread. It's on the web somewhere) as new bolt and was able to draw it in enough to get the new bolt started. This video was very helpful as to what had to be done. One other thing. I took off the fan shroud to get a little more room. A couple of bolts and 1 wire clip. Place heavy cardboard , or something to protect the radiator fins while working
I've been going through Hell with this thing. Thank you!
@j.2391
Жыл бұрын
Np
Thanks you for the great video. Can 4.6 V8 crank pulley torque down same way using serpentine belt?
@nicklldoit
2 жыл бұрын
Yes, it's a universal cheat.
My 4.0L Ford engine is in my truck (not on an engine stand). I don't have an impact wrench. When I go to loosen the crank bolt (using a breaker bar), will I be able to use the belt to keep the engine from rotating counterclockwise? Please advise. Many thanks!
@nicklldoit
5 ай бұрын
Yes, it must be strapped on correctly to hold it tight.
what thread pitch bolt did you use? Don't have the same kit and I'm at a Toyota dealer so I don't have Ford's special tool... l don't think my kit has the correct bolts. Been driving myself crazy with this thing
@nicklldoit
2 жыл бұрын
I want to say it a 8mm fine thread, I'm not at home to check. It's a standard bolt in the Harbor Freight set- Pittsburgh Bolt-Type Wheel Puller set. Hope that helps. The bolt needs to be at least 3-1/2 inches long.
@johnwayne4219
Жыл бұрын
8mm by 1.25 thread pitch bolt
It would help me and boyfriend so much if we knew how long the two bolts for the Harmonic Balancer puller are in your video. We suspect our bolts are too short and the wrong thread. BTW I have a 2005 Ford Mustang 4.0 V-6.
@nicklldoit
Жыл бұрын
8mm fine thread bolt 3-1/2 inches long
@lisaannharris7341
Жыл бұрын
Hey Nick, we got the balancer off successfully thanks to you appreciate that very much. Now we need to take the timing chain cover off. Do you have a video on how it's done? Or can you give us some tips on what parts we have to remove to get to it. Thanks
@nicklldoit
Жыл бұрын
@@lisaannharris7341 kzread.info/dash/bejne/c6uY1JmNoaXFg5s.html FORDTECHMAKULOCO WILL HELP YOU ON THIS PROCESS
Just loosen the pulley bolt halfway out and then use the puller on top of the bolt head.
@nicklldoit
10 ай бұрын
Yes this does work well, some pulleys are really stuck on. Therefore the video shows a different way to avoid destroying any threads on the crank.
Is it a similar process for the explorer 4.0🤔?
@nicklldoit
2 жыл бұрын
Yes Sir
Hey I need to know where you got the front crank seal plastic cover?
@nicklldoit
2 ай бұрын
They come on new balancer, I don't believe you can buy them new separately.
11:24 that won’t damage the soft lateral washers on the crank?
@nicklldoit
Жыл бұрын
So what I'm doing is gentle, that is a lite soft mallet. I'm just pushing the balancer so that the bolt catches a couple of threads. It would take crazy force to damage anything internal.
My stepdad purchased one of these and the motor went so he had a new one put in. He called me over the other day to do some work and I saw the crank pulley was put on backwards and the grooved belt was running on the smooth part of the crank pulley not the ribbed part. Currently in the process of removing it to flip it and install it properly. A little worried tho to see the carnage and how the mechanic managed to put the crank pulley on backwards
@nicklldoit
Жыл бұрын
That's crazy! I've removed pulleys that have slipped off the damper and created new groves. They can be a pain to get off, hopefully in your case there is no damage to the crank snout or the bolt.
@charlesagro6678
7 ай бұрын
How could it be backwards? One piece on the 4.0 V8. Mine separated . The ribbed part separated from the pulley and moved back towards the engine leaving the smooth side in line with the other pulleys. Took me a while to figure out what happened.
@chaddelong6795
7 ай бұрын
@@charlesagro6678 his was the v6 model in which the pulley has 2 faces a smooth face and a grooved one. The shop that installed the motor put the pulley on backwards so it didn’t line up and kept knowing the belt off till he switched it around to the grooved side
You said you used a 1/4” Dr extension, how long of an extension?
@nicklldoit
11 ай бұрын
4-inch
What type and brand of grease did you put on the new harmonic balancer? I'm doing this procedure in a day or two and wanna make sure I don't miss a thing. Great video btw. Thank you for sharing
@nicklldoit
2 жыл бұрын
Valvoline synthetic general grease, any general grease will work
@4u2nv503
2 жыл бұрын
@@nicklldoit Thank you. One more question, did you remove the old key or left it in and installed the new harmonic on it?
@nicklldoit
2 жыл бұрын
@@4u2nv503 the key usually stays put on the crank shaft
@4u2nv503
2 жыл бұрын
@@nicklldoit Ok perfect. Again, thank Nick
Ford no longer sells the bolt. They even deleted the part number from their system
@nicklldoit
2 жыл бұрын
www.fordpartsgiant.com/parts/ford-bolt_-w712688-s430.html
$6 seal change it!
Video sucks u didn’t explain angry
@nicklldoit
2 жыл бұрын
Explain what exactly??