Thank you so so much!!! I bought a zx 10rr and thanks to your videos I am being able to do the mods! 👍💪😁

@NINJAof1

6 ай бұрын

Great to hear it's helping you. Be sure to check out the entire series at: kzread.info/head/PLzdClgclXkSN2j1d_FHIjUc9TsrZhP6U7 Leave a like. Thank you

@cesarsaurasilva6637

6 ай бұрын

@@NINJAof1 Can you please tell me where I can buy the book with the torque specs? Thank you

@NINJAof1

6 ай бұрын

@@cesarsaurasilva6637 You can buy the 22 Kawasaki ZX10R (RR) Service Manual at any Kawasaki Dealership. I paid $145.00 for mine. I have a detailed list of all the parts in the following video at time marker 9:32, which includes the service manual. kzread.info/dash/bejne/pZmt1LBwfZWcd6g.html Hope that helps.

@cesarsaurasilva6637

6 ай бұрын

@@NINJAof1 thanks

What exactly does the pair valve do? I see you blocked it off. Do you tell Moore Mafia that is done ?

@NINJAof1

Жыл бұрын

The PAIR valve has two plates connected together with hoses meeting at a "T" where it connects to a solenoid which regulates air intake from the bottom of the airbox to the headers. By mixing the fresh filtered air into the headers the motorcycle will meet EPA emissions as required. There's more about the subject online. Removing the PAIR valve and replacing with block-off plates has no effect in performance other than it's one of six performance/emission mods done to the bike (Air Intake Flapper removal, Pair Valve removal, Emission Canister and Associated Hose removal, BMC Race Air Filter install, CAT & Muffler removal/SC Project install). I provided Moore Mafia with a detailed list of the mods done to the bike and the necessary changes were flashed to the ECU. The detailed performance mods list is at the end of the video titled '(005) Remove ECU & Mail to Moore Mafia to be Flashed'. kzread.info/dash/bejne/n4il0bacqM_NXbw.html Hope that helps. Leave a Like. Thank you

@cantwheelie525

Жыл бұрын

@@NINJAof1 thank you for taking the time to explain it to me. You definitely know your way around a motorcycle. 🙌🏻

@NINJAof1

Жыл бұрын

@@cantwheelie525 You're welcome

Hi I am having a difficult time pulling the breather tube off of the fuel tank. Manual points to a joint connector lower in the hose but looks like you pulled it right off the tank. Did you just pull hard on it and it came off? It’s on there really tight

@NINJAof1

Жыл бұрын

The breather hose is on the right front underside of the tank as you sit on it. Just wanted to make sure we are on the same hose. Slide the clamp down and use a pick tool to separate the hose from the nozzle. Twist and pull. It can be a little finicky. Make sure the tank is supported and secure. The same for the overflow on the left side. Hope that helps. Let me know if you tried another technique.

@kupalisky3553

Жыл бұрын

@@NINJAof1 Thanks i’ll give that a shot! Yup same hose, oddly the one on the left side came right off for me. I’ll keep you updated

@kupalisky3553

Жыл бұрын

Got it off, similar technique just used a small flathead instead of a pick tool