They are pretty inexpensive here in Canada! I had a chinese 4000lb winch previously and after many uses the plantatary stripped in the middle of a long pull, it was very slow as well as the Champ seems to be. I had a Superwinch 4500 after that which was really nice, sold that, now on the hunt for value, used Superwinch\Warn or try another Chinese winch.
@calvinabbott6920 Жыл бұрын
The pressure caps over pressure the system with that seal not able to handle pressure, drill a hole in the cap to reduce pressure to save seal life.
@Idahoprepper71 Жыл бұрын
Good way to burn up a engine.
@imaslowlerner Жыл бұрын
Tractor Supply has them online in the USA 🇺🇸 for $69 shipped to your local store. Just ordered one.
@imaslowlerner Жыл бұрын
I was looking for all of the snow in the mountains. 😫
@aptorres01 Жыл бұрын
You can tell this guy doesn't know what he's talking about.
@cruzhernandez2216 Жыл бұрын
what were the exact motor mounts you used? the ones from energy suspension
@Anonymous-vr9hp Жыл бұрын
Is the oil seal that came out the one that you said Crack the case for. I have coolant in my oil
@jimmybrown788 Жыл бұрын
Be awesome if you had some paddles or deep tread tires in the back would get anywhere
@reesebarrett2880 Жыл бұрын
Hey where did you get the spring and how much tension is the spring rated for?
@gregd8381 Жыл бұрын
You didn't put the spring back in.
@cris_m8 Жыл бұрын
New seal has the spring with it.
@SterlingBall Жыл бұрын
Nice work, I'm in bc looking for a nv4500 and a few other Manuel parts. Who did you use I'm willing to pay for nice thing's 🙂
@SterlingBall Жыл бұрын
86 Cummings swaped Chevy
@dallasray27542 жыл бұрын
Where is this, this definitely looks like it would be a hell of a day
@futuregamer57912 жыл бұрын
Crappy design
@lapincretin26162 жыл бұрын
Are you sérious ? About one year for a vidéo ?
@DJ-kk3co2 жыл бұрын
😂😂
@dillbill45312 жыл бұрын
Hey buddy I’m kind of stuck on my power steering situation did you use the first or second GEN pump because I noticed the second GEN pump has three outlets and the first gentle only has two like a stock square body power steering pump would and did you have to have lines made to adapt to the Cummins pump to the Chevy steering box
@bootlegdiesel56222 жыл бұрын
You can use both pumps, if you use the 3 it just has 2 returns for hydro boost you can either block off the line or T your one return
@danielschwehr84142 жыл бұрын
Do you know how big of a body lift will clear the nv4500? I have a 2” level but not sure if that’s enough
@bootlegdiesel56222 жыл бұрын
You just need an inch, you’ll have more than enough with 2
@jsmcguireIII2 жыл бұрын
She's hang'n eh.
@ImaLoneWolfintheWoods2 жыл бұрын
Jesus it's 259.99 now in BC... inflation I guess....
@Yogurtstorm9 ай бұрын
Just grabbed one for 189 on special but yeah 259 regular price ouch
@lapincretin26162 жыл бұрын
Happy new year man !
@lapincretin26162 жыл бұрын
wake up, Bootleg
@DJ-kk3co2 жыл бұрын
What trans u got in er ?
@bootlegdiesel56222 жыл бұрын
Just a 5 speed getrag if you like this truck u should check out my mini square
@DJ-kk3co2 жыл бұрын
This is what I’ve been looking for 😂good shit man all the other vids barely even drive there truck
@bohemiansmile2 жыл бұрын
It's like the "Red Green Show". Damn, I wish I was Canadian! Thanks guy, I'm sold. :)
@rynok45472 жыл бұрын
No Canadian Whisky was harmed during the making of this film.
@gatsbyravens52432 жыл бұрын
What transmission are you using?
@lapincretin26162 жыл бұрын
186 abonnés ! Hurry up Bootleg !
@bootlegdiesel56222 жыл бұрын
What are we rushing haha
@jamesc69452 жыл бұрын
Lol just got one 60 bucks garage sale not even open. 🇨🇦 BC.
@bootlegdiesel56222 жыл бұрын
Haha it’s good winch, but watch the cable mine broke the 3rd time I used it
@mitchwilley50112 жыл бұрын
does the engine make a bunch of noise when this goes out? and also does the engine run bad at higher rpms?
@bootlegdiesel56222 жыл бұрын
Well it can if you run it without coolant but than you have a bigger issue with the motor. But if it’s just thing seal gone than no it won’t cause any of those issue
@kyleblack88202 жыл бұрын
When are you going to post anymore videos about the 2lt swap
@oh.no.shitboxs2 жыл бұрын
gotta start recording everthing u do to ur vechiles homie
@bootlegdiesel56222 жыл бұрын
Haha it’s hard and time consuming when it’s just me
@pricetag302 жыл бұрын
Nice trail buck!
@adamant71462 жыл бұрын
like the mckenzie brothers..."hey there hosers"
@falseempire29872 жыл бұрын
New 2021 Quad Hangar 😂😂😂
@lapincretin26162 жыл бұрын
And your wife is pround of this big blue old 1/2 truck in her gardent of course ?
@bootlegdiesel56222 жыл бұрын
Haha we just gonna tell her it’s lawn art
@tyclark37423 жыл бұрын
Awesome
@aydengarneri31243 жыл бұрын
Do you think you could do a video of how you put the 12v in the truck? And what tranny did you use?
@bootlegdiesel56223 жыл бұрын
I’m actually building another Cummins swap Chevy truck right now. If you go to my tiktok I made a quick video of it but I can sure make a video on KZread happen !!
@danielschwehr84142 жыл бұрын
@@bootlegdiesel5622 would also be very interested in a walk through of what all was done on this truck. Looking to do it on my 74 but don’t even know where to start
@bootlegdiesel56222 жыл бұрын
@@danielschwehr8414 this truck I’ve built 3 years ago, I’m just finishing my 4th Cummins swap now I’ll have a walk thru soon on it
@_AndromedaGalaxy_3 жыл бұрын
plot twist: this is the recovered video of some canucks that were abducted by aliens.
@marvincristiano44212 жыл бұрын
I dont mean to be so offtopic but does anyone know a trick to log back into an instagram account?? I was stupid lost my password. I appreciate any tricks you can give me
@ledgermaximiliano75582 жыл бұрын
@Marvin Cristiano instablaster ;)
@_AndromedaGalaxy_2 жыл бұрын
@@marvincristiano4421 dont know, i dont have one of those.
@marvincristiano44212 жыл бұрын
@Ledger Maximiliano i really appreciate your reply. I got to the site thru google and I'm trying it out now. Takes a while so I will reply here later with my results.
@marvincristiano44212 жыл бұрын
@Ledger Maximiliano it did the trick and I now got access to my account again. Im so happy! Thanks so much you saved my account!
@JohnnyDangerously17763 жыл бұрын
Great winch, EH!!!!!!
@thatsit51103 жыл бұрын
Need spacer in the front and it’ll look amazing
@slimpickens51023 жыл бұрын
Ha thanks. Just bought the Costco 3500 lb for 149.00 Hope it lasts.
@boostedbilly73083 жыл бұрын
A true dumb ass
@kevinhill6723 жыл бұрын
Looks like Triangle Beach...
@lapincretin26163 жыл бұрын
U imagination have no limit !
@Rx7man3 жыл бұрын
You're the Whistlin' diesel of lawnmowers now!
@ashfordcombs86583 жыл бұрын
Doesn’t the he351 have the solenoid hole I believe that’s an he341 compressor housing
@bootlegdiesel56223 жыл бұрын
The turbo I have here is an he351 but it’s an after market compressor housing, because this he351 is a 67-67-9
@elroyelblander6277 Жыл бұрын
Ashford is correct,I believe that is a 341 cover that has been modified by whichever aftermarket company.. doesn't matter...I think I've seen that fleece outfit slightly modify turbo's with common parts,slap some paint on it and then charge ridiculous price's....but anyway,I did something similar as u with a he351 ....👍👍👊
@thelongdaysofwheeling1243 жыл бұрын
Bob and Doug go wheeling.... only in Canada eh!
@caseysimon63576 ай бұрын
‘Eh’ is upper Canadian. 🤦♂️
@lapincretin26163 жыл бұрын
The turbo loves to run full and then, you stop the engine suddenly and the turbo continue to run dry ! Porr diesel turbo !
@bootlegdiesel56223 жыл бұрын
She’s a Cummins she can take any bullshit you throw at it bud
Пікірлер
Getting the outer seal out is an absolute bitch. Hats off to anyone that attempts this repair.
www.championpowerequipment.com/wp-content/uploads/2017/08/13050-om-english.pdf
They are pretty inexpensive here in Canada! I had a chinese 4000lb winch previously and after many uses the plantatary stripped in the middle of a long pull, it was very slow as well as the Champ seems to be. I had a Superwinch 4500 after that which was really nice, sold that, now on the hunt for value, used Superwinch\Warn or try another Chinese winch.
The pressure caps over pressure the system with that seal not able to handle pressure, drill a hole in the cap to reduce pressure to save seal life.
Good way to burn up a engine.
Tractor Supply has them online in the USA 🇺🇸 for $69 shipped to your local store. Just ordered one.
I was looking for all of the snow in the mountains. 😫
You can tell this guy doesn't know what he's talking about.
what were the exact motor mounts you used? the ones from energy suspension
Is the oil seal that came out the one that you said Crack the case for. I have coolant in my oil
Be awesome if you had some paddles or deep tread tires in the back would get anywhere
Hey where did you get the spring and how much tension is the spring rated for?
You didn't put the spring back in.
New seal has the spring with it.
Nice work, I'm in bc looking for a nv4500 and a few other Manuel parts. Who did you use I'm willing to pay for nice thing's 🙂
86 Cummings swaped Chevy
Where is this, this definitely looks like it would be a hell of a day
Crappy design
Are you sérious ? About one year for a vidéo ?
😂😂
Hey buddy I’m kind of stuck on my power steering situation did you use the first or second GEN pump because I noticed the second GEN pump has three outlets and the first gentle only has two like a stock square body power steering pump would and did you have to have lines made to adapt to the Cummins pump to the Chevy steering box
You can use both pumps, if you use the 3 it just has 2 returns for hydro boost you can either block off the line or T your one return
Do you know how big of a body lift will clear the nv4500? I have a 2” level but not sure if that’s enough
You just need an inch, you’ll have more than enough with 2
She's hang'n eh.
Jesus it's 259.99 now in BC... inflation I guess....
Just grabbed one for 189 on special but yeah 259 regular price ouch
Happy new year man !
wake up, Bootleg
What trans u got in er ?
Just a 5 speed getrag if you like this truck u should check out my mini square
This is what I’ve been looking for 😂good shit man all the other vids barely even drive there truck
It's like the "Red Green Show". Damn, I wish I was Canadian! Thanks guy, I'm sold. :)
No Canadian Whisky was harmed during the making of this film.
What transmission are you using?
186 abonnés ! Hurry up Bootleg !
What are we rushing haha
Lol just got one 60 bucks garage sale not even open. 🇨🇦 BC.
Haha it’s good winch, but watch the cable mine broke the 3rd time I used it
does the engine make a bunch of noise when this goes out? and also does the engine run bad at higher rpms?
Well it can if you run it without coolant but than you have a bigger issue with the motor. But if it’s just thing seal gone than no it won’t cause any of those issue
When are you going to post anymore videos about the 2lt swap
gotta start recording everthing u do to ur vechiles homie
Haha it’s hard and time consuming when it’s just me
Nice trail buck!
like the mckenzie brothers..."hey there hosers"
New 2021 Quad Hangar 😂😂😂
And your wife is pround of this big blue old 1/2 truck in her gardent of course ?
Haha we just gonna tell her it’s lawn art
Awesome
Do you think you could do a video of how you put the 12v in the truck? And what tranny did you use?
I’m actually building another Cummins swap Chevy truck right now. If you go to my tiktok I made a quick video of it but I can sure make a video on KZread happen !!
@@bootlegdiesel5622 would also be very interested in a walk through of what all was done on this truck. Looking to do it on my 74 but don’t even know where to start
@@danielschwehr8414 this truck I’ve built 3 years ago, I’m just finishing my 4th Cummins swap now I’ll have a walk thru soon on it
plot twist: this is the recovered video of some canucks that were abducted by aliens.
I dont mean to be so offtopic but does anyone know a trick to log back into an instagram account?? I was stupid lost my password. I appreciate any tricks you can give me
@Marvin Cristiano instablaster ;)
@@marvincristiano4421 dont know, i dont have one of those.
@Ledger Maximiliano i really appreciate your reply. I got to the site thru google and I'm trying it out now. Takes a while so I will reply here later with my results.
@Ledger Maximiliano it did the trick and I now got access to my account again. Im so happy! Thanks so much you saved my account!
Great winch, EH!!!!!!
Need spacer in the front and it’ll look amazing
Ha thanks. Just bought the Costco 3500 lb for 149.00 Hope it lasts.
A true dumb ass
Looks like Triangle Beach...
U imagination have no limit !
You're the Whistlin' diesel of lawnmowers now!
Doesn’t the he351 have the solenoid hole I believe that’s an he341 compressor housing
The turbo I have here is an he351 but it’s an after market compressor housing, because this he351 is a 67-67-9
Ashford is correct,I believe that is a 341 cover that has been modified by whichever aftermarket company.. doesn't matter...I think I've seen that fleece outfit slightly modify turbo's with common parts,slap some paint on it and then charge ridiculous price's....but anyway,I did something similar as u with a he351 ....👍👍👊
Bob and Doug go wheeling.... only in Canada eh!
‘Eh’ is upper Canadian. 🤦♂️
The turbo loves to run full and then, you stop the engine suddenly and the turbo continue to run dry ! Porr diesel turbo !
She’s a Cummins she can take any bullshit you throw at it bud