Can someone help me out? How do you dyno an all wheel drive car and have the front wheels strapped?
@Flat6Motorsports19 минут бұрын
@@henleygreen7599 the vehicles have a rolling test/dyno mode that puts the car into RWD and disables all of the AWD, traction and stability systems.
@garygriesel807 сағат бұрын
Thank you so much for the share, repaired ours on the weekend and it worked a treat ! Gary
@6172crew123 сағат бұрын
I have owned a few Ohlins products over the years, the TTX on my ducati soaks up the little stuff like it isn't there and the adjust ability make them great exceot they are not disposable like a regular shock and need to be rebuilt which is part of the game. That's cool you were able to take your T in to have it done by the pros. Did you ask them about servicing costs by chance? I also own a 992.1T, and it is a pretty stiff chassis, do you feel it mellowed the street ride out or just make the car handle better? Maybe I missed that part in the video but I'm at work with the volume down low.
@MrSportdiverКүн бұрын
Attention headphone users!!😂
@KoryoJKКүн бұрын
Also at 3:50, is that foam on top of the top hat for the rear? What kind of foam should I be adding and how do I apply it?
@Flat6MotorsportsКүн бұрын
That's part of the factory top hat.
@KoryoJKКүн бұрын
@@Flat6Motorsportsinteresting. It didn’t come with whatever’s on the top for me and I have the exact same Ohlins.
@Flat6MotorsportsКүн бұрын
@@KoryoJK the top mount is a factory/OEM part not an Ohlins part
@KoryoJKКүн бұрын
How many clicks counter clockwise from full stuff for: Street and Track front and rear? I have the same set of coilovers for my 992 S and it’s ridiculously compliant even at the stiff setting.
@Flat6MotorsportsКүн бұрын
You go all the way full stiff and then count each click backing out.
@KoryoJKКүн бұрын
What were your number of clicks on the street and track?
@Flat6MotorsportsКүн бұрын
@@KoryoJK 8 for the front and 6 in the rear
@KoryoJKКүн бұрын
@@Flat6Motorsportsinteresting that you set the rear to be more stiff. Did you do that for more oversteer?
@Flat6MotorsportsКүн бұрын
@@KoryoJK this is why we took the vehicle to their testing facility. The optimal balance is there. No oversteer detected but eliminated some of the front end push/understeer.
@ahdlebanon2 күн бұрын
🔥🔥🔥 Good job
@peterc76123 күн бұрын
Really nice video. I see that this Macan has the gray calipers. Can this brake rotors/pads set replace the PSCB's that typically come with the gray calipers on a 2021 Macan GTS without any issues?
@Ahaley977 күн бұрын
Do you guys have any further content on the Stage 4 tuned car?
@Flat6Motorsports7 күн бұрын
We did add the meth and tested with the Stage 4+ set-up. We have since picked up a manual Carrera T that we are doing testing with. More to come soon on that vehicle.
@slotkingdream7 күн бұрын
I have a 2013 Boxster S, and the screw is not there, or it's behind this rubber. I can't get to it..😫😩😫
@Marlon.Persaud10 күн бұрын
Need this!
@MidiaAdesperantista11 күн бұрын
qual o valor?
@hansgul892313 күн бұрын
625 hp my ass. 530 hp more likely.
@Flat6Motorsports10 күн бұрын
huh?
@user-tx6ez7tq8q14 күн бұрын
Thank you for very helpful video... Do I need to remove both rear wheels and replace 2 air cleaners? Or should I just do the right side?
@DavidF.Lambert14 күн бұрын
Stock clutch, is it really reliable with it? What fuels? E85 or is it possible with 93oct?
@Flat6Motorsports14 күн бұрын
Yes, stock PDK unit and clutch with tuning. 93 Octane. There isn't enough injector for E85.
@DavidF.Lambert14 күн бұрын
@@Flat6Motorsports@ Flat6Motorsports Impressive, hope we can swap the ECU soon. Cecio did it with the 991.5 models and the traction control management and rolling boos are impressive. Would love to see your kit vs there 900hp kit.
@dullestower877315 күн бұрын
Is there excessive chatter under the hood of the 2.9L Macan from the mechanical fuel pumps and/or injectors, that was evident in the 3.6L Macan? If so, what can be done to rectify the issue in both the 2.9L and 3.6L? i.e. is there a new and improved Porsche or aftermarket fuel pump?
@ryanmatthew51119 күн бұрын
It’s a good thing the transmission bushing looks so good 😂. 😊
@lebanese00019 күн бұрын
Is this stage 1 or stage 2 tuning?
@Flat6Motorsports19 күн бұрын
Stage 1, 2 is available for free with purchase
@lebanese00019 күн бұрын
@@Flat6Motorsports Thanks so on 992 S, you get close to 600HP with ECU tuning Stage 1?
@Flat6Motorsports19 күн бұрын
@@lebanese000 Yes, that is correct. Here are our power kits for reference: flat6motorsports.com/pages/992-carrera-power-kits-by-flat-6-motorsports
@esvignettes759220 күн бұрын
I deleted the mufflers on mine and only lasted two weeks with it. This motor drones like no other. Sounded nuts on shifts and was a blast to drive when on the highway or backroads but in the neighborhood I felt like a straight douche. Sad but I went back to stock 😣
@nafnaf020 күн бұрын
Can't wait to see what is possible with the new base 992.2 Carrera
@Flat6Motorsports20 күн бұрын
We have one on order!
@user-ok9gg9dp9b21 күн бұрын
Do you really have to take the cats off to slip the back box out?
@Flat6Motorsports21 күн бұрын
You don't have to but we find it easier/quicker than removing the rear bumper.
@victoro631021 күн бұрын
That's a straight pipe, is there one that's HIGH FLOW instead of completely removing all the catalytic functionality out? How does that affect the JB4 tune?
@Flat6Motorsports21 күн бұрын
Yes, available with a high flow catalyst: flat6motorsports.com/collections/macan-exhaust/products/mach-5-performance-downpipe-macan-2-0t?variant=30174062733
What’s max power tq will stage one 2017-2018 Mcan S make ?
@Flat6Motorsports21 күн бұрын
About 400-420HP, 450 TQ
@5355Tank21 күн бұрын
Will y0ou get the same results with a S as you did with the GTS or Turbo?
@dangerhighvoltages23 күн бұрын
Does this require a PDK tune or clutch upgrade?
@Flat6Motorsports23 күн бұрын
No, currently there are no solutions there.
@Dtp229624 күн бұрын
Why is the ramp on the floor to take the wheels off?
@robertgregory192726 күн бұрын
I like the option.
@bimmerlife545228 күн бұрын
I just bought one today of I love it I’m getting mufflers cut off tomorrow with some new black trips with cobb stage one plus 🤌
@takyritorrey243629 күн бұрын
Great, would it help if we spray some rust brake cleaner?
@Flat6Motorsports29 күн бұрын
It's not needed unless there is rust.
@user-ok9gg9dp9b29 күн бұрын
Are you comparing the Akra to upgraded PSE?
@Flat6Motorsports29 күн бұрын
We try to draw the comparison to the stock PSE system.
@rosscarver454629 күн бұрын
What are the bolt ons?
@Flat6Motorsports29 күн бұрын
This car pretty much has full bolt-ons (intercooler, 200 cell link pipes, muffler, do88 inlets, S/GTS turbos)
@Andycrouppen29 күн бұрын
Does this car have the PSE? I am ordering a car and trying to figure out of I need the PSE in order to close the valves or if that can be accomplished by choosing normal driving mode instead of sport. Thanks for your help.
@Flat6Motorsports29 күн бұрын
This car does but you don't need PSE. It can be coded into the car or you can use a Cargraphic Valve Controller.
@335i101Ай бұрын
Does it work on 992?
@Flat6MotorsportsАй бұрын
See this one: flat6motorsports.com/products/flat-6-motorsports-jack-pad-adapter-992
@335i101Ай бұрын
@@Flat6Motorsports Ordered
@iancampbell8913Ай бұрын
It’s a safety feature that’s why it has a button on the boot lid.again messing with science 😢
@a-sword417Ай бұрын
My 992 Turbo S Stage 4 is a rocket 🚀… thank you.
@dullestower8773Ай бұрын
What did the increase in power result in with respect to fuel economy?
@timothyfradenburgАй бұрын
Arse end looks like a Toyota on the 2nd gen.
@jackcarr2763Ай бұрын
Does this work the same with Turbo S - 2024
@Flat6MotorsportsАй бұрын
Yes, absolutely!
@aurasystemsАй бұрын
What about lower control arms?
@b123bАй бұрын
Don’t need to write old stock files to keep in the computer?
@Flat6MotorsportsАй бұрын
The uninstall file is the stock file, it will come in the email with the tuned file.
@mdowney14Ай бұрын
Do you know if this kit is California emissions compliant (smog)?
4 bolt fix. NOT just 2. The driver side one next to air box (shown here) and the passenger side under the PCV valve hose (NOT shown here) are the tough ones. The reason why the 2 bolt fix sometimes doesn’t work is there’s another 2 that shears easily. And another opportunity for the dealer to pull engine.
@sbryann18Ай бұрын
Is there any way to visually tell if a turbo s has upgraded turbos? Assuming only way is you need to remove panels to check.
@Flat6MotorsportsАй бұрын
The easiest way would be to remove one of the inlets and inspect the turbine wheel.
@mikeemikee1610Ай бұрын
What did this run? How much was this job? I’m trying to get a 996 at this point it’s all 110k+ miles. So to do something like this what does it run?
@Flat6MotorsportsАй бұрын
You can expect to spend around $25-30K.
@carmenb2920Ай бұрын
Did you have someone else install the wiring?
@Flat6MotorsportsАй бұрын
This client was using for just a bike rack so didn’t want wiring.
Пікірлер
Can someone help me out? How do you dyno an all wheel drive car and have the front wheels strapped?
@@henleygreen7599 the vehicles have a rolling test/dyno mode that puts the car into RWD and disables all of the AWD, traction and stability systems.
Thank you so much for the share, repaired ours on the weekend and it worked a treat ! Gary
I have owned a few Ohlins products over the years, the TTX on my ducati soaks up the little stuff like it isn't there and the adjust ability make them great exceot they are not disposable like a regular shock and need to be rebuilt which is part of the game. That's cool you were able to take your T in to have it done by the pros. Did you ask them about servicing costs by chance? I also own a 992.1T, and it is a pretty stiff chassis, do you feel it mellowed the street ride out or just make the car handle better? Maybe I missed that part in the video but I'm at work with the volume down low.
Attention headphone users!!😂
Also at 3:50, is that foam on top of the top hat for the rear? What kind of foam should I be adding and how do I apply it?
That's part of the factory top hat.
@@Flat6Motorsportsinteresting. It didn’t come with whatever’s on the top for me and I have the exact same Ohlins.
@@KoryoJK the top mount is a factory/OEM part not an Ohlins part
How many clicks counter clockwise from full stuff for: Street and Track front and rear? I have the same set of coilovers for my 992 S and it’s ridiculously compliant even at the stiff setting.
You go all the way full stiff and then count each click backing out.
What were your number of clicks on the street and track?
@@KoryoJK 8 for the front and 6 in the rear
@@Flat6Motorsportsinteresting that you set the rear to be more stiff. Did you do that for more oversteer?
@@KoryoJK this is why we took the vehicle to their testing facility. The optimal balance is there. No oversteer detected but eliminated some of the front end push/understeer.
🔥🔥🔥 Good job
Really nice video. I see that this Macan has the gray calipers. Can this brake rotors/pads set replace the PSCB's that typically come with the gray calipers on a 2021 Macan GTS without any issues?
Do you guys have any further content on the Stage 4 tuned car?
We did add the meth and tested with the Stage 4+ set-up. We have since picked up a manual Carrera T that we are doing testing with. More to come soon on that vehicle.
I have a 2013 Boxster S, and the screw is not there, or it's behind this rubber. I can't get to it..😫😩😫
Need this!
qual o valor?
625 hp my ass. 530 hp more likely.
huh?
Thank you for very helpful video... Do I need to remove both rear wheels and replace 2 air cleaners? Or should I just do the right side?
Stock clutch, is it really reliable with it? What fuels? E85 or is it possible with 93oct?
Yes, stock PDK unit and clutch with tuning. 93 Octane. There isn't enough injector for E85.
@@Flat6Motorsports@ Flat6Motorsports Impressive, hope we can swap the ECU soon. Cecio did it with the 991.5 models and the traction control management and rolling boos are impressive. Would love to see your kit vs there 900hp kit.
Is there excessive chatter under the hood of the 2.9L Macan from the mechanical fuel pumps and/or injectors, that was evident in the 3.6L Macan? If so, what can be done to rectify the issue in both the 2.9L and 3.6L? i.e. is there a new and improved Porsche or aftermarket fuel pump?
It’s a good thing the transmission bushing looks so good 😂. 😊
Is this stage 1 or stage 2 tuning?
Stage 1, 2 is available for free with purchase
@@Flat6Motorsports Thanks so on 992 S, you get close to 600HP with ECU tuning Stage 1?
@@lebanese000 Yes, that is correct. Here are our power kits for reference: flat6motorsports.com/pages/992-carrera-power-kits-by-flat-6-motorsports
I deleted the mufflers on mine and only lasted two weeks with it. This motor drones like no other. Sounded nuts on shifts and was a blast to drive when on the highway or backroads but in the neighborhood I felt like a straight douche. Sad but I went back to stock 😣
Can't wait to see what is possible with the new base 992.2 Carrera
We have one on order!
Do you really have to take the cats off to slip the back box out?
You don't have to but we find it easier/quicker than removing the rear bumper.
That's a straight pipe, is there one that's HIGH FLOW instead of completely removing all the catalytic functionality out? How does that affect the JB4 tune?
Yes, available with a high flow catalyst: flat6motorsports.com/collections/macan-exhaust/products/mach-5-performance-downpipe-macan-2-0t?variant=30174062733
How to keep the Exhuast Valve open all time
valve simulators flat6motorsports.com/products/awe-tuning-electronic-valve-simulator-macan?_pos=132&_sid=30d1697a1&_ss=r
What’s max power tq will stage one 2017-2018 Mcan S make ?
About 400-420HP, 450 TQ
Will y0ou get the same results with a S as you did with the GTS or Turbo?
Does this require a PDK tune or clutch upgrade?
No, currently there are no solutions there.
Why is the ramp on the floor to take the wheels off?
I like the option.
I just bought one today of I love it I’m getting mufflers cut off tomorrow with some new black trips with cobb stage one plus 🤌
Great, would it help if we spray some rust brake cleaner?
It's not needed unless there is rust.
Are you comparing the Akra to upgraded PSE?
We try to draw the comparison to the stock PSE system.
What are the bolt ons?
This car pretty much has full bolt-ons (intercooler, 200 cell link pipes, muffler, do88 inlets, S/GTS turbos)
Does this car have the PSE? I am ordering a car and trying to figure out of I need the PSE in order to close the valves or if that can be accomplished by choosing normal driving mode instead of sport. Thanks for your help.
This car does but you don't need PSE. It can be coded into the car or you can use a Cargraphic Valve Controller.
Does it work on 992?
See this one: flat6motorsports.com/products/flat-6-motorsports-jack-pad-adapter-992
@@Flat6Motorsports Ordered
It’s a safety feature that’s why it has a button on the boot lid.again messing with science 😢
My 992 Turbo S Stage 4 is a rocket 🚀… thank you.
What did the increase in power result in with respect to fuel economy?
Arse end looks like a Toyota on the 2nd gen.
Does this work the same with Turbo S - 2024
Yes, absolutely!
What about lower control arms?
Don’t need to write old stock files to keep in the computer?
The uninstall file is the stock file, it will come in the email with the tuned file.
Do you know if this kit is California emissions compliant (smog)?
No downforce 😂
How much this thing cost for 2023 porsche turbo S
flat6motorsports.com/collections/992-ecu-tuning/products/m-engineering-m-tuner-suite-ecu-tuning-992-turbo
Do you have a vid for the 997.1 turbo?
What’s the point of installing one?
4 bolt fix. NOT just 2. The driver side one next to air box (shown here) and the passenger side under the PCV valve hose (NOT shown here) are the tough ones. The reason why the 2 bolt fix sometimes doesn’t work is there’s another 2 that shears easily. And another opportunity for the dealer to pull engine.
Is there any way to visually tell if a turbo s has upgraded turbos? Assuming only way is you need to remove panels to check.
The easiest way would be to remove one of the inlets and inspect the turbine wheel.
What did this run? How much was this job? I’m trying to get a 996 at this point it’s all 110k+ miles. So to do something like this what does it run?
You can expect to spend around $25-30K.
Did you have someone else install the wiring?
This client was using for just a bike rack so didn’t want wiring.