Can I ask where you found the pattern for the helmet?
@anarkeeАй бұрын
THANK YOU
@Capitaine-Rex2 ай бұрын
This would be really good if you can do a roman helmet like that we have the spartan and the roman helmet, the most known helmet. Also it’s a great video
@letsmakegeekstuff47992 ай бұрын
Thanks for the recommendation. I hope to come out with some new patterns soon!
@Capitaine-Rex2 ай бұрын
@@letsmakegeekstuff4799 all the pleasure is to me i hope you will make it
@Cleovalentine662 ай бұрын
This was so helpful thank you ❤❤
@letsmakegeekstuff47992 ай бұрын
I'm so glad. Thanks for the comment!
@mlang16582 ай бұрын
This is the way.
@user-qe8yz9hu3t4 ай бұрын
Hi i am from quito ecuador como puedo conseguir los moldes please
@tonyfancello53225 ай бұрын
Fantastico si potrebbe avere il disegno per poterlo realizzare. Grazie mille. Bravissima.
@BullDeerAryu_5 ай бұрын
Anyone else struggling with their bracers? Mine feel like they’re suffocating my arms. My hand wearing the bracer starts twitching and I’m getting frustrated
@letsmakegeekstuff47995 ай бұрын
EVA against bare skin can indeed be sweaty and hot! You can hot glue in a felt lining to help with this.
@BlueShellKoopa6 ай бұрын
I think 's might the helmet of Themistocles of athens
@chandlersnyder3086 ай бұрын
I got a challenge for you can you make the helmet, shield and armor of Achilles from Troy
@kyranb27077 ай бұрын
how do you find the measurement of the pattern? Like you said it is a bit confusing.
@letsmakegeekstuff47997 ай бұрын
Hi! Most of my patterns will give at least one completed measurement in the instruction section of the pattern. I try to give the measurement I think will be most helpful for sizing correctly.
@glydelkarlstad35698 ай бұрын
hi what about the size of the other body parts like the arms and chest area for making a breastplate for example?
@letsmakegeekstuff47998 ай бұрын
If you are given a size of a completed item, like the length of a bracer, or the width of a chestplate, then you can use this calculation. Measure yourself to find out how long you'd like that measurement to be on your completed item, and do the calculation. Do keep in mind that this only scales the entire item, it won't make something thinner, or wider for example.
@oscarlopez83078 ай бұрын
Well how is this have 60 likes this is amazing
@markvo31378 ай бұрын
wouId 1mm eva foam work for gIuing veIcro onto?
@letsmakegeekstuff47998 ай бұрын
Most velcro will be stronger than 1mm foam. So some options: find very weak velcro, use only a very small amount of velcro, or always make point of unfastening by pulling directly on the velcro itself and not on the foam.
@markvo31378 ай бұрын
@@letsmakegeekstuff4799 how thick shouId the inner foam be then?
@letsmakegeekstuff47998 ай бұрын
oic. Yes, for the underfoam you could do a thinner foam, just be sure when you are opening it that you pull apart the velcro rather than pulling the foam itself. @@markvo3137
@markvo31378 ай бұрын
@@letsmakegeekstuff4799 so then 1mm is fine then or 2 or more? also how do i know when to stop heating my foam? shouId i scaIe my bracers to be a bit wider for the inner foam and veIcro?
@markvo31378 ай бұрын
ok so i figured there's a difference between craft and eva foam, hobby Iobby has 2mm and 5mm, which one shouId i use?
@johnwilson56628 ай бұрын
Do u have plans
@letsmakegeekstuff47998 ай бұрын
I didn’t make plans. He’s a one of a kind.
@Jli2-x9l8 ай бұрын
If I want to lengthen just the circumference piece for my helmet, can I just lengthen that piece Or do I have to largeness all pieces of the helmet.
@letsmakegeekstuff47998 ай бұрын
This method enlarges the entire pattern. If you want to change just one aspect you’ll have to do that by hand and it will require you to make changes to the entire pattern.
@nick60618 ай бұрын
How do you get the accurate measurements
@letsmakegeekstuff47998 ай бұрын
In the pattern there are instructions on how to size.
@D3DBATZ_Art8 ай бұрын
I’ve made a small model of what I wanna make so I have to upscale on pc. This was very helpful
@missy48048 ай бұрын
I'm really inspired to build this.
@arliden206410 ай бұрын
Will the metal rip the foam over time?
@letsmakegeekstuff47998 ай бұрын
Thinner foam can be torn over time, but I have done the grommets/eyelets in 5mm foam and used bracers for years without any problem. I think one key is designing it in such a way that there is not a lot of stress on just a few eyelets. If you have a long line of them, it evens out the pull on each individual.
@notpadme11 ай бұрын
would you ever sell these and not just the templates?
@patrickmckowen299911 ай бұрын
👍
@patrickmckowen299911 ай бұрын
AWESOME 👍
@enersolelectrical7664 Жыл бұрын
awesome stuff thank u so much
@jiroakakman8855 Жыл бұрын
Would a 10mm work?
@letsmakegeekstuff4799 Жыл бұрын
Yes. It would give a thick and solid look. It would also fit a bit tighter than the thinner thickness of foam.
@marcusgreene7001 Жыл бұрын
Cool but what did you do for paint
@dangi2034 Жыл бұрын
This is exactly what i needed, thanks!
@karembenzema1546 Жыл бұрын
Gaye yang telah dilakukan sejak ❤👍👍👍🤝
@kingnation1986 Жыл бұрын
Awesome work
@cherokeequeen9981 Жыл бұрын
I love your design. It's the closest to the Bo Katan on screen. It will go really well with my husbands Mando cosplay. He actually subscribed to your channel last night after watching your video. his KZread channel is KIngNation86.
@jasononeal Жыл бұрын
Great walk through and excellent build!
@watercolorhomie146 Жыл бұрын
I love you your work im new to cosplay making. I find your videos easy to follow grade level instructions for those of us that need to rewatch 😅 for clarification 😊
@watercolorhomie146 Жыл бұрын
😢 omg the emotions of the reveal. Super, Uber ultra cool. I think it's Beautiful looks amazing I'm pretty sure the camera does not give it its full honor. Thank you for sharing 🎉
@nanabanana3503 Жыл бұрын
I want to cosplay as din djarin but I need to use a female chestplate would this be a good substitute? It looks very similar
@letsmakegeekstuff4799 Жыл бұрын
That's up to you! Depending on the look you want you could make some changes to this base pattern to make it more Din Djarin shaped.
@id744 Жыл бұрын
Are you planning on templates for the additional armor pieces?
@letsmakegeekstuff4799 Жыл бұрын
I’m working on the shin and knee armor pattern now!
@id744 Жыл бұрын
@@letsmakegeekstuff4799 Fantastic! My 13yro would like to make an entire Bo Katan set and I'd prefer all or most be from the same designer. Thanks
@martysimmonsen4501 Жыл бұрын
Great pattern along with a super video. I am 68 an made one for my 6 yr. old granddaughter and she was over the moon. I think if I can do it anyone can.
@letsmakegeekstuff4799 Жыл бұрын
So glad to hear it! You sound like an awesome grandparent!
@hauntedcaptainphoenix5363 Жыл бұрын
Hello I'm making a pumpkin man for Halloween how should I put orange color on the foam floor matts I'm using.
@letsmakegeekstuff4799 Жыл бұрын
Check out my video on painting 101. You should be able to paint your EVA foam to look orange, no problem. kzread.info/dash/bejne/q5yF2seymM_bfto.html
@hawaiianhunny250607 Жыл бұрын
You are my savior!!!! Thank you so much!!!!
@starwarsandy4483 Жыл бұрын
I love it👍🙂
@sithmasterseb Жыл бұрын
This is very helpful!
@carlpowers7291 Жыл бұрын
That’s really awesome. I just wish that I could be as quick as the videos themselves. Well done though well done!
@Lionloverky Жыл бұрын
I think you might be the only one with this issue
@3Designer_col Жыл бұрын
Very good tutorial video, I hope you make other similar ones, for example, the Robocop helmet or Judge Dredd. Thanks
@letsmakegeekstuff4799 Жыл бұрын
I love your ideas! Thanks for watching.
@LincolnJoseph-rc4yl Жыл бұрын
Can you tell me the measurements of the dome….. what is the measurement of the petals for the dome ??
@LincolnJoseph-rc4yl Жыл бұрын
Can you tell me the measurements of the dome….. what is the measurement of the petals for the dome ??
@letsmakegeekstuff4799 Жыл бұрын
The approximate inside circumference of this helmet when printed at 100% is 60cm. The measure from the top corner of the eye hole to the tip of the side piece is 17cm. There are instructions on how to resize the helmet in the pattern. You can also watch my youtube vid "how to resize digital patterns" which walks you through the printing settings to make adjustments.
@Vlairyn-Three Жыл бұрын
My printer paper won’t print on the scale I need 😭
@letsmakegeekstuff4799 Жыл бұрын
You can take the file to most copy stores and have them print on larger paper.
@D3DBATZ_Art8 ай бұрын
There’s an print option where you can make it print across multiple pages then you have to stick it together
@mutzel0780 Жыл бұрын
This tutorial is soo great!!! 🙌 Does it also work with 5 mm Eva foam? 😅
@letsmakegeekstuff4799 Жыл бұрын
Perhaps if the foam was on the dense side??? I would be concerned that 5mm would not hold shape and would not take on the smooth curves required.
@mutzel0780 Жыл бұрын
@@letsmakegeekstuff4799 Yeah, thank you. I'll look if I can buy some floor Matt foam.
@stormminx1085 Жыл бұрын
you are a life saver, building my mando and one part had remake few times is the boobs as didn't want to normal cup looking plates and liked Bo Katan chest plate better. You are a saint!
@letsmakegeekstuff4799 Жыл бұрын
Glad you found this useful! I know female mando chest armor can be a challenge!
@davidrose8920 Жыл бұрын
is this a copy of the template that was created by surfer dave 2 years ago?
@letsmakegeekstuff4799 Жыл бұрын
I design all my own patterns specifically for EVA foam. You can see my patterns and read my progress blog on my website letsmakegeekstuff.weebly.com/
@davidrose8920 Жыл бұрын
@@letsmakegeekstuff4799I only asked as your template looks almost identical (the T part section you stick the outer armour to is a bit more curved on yours) to the one I have from surfer dave on etsy, and I know he free hands all his templates
@letsmakegeekstuff4799 Жыл бұрын
@@davidrose8920 it makes sense to me that two creators patterning the same piece would come up with very similar patterns. It shows that we are both good at what we do. As you look at my website and history in this space I’m sure it will give you confidence that I’m not just out here stealing other people’s work.
@davidrose8920 Жыл бұрын
@@letsmakegeekstuff4799 I agree the finished piece would look very similar, as a maker my self with over 20 years experience in this area, its the way you get there that I would not expect to be similar, as we all have our own ways. 'Dave' has been creating within the mando space for over 15 years
Пікірлер
Can I ask where you found the pattern for the helmet?
THANK YOU
This would be really good if you can do a roman helmet like that we have the spartan and the roman helmet, the most known helmet. Also it’s a great video
Thanks for the recommendation. I hope to come out with some new patterns soon!
@@letsmakegeekstuff4799 all the pleasure is to me i hope you will make it
This was so helpful thank you ❤❤
I'm so glad. Thanks for the comment!
This is the way.
Hi i am from quito ecuador como puedo conseguir los moldes please
Fantastico si potrebbe avere il disegno per poterlo realizzare. Grazie mille. Bravissima.
Anyone else struggling with their bracers? Mine feel like they’re suffocating my arms. My hand wearing the bracer starts twitching and I’m getting frustrated
EVA against bare skin can indeed be sweaty and hot! You can hot glue in a felt lining to help with this.
I think 's might the helmet of Themistocles of athens
I got a challenge for you can you make the helmet, shield and armor of Achilles from Troy
how do you find the measurement of the pattern? Like you said it is a bit confusing.
Hi! Most of my patterns will give at least one completed measurement in the instruction section of the pattern. I try to give the measurement I think will be most helpful for sizing correctly.
hi what about the size of the other body parts like the arms and chest area for making a breastplate for example?
If you are given a size of a completed item, like the length of a bracer, or the width of a chestplate, then you can use this calculation. Measure yourself to find out how long you'd like that measurement to be on your completed item, and do the calculation. Do keep in mind that this only scales the entire item, it won't make something thinner, or wider for example.
Well how is this have 60 likes this is amazing
wouId 1mm eva foam work for gIuing veIcro onto?
Most velcro will be stronger than 1mm foam. So some options: find very weak velcro, use only a very small amount of velcro, or always make point of unfastening by pulling directly on the velcro itself and not on the foam.
@@letsmakegeekstuff4799 how thick shouId the inner foam be then?
oic. Yes, for the underfoam you could do a thinner foam, just be sure when you are opening it that you pull apart the velcro rather than pulling the foam itself. @@markvo3137
@@letsmakegeekstuff4799 so then 1mm is fine then or 2 or more? also how do i know when to stop heating my foam? shouId i scaIe my bracers to be a bit wider for the inner foam and veIcro?
ok so i figured there's a difference between craft and eva foam, hobby Iobby has 2mm and 5mm, which one shouId i use?
Do u have plans
I didn’t make plans. He’s a one of a kind.
If I want to lengthen just the circumference piece for my helmet, can I just lengthen that piece Or do I have to largeness all pieces of the helmet.
This method enlarges the entire pattern. If you want to change just one aspect you’ll have to do that by hand and it will require you to make changes to the entire pattern.
How do you get the accurate measurements
In the pattern there are instructions on how to size.
I’ve made a small model of what I wanna make so I have to upscale on pc. This was very helpful
I'm really inspired to build this.
Will the metal rip the foam over time?
Thinner foam can be torn over time, but I have done the grommets/eyelets in 5mm foam and used bracers for years without any problem. I think one key is designing it in such a way that there is not a lot of stress on just a few eyelets. If you have a long line of them, it evens out the pull on each individual.
would you ever sell these and not just the templates?
👍
AWESOME 👍
awesome stuff thank u so much
Would a 10mm work?
Yes. It would give a thick and solid look. It would also fit a bit tighter than the thinner thickness of foam.
Cool but what did you do for paint
This is exactly what i needed, thanks!
Gaye yang telah dilakukan sejak ❤👍👍👍🤝
Awesome work
I love your design. It's the closest to the Bo Katan on screen. It will go really well with my husbands Mando cosplay. He actually subscribed to your channel last night after watching your video. his KZread channel is KIngNation86.
Great walk through and excellent build!
I love you your work im new to cosplay making. I find your videos easy to follow grade level instructions for those of us that need to rewatch 😅 for clarification 😊
😢 omg the emotions of the reveal. Super, Uber ultra cool. I think it's Beautiful looks amazing I'm pretty sure the camera does not give it its full honor. Thank you for sharing 🎉
I want to cosplay as din djarin but I need to use a female chestplate would this be a good substitute? It looks very similar
That's up to you! Depending on the look you want you could make some changes to this base pattern to make it more Din Djarin shaped.
Are you planning on templates for the additional armor pieces?
I’m working on the shin and knee armor pattern now!
@@letsmakegeekstuff4799 Fantastic! My 13yro would like to make an entire Bo Katan set and I'd prefer all or most be from the same designer. Thanks
Great pattern along with a super video. I am 68 an made one for my 6 yr. old granddaughter and she was over the moon. I think if I can do it anyone can.
So glad to hear it! You sound like an awesome grandparent!
Hello I'm making a pumpkin man for Halloween how should I put orange color on the foam floor matts I'm using.
Check out my video on painting 101. You should be able to paint your EVA foam to look orange, no problem. kzread.info/dash/bejne/q5yF2seymM_bfto.html
You are my savior!!!! Thank you so much!!!!
I love it👍🙂
This is very helpful!
That’s really awesome. I just wish that I could be as quick as the videos themselves. Well done though well done!
I think you might be the only one with this issue
Very good tutorial video, I hope you make other similar ones, for example, the Robocop helmet or Judge Dredd. Thanks
I love your ideas! Thanks for watching.
Can you tell me the measurements of the dome….. what is the measurement of the petals for the dome ??
Can you tell me the measurements of the dome….. what is the measurement of the petals for the dome ??
The approximate inside circumference of this helmet when printed at 100% is 60cm. The measure from the top corner of the eye hole to the tip of the side piece is 17cm. There are instructions on how to resize the helmet in the pattern. You can also watch my youtube vid "how to resize digital patterns" which walks you through the printing settings to make adjustments.
My printer paper won’t print on the scale I need 😭
You can take the file to most copy stores and have them print on larger paper.
There’s an print option where you can make it print across multiple pages then you have to stick it together
This tutorial is soo great!!! 🙌 Does it also work with 5 mm Eva foam? 😅
Perhaps if the foam was on the dense side??? I would be concerned that 5mm would not hold shape and would not take on the smooth curves required.
@@letsmakegeekstuff4799 Yeah, thank you. I'll look if I can buy some floor Matt foam.
you are a life saver, building my mando and one part had remake few times is the boobs as didn't want to normal cup looking plates and liked Bo Katan chest plate better. You are a saint!
Glad you found this useful! I know female mando chest armor can be a challenge!
is this a copy of the template that was created by surfer dave 2 years ago?
I design all my own patterns specifically for EVA foam. You can see my patterns and read my progress blog on my website letsmakegeekstuff.weebly.com/
@@letsmakegeekstuff4799I only asked as your template looks almost identical (the T part section you stick the outer armour to is a bit more curved on yours) to the one I have from surfer dave on etsy, and I know he free hands all his templates
@@davidrose8920 it makes sense to me that two creators patterning the same piece would come up with very similar patterns. It shows that we are both good at what we do. As you look at my website and history in this space I’m sure it will give you confidence that I’m not just out here stealing other people’s work.
@@letsmakegeekstuff4799 I agree the finished piece would look very similar, as a maker my self with over 20 years experience in this area, its the way you get there that I would not expect to be similar, as we all have our own ways. 'Dave' has been creating within the mando space for over 15 years
pdo plis..