Пікірлер

• 
  @AKGateswayКүн бұрын

  You said "3 applications" toward the end of the video. Do you do 3 coats of wall paint - is that what you're referring to? If so, do you keep the original Frog Tape on the base while the wall paint is drying? I've always been told to remove the tape before the paint cures (when it has mostly dried). Thanks!

• 
  @LeeDoesStuffКүн бұрын

  Yes three coats of wall paint because the black baseboard is such a dark colour. It all depends on how stark the contrast is between your baseboard color and wall colour. Some paint covers better than others as well so you just have to take a look at things. The advice you were given on when to remove the frog tape is correct. I let it set up for about 20 minutes and then remove it. Good luck on your painting projects.

• 
  @michaelsummers50013 күн бұрын

  Nice one

• 
  @Camilliamahal8 күн бұрын

  My pressure is way too intense lol I have to be light like a feather yes 🎉

• 
  @lz802210 күн бұрын

  That is a great explanation have one of these ladders and have not figured out until now. Brovo! Leedoesstuff.

• 
  @Camilliamahal10 күн бұрын

  God your good without tape

• 
  @Camilliamahal14 күн бұрын

  Thank you 😊

• 
  @dalezegarelli555314 күн бұрын

  Never mentioned the size socket. Waste!!!

• 
  @LeeDoesStuff14 күн бұрын

  At the Five Second Mark of the Video it lists the drain plug socket size. For your reference the socket size is 17mm or a 11/16 socket size. Good luck with your oil changes on the old Ford and saving money doing it yourself. Have a great day.

• 
  @dalezegarelli555314 күн бұрын

  @@LeeDoesStuff it's 16 mm!!!!

• 
  @leodeboca16 күн бұрын

  great job!

• 
  @jeremystone5617 күн бұрын

  It is a good thing you didn't do a close up on that tape line. Your tape skills need work.

• 
  @KamfaKing5 күн бұрын

  LOL, harsh but true.

• 
  @onehandclapping309418 күн бұрын

  Title: because you’re not a real painter

• 
  @nestkeeper22 күн бұрын

  This is exactly what I was looking for. Thank you.

• 
  @JDBolt195828 күн бұрын

  Gently pry the baseboard away from the drywall using a drywall knife. This creates a gap, insert a long drywall knife into the gap while painting. clean the knife after each pass with a sponge. Use a rubber mallet and a block of soft pin to push baseboard back. set any nails which may protrude.

• 
  @chrisgraham2904Ай бұрын

  The huge majority of ladder accidents occur because the ladder feet are not properly leveled. Over 40% of residential and industrial falls involved the use of ladders. The sale of extension ladders should probably be banned unless the ladder is equipped with an approved leveling device. Unfortunately, the leveling devices are quite expensive and can often cost as much as the whole extension ladder. Manufacturers and retailers can keep the ladder cost low by not including a leveling device for the feet and homeowners, in particular, rarely wish to double the price of the ladder.

• 
  @1painter4hireАй бұрын

  This man giving the secret away, ( wiping tape with damp cloth ) . Only true Pros know these little tricks. Im sure All his work looks great.

• 
  @BaseCampMask-fr3vjАй бұрын

  Hi 🥰!!Would you be interested in testing a mask from the second-largest mask manufacturer in the United States and sharing it with your fans through a reel post?

• 
  @kassie..1593Ай бұрын

  wow cool

• 
  @CamilliamahalАй бұрын

  You got skill 🎉

• 
  @melissarobinson3523Ай бұрын

  Thanks for changing my oil, Baby. Xo (Dad said you did a great job :p)

• 
  @lz8022Ай бұрын

  Great video

• 
  @CamilliamahalАй бұрын

  Omg I had this exact issue at franks few months back thank you ❤

• 
  @lz80222 ай бұрын

  What a great idea

• 
  @LeeDoesStuff2 ай бұрын

  I agree with you but the customer gets what the customer wants. It would have been nice to reclaim the beauty in that wood but the customer wanted a fresh new look. Thanks for commenting and watching you have a keen eye!

• 
  @breezyknop2 ай бұрын

  You ruined the bad ass design in the natural wood. You should have sanded and restained the cabnits. You don't see solid, natural looking wood like that anymore. Should have white wash, lightly white stain to keep the natural grain showing through.

• 
  @carolynmcdonald27462 ай бұрын

  I was just thinking those are some well-built cabinets.

• 
  @LeeDoesStuff2 ай бұрын

  Hope it will be easier for you in the future!

• 
  @Camilliamahal2 ай бұрын

  Omg I had this issue last week doing a goat house lol thank you ❤

• 
  @LeeDoesStuff2 ай бұрын

  Thanks for watching.

• 
  @danieledrich66022 ай бұрын

  Thanks, concise and clear.

• 
  @philovance19402 ай бұрын

  To condition or not to condition! That’s the dilemma! I’ve been wearing cowboy boots and boots in general most of my life. My son just bought a pair of cowboy boots . He loves the look of stressed brown leather but I told him once he conditions with a leather conditioner, they won’t look like that anymore .

• 
  @LeeDoesStuff2 ай бұрын

  Yes if he loves them the way they are better to spray them to protect them. Let’s see if your son listens to the wisdom of his dear Ol’ dad. 😊

• 
  @Camilliamahal2 ай бұрын

  Feels like stuff Frank does on the farm 🎉

• 
  @derwingholston25502 ай бұрын

  How long should the paint dry before applying the tape?

• 
  @LeeDoesStuff2 ай бұрын

  Usually about 2 hours. If it’s cold in the place your at it could be longer

• 
  @derwingholston25502 ай бұрын

  Thank You, I was wondering what the difference was between the colors of tape.

• 
  @KamfaKing5 күн бұрын

  24 hrs, I would let most paints dry overnight, even in warm/dry conditions. Even those that dry hard, fast, such as Scuff-X.

• 
  @Offworkbuilds3 ай бұрын

  Beautiful job!! Doing the same thing this week on a set of stairs. Sanded with 220 all day today. Planning to prime with extreme bond tomorrow then emerald urethane the next day. How long did you wait in between coats of the emerald? I wasn’t sure. Also that white dove color what type of sheen is that? Semi gloss? Looks amazing!!

• 
  @LeeDoesStuff3 ай бұрын

  I waited about 2 hours between coats. The urethane dries very fast. The sheen is a satin finish. Best of luck on your project and hope you have the much needed patience to complete it hahaha.

• 
  @lz80223 ай бұрын

  Daisy my dog can get them out in 10 min and she is 8 pounds. Truly the squeaker is the drug of choice for dogs.

• 
  @Camilliamahal3 ай бұрын

  🙏

• 
  @prophecynewschannel73983 ай бұрын

  i would have used BIN. Its too much of a risk with Tannin, which that product doesnt cover

• 
  @LeeDoesStuff3 ай бұрын

  The reviews are good for BIN primer so I will give it a try on the next project and see how it works. I haven’t had any issues with the Sherwin Bonding Primer and have used it on many projects. The only time I ever had trouble with a primer is if I didn’t let it set up for at least a day. If I rushed the process the tannins would leak through but I haven’t made this mistake in many years. Thanks for the advice on the BIN primer it will be interesting to see how it works.

• 
  @prophecynewschannel73983 ай бұрын

  @@LeeDoesStuff ya tannin bleed on some wood projects really sucks. it wont cover no matter how many times you paint it. Bin will get you high tho so wear a mask lol. but seriously its the only primer i use when painting over any kind of finished wood.

• 
  @LeeDoesStuff3 ай бұрын

  Hahahah ok I will mask up when I get into it. Thanks again for the info!

• 
  @lz80223 ай бұрын

  Wow! Its beautiful

• 
  @jacekzet563 ай бұрын

  Thanks! I have to try it!

• 
  @LeeDoesStuff3 ай бұрын

  Thanks for watching.

• 
  @r.dwayne20673 ай бұрын

  Promo'SM ✨

• 
  @LeeDoesStuff3 ай бұрын

  Thanks for watching

• 
  @lz80224 ай бұрын

  Amazing! They look like new. Thanks

• 
  @LeeDoesStuff4 ай бұрын

  Thanks for watching.

• 
  @Camilliamahal4 ай бұрын

  I gotta try this goodness for my boots ❤

• 
  @age_of_reason4 ай бұрын

  This is silly. Just tape a piece of paper to the wall below the patch and curl it out by sticking tape to two ends. DIYers crack me up. 😂

• 
  @jesselopez98434 ай бұрын

  Just use masking film and pull it out

• 
  @LeeDoesStuff4 ай бұрын

  Also a great idea. Thanks for the tip!

• 
  @jesselopez98434 ай бұрын

  @@LeeDoesStuff drywaller from Vegas

• 
  @chriskvikstad49804 ай бұрын

  Great tip! Do you have any similar tips for working on ceiling patches? During my prep work and cutting, I used a wide box to catch the dust and debris but when it comes time to sand mud, I know there will be a lot of finer particulates and dust created.

• 
  @LeeDoesStuff4 ай бұрын

  A lot of the time if I’m dealing with something like you’re talking about I grab the shop vac and turn it on as I’m sanding. I hold the hose up close to the area I’m working on and it sucks pretty much everything up! Works like a charm, try it next time and let me know what you think.

• 
  @epgui4 ай бұрын

  The thing I struggle with is that when I pull the frog tape, it actually peels the paint as well. I'm using the yellow frog tape, and I'm applying Benjamin Moore paint (chantilly lace) on top of Behr drywall primer. I've never had this issue before in my life, and this year all of a sudden I can't make it work.

• 
  @LeeDoesStuff4 ай бұрын

  Oh no that really sucks! I know the struggles when things should work and they just don’t. Do you think the Behr Primer could be the reason? I’m not too familiar with Behr products, I typically use Sherwin Williams and Benjamin Moore. Let me know if you find the solution so we can all trouble shoot in the future.

• 
  @epgui4 ай бұрын

  @@LeeDoesStuff I mean, I guess I can't rule anything out, but I was using it because I thought it was a quality product. I wouldn't expect the primer to be the issue, but who knows.

• 
  @LeeDoesStuff4 ай бұрын

  Yeah me either. I wouldn’t think it would be that but you never know. Please let me know if you stop using it and the problem goes away. I’m always looking at ways to get better. Thanks for sharing.

• 
  @dazquez4 ай бұрын

  @epgui Make sure to sand the surface and clean it. You can also follow this step with primer but I use paint with primer and it works for me. Sometimes the painted surfaces are full or dirt and oils that don’t allow paint to properly adhere, and they easily peel with any tape

• 
  @jasonw92773 ай бұрын

  Try delicate purple tape it's more gentle than yellow frog, I stopped using yellow frog a while ago for this reason as well as the purple is much easier to see on white trim and actually lays out better than any other tape I've used. Use your trim paint to seal the tape as that works better than water.

• 
  @Camilliamahal4 ай бұрын

  🙏

• 
  @Camilliamahal4 ай бұрын

  Oh I get it to accumulate the dust :)

• 
  @Camilliamahal4 ай бұрын

  Why should I lean into it? Just curious ?:)

• 
  @LeeDoesStuff4 ай бұрын

  You don’t have to go crazy, just lean enough pressure against the wall with your arm to create a nice seal. Thanks for subscribing and supporting LeeDoesStuff.

• 
  @Camilliamahal4 ай бұрын

  Thank you so so much this helped so much after my dog ripped up the wall lol :)

• 
  @bwhite12344 ай бұрын

  Ah ok. Thanks

• 
  @bwhite12344 ай бұрын

  Why does it look like the same fixture in the beginning and the end?

• 
  @LeeDoesStuff4 ай бұрын

  The client wanted the same style of light but more light. If you pay close attention when I’m taking the originals off they only are wired for one light. The new light fixtures I put in although a very similar design are wired for 2 lights per fixture. The new lights provide double the light. This process will work with a different design as well. They are all pretty much the same. Good luck with your lighting project.

• 
  @Camilliamahal4 ай бұрын

  I so need this due to my dog 🐶 lol thank you I’m gonna try :)

• 
  @LeeDoesStuff4 ай бұрын

  You can do it!

• 
  @Camilliamahal4 ай бұрын

  @@LeeDoesStuff on it 👏🪄