Olá amigo , alguma solução para o atraso do dolby atmos ? Está muito ruim o delay
@TheLfkfelipeКүн бұрын
Opa Tudo certo? Que modelo de soundbar Que tu tem? Em que conteudo estas tendo este problema? Jogando, vendo filmes... Qual dispositivo Que usa, tv box, bluray player...
@silvitoooКүн бұрын
@@TheLfkfelipe tenho uma Tv Samsung the frame 65” 2021 e uma soundbar slim Samsung hw-s802b. Acho que é problema de software da Tv ou do ps5 mesmo . Em fóruns , muita gente reclamando das tvs Samsung e ps5 quanto a delay no dolby atmos .
@TheLfkfelipeКүн бұрын
@@silvitooo poiis ai esta o problema. TVs de samsung, se nao me engano de 2020 a 2023, apresentam problemas com passthrough de audio. Te recomendaria conectar o ps5 diretamente no soundbar e do soundbar pra tv pelo earc, e assim provar se tem o mesmo delay
@hasuhaki14 күн бұрын
Hello Sir! I have a Denon-DHT-316 2.1 Soundbar which settings should i use?
@marceloviniciusmoraesАй бұрын
tremeu, mas valeu! kkk
@Bunny-BonesАй бұрын
After 1 year of owning my 7.2.6 HT. My Ps5 finally sounds great. Finally 🙏🏼 thx my guy
@HugoBoss2752 ай бұрын
Your video is one of the best on the topic, nice explanation and visual example. Congrats and keep up the good work! :)
@TheLfkfelipe2 ай бұрын
Thankyou Hugo :)
@JoseGatoLuis3 ай бұрын
Great video, but I have read that pcm and pass through, if your receiver is not earc compatible, it will me only stereo 2.0 output. Can you confirm that? In that case, to use earc is the first step.
@Smiler7Smiles3 ай бұрын
This was a great video explaining. Thank you 😊
@bxb263 ай бұрын
Where or how does receiver get connected to? I want to watch the best movie quality/surround on my ps5... thank you
@KHNIsTunes3 ай бұрын
impressive! thank you it helps me a lot!
@kostaskonstantinou6403 ай бұрын
Inhave soundbar q800c what you recomend for settings??
@phoenixhorizon3 ай бұрын
You dont have Dolby Atmos as an option? That is the best option
@HackEliteSPARK4 ай бұрын
This wrong for atmos you need set atmos on ps5 not pcm
@TheLfkfelipe4 ай бұрын
Exactly. This video was recorded before the update from sony adding the support for atmos
@BabaYaga1815 ай бұрын
Since there is an Dolby Atmos option in the Audio Format Settings, should I still choose Linear PCM or can I choose Dolby Atmos to watch Atmos content?
@TheLfkfelipe5 ай бұрын
Hello. Yes, right the best option is to use the Dolby atmos if your soundbar supports is. Regards
@phoenixhorizon3 ай бұрын
Definitely Atmos option. Or height channels get disabled, mysoundbar is 11.1.4
@silvitoooКүн бұрын
@@TheLfkfelipeMas o formato dolby atmos tem muito delay . Não consigo usar-lo por causa desse atraso muito grande .
@TheLfkfelipeКүн бұрын
@@silvitooonao tenho este problema com o q990b. Tu Deve ter algum problema na configuracao ou, no dispositivo que tu ta usando pra ver filmes....
@silvitoooКүн бұрын
@@TheLfkfelipe Mas o problema não é em filmes , mas em jogos . Tv Qled 2021 Samsung . Soundbar hw-s802b . Tentei de todas as formas . Modo transmissão , ajuste de atraso . Sem sucesso . Pode ser algo da Tv ou do próprio ps5 .
@sith475 ай бұрын
Setting the TV to Pass-through and the PS5 to LPCM fixed it! Thank you so much!
@Hydyne-6 ай бұрын
I have a Bose Tv Speaker and it’s making a horrible popping noise every minute or so when I’m in the main menu of the ps5 any idea how to fix it ? I have it set to Dolby digital on my tv and then a hdmi from that to the soundbar and have the settings on soundbar and PCM on my ps5. I’ve even tried running it through optical but it still happens idk what to do now
@TheLfkfelipe6 ай бұрын
Hello If the issue persists with the HDMI and the optical, Im afraid your soundbar is faulty.
@christophmoskes97106 ай бұрын
Thx. Just what i needed
@TheLfkfelipe6 ай бұрын
Glad to help :)
@leedsdave33lane96 ай бұрын
You are really patient witheverybody!!!!
@williammalone20576 ай бұрын
Thanks for the info i only have question and does it matter if have the ps5 connected to the tv or us ok to connect it to the sound bar.
@qskelly6 ай бұрын
Why bitstream and not pcm for hdmi input??
@TheLfkfelipe6 ай бұрын
Because you don't want your tv to convert the sound data to pcm, what you want is passthrough the sound from your ps5 to your soundbar directly without any Kind of conpression, then your soundbar do all the work. Thats why you set to bitstream
@fmiah89887 ай бұрын
I recently purchased the s90c with q800c 5.1.2 channel soundbar. With the TV settings, do you know if it is best to choose Surround, Game or Adaptive? Also someone mentioned that soundbar setting on the PS5 would in fact be the most appropriate for those with soundbars rather than AV amplifier, it would be interesting to hear your response to this.
@TheLfkfelipe6 ай бұрын
Hello. Set to adaptive. The soundbar will identify the sound input and play it on the best way. On ps5, choose any option, you will have the same experience each soundbar or av receiver. Just make sure to set the sound to dolby atmos on your ps5.
@sergz824114 күн бұрын
The best is standard, all the other modes do upmixing from what you give it so 2.1 will be 11.1.4 and etc. The best and most accurate mode is Standard and the rest just do upmixing with different eq settings. Adaptive is the worse since it adjusts eq on the go which so some sounds will be louder or quiet randomly
@shakengandulf7 ай бұрын
If i have a 5.1.2 setup. Sony a5000. No rear speakers, is that a 5.1 or 7.1 setup on the option?
@Froggy_Delic9422 күн бұрын
I believe it is 5.1.
@petersiska99397 ай бұрын
Ki what is ki 70 ki 80 ki 90 i just have the q 80 haha
@pami87067 ай бұрын
I have a 2ch sony ht-s100f sounbar hooked to a Samsung nu6900. I'm just trying to get the most out of my limited, dinosaur, poor man equipment. It's supposed to support dolby digital +, but I haven't figured out how to get the benefit of it. My Samsung only gives the choice of bitstream and PCM in the input and output settings. Any advice would be greatly appreciated.
@shakengandulf7 ай бұрын
Kinda wish you tested the soundbar option for the last of us game. I have a a5000 Sony bar and im torn between Av amplifier and the soundbar option. 😐
@danielfreire87297 ай бұрын
Hello, thanks for the video, i have a Soundbar bar q800b 5.1.2, in av receiver i set in to 5.1 or 7.1? And to get Dolby atmos, how its work?
@TheLfkfelipe7 ай бұрын
Hello Daniel On you ps5, the hdmi device type to av receiver, and the audio format priority to dolby atmos, and thats it, regarding the tv configurations, just follow my video
@prestond.96757 ай бұрын
What would be the best settings with Samsung hw-q990b soundbar? I have difficulty finding the best sound output. Thanks.
@prestond.96757 ай бұрын
Also, my setup is Samsung Q800b75, hw-q990b with rear speakers, ps5 of course.
@TheLfkfelipe7 ай бұрын
Hello preston. With the last update from ps5 that now support dolby atmos, just change the audio from your ps5 to dolby atmos, make sure to activate the earc and paasthrough audio on yoir tv configuration and finally, turn on your ps5 and immediayely check on your soundbar pressing the info button, if it shows on the dusplay "dolby atmos". If does shows, you have set everything correctly And, I recommend you to use the adaptive sound mode on your q990b, it delivers a better soundtage Please subs to the channel
@prestond.96757 ай бұрын
@@TheLfkfelipeThank you! And should I select soundbar over amplifier or pcm?
@gabytro7 ай бұрын
BULLSHT. By choosing liniar you cancel the surround. Every tv has a delay sound setting..you adjust that and you have 0 lag
@TheLfkfelipe7 ай бұрын
Is not bullshit. You have to search more to understand better what is Linear Pcm with compatible devices.
@punisher181028 ай бұрын
I have a Sony TV and a LG s75qr soundbar . Ps5 plugged into tv Apple TV plugged into my soundbar . All works except when I turn my ps5 on there’s no sound . I have to manually change the input on the soundbar to Earc then I’ll have sound . How can I have it where the sound automatically turns on when ps5 turns on
@cipriandjbril8 ай бұрын
bro ! what about now ? that sony updated to dolby atmos ? still using linear ? you really think using dolby atmos will AFECT INPUT LAG IN MULTIPLAYER GAMES ?
@cipriandjbril8 ай бұрын
IM using samsung tv q90a and a 7.1 sound system from sonos
@TheLfkfelipe8 ай бұрын
Hello. If your soundbar supports dolby atmos, go with it wothout doubts. Im using it, has a better soudstage and almost 0 inputt lagg while playing
@Unlimited21008 ай бұрын
Great video, thanks! And if I have a simple 2.1 soundbar connected to the TV through Optical cable? I have to set passthrough on tv and pcm linear on PS5?Thx!!
@emire1238 ай бұрын
Interesting when I put my ps5 on PCM, it goes to STEREO mode, its only when I put my mode on dolby digiital, Atmos or DTS then the game goes to 7.1 after reading 100's of videos and articles I have learned that every single person has a different opinion on how to set their ps5 up . its exhausting. I tested out your way of setting up and I had the complete opposite of what you showed.Especially concerning using PCM. Not to say your setup was wrong. I just believe your setup may not work for everyone.
@TheLfkfelipe8 ай бұрын
Hello. Yes, it could not work for everyone because of differente tv models that doesnt passthrough correctly the sound to the soundbar. Have you tried to connect the hdmi port directly to the soundbar and make the test? Do you have the samsung q990b soundbar? Best regards
@emire1238 ай бұрын
Hello, First I didn't mean to sound rude. I was only frustrated because there are so many different opinions on how to set your audio video equipment, you dont know where to turn. I have a vizio Sounbar.5.1.2 (with up fire speakers, sub woofer and rear speakers) its a 2018 model, with Dolby Atmos/DTS Virtial X. MyTV is TCL 2019 with ARC (no eArc). I have my ps5 going to my tv and my TV arc going to my sound bar arc. Honestly I Dont use the rear speakers. I run DTS with virtual X, it sounds great. @@TheLfkfelipe
@emire1238 ай бұрын
One more thing, With PS5 finally having Dolby Atmos format option, I tried to run it on my atmos sound bar, but my sound bar does not detect Atmos(this is when I connect my ps5 to my TV. When I connect my PS5 directly to my sound bar it detects it, but something is off. Maybe I just need to upgrade both my sound bar and TV to newer ones with eARC? Thanks for your videos and for the time to respond to my comment!
@TheLfkfelipe8 ай бұрын
@@emire123 no, you were not rude. Thats the answear to the problem. Your tv only supports Arc, so you cannot get a proper uncompressed audio or Full dolby atmos sound from your ps5. Only if you connect the hdmi directly to the soundbar. Right now, you are getting a normal dts 5.1 compressed with upscaling.
@TheLfkfelipe8 ай бұрын
@@emire123 to your soundbar to play uncompressed audio and Dolby atmos, your tv needs an EARC port. The ARC port doesnt support lossless/uncompressed audio like dolby atmos, LPCM, Dts-x, dts-hd, dolby true hd... You should only change your tv for a new one that supports earc. My suggestion is to go to a LG TV, that from what I heard on the majority of comments, is the one that works better for all. Also make sure your soundbar also has earc port, if dont, you should change both devices. On my channel, theres a video where I explain the differences between arc and earc. Please, sub to my channel :)
@OutKastWill20129 ай бұрын
Hi there, I am a bit confused, I had PS5 set to atmos and then changed it to PCM with AV 5.1( TV is LG B2 and sound bar is Sony S20R) my TV I set it to PCM too thinking they have to match in both devices, but you set it to PCM in console and pass trough in TV, can you explain this and also confirm the best settings for my setup?
@OutKastWill20129 ай бұрын
I was trying this setup, I even downloaded tlou remastered to test it like you did, the only way I could get it to say 5.1 in the game was with pass trough I TV and dolby in the ps5, if I set it to pcm in console it sets back to 2.0 ingame
@TheLfkfelipe9 ай бұрын
You don't have to match the settings of your tv with your ps5. It's simple, the sound mode you set on your ps5 (Atmos, LPCM uncompressed...), this sound data will be sent to your tv, and your tv will pass through the sound without any compression to your soundbar through the earc port. Your soundbar will automatically play the sound with the settings you have set on your ps5 (dolby atmos, lpcm...). That's why you have to set your tv to passthrough. If you set your tv to pcm, your tv will take all the sound data and compress it to 2.0 channels. Please, subs to the channel :)
@TheLfkfelipe9 ай бұрын
@OutKastWill2012 your soundbar unfortunately doesn't have an earc port to play LPCM uncompressed audio or Dolby ATMOS. You can play only compressed 5.1 channels. So there's 2 options. First of all, make sure your tv is set to passthrough or bitstream... On your ps5, set to av receiver, 5.1 channels and LPCM, and check if on the game the last of us it shows 5.1 ch. With LPCM, you will have the lowest input lag while playing games. If this doesn't work, you will have to set ps5 to the old sound modes Dolby or dts, and unfortunately, they have a bit of input lag. Don't use Dolby atmos because your soundbar doesn't support it
@OutKastWill20129 ай бұрын
Yeah I left it as audio pass trough and bitstream on the TV, but on the console I could never get tlou to show 5.1 with pcm, only with either dolby audio, dolby atmos or dolby dts was I able to get the game to show auto 5.1
@TheLfkfelipe9 ай бұрын
@OutKastWill2012 Yes, Unfortunately as your soundbar doesn't have Earc port, you can't have 5.1 or 7.1 LPCM uncompressed audio. Don't use Dolby atmos because what atmos does is up firing speakers, and your soundbar doesn't have them, so you could lose some sound details. Use Dolby or DTS with 5.1. 👍
@horrorbiz729 ай бұрын
I’ve been looking for a video with a clear explanation on settings. Thank you! Once I made these changes, everything sounds better from the correct speakers.
@TheLfkfelipe9 ай бұрын
Glad to help :)
@MrBlackDeath189 ай бұрын
Hey, could you help me too? I'm just a little frustrated. Although I have set everything up as you have shown, I still have some unanswered questions. I would really be very grateful if you could answer this. About my setting: LG OLED65CX9 LA Sonos Beam 2 Gen Sonos Sub Mini 2 x Sonos One SL Regarding my questions: 1. Why do you set the "Bitstream" format in the LG setting HDMI Input Auto Format and the "Linear PCM" setting in the PS5? Doesn't that overlap? 2. Isn't PCM just intended for setting up stereo systems (2.0)? or am I confusing something? 3. You also select AV amplifier in the PS5 settings, even if you don't have an AV amplifier, did I understand that correctly? (Because you mention in the video that you connected the PS5 directly to the TV and the TV directly to the sound system (there is no AV amplifier in between) If yes, why? The sound from the Playstation actually comes to the TV and through the settings (scrolling) of the TV it goes directly to the sound system. So shouldn't you choose TV instead of AV amplifier? 4. I get the Multiroom Channel PCM 5.1 format via the Sonos app. displayed. As you described in the video, this is the best format. However, I have read in other forums that this format is the worst. Here, for example, described by a user that when Multichannel is displayed in the Sonos app, the wrong setting is present: (If it shows LPCM 7.1 MULTICHANNEL or 5.1 MULTICHANNEL that means it is not PASSING THROUGH correctly. MULTICHANNEL is the key word while Looking at your Sonos App while playing a NON ATMOS movie. If it says MULTICHANNEL then it is not working as it should be. IF IT DOESN”T SAY MULTICHANNEL that means it is pass through correctly and that the problem lies within the PHYSICAL APPLE 4K TV AND “THIN” APPLE TV APPS PROVIDED WITHIN THE CX AND Xbox and PS5 Apps.) Could you explain me, what is the correct way?
@TheLfkfelipe9 ай бұрын
@MrBlackDeath18 Hello. Yes of course. 1 - You set to bitstream on your tv to make sure it doesnt compress any data from the sound that is being sent from your ps5 to the soundbar. What you want is your tv to send all data uncompressed to your soundbar, and your sounbar do all the job of mixing the sound to 5.1, 7.1, dolby, DTS... 2 - No, PCM is an uncompressed audio that is capable to send up to 7.1 channels to your compatible soundbar or av receiver. However, the soundbar must be compatible with the LPCM uncompressed audio, if is not, will only be converted to a simple 2.0 channel. On the Q990B, you can see on the video that is compatible and works perfectly. Also, today, with the last update from Sony, you can set the ps5 as Dolby Atmos that adds up firing sound to compatible soundbars. 3 - Yes, using LPCM option and AV receiver, you can change the speakers positions accordingly with your speakers position on your room to have the most accurate sound. On the TV, you have to make sure that you have the Bitstream, passthrough and EARC activated, then your tv doesnt make any compression in the process. Just think that doing this, its like the PS5 is connected directly to the soundbar, that is the functionallity of the EARC port from your TV, the video is sent to your tv, and the sound is sent directly to the soundbar. You can search more videos to understand better, but this is the most simple way to explain. 4- If you are getting Multi channel 5.1,you've done everything correctly :), you are receiving umcompressed audio with almost zero Input lagg :). On the forums, theres a lot of people that doesnt understand this format and says bullshit that this is worst. How can be worst if LPCm can send up to 37 Megabytes of metadata of sound to your soundbar, and when you select Dolby or DTS compressed, only can send up to 1 Megabytes of metadata ? On my channel, I uploaded a video explaining the formats of audio and their capabilities, maybe it will help you to understand better. Just remember, its normal that LPCm can sounds lower, you just have to raise the volume up and thats it. What dolby and dts does, as being compressed, all the sound are raised up, and looks like is better, but its not, it sound bad and also have a lot of input lagg while playing. Regarding the comment of the guy, his mentioning another issue while watching apple tv, that supports DOLBY ATMOS. If you are watching dolby atmos content, and your app shows Multi channel, something is wrong in the configurations. Beside all that Ive explained to you above, the PS5 now supports Dolby Atmos on the recent update, so, just choose that option on the pS5, and keep the settings as I show you on the Video, and you will get a Full Dolby Atmos sound, that is better than LPCM. If you have a APPLE 4K PLAYER, your tv must be configured on the same way that is on my video, and of course, you have to configure your apple 4k player to send the datacorrectly to your soundbar. Is the same with any device, android box, netflix... Dont use the PS5 to watch netflix, apple tv, HBO ... as ps5 doesnt supports dolby vision and dolby atmos for streaming content, just for playing games. Hope I Helped, Please subs to the channel :)
@MrBlackDeath189 ай бұрын
@@TheLfkfelipe First of all, thank you very much for the good and quick answer!!!! ❤ I also have another question about the PS5 update. Does it make sense to set Dolby Atmos because it also compresses the sound like DTS or Dolby Audio, right? I also read that Dolby Atmos is only worthwhile in conjunction with an X.Y.Z sound system (e.g. 5.1.2 or 7.1.2), because Dolby Atmos takes the ceiling systems (z) into account. That's why I don't know whether I should set linear pcm or dolby atmos.
@TheLfkfelipe9 ай бұрын
@@MrBlackDeath18 good point. If your soundbar have up firing speakers, you should use dolby atmos, because it has the technology of sony tempest 3d audio in it. If your soundbar doesnt have up firing speakers, go with lpcm :)
@MrBlackDeath189 ай бұрын
@@TheLfkfelipe thank you very much <3
@Wishful-Thinking10 ай бұрын
What’s the settings you use on both tv and ps5 if you connect your ps5 to the tv via the supplied hdmi cable and tv to surround sound amplifier via a digital optical cable?
@TheLfkfelipe10 ай бұрын
Hello. I connect the ps5 hdmi directly to the Tv in any hdmi port (except the earc port). And then, another HDMI from the tv (earc port) directly to the soundbar in to the soundbar hdmi earc port. The setup, if you have an lg cx tv, you can follow the instructions on my video. If you have another tv model, just make sure that the sound is in passthrough mode. Never use digital optical cable, its old and gives you a lot of input lagg while playing
@Wishful-Thinking10 ай бұрын
@@TheLfkfelipe Thanks for the reply. 🙂Unfortunately I have a Panasonic surround sound theatre system which was very expensive at the time and is excellent but is now getting old but is more than capable of still giving brilliant 5.1 surround sound. Unfortunately it doesn’t have a means of connecting the amplifier to the tv via hmdi. My PS4 has a digital optic port which worked fine because it connected directly to the surround sound amps digital optical port via a digital optical cable and a digital optical splitter shared with my Blue-ray player. As you know a digital optical port is something which the ps5 doesn’t have ( Yet another stupid cost cutting decision by Sony. Thanks Sony! 🤨) A digital optical cable is the only means of me connecting my surround sound system to a PS5. I tried putting an optical cable direct from my Panasonic tv’s digital optical port to the surround sound amplifiers digital optical port as advised by several KZread vids but got no sound at all from my surround sound amp. Also it meant disconnecting my Blue-ray players direct digital optical cable feed to the surround sound amp because I needed the only digital optical port on the amp to connect to the digital optical port on the tv and of course I then got no 5.1 from the Blue-ray player just normal stereo. Very frustrating all this. ☹️
@EntnimraS10 ай бұрын
TE AMOOOOOOOOOOOOOOOO GRACIAAAAAAAAAAAS!!!
@TheLfkfelipe10 ай бұрын
Contento en poder ayudar Subscribe al canal :)
@trc150810 ай бұрын
Im a bit confused, i have a Samsung soundbar and 2 rear speakers so thay would be 5.1 correct? On my soundbar with all of these settings on it stays on stereo on the soundbar and not multi channel, is this normal?
@TheLfkfelipe10 ай бұрын
Hello. If you followed all my setup video, you should be receiving a multichannel pcm. What is your tv and soundbar model?
@trc150810 ай бұрын
@TheLfkfelipe my tv is a Samsung 65Q70 and my soundbar is a Q600c
@TheLfkfelipe10 ай бұрын
@trc1508 Your tv and your soundbar supports uncompressed audio, so there's something configured incorrectly in your tv. There is some videos on KZread showing how to configure the sound pass-through with samsung tvs. If I'm not mistaken, there's a bug with some samsung tv models where the pass-through doesn't work when you set the ps5 to av receiver. Try using the hdmi type as "soundbar" in your ps5 and check if it fix it.
@bracanin00110 ай бұрын
What if my tv doesnt have pass through
@TheLfkfelipe10 ай бұрын
Does Your tv has an earc or arc port? If yes, it should have an option of pass-through or bitstream
@Uuuung10 ай бұрын
What is your settings on the q990b soundbar? What you have changed in the samsung app like bass etc
@TheLfkfelipe10 ай бұрын
Hello On my soundbar, I use adaptive sound + space fit and for the center and height speakers, I raised the sound level up to 3 Regarding the Bass, as I live on an apartment, I decreased to -3 to dont disturb the neighbours 😆😆 If you dont have this problem, leave it to 0, or if you love bass, increase it to +2. Hope I helped. Please subs to the channel
@MartinKusimo10 ай бұрын
Hello, not sure if you're still replying to comments, but what about when I am watching 4K Blu-rays on my PS5 and want the Dolby Atmos. Surely I switch the audio format to Dolby?
@TheLfkfelipe10 ай бұрын
Hello Martin Yes, for 4k blurays, you need to set to dolby
@MartinKusimo10 ай бұрын
@TheLfkfelipe Thanks for your response. I thought so. Sucks when you're a big gamer AND big film buff. I wish it had two different options/ modes for games and Blu-rays, so I wouldn't have to keep switching. Maybe this could be a solution when the PS5 update that brings Dolby Atmos for gaming arrives.
@TheLfkfelipe10 ай бұрын
@@MartinKusimo exactly, with the new update, this issue will be solved and no need to be swithing all the time, just stick with atmos and thats it :) Best regards
@JakubGorcovsky10 ай бұрын
What sound mode do you use ? Game or adaptive +
@TheLfkfelipe10 ай бұрын
Hello. Always use the adaptive. It analyzes the signal in real-time to ensure dialogue legibility and optimize surround effects to the content that is being sent to your soundbar. Is very effective Hope I helped. Please, Like and subs to the channel :)
@WhatIsMyLifeLmao10 ай бұрын
Recently picked up a DS40Q LG soundbar because my tv has a ARC hdmi port considering my old soundbar only had optical. When i go into my digital out settings i get: -Auto -Bypass -PCM -Dolby digital plus -Dolby digital Is bypass the one i need to select since i don't have passthrough?
@TheLfkfelipe10 ай бұрын
Hello. Your tv should have an option of passthrough, ifs not, then by pass its the one. On your ps5, just use pcm and 2.0 channels as your soundbar only supports 2.1 channels. Best resgards
@MrSquallthelionheart10 ай бұрын
I use jbl 820w 9.1 and lg cx and it doesn't pass dolby except if I turn off earc or switch to auto with earc on ..if I turn it off it passes dolby with arc..would you please advise and also advise I should use 7.1 or 5.1
@TheLfkfelipe10 ай бұрын
Hello On this video, it shows to use the uncompressed lpcm 7.1 sound. Don't use Dolby or dts with ps5 because they are compressed 5.1 sound with a lot of input lagg, and your soundbar is capable of playing lpcm 7.1. Just use the same settings on the TV as I used it, and make sure the cables are connected correctly in to the right inputs and it should work as you can see on the video while testing the game the last of us. You soundbar or application should display as well the sound that you are receiving as Multi Channel pcm If doesn't work, try connecting your ps5 hdmi directly to your soundbar. You will loose the hdmi 2.1 capabilities but just to check if doing this, the issue you're having is gone
@CasualAlarmist11 ай бұрын
This is incorrect as Brian Slack, DTS engineer, explains in the video below. PCM - the source device (br/uhd player, console etc) decodes the digital sound data and sends it as max 7.1 (PCM has max 8 channels) signal to the TV/Receiver/Soundbar with no sound object metadata (height/ 3D placement). Bitstream (Dolby & DTS options shown) - the source device sends the digital sound data (including the additional sound object meta data required for Atmos and DTS:X) directly to the TV/Receiver/Soundbar so the receiver can decode the DTS or Dolby digital signals according to it's own specifications. Compression isn't a factor. kzread.info/dash/bejne/eIh1q7xxg7Gan84.html&ab_channel=MovieUniversity
@TheLfkfelipe11 ай бұрын
Hello @casualAlarmist. In the ps5 the compression it is a factor. When you select the Dolby or dts option, you are receiving in the soundboard a simple dts and Dolby digital format, compressed with high input lagg. Right now the maximum audio quality that ps5 can pass-through to a receiver or soundbar is the uncompressed pcm at maximum of 7.1 channels with no sound object height or 3d placement. You can see at the game the last of us when changing to Dolby and dts in the ps5, that the game automatically identifies as a 5.1 channels, and is very noticeable the compression of the sound, is flat in comparison with the pcm. Another way for checking is on the soundboard display, as it shows as simple dts, and simple Dolby digital content. Ps5 does not support Dolby digital plus, true HD, atmos for gaming (this will change on the next update) or DTSHD dtsx.
@TheLfkfelipe11 ай бұрын
I saw the video at the link you shared, and he's explanation only matters for blu-ray players or some player devices which supports all uncompressed types of audio as: Pcm uncompressed 5.1, 7.1 Dolby true HD: Dolby atmos is inside this format Dts-hd - Dts-x Ps5 doesn't support uncompressed Dolby true hd and DTShd for now. You can search the especifications of the ps5 at the official website or in blogs of professional people who will give you more details.
@MisterTyson11 ай бұрын
Wow this helped me so much thank you for this video I’ve been looking for days for help. I have one question tho, I have the same sound bar as you 11.1.4 q990c. What audio setting do you use, surround, adaptive, standard, or game for PS5 and for regular movies what should I use
@TheLfkfelipe11 ай бұрын
Glad to help. Use the Adaptive. Samsung adjust automatically for each content when the adaptive is activated :) Please subs to the channel :) BR
@omerdeveci17538 ай бұрын
I have the same sound bar should I select av amplifier and 5.1 or should I select soundbar on the ps5
@TheLfkfelipe8 ай бұрын
@@omerdeveci1753 of you have a Q990B. With the last ps5 update. Select av amplifier and dolby atmos. With this config theres no error
@omerdeveci17538 ай бұрын
@@TheLfkfelipe thx for the answer, I tried every single option when you select linear PCM it always sends stereo PCM signal not a multi channel signal. And I couldn't hear a difference between av amplifier Atmos and soundbar Atmos settings. Tried it with Astro's play room, Ragnarok and spider man 2 i think the upwards firing channels are working judging by ear. But yeah Atmos is the best option for q990c in my opinion
@ishkapiska45167 ай бұрын
@@omerdeveci1753av amplifier 7.1*
@131cgomez11 ай бұрын
Great video Luan! Unfortunately, I think there is something wrong with my set up. I have a LG C1 and Vizio Elevate soundbar. I tried the same settings (could find the DTV Audio Setting on C1) and am unable to get LPCM to properly pass through to my PS5. There were a few instances where the surround was working but center channel/dialogue was non-existent. Any ideas what could be going wrong?
@TheLfkfelipe11 ай бұрын
Hello. Your soundbar is a 5.1.4 setup. In the ps5, set the sound as av receiver, 5.1 channels and lpcm. Is going to be the best match for your soundbar. And after that, check in the game the last of us if automatically recognize as a 5.1. This should work better for you. If doesnt recognize as 5.1, some configuration is wrong in your tv or your soundbar. Remember that when using uncompressed audio, is normal that the volume is lower compared to dolby and dts compressed. Just raise the volume and thats it :) Hope this helps. Please subs to the channel :)
@theplaystationgamer10011 ай бұрын
The game (the last of us remastered) is showing 7.1 on auto whether I select soundbar or av amplifier. I’m sure I’m getting 7.1 with the soundbar setting.
@TheLfkfelipe11 ай бұрын
Yes, with both you get 7.1, however, av amplifier is better because you have the garantee that you are receiving a full uncompressed audio, and not a compressed 7.1. Also, when you select av receiver, you can change the speakers positions on the ps5, so you can match exactly where youre speakers are located.
@theplaystationgamer10011 ай бұрын
@@TheLfkfelipe ok thanks I’ll keep on AV. With the new update coming, best to use Dolby atmos for games or leave as linear pcm? Thanks
@TheLfkfelipe11 ай бұрын
@@theplaystationgamer100 , when the update arrives, use the Dolby atmos. Will grant you a more immersive sound, better than 7.1 :)
@theplaystationgamer10011 ай бұрын
@@TheLfkfelipe will do thank you 👍🏻
@James-Burton11 ай бұрын
greetings! thank you for the informations! then. I did exactly as you showed. the tv supports eARC but HT doesn't, it's just ARC. I use a hdmi 2.1 cable just for that. What happened was that the corresponding option to "pass the audio directly" was only enabled on the tv when I selected Dolby on the ps5. When I select pcm it even gets 5.1 (I used tlou to test) and I didn't notice a considerable difference. my question is: would it be better to leave everything selected in pcm or dolby, with the option of direct transmission, is it better? I can't see a noticeable difference...
@TheLfkfelipe11 ай бұрын
Yes, thats the problem. If the HT just support Arc, you cannot have uncompressed audio, thats why you dont notice difference between them. What happens is that your soundbar is downmixing all the sound data to a simple lossy 5.1 pcm, so, theres no much difference with the normal dolby. . Your way to go is selecting the dolby compressed audio option on your ps5. If you get to much input lagg, select then pcm. In my youtube channel, Ive uploaded a video where I explain better the differences between arc and earc. Hope I helped Please, subs to the channel :)
@James-Burton11 ай бұрын
@@TheLfkfelipe Thanks a lot for the help! It's been a while since I bought a Samsung neo qled qn90b 55" but my HT is a 2015 LG model. It's an excellent 5.1 but I've been noticing that it wasn't performing well on the ps5, I decided to change the cable but now, with your explanations, I realized the problem, it's in my mid-term goals to change devices. Good thing I also have a Pulse 3d, that's the only way I can enjoy the real audio of the PS5! Receive another subscriber, who is very grateful for your support. A hug from São Paulo Capital, Brazil!
@TheLfkfelipe11 ай бұрын
@@James-Burton thanks my friend.
@AndrewKjelson11 ай бұрын
Hello! I have a LG S80QY 3.1.3 Soundbar with woofer and two LG 140W rear speakers. Would I be using 5.1 Audio? Also, do all games support the rear speakers? I dont always hear them, especially while watching tv shows
@TheLfkfelipe11 ай бұрын
Hello. With this configurations, 5.1 is perfectly fine. Remember that in some games, you still have to manually set the sound as surround sound or home theater in the menu of the games, for example, resident evil remake games, you have to set manually. The last of us games for example, it goes automatically as you can see on the video. Not all contents will be surround sound, specially tv shows...
@RainSpec11 ай бұрын
Hello, I have an LG SN11RG 7.1.4 soundbar. I have selected the option "AV Amplifier" and selected 7.1 channels. For speaker positions, do I leave it on default or change it? I tried to change it to how it is since Surround Left and Right are on the soundbar itself but on the PS5 I can only get up to 80 degrees. Is there anything I am missing? Thank You!
@TheLfkfelipe11 ай бұрын
Hello Just adjust the rear left and right speakers according to the position you put them. The right and left speakers of your soundbar, dont change it, let on default. Hope I helped. Please subs to the channel :)
Пікірлер
Olá amigo , alguma solução para o atraso do dolby atmos ? Está muito ruim o delay
Opa Tudo certo? Que modelo de soundbar Que tu tem? Em que conteudo estas tendo este problema? Jogando, vendo filmes... Qual dispositivo Que usa, tv box, bluray player...
@@TheLfkfelipe tenho uma Tv Samsung the frame 65” 2021 e uma soundbar slim Samsung hw-s802b. Acho que é problema de software da Tv ou do ps5 mesmo . Em fóruns , muita gente reclamando das tvs Samsung e ps5 quanto a delay no dolby atmos .
@@silvitooo poiis ai esta o problema. TVs de samsung, se nao me engano de 2020 a 2023, apresentam problemas com passthrough de audio. Te recomendaria conectar o ps5 diretamente no soundbar e do soundbar pra tv pelo earc, e assim provar se tem o mesmo delay
Hello Sir! I have a Denon-DHT-316 2.1 Soundbar which settings should i use?
tremeu, mas valeu! kkk
After 1 year of owning my 7.2.6 HT. My Ps5 finally sounds great. Finally 🙏🏼 thx my guy
Your video is one of the best on the topic, nice explanation and visual example. Congrats and keep up the good work! :)
Thankyou Hugo :)
Great video, but I have read that pcm and pass through, if your receiver is not earc compatible, it will me only stereo 2.0 output. Can you confirm that? In that case, to use earc is the first step.
This was a great video explaining. Thank you 😊
Where or how does receiver get connected to? I want to watch the best movie quality/surround on my ps5... thank you
impressive! thank you it helps me a lot!
Inhave soundbar q800c what you recomend for settings??
You dont have Dolby Atmos as an option? That is the best option
This wrong for atmos you need set atmos on ps5 not pcm
Exactly. This video was recorded before the update from sony adding the support for atmos
Since there is an Dolby Atmos option in the Audio Format Settings, should I still choose Linear PCM or can I choose Dolby Atmos to watch Atmos content?
Hello. Yes, right the best option is to use the Dolby atmos if your soundbar supports is. Regards
Definitely Atmos option. Or height channels get disabled, mysoundbar is 11.1.4
@@TheLfkfelipeMas o formato dolby atmos tem muito delay . Não consigo usar-lo por causa desse atraso muito grande .
@@silvitooonao tenho este problema com o q990b. Tu Deve ter algum problema na configuracao ou, no dispositivo que tu ta usando pra ver filmes....
@@TheLfkfelipe Mas o problema não é em filmes , mas em jogos . Tv Qled 2021 Samsung . Soundbar hw-s802b . Tentei de todas as formas . Modo transmissão , ajuste de atraso . Sem sucesso . Pode ser algo da Tv ou do próprio ps5 .
Setting the TV to Pass-through and the PS5 to LPCM fixed it! Thank you so much!
I have a Bose Tv Speaker and it’s making a horrible popping noise every minute or so when I’m in the main menu of the ps5 any idea how to fix it ? I have it set to Dolby digital on my tv and then a hdmi from that to the soundbar and have the settings on soundbar and PCM on my ps5. I’ve even tried running it through optical but it still happens idk what to do now
Hello If the issue persists with the HDMI and the optical, Im afraid your soundbar is faulty.
Thx. Just what i needed
Glad to help :)
You are really patient witheverybody!!!!
Thanks for the info i only have question and does it matter if have the ps5 connected to the tv or us ok to connect it to the sound bar.
Why bitstream and not pcm for hdmi input??
Because you don't want your tv to convert the sound data to pcm, what you want is passthrough the sound from your ps5 to your soundbar directly without any Kind of conpression, then your soundbar do all the work. Thats why you set to bitstream
I recently purchased the s90c with q800c 5.1.2 channel soundbar. With the TV settings, do you know if it is best to choose Surround, Game or Adaptive? Also someone mentioned that soundbar setting on the PS5 would in fact be the most appropriate for those with soundbars rather than AV amplifier, it would be interesting to hear your response to this.
Hello. Set to adaptive. The soundbar will identify the sound input and play it on the best way. On ps5, choose any option, you will have the same experience each soundbar or av receiver. Just make sure to set the sound to dolby atmos on your ps5.
The best is standard, all the other modes do upmixing from what you give it so 2.1 will be 11.1.4 and etc. The best and most accurate mode is Standard and the rest just do upmixing with different eq settings. Adaptive is the worse since it adjusts eq on the go which so some sounds will be louder or quiet randomly
If i have a 5.1.2 setup. Sony a5000. No rear speakers, is that a 5.1 or 7.1 setup on the option?
I believe it is 5.1.
Ki what is ki 70 ki 80 ki 90 i just have the q 80 haha
I have a 2ch sony ht-s100f sounbar hooked to a Samsung nu6900. I'm just trying to get the most out of my limited, dinosaur, poor man equipment. It's supposed to support dolby digital +, but I haven't figured out how to get the benefit of it. My Samsung only gives the choice of bitstream and PCM in the input and output settings. Any advice would be greatly appreciated.
Kinda wish you tested the soundbar option for the last of us game. I have a a5000 Sony bar and im torn between Av amplifier and the soundbar option. 😐
Hello, thanks for the video, i have a Soundbar bar q800b 5.1.2, in av receiver i set in to 5.1 or 7.1? And to get Dolby atmos, how its work?
Hello Daniel On you ps5, the hdmi device type to av receiver, and the audio format priority to dolby atmos, and thats it, regarding the tv configurations, just follow my video
What would be the best settings with Samsung hw-q990b soundbar? I have difficulty finding the best sound output. Thanks.
Also, my setup is Samsung Q800b75, hw-q990b with rear speakers, ps5 of course.
Hello preston. With the last update from ps5 that now support dolby atmos, just change the audio from your ps5 to dolby atmos, make sure to activate the earc and paasthrough audio on yoir tv configuration and finally, turn on your ps5 and immediayely check on your soundbar pressing the info button, if it shows on the dusplay "dolby atmos". If does shows, you have set everything correctly And, I recommend you to use the adaptive sound mode on your q990b, it delivers a better soundtage Please subs to the channel
@@TheLfkfelipeThank you! And should I select soundbar over amplifier or pcm?
BULLSHT. By choosing liniar you cancel the surround. Every tv has a delay sound setting..you adjust that and you have 0 lag
Is not bullshit. You have to search more to understand better what is Linear Pcm with compatible devices.
I have a Sony TV and a LG s75qr soundbar . Ps5 plugged into tv Apple TV plugged into my soundbar . All works except when I turn my ps5 on there’s no sound . I have to manually change the input on the soundbar to Earc then I’ll have sound . How can I have it where the sound automatically turns on when ps5 turns on
bro ! what about now ? that sony updated to dolby atmos ? still using linear ? you really think using dolby atmos will AFECT INPUT LAG IN MULTIPLAYER GAMES ?
IM using samsung tv q90a and a 7.1 sound system from sonos
Hello. If your soundbar supports dolby atmos, go with it wothout doubts. Im using it, has a better soudstage and almost 0 inputt lagg while playing
Great video, thanks! And if I have a simple 2.1 soundbar connected to the TV through Optical cable? I have to set passthrough on tv and pcm linear on PS5?Thx!!
Interesting when I put my ps5 on PCM, it goes to STEREO mode, its only when I put my mode on dolby digiital, Atmos or DTS then the game goes to 7.1 after reading 100's of videos and articles I have learned that every single person has a different opinion on how to set their ps5 up . its exhausting. I tested out your way of setting up and I had the complete opposite of what you showed.Especially concerning using PCM. Not to say your setup was wrong. I just believe your setup may not work for everyone.
Hello. Yes, it could not work for everyone because of differente tv models that doesnt passthrough correctly the sound to the soundbar. Have you tried to connect the hdmi port directly to the soundbar and make the test? Do you have the samsung q990b soundbar? Best regards
Hello, First I didn't mean to sound rude. I was only frustrated because there are so many different opinions on how to set your audio video equipment, you dont know where to turn. I have a vizio Sounbar.5.1.2 (with up fire speakers, sub woofer and rear speakers) its a 2018 model, with Dolby Atmos/DTS Virtial X. MyTV is TCL 2019 with ARC (no eArc). I have my ps5 going to my tv and my TV arc going to my sound bar arc. Honestly I Dont use the rear speakers. I run DTS with virtual X, it sounds great. @@TheLfkfelipe
One more thing, With PS5 finally having Dolby Atmos format option, I tried to run it on my atmos sound bar, but my sound bar does not detect Atmos(this is when I connect my ps5 to my TV. When I connect my PS5 directly to my sound bar it detects it, but something is off. Maybe I just need to upgrade both my sound bar and TV to newer ones with eARC? Thanks for your videos and for the time to respond to my comment!
@@emire123 no, you were not rude. Thats the answear to the problem. Your tv only supports Arc, so you cannot get a proper uncompressed audio or Full dolby atmos sound from your ps5. Only if you connect the hdmi directly to the soundbar. Right now, you are getting a normal dts 5.1 compressed with upscaling.
@@emire123 to your soundbar to play uncompressed audio and Dolby atmos, your tv needs an EARC port. The ARC port doesnt support lossless/uncompressed audio like dolby atmos, LPCM, Dts-x, dts-hd, dolby true hd... You should only change your tv for a new one that supports earc. My suggestion is to go to a LG TV, that from what I heard on the majority of comments, is the one that works better for all. Also make sure your soundbar also has earc port, if dont, you should change both devices. On my channel, theres a video where I explain the differences between arc and earc. Please, sub to my channel :)
Hi there, I am a bit confused, I had PS5 set to atmos and then changed it to PCM with AV 5.1( TV is LG B2 and sound bar is Sony S20R) my TV I set it to PCM too thinking they have to match in both devices, but you set it to PCM in console and pass trough in TV, can you explain this and also confirm the best settings for my setup?
I was trying this setup, I even downloaded tlou remastered to test it like you did, the only way I could get it to say 5.1 in the game was with pass trough I TV and dolby in the ps5, if I set it to pcm in console it sets back to 2.0 ingame
You don't have to match the settings of your tv with your ps5. It's simple, the sound mode you set on your ps5 (Atmos, LPCM uncompressed...), this sound data will be sent to your tv, and your tv will pass through the sound without any compression to your soundbar through the earc port. Your soundbar will automatically play the sound with the settings you have set on your ps5 (dolby atmos, lpcm...). That's why you have to set your tv to passthrough. If you set your tv to pcm, your tv will take all the sound data and compress it to 2.0 channels. Please, subs to the channel :)
@OutKastWill2012 your soundbar unfortunately doesn't have an earc port to play LPCM uncompressed audio or Dolby ATMOS. You can play only compressed 5.1 channels. So there's 2 options. First of all, make sure your tv is set to passthrough or bitstream... On your ps5, set to av receiver, 5.1 channels and LPCM, and check if on the game the last of us it shows 5.1 ch. With LPCM, you will have the lowest input lag while playing games. If this doesn't work, you will have to set ps5 to the old sound modes Dolby or dts, and unfortunately, they have a bit of input lag. Don't use Dolby atmos because your soundbar doesn't support it
Yeah I left it as audio pass trough and bitstream on the TV, but on the console I could never get tlou to show 5.1 with pcm, only with either dolby audio, dolby atmos or dolby dts was I able to get the game to show auto 5.1
@OutKastWill2012 Yes, Unfortunately as your soundbar doesn't have Earc port, you can't have 5.1 or 7.1 LPCM uncompressed audio. Don't use Dolby atmos because what atmos does is up firing speakers, and your soundbar doesn't have them, so you could lose some sound details. Use Dolby or DTS with 5.1. 👍
I’ve been looking for a video with a clear explanation on settings. Thank you! Once I made these changes, everything sounds better from the correct speakers.
Glad to help :)
Hey, could you help me too? I'm just a little frustrated. Although I have set everything up as you have shown, I still have some unanswered questions. I would really be very grateful if you could answer this. About my setting: LG OLED65CX9 LA Sonos Beam 2 Gen Sonos Sub Mini 2 x Sonos One SL Regarding my questions: 1. Why do you set the "Bitstream" format in the LG setting HDMI Input Auto Format and the "Linear PCM" setting in the PS5? Doesn't that overlap? 2. Isn't PCM just intended for setting up stereo systems (2.0)? or am I confusing something? 3. You also select AV amplifier in the PS5 settings, even if you don't have an AV amplifier, did I understand that correctly? (Because you mention in the video that you connected the PS5 directly to the TV and the TV directly to the sound system (there is no AV amplifier in between) If yes, why? The sound from the Playstation actually comes to the TV and through the settings (scrolling) of the TV it goes directly to the sound system. So shouldn't you choose TV instead of AV amplifier? 4. I get the Multiroom Channel PCM 5.1 format via the Sonos app. displayed. As you described in the video, this is the best format. However, I have read in other forums that this format is the worst. Here, for example, described by a user that when Multichannel is displayed in the Sonos app, the wrong setting is present: (If it shows LPCM 7.1 MULTICHANNEL or 5.1 MULTICHANNEL that means it is not PASSING THROUGH correctly. MULTICHANNEL is the key word while Looking at your Sonos App while playing a NON ATMOS movie. If it says MULTICHANNEL then it is not working as it should be. IF IT DOESN”T SAY MULTICHANNEL that means it is pass through correctly and that the problem lies within the PHYSICAL APPLE 4K TV AND “THIN” APPLE TV APPS PROVIDED WITHIN THE CX AND Xbox and PS5 Apps.) Could you explain me, what is the correct way?
@MrBlackDeath18 Hello. Yes of course. 1 - You set to bitstream on your tv to make sure it doesnt compress any data from the sound that is being sent from your ps5 to the soundbar. What you want is your tv to send all data uncompressed to your soundbar, and your sounbar do all the job of mixing the sound to 5.1, 7.1, dolby, DTS... 2 - No, PCM is an uncompressed audio that is capable to send up to 7.1 channels to your compatible soundbar or av receiver. However, the soundbar must be compatible with the LPCM uncompressed audio, if is not, will only be converted to a simple 2.0 channel. On the Q990B, you can see on the video that is compatible and works perfectly. Also, today, with the last update from Sony, you can set the ps5 as Dolby Atmos that adds up firing sound to compatible soundbars. 3 - Yes, using LPCM option and AV receiver, you can change the speakers positions accordingly with your speakers position on your room to have the most accurate sound. On the TV, you have to make sure that you have the Bitstream, passthrough and EARC activated, then your tv doesnt make any compression in the process. Just think that doing this, its like the PS5 is connected directly to the soundbar, that is the functionallity of the EARC port from your TV, the video is sent to your tv, and the sound is sent directly to the soundbar. You can search more videos to understand better, but this is the most simple way to explain. 4- If you are getting Multi channel 5.1,you've done everything correctly :), you are receiving umcompressed audio with almost zero Input lagg :). On the forums, theres a lot of people that doesnt understand this format and says bullshit that this is worst. How can be worst if LPCm can send up to 37 Megabytes of metadata of sound to your soundbar, and when you select Dolby or DTS compressed, only can send up to 1 Megabytes of metadata ? On my channel, I uploaded a video explaining the formats of audio and their capabilities, maybe it will help you to understand better. Just remember, its normal that LPCm can sounds lower, you just have to raise the volume up and thats it. What dolby and dts does, as being compressed, all the sound are raised up, and looks like is better, but its not, it sound bad and also have a lot of input lagg while playing. Regarding the comment of the guy, his mentioning another issue while watching apple tv, that supports DOLBY ATMOS. If you are watching dolby atmos content, and your app shows Multi channel, something is wrong in the configurations. Beside all that Ive explained to you above, the PS5 now supports Dolby Atmos on the recent update, so, just choose that option on the pS5, and keep the settings as I show you on the Video, and you will get a Full Dolby Atmos sound, that is better than LPCM. If you have a APPLE 4K PLAYER, your tv must be configured on the same way that is on my video, and of course, you have to configure your apple 4k player to send the datacorrectly to your soundbar. Is the same with any device, android box, netflix... Dont use the PS5 to watch netflix, apple tv, HBO ... as ps5 doesnt supports dolby vision and dolby atmos for streaming content, just for playing games. Hope I Helped, Please subs to the channel :)
@@TheLfkfelipe First of all, thank you very much for the good and quick answer!!!! ❤ I also have another question about the PS5 update. Does it make sense to set Dolby Atmos because it also compresses the sound like DTS or Dolby Audio, right? I also read that Dolby Atmos is only worthwhile in conjunction with an X.Y.Z sound system (e.g. 5.1.2 or 7.1.2), because Dolby Atmos takes the ceiling systems (z) into account. That's why I don't know whether I should set linear pcm or dolby atmos.
@@MrBlackDeath18 good point. If your soundbar have up firing speakers, you should use dolby atmos, because it has the technology of sony tempest 3d audio in it. If your soundbar doesnt have up firing speakers, go with lpcm :)
@@TheLfkfelipe thank you very much <3
What’s the settings you use on both tv and ps5 if you connect your ps5 to the tv via the supplied hdmi cable and tv to surround sound amplifier via a digital optical cable?
Hello. I connect the ps5 hdmi directly to the Tv in any hdmi port (except the earc port). And then, another HDMI from the tv (earc port) directly to the soundbar in to the soundbar hdmi earc port. The setup, if you have an lg cx tv, you can follow the instructions on my video. If you have another tv model, just make sure that the sound is in passthrough mode. Never use digital optical cable, its old and gives you a lot of input lagg while playing
@@TheLfkfelipe Thanks for the reply. 🙂Unfortunately I have a Panasonic surround sound theatre system which was very expensive at the time and is excellent but is now getting old but is more than capable of still giving brilliant 5.1 surround sound. Unfortunately it doesn’t have a means of connecting the amplifier to the tv via hmdi. My PS4 has a digital optic port which worked fine because it connected directly to the surround sound amps digital optical port via a digital optical cable and a digital optical splitter shared with my Blue-ray player. As you know a digital optical port is something which the ps5 doesn’t have ( Yet another stupid cost cutting decision by Sony. Thanks Sony! 🤨) A digital optical cable is the only means of me connecting my surround sound system to a PS5. I tried putting an optical cable direct from my Panasonic tv’s digital optical port to the surround sound amplifiers digital optical port as advised by several KZread vids but got no sound at all from my surround sound amp. Also it meant disconnecting my Blue-ray players direct digital optical cable feed to the surround sound amp because I needed the only digital optical port on the amp to connect to the digital optical port on the tv and of course I then got no 5.1 from the Blue-ray player just normal stereo. Very frustrating all this. ☹️
TE AMOOOOOOOOOOOOOOOO GRACIAAAAAAAAAAAS!!!
Contento en poder ayudar Subscribe al canal :)
Im a bit confused, i have a Samsung soundbar and 2 rear speakers so thay would be 5.1 correct? On my soundbar with all of these settings on it stays on stereo on the soundbar and not multi channel, is this normal?
Hello. If you followed all my setup video, you should be receiving a multichannel pcm. What is your tv and soundbar model?
@TheLfkfelipe my tv is a Samsung 65Q70 and my soundbar is a Q600c
@trc1508 Your tv and your soundbar supports uncompressed audio, so there's something configured incorrectly in your tv. There is some videos on KZread showing how to configure the sound pass-through with samsung tvs. If I'm not mistaken, there's a bug with some samsung tv models where the pass-through doesn't work when you set the ps5 to av receiver. Try using the hdmi type as "soundbar" in your ps5 and check if it fix it.
What if my tv doesnt have pass through
Does Your tv has an earc or arc port? If yes, it should have an option of pass-through or bitstream
What is your settings on the q990b soundbar? What you have changed in the samsung app like bass etc
Hello On my soundbar, I use adaptive sound + space fit and for the center and height speakers, I raised the sound level up to 3 Regarding the Bass, as I live on an apartment, I decreased to -3 to dont disturb the neighbours 😆😆 If you dont have this problem, leave it to 0, or if you love bass, increase it to +2. Hope I helped. Please subs to the channel
Hello, not sure if you're still replying to comments, but what about when I am watching 4K Blu-rays on my PS5 and want the Dolby Atmos. Surely I switch the audio format to Dolby?
Hello Martin Yes, for 4k blurays, you need to set to dolby
@TheLfkfelipe Thanks for your response. I thought so. Sucks when you're a big gamer AND big film buff. I wish it had two different options/ modes for games and Blu-rays, so I wouldn't have to keep switching. Maybe this could be a solution when the PS5 update that brings Dolby Atmos for gaming arrives.
@@MartinKusimo exactly, with the new update, this issue will be solved and no need to be swithing all the time, just stick with atmos and thats it :) Best regards
What sound mode do you use ? Game or adaptive +
Hello. Always use the adaptive. It analyzes the signal in real-time to ensure dialogue legibility and optimize surround effects to the content that is being sent to your soundbar. Is very effective Hope I helped. Please, Like and subs to the channel :)
Recently picked up a DS40Q LG soundbar because my tv has a ARC hdmi port considering my old soundbar only had optical. When i go into my digital out settings i get: -Auto -Bypass -PCM -Dolby digital plus -Dolby digital Is bypass the one i need to select since i don't have passthrough?
Hello. Your tv should have an option of passthrough, ifs not, then by pass its the one. On your ps5, just use pcm and 2.0 channels as your soundbar only supports 2.1 channels. Best resgards
I use jbl 820w 9.1 and lg cx and it doesn't pass dolby except if I turn off earc or switch to auto with earc on ..if I turn it off it passes dolby with arc..would you please advise and also advise I should use 7.1 or 5.1
Hello On this video, it shows to use the uncompressed lpcm 7.1 sound. Don't use Dolby or dts with ps5 because they are compressed 5.1 sound with a lot of input lagg, and your soundbar is capable of playing lpcm 7.1. Just use the same settings on the TV as I used it, and make sure the cables are connected correctly in to the right inputs and it should work as you can see on the video while testing the game the last of us. You soundbar or application should display as well the sound that you are receiving as Multi Channel pcm If doesn't work, try connecting your ps5 hdmi directly to your soundbar. You will loose the hdmi 2.1 capabilities but just to check if doing this, the issue you're having is gone
This is incorrect as Brian Slack, DTS engineer, explains in the video below. PCM - the source device (br/uhd player, console etc) decodes the digital sound data and sends it as max 7.1 (PCM has max 8 channels) signal to the TV/Receiver/Soundbar with no sound object metadata (height/ 3D placement). Bitstream (Dolby & DTS options shown) - the source device sends the digital sound data (including the additional sound object meta data required for Atmos and DTS:X) directly to the TV/Receiver/Soundbar so the receiver can decode the DTS or Dolby digital signals according to it's own specifications. Compression isn't a factor. kzread.info/dash/bejne/eIh1q7xxg7Gan84.html&ab_channel=MovieUniversity
Hello @casualAlarmist. In the ps5 the compression it is a factor. When you select the Dolby or dts option, you are receiving in the soundboard a simple dts and Dolby digital format, compressed with high input lagg. Right now the maximum audio quality that ps5 can pass-through to a receiver or soundbar is the uncompressed pcm at maximum of 7.1 channels with no sound object height or 3d placement. You can see at the game the last of us when changing to Dolby and dts in the ps5, that the game automatically identifies as a 5.1 channels, and is very noticeable the compression of the sound, is flat in comparison with the pcm. Another way for checking is on the soundboard display, as it shows as simple dts, and simple Dolby digital content. Ps5 does not support Dolby digital plus, true HD, atmos for gaming (this will change on the next update) or DTSHD dtsx.
I saw the video at the link you shared, and he's explanation only matters for blu-ray players or some player devices which supports all uncompressed types of audio as: Pcm uncompressed 5.1, 7.1 Dolby true HD: Dolby atmos is inside this format Dts-hd - Dts-x Ps5 doesn't support uncompressed Dolby true hd and DTShd for now. You can search the especifications of the ps5 at the official website or in blogs of professional people who will give you more details.
Wow this helped me so much thank you for this video I’ve been looking for days for help. I have one question tho, I have the same sound bar as you 11.1.4 q990c. What audio setting do you use, surround, adaptive, standard, or game for PS5 and for regular movies what should I use
Glad to help. Use the Adaptive. Samsung adjust automatically for each content when the adaptive is activated :) Please subs to the channel :) BR
I have the same sound bar should I select av amplifier and 5.1 or should I select soundbar on the ps5
@@omerdeveci1753 of you have a Q990B. With the last ps5 update. Select av amplifier and dolby atmos. With this config theres no error
@@TheLfkfelipe thx for the answer, I tried every single option when you select linear PCM it always sends stereo PCM signal not a multi channel signal. And I couldn't hear a difference between av amplifier Atmos and soundbar Atmos settings. Tried it with Astro's play room, Ragnarok and spider man 2 i think the upwards firing channels are working judging by ear. But yeah Atmos is the best option for q990c in my opinion
@@omerdeveci1753av amplifier 7.1*
Great video Luan! Unfortunately, I think there is something wrong with my set up. I have a LG C1 and Vizio Elevate soundbar. I tried the same settings (could find the DTV Audio Setting on C1) and am unable to get LPCM to properly pass through to my PS5. There were a few instances where the surround was working but center channel/dialogue was non-existent. Any ideas what could be going wrong?
Hello. Your soundbar is a 5.1.4 setup. In the ps5, set the sound as av receiver, 5.1 channels and lpcm. Is going to be the best match for your soundbar. And after that, check in the game the last of us if automatically recognize as a 5.1. This should work better for you. If doesnt recognize as 5.1, some configuration is wrong in your tv or your soundbar. Remember that when using uncompressed audio, is normal that the volume is lower compared to dolby and dts compressed. Just raise the volume and thats it :) Hope this helps. Please subs to the channel :)
The game (the last of us remastered) is showing 7.1 on auto whether I select soundbar or av amplifier. I’m sure I’m getting 7.1 with the soundbar setting.
Yes, with both you get 7.1, however, av amplifier is better because you have the garantee that you are receiving a full uncompressed audio, and not a compressed 7.1. Also, when you select av receiver, you can change the speakers positions on the ps5, so you can match exactly where youre speakers are located.
@@TheLfkfelipe ok thanks I’ll keep on AV. With the new update coming, best to use Dolby atmos for games or leave as linear pcm? Thanks
@@theplaystationgamer100 , when the update arrives, use the Dolby atmos. Will grant you a more immersive sound, better than 7.1 :)
@@TheLfkfelipe will do thank you 👍🏻
greetings! thank you for the informations! then. I did exactly as you showed. the tv supports eARC but HT doesn't, it's just ARC. I use a hdmi 2.1 cable just for that. What happened was that the corresponding option to "pass the audio directly" was only enabled on the tv when I selected Dolby on the ps5. When I select pcm it even gets 5.1 (I used tlou to test) and I didn't notice a considerable difference. my question is: would it be better to leave everything selected in pcm or dolby, with the option of direct transmission, is it better? I can't see a noticeable difference...
Yes, thats the problem. If the HT just support Arc, you cannot have uncompressed audio, thats why you dont notice difference between them. What happens is that your soundbar is downmixing all the sound data to a simple lossy 5.1 pcm, so, theres no much difference with the normal dolby. . Your way to go is selecting the dolby compressed audio option on your ps5. If you get to much input lagg, select then pcm. In my youtube channel, Ive uploaded a video where I explain better the differences between arc and earc. Hope I helped Please, subs to the channel :)
@@TheLfkfelipe Thanks a lot for the help! It's been a while since I bought a Samsung neo qled qn90b 55" but my HT is a 2015 LG model. It's an excellent 5.1 but I've been noticing that it wasn't performing well on the ps5, I decided to change the cable but now, with your explanations, I realized the problem, it's in my mid-term goals to change devices. Good thing I also have a Pulse 3d, that's the only way I can enjoy the real audio of the PS5! Receive another subscriber, who is very grateful for your support. A hug from São Paulo Capital, Brazil!
@@James-Burton thanks my friend.
Hello! I have a LG S80QY 3.1.3 Soundbar with woofer and two LG 140W rear speakers. Would I be using 5.1 Audio? Also, do all games support the rear speakers? I dont always hear them, especially while watching tv shows
Hello. With this configurations, 5.1 is perfectly fine. Remember that in some games, you still have to manually set the sound as surround sound or home theater in the menu of the games, for example, resident evil remake games, you have to set manually. The last of us games for example, it goes automatically as you can see on the video. Not all contents will be surround sound, specially tv shows...
Hello, I have an LG SN11RG 7.1.4 soundbar. I have selected the option "AV Amplifier" and selected 7.1 channels. For speaker positions, do I leave it on default or change it? I tried to change it to how it is since Surround Left and Right are on the soundbar itself but on the PS5 I can only get up to 80 degrees. Is there anything I am missing? Thank You!
Hello Just adjust the rear left and right speakers according to the position you put them. The right and left speakers of your soundbar, dont change it, let on default. Hope I helped. Please subs to the channel :)