Better with the DBk on👍. Sleek looking, eliminates the one thing I did not like much on the Inty
@gregthoms523223 күн бұрын
So what happens if you lace a 21" rim to a 19" hub
@Apache246racingАй бұрын
Coitado do motor, vai aquecer muito, tampou quase todo radiador
@RaulRodriguez-ux6pd2 ай бұрын
What's the fork cap torx # I can't find it ?
@anuraagarora3 ай бұрын
Is it available now?
@andreastomblin21373 ай бұрын
Great content, this is the best video on these pipes. I have bought these pipes and looking forward to fitting them. what's your long term view on them?
@mydroidid3 ай бұрын
A few rust spots at the bottom leading edge of the 'bottle' I dint care enough to clean the mud off , still on the bike ,still good ,a bit louder now that it ran abt 30,000kms
@andreastomblin21373 ай бұрын
Thanks a lot for getting to me. I think that would have happened to any exhaust, so it's pretty good. Thanks again!
@hindustaniindian47564 ай бұрын
Which handle bar riser you have installed kindly give me the details
@mydroidid4 ай бұрын
Indimotard
@frankburdi10015 ай бұрын
That reproduction nonsense is garbage plenty of other people share their stuff freely smells like yuppies to me
@shupshekitty6 ай бұрын
I've got an 82 low rider front hub that I was trying to lace to 19" rim. It didn't have a hub when I got it, so, I had no reference. The service manual is really confusing on lacing this wheel. I'll have to re-read it now to see if it makes more sense. This video was a big help.
@giopirmisashvili55146 ай бұрын
Thank you ❤
@rafihussain7 ай бұрын
I caught eye on " Made in Germany " Shouldn't be it " Made in USA" !!!. Its be sanctioned I guess 😇
@atwinowner87569 ай бұрын
3 years 😮 any rust issues? I think this is mild steel chrome and not stainless steel matt polish, as available now on the aew site. Please reply ✌️
@mydroidid9 ай бұрын
Mild rusting but my fault for not cleaning it well , Stainless price wise and look wise make no sense
@atwinowner87569 ай бұрын
2 years old.. any suggestions now?
@atwinowner87569 ай бұрын
+ I checked now & it comes in 2 variants of stainless steel and mild steel chrome. I think yours pair are mild steel, so any rusting issues you witnessed over time?
@dineshsnake Жыл бұрын
were to buy this exhaust from and cost
@valkman761 Жыл бұрын
If those jeans had any higher waist, it would top the ones we see today.
@briangtester2536 Жыл бұрын
I had a Kawasaki 650 from 1979 once, on this you also had to take of the cams because the shims where under a bucket, but it was easy to do in place, and there was only two camshafts in all, even though there where 4 cylinders. you didn't have to worry about coollant lines, fuel lines, frame dismantling and jacks, special tools... the list goes on.
@briangtester2536 Жыл бұрын
This is insane!! I thought about one of these bikes, they are not that expensive here in DK, and i think they are cool. Now: I would NEVER touch one of these bikes. Probably couldn't find anyone to do that insane procedure, even if i could afford it.
@rkdash2006 Жыл бұрын
actually with db killer it is smooth
@rodrigopereira8655 Жыл бұрын
lots of information in this video...thanks for sharing. the more videos like this the better.💯🧰🦾
@theoriginalmungaman Жыл бұрын
If you could get the idle low enough on the Revolution engine it would sound very similar. The 60 deg Revolution engine also uses a single crank pin. But I’m going with Evo or shovel.
@critterIMHO Жыл бұрын
BIG improvement
@samchisolm8713 Жыл бұрын
Well done.
@hdVRODridersCH Жыл бұрын
Harley-Davidson V-Rods are so exciting! The V-rod engine is a works racer machine for the start dash, and a Porsche for high rotation! The V-rod engine is a direct descendant of the works machine VR1000! It's a great motorcycle👍
@danofboro9008 Жыл бұрын
Why does this does stress on the H
@thejpod77 Жыл бұрын
This video was reminiscent of the 80's sex ed videos many were subjected to, super corny, maybe a little uncomfortable at times to watch, but chock full of information. I am working on a 75 Ironhead bobber project and using 16" rims front and back. I was having a devil of a time relacing the rims, partly because I didn't take reference shots before I tore them down, and it had been months between teardown, paint, and relace. As it turns out I have an A and a B style hub so as I moved onto my front rim I couldn't figure out why the pattern wasn't working (and I got lucky on the rear), now I know. Serious props to this video, if you need to lace your rims, this is the holy bible of instruction.
@RomaChronicles Жыл бұрын
Hey You haven't made a video on the dashcam. or if you have can you share the link
@MegaBruceC Жыл бұрын
Smaller diameter bars?
@paulcarpenter9832 Жыл бұрын
Very interesting 👌 👍
@anutoshkatkade7620 Жыл бұрын
I want those exaust plz tell me from where to buy??
@vijay___review Жыл бұрын
Hows the heat on this ? Is it like the stocks ones or are they are not hot at all ??
@mydroidid Жыл бұрын
Stocks are unbearable.. This is not noticable
@Pushrodlife Жыл бұрын
Great video. Thanks
@jagannathchoudhury7599 Жыл бұрын
Is it available
@mydroidid Жыл бұрын
Sorry not available until next year
@johnkidd48222 жыл бұрын
a vhs video as good as the day it was made. Thank hle
@andybryant17722 жыл бұрын
They look like t120 mufflers. I wonder if I can get them in Australia.
@41BeachComber2 жыл бұрын
This has to be done every 10,000 miles? I just bout a used one with 28,000 miles and it's never been done. So I guess I need to make an appointment soon to get this costly job done?
@timculpepper4939 Жыл бұрын
Well i’ve had mine since 2003 it’s an anniversary edition I had it done by the dealer at 12,000 miles I know I have 76,000 miles on it, and it still runs like new. I pull it out every once in a while take it for 100 mile spin, I’ve change the oil every 2500 miles. It’s a bulletproof engine.
@doodle_caprisun Жыл бұрын
I have a 2004 I got new, has almost 100K miles on it, I’ve never done a valve lash adjustment or even checked it…. Belt broke after 18 yrs, Starter Solenoid broke after 20 yrs. Just tires, brake pads, change oil every 1-2k miles and flush radiator every 4, brake and clutch fluid flush every 2yrs. Runs like new every time !
@danyjose3502 жыл бұрын
How can i buy these?whats the price???.is there any short bottle exausts for classic which comes in good quality nd long lasting....
@gonzalezreyes2952 жыл бұрын
hello people need help, the street and street rod 750 don't have an extra tub for the gearbox, right? and only the engine oil belongs there and should be responsible for the engine and transmission, correct?
@mydroidid2 жыл бұрын
Yes just like most Japanese bikes
@jean-claudebaisero71332 жыл бұрын
hello, Great video but I did not quite understood your explaination about the fitting problem you had with the left muffler?
@toncitvrde49712 жыл бұрын
Worstest wheel ewer.. I was happiest man on planet when ill throw them into garbage and replaces with aluminium wheels. Always riding ont the edge with that you newer know when they gonna lose and make wobling... 🤑🤑🤑
@billyflops7981 Жыл бұрын
Their Worth the maintenance.
@sparkyhoraczko5548 Жыл бұрын
Right On X GEN! We took great pride with NO ear pieces, NO rear suspend and spokes to log 500 miles per day. All smiles, NO complaints! Service checks every 2 days or 1K mi. Don't forget your Carbon Fibre Full Fairing! NOMAD....since 65 and still burnin rubber.
@Slashrocksism2 жыл бұрын
Nice Video Bro .. very detailed and well explained .. QQ: Now that its been almost 2 years any feedback on rusting issues ?.. Also any issues with cops seeing this new set on the bike?
@mydroidid2 жыл бұрын
Not really just some rust at the points that got scratched while I dropped the bike once , no problems with the police but I will need to refill the glass wool as it is louder than the 1st year
@Slashrocksism2 жыл бұрын
@@mydroidid thank you ..🍻
@vaishakhpv133932 жыл бұрын
Hi how much DB do they produce with and without baffles and any idea of weight compared to stock?
@sgtrock28212 жыл бұрын
man I'm going to cast wheels. screw these spoke wheels.
@janaharajanrajan46522 жыл бұрын
Weight difference stock vs aew
@mydroidid2 жыл бұрын
About 5kg
@janaharajanrajan46522 жыл бұрын
@@mydroidid thanks bro
@lionelscott58392 жыл бұрын
Have to spoke a new wheel for a pan head ,is there a video I could watch?
Пікірлер
❤❤
Your the best thank u
Cost in dollars?
Better with the DBk on👍. Sleek looking, eliminates the one thing I did not like much on the Inty
So what happens if you lace a 21" rim to a 19" hub
Coitado do motor, vai aquecer muito, tampou quase todo radiador
What's the fork cap torx # I can't find it ?
Is it available now?
Great content, this is the best video on these pipes. I have bought these pipes and looking forward to fitting them. what's your long term view on them?
A few rust spots at the bottom leading edge of the 'bottle' I dint care enough to clean the mud off , still on the bike ,still good ,a bit louder now that it ran abt 30,000kms
Thanks a lot for getting to me. I think that would have happened to any exhaust, so it's pretty good. Thanks again!
Which handle bar riser you have installed kindly give me the details
Indimotard
That reproduction nonsense is garbage plenty of other people share their stuff freely smells like yuppies to me
I've got an 82 low rider front hub that I was trying to lace to 19" rim. It didn't have a hub when I got it, so, I had no reference. The service manual is really confusing on lacing this wheel. I'll have to re-read it now to see if it makes more sense. This video was a big help.
Thank you ❤
I caught eye on " Made in Germany " Shouldn't be it " Made in USA" !!!. Its be sanctioned I guess 😇
3 years 😮 any rust issues? I think this is mild steel chrome and not stainless steel matt polish, as available now on the aew site. Please reply ✌️
Mild rusting but my fault for not cleaning it well , Stainless price wise and look wise make no sense
2 years old.. any suggestions now?
+ I checked now & it comes in 2 variants of stainless steel and mild steel chrome. I think yours pair are mild steel, so any rusting issues you witnessed over time?
were to buy this exhaust from and cost
If those jeans had any higher waist, it would top the ones we see today.
I had a Kawasaki 650 from 1979 once, on this you also had to take of the cams because the shims where under a bucket, but it was easy to do in place, and there was only two camshafts in all, even though there where 4 cylinders. you didn't have to worry about coollant lines, fuel lines, frame dismantling and jacks, special tools... the list goes on.
This is insane!! I thought about one of these bikes, they are not that expensive here in DK, and i think they are cool. Now: I would NEVER touch one of these bikes. Probably couldn't find anyone to do that insane procedure, even if i could afford it.
actually with db killer it is smooth
lots of information in this video...thanks for sharing. the more videos like this the better.💯🧰🦾
If you could get the idle low enough on the Revolution engine it would sound very similar. The 60 deg Revolution engine also uses a single crank pin. But I’m going with Evo or shovel.
BIG improvement
Well done.
Harley-Davidson V-Rods are so exciting! The V-rod engine is a works racer machine for the start dash, and a Porsche for high rotation! The V-rod engine is a direct descendant of the works machine VR1000! It's a great motorcycle👍
Why does this does stress on the H
This video was reminiscent of the 80's sex ed videos many were subjected to, super corny, maybe a little uncomfortable at times to watch, but chock full of information. I am working on a 75 Ironhead bobber project and using 16" rims front and back. I was having a devil of a time relacing the rims, partly because I didn't take reference shots before I tore them down, and it had been months between teardown, paint, and relace. As it turns out I have an A and a B style hub so as I moved onto my front rim I couldn't figure out why the pattern wasn't working (and I got lucky on the rear), now I know. Serious props to this video, if you need to lace your rims, this is the holy bible of instruction.
Hey You haven't made a video on the dashcam. or if you have can you share the link
Smaller diameter bars?
Very interesting 👌 👍
I want those exaust plz tell me from where to buy??
Hows the heat on this ? Is it like the stocks ones or are they are not hot at all ??
Stocks are unbearable.. This is not noticable
Great video. Thanks
Is it available
Sorry not available until next year
a vhs video as good as the day it was made. Thank hle
They look like t120 mufflers. I wonder if I can get them in Australia.
This has to be done every 10,000 miles? I just bout a used one with 28,000 miles and it's never been done. So I guess I need to make an appointment soon to get this costly job done?
Well i’ve had mine since 2003 it’s an anniversary edition I had it done by the dealer at 12,000 miles I know I have 76,000 miles on it, and it still runs like new. I pull it out every once in a while take it for 100 mile spin, I’ve change the oil every 2500 miles. It’s a bulletproof engine.
I have a 2004 I got new, has almost 100K miles on it, I’ve never done a valve lash adjustment or even checked it…. Belt broke after 18 yrs, Starter Solenoid broke after 20 yrs. Just tires, brake pads, change oil every 1-2k miles and flush radiator every 4, brake and clutch fluid flush every 2yrs. Runs like new every time !
How can i buy these?whats the price???.is there any short bottle exausts for classic which comes in good quality nd long lasting....
hello people need help, the street and street rod 750 don't have an extra tub for the gearbox, right? and only the engine oil belongs there and should be responsible for the engine and transmission, correct?
Yes just like most Japanese bikes
hello, Great video but I did not quite understood your explaination about the fitting problem you had with the left muffler?
Worstest wheel ewer.. I was happiest man on planet when ill throw them into garbage and replaces with aluminium wheels. Always riding ont the edge with that you newer know when they gonna lose and make wobling... 🤑🤑🤑
Their Worth the maintenance.
Right On X GEN! We took great pride with NO ear pieces, NO rear suspend and spokes to log 500 miles per day. All smiles, NO complaints! Service checks every 2 days or 1K mi. Don't forget your Carbon Fibre Full Fairing! NOMAD....since 65 and still burnin rubber.
Nice Video Bro .. very detailed and well explained .. QQ: Now that its been almost 2 years any feedback on rusting issues ?.. Also any issues with cops seeing this new set on the bike?
Not really just some rust at the points that got scratched while I dropped the bike once , no problems with the police but I will need to refill the glass wool as it is louder than the 1st year
@@mydroidid thank you ..🍻
Hi how much DB do they produce with and without baffles and any idea of weight compared to stock?
man I'm going to cast wheels. screw these spoke wheels.
Weight difference stock vs aew
About 5kg
@@mydroidid thanks bro
Have to spoke a new wheel for a pan head ,is there a video I could watch?
How can I buy this please help me bro
Very nice
Great vid