This video was reminiscent of the 80's sex ed videos many were subjected to, super corny, maybe a little uncomfortable at times to watch, but chock full of information. I am working on a 75 Ironhead bobber project and using 16" rims front and back. I was having a devil of a time relacing the rims, partly because I didn't take reference shots before I tore them down, and it had been months between teardown, paint, and relace. As it turns out I have an A and a B style hub so as I moved onto my front rim I couldn't figure out why the pattern wasn't working (and I got lucky on the rear), now I know. Serious props to this video, if you need to lace your rims, this is the holy bible of instruction.
@shupshekitty5 ай бұрын
I've got an 82 low rider front hub that I was trying to lace to 19" rim. It didn't have a hub when I got it, so, I had no reference. The service manual is really confusing on lacing this wheel. I'll have to re-read it now to see if it makes more sense. This video was a big help.
@bigboarmcs2 жыл бұрын
The only video I could find that explained this. Very comprehensive and thorough. Many thanks.
@MrJackfreedom6 жыл бұрын
the best explanation i found on internet, thanks also to the little man that take many hits
@johnkidd48222 жыл бұрын
a vhs video as good as the day it was made. Thank hle
@thegreatestmotherfuckereve27756 жыл бұрын
I have to do this today at MMI. thanks for the refresher.
@grego10r5 жыл бұрын
Truly the best video i did my spokes
@rysammy5 жыл бұрын
Great video as well! A+thumbs up!
@carlos.lopes756 жыл бұрын
GREAT VIDEO! Thanks!!
@manolofdez37393 жыл бұрын
EXCELENT!! i appreciate it THIS EXPLANATION!!!!!!!
@Princess_n_TheDuke2 жыл бұрын
Great vid
@gregthoms523220 күн бұрын
So what happens if you lace a 21" rim to a 19" hub
@andreaagnelli1466 жыл бұрын
perfect video thank's
@Patrick_B687-36 жыл бұрын
Springer featured here. Hell yea...
@Martuszewski6 жыл бұрын
Thanks
@periyadhanasekarkavitha28134 жыл бұрын
👌👌👌👌👌
@derickmoore35296 жыл бұрын
It will never be the same
@lionelscott58392 жыл бұрын
Have to spoke a new wheel for a pan head ,is there a video I could watch?
@marcmizzi78313 жыл бұрын
DO YOU KNOW WHERE I CAN FIND THE RIM/HUB DIMENSION CHART? OR DO YOU HAVE A COPY YOU CAN SEND ME PLEASE
@mydroidid
3 жыл бұрын
It should be stamped on the rim itself
@FrustratedBaboon3 жыл бұрын
Wow an old video that shows exactly how it's done.
@awsomekill2
3 жыл бұрын
A PhD video, that only Harley Davidson gives to dealers, this is copy right infringement
@DersNoNem5 жыл бұрын
Hweel
@danofboro9008 Жыл бұрын
Why does this does stress on the H
@roncoburn77714 жыл бұрын
There is a lot to it
@sgtrock28212 жыл бұрын
man I'm going to cast wheels. screw these spoke wheels.
@hawesracing14443 жыл бұрын
PhDs
@toncitvrde49712 жыл бұрын
Worstest wheel ewer.. I was happiest man on planet when ill throw them into garbage and replaces with aluminium wheels. Always riding ont the edge with that you newer know when they gonna lose and make wobling... 🤑🤑🤑
@billyflops7981
Жыл бұрын
Their Worth the maintenance.
@sparkyhoraczko5548
Жыл бұрын
Right On X GEN! We took great pride with NO ear pieces, NO rear suspend and spokes to log 500 miles per day. All smiles, NO complaints! Service checks every 2 days or 1K mi. Don't forget your Carbon Fibre Full Fairing! NOMAD....since 65 and still burnin rubber.
Пікірлер: 34
This video was reminiscent of the 80's sex ed videos many were subjected to, super corny, maybe a little uncomfortable at times to watch, but chock full of information. I am working on a 75 Ironhead bobber project and using 16" rims front and back. I was having a devil of a time relacing the rims, partly because I didn't take reference shots before I tore them down, and it had been months between teardown, paint, and relace. As it turns out I have an A and a B style hub so as I moved onto my front rim I couldn't figure out why the pattern wasn't working (and I got lucky on the rear), now I know. Serious props to this video, if you need to lace your rims, this is the holy bible of instruction.
I've got an 82 low rider front hub that I was trying to lace to 19" rim. It didn't have a hub when I got it, so, I had no reference. The service manual is really confusing on lacing this wheel. I'll have to re-read it now to see if it makes more sense. This video was a big help.
The only video I could find that explained this. Very comprehensive and thorough. Many thanks.
the best explanation i found on internet, thanks also to the little man that take many hits
a vhs video as good as the day it was made. Thank hle
I have to do this today at MMI. thanks for the refresher.
Truly the best video i did my spokes
Great video as well! A+thumbs up!
GREAT VIDEO! Thanks!!
EXCELENT!! i appreciate it THIS EXPLANATION!!!!!!!
Great vid
So what happens if you lace a 21" rim to a 19" hub
perfect video thank's
Springer featured here. Hell yea...
Thanks
👌👌👌👌👌
It will never be the same
Have to spoke a new wheel for a pan head ,is there a video I could watch?
DO YOU KNOW WHERE I CAN FIND THE RIM/HUB DIMENSION CHART? OR DO YOU HAVE A COPY YOU CAN SEND ME PLEASE
@mydroidid
3 жыл бұрын
It should be stamped on the rim itself
Wow an old video that shows exactly how it's done.
@awsomekill2
3 жыл бұрын
A PhD video, that only Harley Davidson gives to dealers, this is copy right infringement
Hweel
Why does this does stress on the H
There is a lot to it
man I'm going to cast wheels. screw these spoke wheels.
PhDs
Worstest wheel ewer.. I was happiest man on planet when ill throw them into garbage and replaces with aluminium wheels. Always riding ont the edge with that you newer know when they gonna lose and make wobling... 🤑🤑🤑
@billyflops7981
Жыл бұрын
Their Worth the maintenance.
@sparkyhoraczko5548
Жыл бұрын
Right On X GEN! We took great pride with NO ear pieces, NO rear suspend and spokes to log 500 miles per day. All smiles, NO complaints! Service checks every 2 days or 1K mi. Don't forget your Carbon Fibre Full Fairing! NOMAD....since 65 and still burnin rubber.
Great video as well! A+thumbs up!
@jamesfransz9763
4 жыл бұрын
HD wheel lacking