Пікірлер

• 
  @karthikasamy601823 күн бұрын

  Super 🎉

• 
  @karthikasamy601823 күн бұрын

  🎉❤🎉

• 
  @binarumah2 ай бұрын

  Thank you. I subscribe.

• 
  @umairrafique76283 ай бұрын

  Hi. How do I get in touch with you to discuss working on such a project at scale?

• 
  @mannan19858 ай бұрын

  தேடிக்கொண்டிருந்தேன்...நன்றி. உங்களை எப்படி தொடர்பு கொள்வது?

• 
  @TheGraeme619 ай бұрын

  Many years ago i had to drill out 2 x holes at either end of a 2 metre aluminium pole which fitted through the rotator on a mast for the antennas. The result was as you guess off set holes. A new 2 metre galvaniszed pole arrived yesterday and wondered how i could align the holes accurately as i do not have any jigs and rigs to do it like some of the videos i watched last night . Came across your video and thought ,that looks a good idea. So this morning what i did was ,i had a straight piece of wood to draw a straight line along the pole . I have to make 2 holes either end of pole to line up so the 2 x antennas can lay exactly horizontal with each other. This is important to accurately line up to point at the satellite while tracking its movement . The other reason was we had very high winds which shifted one of the antennas on the pole which put it way out of alignment . Also the aluminium pole was getting crushed as i tightened the bolts. By doing these modifications the antennas will not move out of alignment from each other,which makes it more secure. I have followed your video and made the template and marked the holes with a punch, drilled out the 2 holes at one end . And would you believe it when i put the same drill i used through the holes they lined up ,perfect job done. I am extremely happy that it worked. Now i am away to do the other end of the pole. When i drew out the templete i added a dashed line through where the the holes would be and it line up with the intersection hole in middle of paper templete. Absolutely brilliant idea of yours,wish i had known about this years ago. Thank you for sharing this idea.

• 
  @fa8290 Жыл бұрын

  What part would I look at when attempting to fix and adjust the hook timing on this machine?

• 
  @shabeerahamedbaquir1934 Жыл бұрын

  சார் எனக்கு தென்காசி. விவசாய நிலம் பழைய குற்றாலம் அருகில் 1.38 ஏக்கர். காற்று மூன்று மாதங்கள் தவிர எப்போதும் இருக்கும். போர் 100அடி வரும். உங்கள் காற்றாடி அமைக்க ஆசைப்படுகிறேன். நீங்கள் இதை அமைத்து தர ஆசைப்படுகிறேன். இங்கு வந்து அமைத்து தர முடியுமா?. எவ்வளவு ரூபாய் ஆகும். உங்கள் மொபைலில் எண் வேண்டும். பதிலை எதிர்பார்க்கிறேன். ஷபீர்.

• 
  @me-for-palastine Жыл бұрын

  தாமதத்துக்கு மன்னிக்கவும். விரைவில் விரிவாக பதில் தருகிறேன்.

• 
  @shabeerahamedbaquir1934 Жыл бұрын

  @@me-for-palastine ஆர்வத்துடன் காத்து இருக்கிறேன்.

• 
  @me-for-palastine Жыл бұрын

  @@shabeerahamedbaquir1934 Shabeer Ahamedbaquir 1 month ago ஷபீர் அன்பரே. மிக்க மகிழ்ச்சி. தாமதத்துக்கு மன்னிக்கவும். இந்த காற்றாடியால் 50 அடி முதல் 100 அடிவரை உள்ள தண்ணீரை இறைக்க முடியும். லேசான காற்று இருந்தாலும் போதும். இதனை மலிவு விலையில் தயார் செய்யத்தான் அதிகம் மெனக்கிட்டு வந்தேன். பல்வேறு சோதனைகளுக்கு பிறகு prototype ரெடி. உங்களை போல பலபேர் கேட்கிறார்கள். என்னிடம் வொர்க் ஷாப் இல்லை. ஆகவே இதனை தயாரிக்க நான் வசிக்கும் பூனாவில் ஒரு கம்பெனியிடம் கொடுத்துள்ளேன். பிரச்சனை என்னவென்றால் அவர்கள் மிக மெதுவாக செய்துவருகிறார்கள். அதனால்தான் உங்களுக்கு பதில் சொல்ல முடியவில்லை. இப்போது அவர்களை முடுக்கி விட்டு உள்ளேன்.விரைவில் ஒரு சில மாதங்களில் வரும். சுமார் 35 அல்லது 40 ஆயிரம் ரூபாய் விலையில் வரும். அப்படியே மாட்டி ஓட்டலாம். பௌண்டேஷன் மட்டும் போட்டால் போதும். (டெம்ப்ளட் தருவோம்) அவசியம் தொடர்பில் இருங்கள். 8411008157. ஈமெயில்: [email protected]

• 
  @dr.raficamuhasina7673 Жыл бұрын

  Sir we need your number to contact

• 
  @vaithyanathans5562 жыл бұрын

  Namaskaram. Will you study the wind pattern too for the local wind conditions, so that the pump runs continuously to fill the over head tank to irrigate the crops. How deep the pump can suck water

• 
  @vaithyanathans5562 жыл бұрын

  From the bore.

• 
  @me-for-palastine2 жыл бұрын

  @@vaithyanathans556 Yes ofcourse. I have done that. please read www.radhamuralifarms.blogspot.in

• 
  @humairakhan50632 жыл бұрын

  Machine front sy uncover kerny Ka process bata daen plz

• 
  @chellamsamy60902 жыл бұрын

  👍

• 
  @delaynietabuchi76482 жыл бұрын

  Mister what's the problem with my machine if there's no electrical flow. When I step on the padel it only gives a buzzing sound. And absolutely nothing happening. Please help

• 
  @me-for-palastine2 жыл бұрын

  I am not sure. Buzzing sound indicates current is flowing to motor and it is jammed. Unable to rotate. Only by opening and isolating the motor from machine by removing the belt that you can identify the peoblem.

• 
  @MahaLakshmi-lk1tt Жыл бұрын

  @@me-for-palastine sir my sewing machine 8280 my mother gift machine and my mother not now my sewing machine not working how to find shuttle problem r gear problem

• 
  2 жыл бұрын

  Tks to share!😀

• 
  @vidhyamahesh4272 жыл бұрын

  We have same machine. Hand Bar not working. Didn't move. We will put oil in all parts. Please tell me sir

• 
  @PlugInCaroo2 жыл бұрын

  *Its an awesome invention* ... 👍👍👍

• 
  @viralvideosinmalayalam58202 жыл бұрын

  Narayan alvar

• 
  @viralvideosinmalayalam58202 жыл бұрын

  Hi

• 
  @labuehernandez55242 жыл бұрын

  My singer sewing machine stopped working, it makes noise but doesn't saw! I opened it to see if it was loose belt, but it's not loose! Help!!!

• 
  @me-for-palastine2 жыл бұрын

  Very difficult to suggest something without knowing the exact issue. There could be multiple possibilities. Please isolate the issue one by one. Noise is coming from where ?

• 
  @dhana0392 жыл бұрын

  ஆரம்ப காலத்தில் இருந்தே உங்களது முயற்சி கண்டு வியந்து உள்ளேன்... முயற்சி திருவினையாக்கும் எனும் வார்த்தைக்கு இணங்க உங்கள் வெற்றி கண்டு மனம் மகிழ்கிறேன்... வாழ்க வளமுடன்... உங்கள் சேவை அளப்பரியது... மக்கள் உங்களை கொண்டாடும் காலம் விரைவில் வரும்...

• 
  @me-for-palastine2 жыл бұрын

  Thanks

• 
  @rajendirenshanmugam77962 жыл бұрын

  Sir வாழ்த்துக்கள்🌹🌹🌹. Bore well எவ்வளவு ஆழத்தில் வேலை செய்யும். உங்களை சந்தித்து ஆலோசனை பெற விரும்புகிறேன். நன்றி

• 
  @me-for-palastine2 жыл бұрын

  தற்போது 30 முதல் 50 அடிவரை இந்த காற்றாடி இழுக்கும். ஆனால் காற்றாடியை இன்னும் பெரிய அளவில் செய்யும்போது திறனும் கூடும். இதன் வடிவத்தை அப்படியே பெருக்கலாம் என்பதுதான் சிறப்பு.

• 
  @Smass12342 жыл бұрын

  excellent sir

• 
  @rsskarthikeyanRtr2 жыл бұрын

  could you send the list of video 19 Vertical axis wind turbine epidoes

• 
  @me-for-palastine2 жыл бұрын

  They are in facebook. Kindly go to facebook.com/groups/519702174896073 page and keep scrolling down.

• 
  @Karalmarks_Pvm2 жыл бұрын

  Thanks for your valuable ideas..

• 
  @rameshganapathy54662 жыл бұрын

  How much cost for this

• 
  @me-for-palastine2 жыл бұрын

  Around 25k

• 
  @purushothvadivelu812 жыл бұрын

  Sir Congratulations 👏👏

• 
  @sajubr31712 жыл бұрын

  🤩🤩 thank you sir

• 
  @chellamsamy60902 жыл бұрын

  Soooooper

• 
  @dr.senthilkumar60182 жыл бұрын

  Innovative idea , 👍 Where to get such turbines?? Kindly let me know..

• 
  @me-for-palastine2 жыл бұрын

  I make this and innovated after 4 years of research.

• 
  @gangadaran68352 жыл бұрын

  @@me-for-palastine great work sir how can we get this

• 
  @me-for-palastine2 жыл бұрын

  @@gangadaran6835 Hi I have replied your email. Thanks

• 
  @suyambulingam79822 жыл бұрын

  Well Sir, Your contact phone Number,,,

• 
  @me-for-palastine2 жыл бұрын

  8411008157

• 
  @suyambulingam79822 жыл бұрын

  Thank you.

• 
  @sathiskumar39402 жыл бұрын

  நன்றிகள் பலகோடி ஜயா உண்மையானது கதையாக சொன்னீர்

• 
  @Revisskk992 жыл бұрын

  Sir, you are an inspiration. Thank you for this pathbreaking research. Pls take action to share it at National level. I am also sharing your video at various groups

• 
  @me-for-palastine2 жыл бұрын

  Thank you sir for your kind words. Sure, will try all my best and also seek help for making this aware to as many.

• 
  @chellapandikasimani40612 жыл бұрын

  ஐயா. இதன் விலை விவரம் தேவை

• 
  @me-for-palastine2 жыл бұрын

  ஐயா, இதன் விலை 25 ஆயிரம் ஆகும்.

• 
  @chellapandikasimani40612 жыл бұрын

  @@me-for-palastine நன்றி ஐயா. நான் தற்சமயம் ஓமன் தேசத்தில் பணிபுரிகிறேன். தாயகம் வரும் பொழுது உங்கள் பண்ணையை பார்க்க விரும்புகிறேன். ஒரு காற்றாடி வேண்டும். என்னுடைய பல நண்பர்களுக்கு பகிர்ந்துள்ளேன். நான் தூத்துகுடி மாவட்டம் விளாத்திகுளத்தை சேர்ந்தவன். உடனடியாக பதலளித்தமைக்கு நன்றி ஐயா.

• 
  @me-for-palastine2 жыл бұрын

  @@chellapandikasimani4061 கண்டிப்பாக. எப்போது வேண்டுமானாலும் தொடர்பு கொள்ளுங்கள். [email protected] விளாத்திகுளம் மூலக்கரைப்பட்டி பக்கம்தான்.

• 
  @sakthivelm37582 жыл бұрын

  அருமையான ஆராய்ச்சி .வாழ்த்துகள்

• 
  @sugumaranchinnamayan86062 жыл бұрын

  I need one sir... Contact no pls...

• 
  @iafkan855g2 жыл бұрын

  Nice info... Great work.. missed ur channel... Could have been with ur journey... Grateful..

• 
  @Allegedly2right2 жыл бұрын

  10/10 great work

• 
  @RuchitCreations3 жыл бұрын

  Nice video...tnx

• 
  @mannegill90233 жыл бұрын

  My sewing machine is jammed. I cleaned the bobin pin area. I opened half part of the machine ,the wheel is jammed. The belt is moving but the part after belt is not moving . Please help me . Thanks in advance.

• 
  @amrutaamate80503 жыл бұрын

  Hi sir Apane singer machine ko uper ki plastic costume ko kese khola

• 
  @me-for-palastine3 жыл бұрын

  Good question. I also struggled to open the front cover. This cover is held by a screw and can be approached only from back side. Use a star screwdriver. I have uploaded one bit here kzread.info/dash/bejne/qnaFmZWxfLfdd9o.html Watch this

• 
  @amrutaamate80503 жыл бұрын

  Thank you sir

• 
  @amrutaamate80503 жыл бұрын

  This is an excellent video the first l've found to get inside the machine .could you please explain want to oil once you're inside the machine 🙂

• 
  @me-for-palastine3 жыл бұрын

  @@amrutaamate8050 You can apply a drop of oil on every moving part. No harm having excess oil

• 
  @amrutaamate80503 жыл бұрын

  @@me-for-palastine Thanks sir🙂

• 
  @bikrampratapbhatta97973 жыл бұрын

  Just use some Servo motor and controller and LDR , to make it Auto focus system

• 
  @MastPakistanVlogs3 жыл бұрын

  Nice video good information bro 👍

• 
  @HealthandFarming3 жыл бұрын

  wow..excellent..thank you sir

• 
  @carlosalbertovelascoquirog99573 жыл бұрын

  Excelente idea ...

• 
  @vijayalaxmi89473 жыл бұрын

  Excellent

• 
  @poojaghuli44883 жыл бұрын

  Hello. I have same machine. But my machine not moving means jam huwa hai. What should I do?

• 
  @me-for-palastine3 жыл бұрын

  Just look at the bobbin section. The dirt accumulation happens there only. You donot have to open entire machine.

• 
  @danplunkett42693 жыл бұрын

  Very good, nice short cut to accurate drilling in pipes.

• 
  @mohanr80333 жыл бұрын

  அருமையான செயல் அண்ணா.. வாழ்த்துகள் 💐💐

• 
  @spongedev3 жыл бұрын

  I am so happy to watch this. Thank you sooo much for making a video especially asking to show children. Please keep making such videos sir. I am considering to purchase a sewing machine. Can you suggest me any brands. Is it okay to buy a second hand machine if its cheaper? my options SInger same model, USHA Jenome, Brother. Than you so much sir and best wishes to your family

• 
  @me-for-palastine3 жыл бұрын

  I wish you all the best. Singer is indeed a very old brand. There are other brands also. Commercial tailors use local brands. Household domestic users buy branded ones. New one will cost between 10 to 13 K basic model. In second hand it depends on the seller.

• 
  @louizarabhi24313 жыл бұрын

  Hi, What is your mirrors width?

• 
  @me-for-palastine3 жыл бұрын

  Hi, the mirrors are each 2 cm x 3 cm. Now you can count and multiply by that.

• 
  @me-for-palastine3 жыл бұрын

  My intention was not to cut the mirror into small rectangles. I could have had a long strip of mirror. I earlier did a project on parabolic dish for which I cut the mirrors. Same pieces i used here.

• 
  @louizarabhi24313 жыл бұрын

  Thank you @@me-for-palastine You mean 2 inch x 3 inch, because according to the figure in the beginning and calculations I made, I didn't find same dimensions. you put receiver at what height? it is also calculated?

• 
  @me-for-palastine3 жыл бұрын

  Hi, sorry for delayed reply. Was caught in work. Yes, you are right. I still have those mirrors. Measured. It is 2 inch x 3 inch only. I donot have other measurements because I have recycled those aluminium and wooden frames already. But I can say, there is no hard rule on how high you need to keep the receiver. It has to be as high as possible so that the mirrors need not turn much or when the sun is morning or evening, there is no loss in surface area of reflection due to slanting of mirror. The beauty of reflected sun rays on mirror is that it acts like a parallel coherent laser beam. Distance doesnot matter.