Petrol360 is an outlet to share an automotive passion and a love to create. Building by Preservation - Restoration - Modification and the sky is the limit from there.
Watched a lot of diy shop cabinet videos today, have not liked or commented on any of them ... until this one. Great idea. Best luck to you and your channel.
@cruza128915 күн бұрын
Can someone tell me why does it have to be completely welded in ? Why can’t you just spot weld most of it and then grind back make it flush and then put bondo over it?
@Petrol3609 күн бұрын
If you want it to look nice like it was original you need to but weld the whole seam. If this was under the truck I might overlap the panels. I will still fully weld them out rather then spot weld for strength. Then seam seal to keep moisture out of your repair.
@petercermak409518 күн бұрын
I have a new 38351 Fitech system. The newest interface handheld works flawlessly. I agree that Fitech needs to put out a manual that spells out what each software tuning line item does! Bryan at Fitech has great basic video's, but that's where it ends.
@dfworks223922 күн бұрын
Who welded the frame ? Retarded Frankenstein?
@edwardlocke87425 күн бұрын
Excellent video!
@DavidByers-ii1czАй бұрын
I love the I have " no idea" to the random part you pointed out.
@DavidByers-ii1czАй бұрын
Not sarcastic you did a good job in forethought
@zdavidzzАй бұрын
It kinda looks like those nascar toolboxes you see attached within the outside of those trucks. Pretty badass actually
@TroyKruger-cy9ljАй бұрын
What’s your ignition time in that and advance timing at ? Been having a hard time trying to get my time in.
@kylerasmusson4180Ай бұрын
Interesting idea! You know it can hold the weight, because those drawers full of paper would be crazy heavy. Looks like snapon made it themselves 😂
@sprtsswrd1Ай бұрын
Are you still happy with Radiator? Any issues?
@jdmchickkustomz94172 ай бұрын
Hey that looks sick I love it!! Yeah I'm thinking about how to do mine on my Eclipse thanks for the ideas
@waylonnewton44312 ай бұрын
I think our f100s went to the same body shop originally 😂😂😂
@bumbaladardioshombot2 ай бұрын
How's it going?
@sipzter3572 ай бұрын
Very well done. My complements! I must say I and apparently many others did have that same thought - filing cabinet prices just went UP. Ah well...While walking the dog last week, just down the strett someone put out a Hon four door upright filing cabinet for letter size papers with a FREE sign on it. It is waiting for me to sand it and paint it. I, too, am going to use rustoleum white paint. This is for our business office. Anyhow, I am going to start looking for your style cabinet for my garage becuase I need to clean it up out there. Thank you for the video.
@michaelsurratt95933 ай бұрын
That’s pretty darned awesome
@stevoeight3 ай бұрын
How are they holding up? Only reviews I found on them were pretty poor but reviews don’t tend to be very trustworthy. Probably msd employees writing them to justify their insane prices.
@BrentacusScottson3 ай бұрын
From the inside it sounds like a titan or a silverado.
@thomashendricks97743 ай бұрын
I just stumbled on this video and the timing couldn't be better. I recently moved, at my old house I used an old IKEA dresser as my work bench with tool storage. It was a great way to store tools and it attached two 3/4 plywood to the top as the work table. However like many things that are IKEA, it lasted about 10 years from some serious abuse and wasn't up to be moved when we moved houses. So I tossed it, which I was sad to do because it did make a great work bench. However at my new house, the previous owner installed two work benches and they are solid. However they are only benches without any storage. So I have been looking at getting a cheap dresser for my tool storage. I couldn't find anything decent used for below $100 and below that it was just pure garbage. I didn't consider using file cabinets but I just looked on Marketplace and there are several of the same exact ones for $50 and I found one thats 2x2 with a work top for $100. So I think I know which way I'm going. Thank you for the idea.
@bruceprosser83323 ай бұрын
It really does look great!
@neffk3 ай бұрын
"Nice and CNC'd" Haha. Fit and finish does look great. Thanks for such an in-depth video. I usually double the price and it's fairly close. Worked with a milling machine, too.
@acruz40d3 ай бұрын
Hello, I’m planning to swap my 1987 gxl Rx7 for a 302 mustang engine; I wanted to ask you if you changed the rear end in your car, and if you did, what you swapped it for?
@buttonysquare85013 ай бұрын
The factory sealer on these trucks is terrible and cracks over time. The roof seam will let in water behind the drip rail. The low spot welds where the roof goes over the drip rail will hold water and the rust starts from there. If anyone is restoring one of these I recommend putting body filler in the lows and maybe slope it from the center. One tip is never grind down your welds completely, you can make the flat metal on the sides of your weld too thin. Just grind it halfway and beat it in slightly and bondo over it. You can also lap weld the new sheet metal over the old as long as it’s where the water runs down over the lap and you cut the old rust out.
@SabreCycles3 ай бұрын
Lose the background racket. I don't understand how creators don't feel the irritation?
@yamahaxs65014 ай бұрын
I've got a crown vic swapped 56 chev panel truck and this is just what I need to get it down! Thanks!
@user-qp9xd8up7w4 ай бұрын
Did you have any clearance issues with the Snap on badge?
@Headsup95504 ай бұрын
Why would you use a Crown Vic rear end and not an explorer rear? I hope you either modified the perches for the skinny axle tubes. Are you going to narrow it? The track width has to be way too wide because the explorer unit is perfect for my 69 f100
@iamwoman.hearmeroar.61464 ай бұрын
Oooo. I’d like an update on how well it’s holding up. For example, are to get drawers still sliding well with all your tools in it or did you find that they’re too heavy to hold a bunch of tools?
@cm-ek4ci4 ай бұрын
Has snap on copied this, it’s been a couple of years since this video came out.😊
@TheAkstewie5 ай бұрын
I got one for my race car to control everything with thermal switches so simple and so much cleaner. HALF THE COST OF FUCKING MSD TO
@jmanuelforero38505 ай бұрын
I have got a Pashley Sovereign, and I think that it looked better in a project like this
@brianriggin45605 ай бұрын
Paint looks fantastic. I bought a couple almost 20 years ago for $50/piece. I painted them red with black drawers like my Craftsman 42" bottom box. These bookend each side of my 42" box for a work bench and looked amazingly professional. I love the top slideout drawers. I made slider trays 1/2 the drawer width for all the rest. Store bigger stuff underneath the tray. It's unbelievable how much you can pack in these cabinets.
@Popsplace425 ай бұрын
Ideally, the patch piece needs to bend 90* at the bottom so it sits flat in the bottom of drip rail, and spot weld it in.
@gary82975 ай бұрын
No, it did not we pinning in plug diagram
@gabrielmosaueda73435 ай бұрын
Hi what tope o axe or year do you used
@StatesMusic6 ай бұрын
has the e6000 stuck well? Even in the heat? and freezing winters? worried about that lol
@jhuesmann7 ай бұрын
Does the baking produce a lot of fumes?
@user-hs8qj2fi9y7 ай бұрын
Should of tried lead solder for gutter.
@8luggarage7 ай бұрын
Hows the welder doin
@humberto27227 ай бұрын
Good job my brother 👏🏽👏🏽👏🏽
@ph360617 ай бұрын
Awesome job on the file cabinet I did the same with one from work they were going to toss out. Thanks for sharing video.
@billsenkle17 ай бұрын
Don't worry I'm sure nobody wanted to see the steps in between
@chrishorne82477 ай бұрын
Great job!! I have four 3 drawer lateral file cabinets in my shop/garage. I'm actually going to set them up and incorporate them in a miter saw station. Now after watching this I guess I'm also going to have to paint mine as well to match my red tool boxes!!
@kurtpierchoski29597 ай бұрын
Glad to see someone else welding the load path members into those bumper brackets lol. Have you pulled anything with it yet, and if so, how much weight? I was about to do the same thing because I have a 70s mustang gas tank that stops a few inches shy of the frame members and there is limited room. I was planning to triangulate some secondary tubes to take the tongue load but I was going to drop the receiver under the bumper. My 72 F100 sits at normal ride height and I don't need to punch a hole in the bumper, but I really like the idea of hiding it behind the plate so I think I am going to do it. Glad I saw this video. Nice job!
@lucaslorentz47228 ай бұрын
Fantastic idea! Thank you for sharing. Any updates on what you put into the cabinet??
@moham4948 ай бұрын
Мир вам, мой дядя, я говорю с вами из Марокко, я хочу спросить вас, пожалуйста, ответьте мне, пожалуйста, мир на вас, мой дядя, я говорю с вами из Марокко, я хочу спросить вас, пожалуйста, ответьте мне, пожалуйста
@84fastman8 ай бұрын
I had a problem with this relay triggering fans from the Holley. Kept cutting off relay when fans would activate through the Holley . Dunno if anyone else had had this problem
@tonysantiago31598 ай бұрын
I love the idea, how much does one cost if I buy it from your workshop?
@tonysantiago31598 ай бұрын
I love the idea, how much does one cost if I buy it from your workshop?
@Finaldestroyer8 ай бұрын
No lie this actually looks super nice
@heykid5429 ай бұрын
Cam across this video a couple times and skipped it cause of the thumbnail. I’m like yes right a new snap on tool cabinet like that for cheap? Then I finally decided to watch it and damn thank god I did 😂
Пікірлер
Watched a lot of diy shop cabinet videos today, have not liked or commented on any of them ... until this one. Great idea. Best luck to you and your channel.
Can someone tell me why does it have to be completely welded in ? Why can’t you just spot weld most of it and then grind back make it flush and then put bondo over it?
If you want it to look nice like it was original you need to but weld the whole seam. If this was under the truck I might overlap the panels. I will still fully weld them out rather then spot weld for strength. Then seam seal to keep moisture out of your repair.
I have a new 38351 Fitech system. The newest interface handheld works flawlessly. I agree that Fitech needs to put out a manual that spells out what each software tuning line item does! Bryan at Fitech has great basic video's, but that's where it ends.
Who welded the frame ? Retarded Frankenstein?
Excellent video!
I love the I have " no idea" to the random part you pointed out.
Not sarcastic you did a good job in forethought
It kinda looks like those nascar toolboxes you see attached within the outside of those trucks. Pretty badass actually
What’s your ignition time in that and advance timing at ? Been having a hard time trying to get my time in.
Interesting idea! You know it can hold the weight, because those drawers full of paper would be crazy heavy. Looks like snapon made it themselves 😂
Are you still happy with Radiator? Any issues?
Hey that looks sick I love it!! Yeah I'm thinking about how to do mine on my Eclipse thanks for the ideas
I think our f100s went to the same body shop originally 😂😂😂
How's it going?
Very well done. My complements! I must say I and apparently many others did have that same thought - filing cabinet prices just went UP. Ah well...While walking the dog last week, just down the strett someone put out a Hon four door upright filing cabinet for letter size papers with a FREE sign on it. It is waiting for me to sand it and paint it. I, too, am going to use rustoleum white paint. This is for our business office. Anyhow, I am going to start looking for your style cabinet for my garage becuase I need to clean it up out there. Thank you for the video.
That’s pretty darned awesome
How are they holding up? Only reviews I found on them were pretty poor but reviews don’t tend to be very trustworthy. Probably msd employees writing them to justify their insane prices.
From the inside it sounds like a titan or a silverado.
I just stumbled on this video and the timing couldn't be better. I recently moved, at my old house I used an old IKEA dresser as my work bench with tool storage. It was a great way to store tools and it attached two 3/4 plywood to the top as the work table. However like many things that are IKEA, it lasted about 10 years from some serious abuse and wasn't up to be moved when we moved houses. So I tossed it, which I was sad to do because it did make a great work bench. However at my new house, the previous owner installed two work benches and they are solid. However they are only benches without any storage. So I have been looking at getting a cheap dresser for my tool storage. I couldn't find anything decent used for below $100 and below that it was just pure garbage. I didn't consider using file cabinets but I just looked on Marketplace and there are several of the same exact ones for $50 and I found one thats 2x2 with a work top for $100. So I think I know which way I'm going. Thank you for the idea.
It really does look great!
"Nice and CNC'd" Haha. Fit and finish does look great. Thanks for such an in-depth video. I usually double the price and it's fairly close. Worked with a milling machine, too.
Hello, I’m planning to swap my 1987 gxl Rx7 for a 302 mustang engine; I wanted to ask you if you changed the rear end in your car, and if you did, what you swapped it for?
The factory sealer on these trucks is terrible and cracks over time. The roof seam will let in water behind the drip rail. The low spot welds where the roof goes over the drip rail will hold water and the rust starts from there. If anyone is restoring one of these I recommend putting body filler in the lows and maybe slope it from the center. One tip is never grind down your welds completely, you can make the flat metal on the sides of your weld too thin. Just grind it halfway and beat it in slightly and bondo over it. You can also lap weld the new sheet metal over the old as long as it’s where the water runs down over the lap and you cut the old rust out.
Lose the background racket. I don't understand how creators don't feel the irritation?
I've got a crown vic swapped 56 chev panel truck and this is just what I need to get it down! Thanks!
Did you have any clearance issues with the Snap on badge?
Why would you use a Crown Vic rear end and not an explorer rear? I hope you either modified the perches for the skinny axle tubes. Are you going to narrow it? The track width has to be way too wide because the explorer unit is perfect for my 69 f100
Oooo. I’d like an update on how well it’s holding up. For example, are to get drawers still sliding well with all your tools in it or did you find that they’re too heavy to hold a bunch of tools?
Has snap on copied this, it’s been a couple of years since this video came out.😊
I got one for my race car to control everything with thermal switches so simple and so much cleaner. HALF THE COST OF FUCKING MSD TO
I have got a Pashley Sovereign, and I think that it looked better in a project like this
Paint looks fantastic. I bought a couple almost 20 years ago for $50/piece. I painted them red with black drawers like my Craftsman 42" bottom box. These bookend each side of my 42" box for a work bench and looked amazingly professional. I love the top slideout drawers. I made slider trays 1/2 the drawer width for all the rest. Store bigger stuff underneath the tray. It's unbelievable how much you can pack in these cabinets.
Ideally, the patch piece needs to bend 90* at the bottom so it sits flat in the bottom of drip rail, and spot weld it in.
No, it did not we pinning in plug diagram
Hi what tope o axe or year do you used
has the e6000 stuck well? Even in the heat? and freezing winters? worried about that lol
Does the baking produce a lot of fumes?
Should of tried lead solder for gutter.
Hows the welder doin
Good job my brother 👏🏽👏🏽👏🏽
Awesome job on the file cabinet I did the same with one from work they were going to toss out. Thanks for sharing video.
Don't worry I'm sure nobody wanted to see the steps in between
Great job!! I have four 3 drawer lateral file cabinets in my shop/garage. I'm actually going to set them up and incorporate them in a miter saw station. Now after watching this I guess I'm also going to have to paint mine as well to match my red tool boxes!!
Glad to see someone else welding the load path members into those bumper brackets lol. Have you pulled anything with it yet, and if so, how much weight? I was about to do the same thing because I have a 70s mustang gas tank that stops a few inches shy of the frame members and there is limited room. I was planning to triangulate some secondary tubes to take the tongue load but I was going to drop the receiver under the bumper. My 72 F100 sits at normal ride height and I don't need to punch a hole in the bumper, but I really like the idea of hiding it behind the plate so I think I am going to do it. Glad I saw this video. Nice job!
Fantastic idea! Thank you for sharing. Any updates on what you put into the cabinet??
Мир вам, мой дядя, я говорю с вами из Марокко, я хочу спросить вас, пожалуйста, ответьте мне, пожалуйста, мир на вас, мой дядя, я говорю с вами из Марокко, я хочу спросить вас, пожалуйста, ответьте мне, пожалуйста
I had a problem with this relay triggering fans from the Holley. Kept cutting off relay when fans would activate through the Holley . Dunno if anyone else had had this problem
I love the idea, how much does one cost if I buy it from your workshop?
I love the idea, how much does one cost if I buy it from your workshop?
No lie this actually looks super nice
Cam across this video a couple times and skipped it cause of the thumbnail. I’m like yes right a new snap on tool cabinet like that for cheap? Then I finally decided to watch it and damn thank god I did 😂