Пікірлер

• 
  @Sorarse16 күн бұрын

  Never had a Cox 0.8 but I did have a couple of DC Wasp 0.8. Cracking little engines that powered a few of my early endeavours into model aircraft, both control line (KK Phantom Mite) and free flight (KK Snipe).

• 
  @gdawltonАй бұрын

  I saw that video just after commenting and you're right. It was much better - very cool!

• 
  @gdawltonАй бұрын

  If I may offer, it will help to calm the cl airplane by straightening your control arm. Find where your wrist needs to be for level flight, then if you wish to ascend raise your arm at the shoulder. I was taught this by my dad in the 1970's. Hope it helps.

• 
  @jetlag5542Ай бұрын

  The main issue was an AFT CG … that I forgot to check prior the first flight. Here is the flight with the right CG : kzread.info/dash/bejne/anlq2cGol5y1f6w.htmlsi=XM6F3i5h4PrtoJb9

• 
  @locowerkeАй бұрын

  Great video, and well done! That is a very nice little plane, and i look forward to seeing another video on longer lines!! Thank you for posting your efforts!!

• 
  @user-yi3xf7gv4r2 ай бұрын

  Одыхают мужики, самолёт пускают,точто я как вы честенько запускаем.

• 
  @jims63232 ай бұрын

  Looks like it would like some weight in the nose!

• 
  @jetlag55422 ай бұрын

  Indeed … and it’s written in the video’s description. Look here with the right CG : kzread.info/dash/bejne/anlq2cGol5y1f6w.htmlsi=2FPGDOFjYd2i_-kV

• 
  @thatairplaneguy3 ай бұрын

  Why does there always seem to be that ONE guy always tuning a nitro engine when ever there is a dead stick or possible control issue who is either oblivious or so rude not to shut his engine off for a moment so a pilot can think in peace for a couple seconds?? I fly all forms of power and I don’t tune engines while other engines are flying as a respectful courtesy.

• 
  @jetlag55423 ай бұрын

  You are totally right and i’m totally agree with your argument 💯 🙏🙏

• 
  @Royshanger3 ай бұрын

  Wow what a great pilot I would have crashed for sure.

• 
  @jetlag55423 ай бұрын

  I’m not such a great pilot. I was just lucky by the position where it happen (high and moderate speed) Staying calm is the key for a nice outcome 😊

• 
  @TomislavReskovic3 ай бұрын

  Nicely done! bravo! did you find the cause later? some air buble in air filter or ? restart is nice for save, but always search for cause of the problem because sometimes you can be low, or too slow to make it back to the runway

• 
  @jetlag55423 ай бұрын

  Hey Tomislav, I checked all the turbine data on the Jeti telemetrie and found absolutely no errors UAT was still full of fuel, no air in the UAT … so no clue why it happen 🤷🏼‍♂️

• 
  @user-lu7rh1hw9c3 ай бұрын

  Fantastique !!

• 
  @guglielmofadabini90794 ай бұрын

  How could you get the CG right with the engine all the way in the back? I have built a delta very similar to that one but I had to mont the 0.049 cox at the front otherwise it would have been extremely tail heavy. Did you use any kind of nose weight? Just wandering, thanks for the help .

• 
  @jetlag55424 ай бұрын

  I had to put 60 gr of weight in the nose 🤷🏼‍♂️

• 
  @nakul34244 ай бұрын

  Great flight, did you paint the canopy from the inside with black spray paint?

• 
  @jetlag55424 ай бұрын

  Thks 😊 Yes, That’s exactly what i did … paint from inside

• 
  @AlejandroFernandezDaCosta5 ай бұрын

  It is more efective than 1 liter of vodka

• 
  @jetlag55425 ай бұрын

  😂😂😂

• 
  @earllsimmins93736 ай бұрын

  Why I like UC more than RC is you rarely crash more than 50 feet away from where you're standing😢😂

• 
  @ych70646 ай бұрын

  Perhaps the plane is lacking the 'reflex' setting for the elevons: a default small up deflection as their zero position. usually about 5° up

• 
  @jetlag55426 ай бұрын

  In fact, the engine stopped exactly at the time of launch.

• 
  @giovannimotteran96676 ай бұрын

  È sempre stato un mio sogno averne uno, di quelli fatti da Zanin.

• 
  @DailyFS19956 ай бұрын

  Brilliant❤

• 
  @jetlag55426 ай бұрын

  Thanks 😊 it’s only a draft …

• 
  @michelvanschaeybroeck48036 ай бұрын

  Super!

• 
  @jetlag55426 ай бұрын

  Merci Michel 😊 Ce n’est qu’un brouillon, la vidéo définitive sera beaucoup plus dynamique. Ça sera pour la saison 2024 🥳

• 
  @remicallant87566 ай бұрын

  Nice video, thanks, Remi, Belgium

• 
  @jetlag55426 ай бұрын

  Thank you too! This video is just a draft …

• 
  @elcotorro7 ай бұрын

  Maravilloso, saludos desde Jalisco México

• 
  @jetlag55426 ай бұрын

  Saludos desde Brusselas Belgium 🇧🇪

• 
  @davidfirth65357 ай бұрын

  Brilliant!

• 
  @JP-ij6gf8 ай бұрын

  Awesome

• 
  @christopherknee57568 ай бұрын

  When I was still in high school (1976), I built a delta wing, pusher engine Cox TD 051, 2 channel Rc plane. It had a foam wing and balsa fuselage and it looked almost exactly like what you built. When I got to try and fly it, I decided to not trust some other idiot to hand launch my plane, so I did it myself. I had built in a small skid under the wing to hold on to to throw the plane but it was difficult to get a good grip with the oil and smooth surface. The net result was a stall and nose dive. The damage was a broken nose in front of the wing. I suspect that it must have been too heavy and the elevons too small to handle a slow launch. Yikes. History DOES repeat itself! I never got to repair or try that plane out again. I regret that I never gave it another go. In my mind, I had categorized this plane as a "not such a good idea" or "not a reliable idea" and just left it at that. You cannot believe how much I was rooting for your Foamie Delta to fly well, only for it to be as unsuccessful as mine was all those 47 years ago! Oh, well. Please tell me you will try it again!

• 
  @earlwheelock78448 ай бұрын

  I just just got done flying a buster with a fox 35 stunt on 52ft lines, flew fine , BUT I DIDNT THINK THAT ENGINE WAS EVER GOING TO STOP , I was staggering around all over that field, I also fell on my A$$ when it FINALY quit . ( I am now 80 and hadnt flown C/L since the early 1970s ) I think I remember BARFING too!!! 😝😝😝😝😝😝🙁🙁😮😮😆😆😆

• 
  @suokmi8 ай бұрын

  Is this Nobler flying in your video really built from a Svenson kit or did you only mean that Svenson has made Nobler kits? I have seen only Top Flite Noblers (Aldrich and Gieseke), but I know that there has been Svenson kits available, too. I think they're rarities, at least they have not been available here in Finland, although the other Svenson kits were quite common in the 70's and early 80´s.

• 
  @jeflemmens95698 ай бұрын

  Pilot Jan Odeyn , Dutch comment Marc Berckmans

• 
  @nilosantos48628 ай бұрын

  Such terrific video remember me in childhood u control plane thanks

• 
  @jetlag55428 ай бұрын

  The problem was a AFT CG that I forgot to check before the first flight 🫣

• 
  @michelvanschaeybroeck48038 ай бұрын

  Pour cuire les sausisses.

• 
  @jetlag55428 ай бұрын

  Claire qu’il chauffe bien celui la 🤪🤪

• 
  @TomislavReskovic8 ай бұрын

  Every winter you tease us :) When will it fly and what model would you choose/make? Some delta? I have one also from HK but never got to fly it

• 
  @jetlag55428 ай бұрын

  no model choose yet, but i would go for an RC one and in that case a fuel pressure regulator is required (that I dont have yet) And the other problem is, here in Belgium, the use of Pulse Jet is completely prohibited by law. (because of the noise)

• 
  @Franky46Boy8 ай бұрын

  Very realistic. Both visual as in flight.

• 
  @tedsmith61378 ай бұрын

  A Symphony of Sound!

• 
  @BetterAircraftFabric8 ай бұрын

  nice old beast !

• 
  @GaryFlymore9 ай бұрын

  I jove nitro DF Jets! please post all the videos you got Sir! God Bless***** Gary Flymore

• 
  @hinkepank12399 ай бұрын

  Hi, I made this plane some years ago from a plan on the internet. I put a 3000KV inrunner and a 30A ESC in it. 2 cell LiPo and it was really fast, creating a very high noise. Fun to fly !

• 
  @andrslnks480410 ай бұрын

  Wundervolle Musik

• 
  @AmpAbuser10 ай бұрын

  That was fun thank you for sharing. Try an APC 4.4x4E prop much better speed and tune will sing. Here is one of my Cox TD .051 using a APC modified to 4.3x5.5N kzread.info/dash/bejne/Ynis2NNyiNrUito.html

• 
  @jetlag554210 ай бұрын

  Thanks for the advise, i have a 4,7x4,7 I will try it

• 
  @Fishbone4u10 ай бұрын

  Beautiful flying field! Great looking plane, but really squirrelly! I'd crash immediately!

• 
  @jetlag554210 ай бұрын

  It was the maiden flight and I forgot to check the CG who was to aft. Has been corrected since -> kzread.info/dash/bejne/anlq2cGol5y1f6w.htmlsi=ZP_rWtuOgxodrzuS

• 
  @Berylou7311 ай бұрын

  Bravo, vous êtes courageux de continuer le VCC, je vois qu'il y a d'autres avions au parking? super un ancien de F2B en France

• 
  @roccoc6237 Жыл бұрын

  Great flying and nice jet. I also have an ultra and was wondering how long is the field you’re flying on?

• 
  @jetlag5542 Жыл бұрын

  Check this one : kzread.info/dash/bejne/dIRoppONfaqwhdY.html The airfield is 240 m long And totaly free of obstacle in any direction

• 
  @TomislavReskovic Жыл бұрын

  Bravo!!!!!!

• 
  @rolandscheurwater2001 Жыл бұрын

  Can’t wait! Beautiful airplane! Love the finish

• 
  @TomislavReskovic Жыл бұрын

  niceeeee :)

• 
  @remicallant8756 Жыл бұрын

  Nice plane and airfield, greetings from Remi from Belgium

• 
  @rafjum Жыл бұрын

  I've always loved the Svenson models and now I get to know the founder! that's fills me, Thank You very much M. Janssens I love your models and especially the Fieseler Storch!!

• 
  @castlefranck3979 Жыл бұрын

  swap to valach engine

• 
  @jetlag5542 Жыл бұрын

  Maybe one day

• 
  @micheldriessen5081 Жыл бұрын

  8 circles in 21 seconds = 69 km/h ... Did not count arm's length, makes 77 km/h. Perhaps 3-blade with less pitch ?

• 
  @jrhawk574 Жыл бұрын

  FUEL. ?? CARBURETOR ?? SERVO. ??

• 
  @jetlag5542 Жыл бұрын

  E98 mix 2,5 % oil Walbro Savox 1256 TG everywhere

• 
  @daleevans32502 жыл бұрын

  A great looking model. Tone down the elevator response and it will fly as well as it looks.

• 
  @jetlag55422 жыл бұрын

  Thks Dale, I will do 👍🏻

• 
  @jetlag55427 ай бұрын

  Main issue was AFT CG 😬

• 
  @daleevans32502 жыл бұрын

  Brings me back to the early 60's when I loved 1/2A Scale Control Line. My first engine powered model was a Scientific Models Biplane powered by a Cub .049. My AMA number was 0429.

• 
  @remicallant87562 жыл бұрын

  Very nice done, I have the same at home in magenta scheme with P90 from JetCat, complete ready for the maiden flight, congratulations from Remi from Belgium