Пікірлер

• 
  @horaziohorazio6 күн бұрын

  This was veeeeery usefull!!!! Thanks a lot... greetings to your parents ;)

• 
  @Cyberpunk900010 күн бұрын

  WTF how did that cymbal do that?????

• 
  @vit9dobroАй бұрын

  🤙💔🫡

• 
  @kymlittlefield4389Ай бұрын

  Please tell me y’all have figured out about Mother Ducker. You can Sidechain without a workaround.

• 
  @tetkiktedavi1674Ай бұрын

  Kinda new to grooveboxes and to M:C and by halfway thru, I was already going "wow, you can do that?" What a neat little device! Nice video, thanks!

• 
  @looprovisation12352 ай бұрын

  This is lovely. How did you get that pumping effect going on the iPad synths?

• 
  @umonox2 ай бұрын

  Hey. Thanks man :-) I've used Pumphouse as a Plugin on the corresponding Channels in AUM. Quick and dirty so to say ;-)

• 
  @looprovisation12352 ай бұрын

  Thanks for the reply man! Another quick question for you, were you able to get program changes happening on the iOS synths when you change patterns on the DT? For example Pattern 1 on the DT plays a selected preset on an iOS synth, then pattern 2 on the DT automatically triggers a change to another preset of an ios synth ? Can’t seem to figure it out….

• 
  @umonox2 ай бұрын

  @@looprovisation1235 Havent tried this out, but in AUM you have so called "Preset Load Actions". Here you can drop a couple of presets from the AUv3 into the List and from there you can assign a Program Change Number to every preset. I assume that it might work that way. Give it a try and let me know if it worked, will ya?

• 
  @meskahmusic3 ай бұрын

  This is a joke just a volca a verb, mad stuff :)

• 
  @tribeoflife10463 ай бұрын

  cool vid bro, getting mine soon and selling the maschine, let's colab, very simple and straightforward, liking it alot

• 
  @dodgedforgottenn4 ай бұрын

  With the firmware now on V3, it would be really interesting to know how much better the TR-8S stacks up than it did five years ago

• 
  @monatooo4 ай бұрын

  4:14 pleasurekraft - tarantula? :))

• 
  @vyrvygora5 ай бұрын

  This was invaluable to my learning of the Model Cycles. Thank you so much!

• 
  @jonniewalsh11055 ай бұрын

  Great vibe.

• 
  @optuyiamusic58875 ай бұрын

  hi, can you make a whole track?

• 
  @diegotasis6 ай бұрын

  Great video, nice to see how you make the pattern and the jam too. Cool swing trick

• 
  @optuyiamusic58876 ай бұрын

  Hallo.you can do a whole track 

• 
  @FUNKINETIK6 ай бұрын

  Love my Minimal Techno, this feels so good. Just got a Drumbrute yesterday, hooked it up with my Minibrute 2S (they are so made for each other). Went through the steps shown in the video and yeah sounds great. So nice to transition between patterns I’ve previously made on the 2S and add variations. Thanks for a brilliant tutorial, it has really helped me. : )

• 
  @elkin18888 ай бұрын

  is it possible to buy the project? in the website there only the track in mp3m .......thnks!!!!

• 
  @tendingtropic77788 ай бұрын

  tnx for this

• 
  @Tptkk8 ай бұрын

  Great explanation. As a last step I would recommend to resample the track to free the LFO again.

• 
  @BarbesDub9 ай бұрын

  top of the top !!!!

• 
  @Pastryarchy9 ай бұрын

  Sick

• 
  @falk3nn10 ай бұрын

  epic 🔥

• 
  @dingdong756210 ай бұрын

  What the hell is so great about this device? A pointless display, very short recording time, only 4 tracks? Every better app can do more and costs almost nothing! This is a typical device for people whose parents shove everything up their asses! And why are you fidgeting senselessly with your hands over the thing all the time? Do you have ADHD? 😂

• 
  @pavlosmacdonald-kosmidis730210 ай бұрын

  This is the best tutorial yet I have seen on the model:cycles, thank you. I love this jam..!

• 
  @michaelbell902610 ай бұрын

  Hi, thanks for the vid it's a godsend :) I set it up almost the same, but sending audio from A4 into DT. I still get delay and reverb sends but no chorus. I was having some gain issues the other way around. Program change just works, simply set the auto channel to the same number, send from DT and receive on A4. Don't even need to turn on the program potentiometer on a midi track in the SRC page or put down a trigless trig. I just change patterns on the DT and the A4 follows. Hope it keeps working, i'm on the latest OS for each machine. Thanks again.

• 
  @1696Nick10 ай бұрын

  Hi, I'm trying to follow along with this video but I'm on the OP-1 Field so it's a bit confusing, the names of the kits are different. So I'm trying to get that same first kick you use from the Bronze Drum Kit but am unable and unsure how :(

• 
  @dingdong756210 ай бұрын

  Take any other Kick, they all Sounds crappy 🤪

• 
  @thenakedandfamousS10 ай бұрын

  xD

• 
  @manganoiser11 ай бұрын

  wow! really great video! Learned a ton, thanks so much! love the mute trick especially! great jam too!

• 
  @hardgainer739611 ай бұрын

  Hi, nice setup. Im goin to get an ipad for my digitakt, can you explain a bit how are the two connected and synced? the mix is happening in ipad?

• 
  @LB-pp7pu11 ай бұрын

  Hello, this video was great, thanks! Do you think the Digitakt samples reproduction sounds somehow "flatter" than the Tr8s? I fell like hearing a stronger transient response on the comparison between 4:16 and 4:27. I've put the reproduction in mono to "cut" the stereo sample on the Tr8s

• 
  @dandna185511 ай бұрын

  Beautiful beat man

• 
  @daveedwards874 Жыл бұрын

  What connections are you using for midi in to iPad? Just usb and camera adapter? And how are you recording audio?

• 
  @beesting6135 Жыл бұрын

  TR8S

• 
  @bentropy Жыл бұрын

  I'd love more vids on the Analog4, but especially more advanced workflows and tips/tricks (LooPop made a pretty good tutorial on its MIDI Map function, but perhaps you have something to add)

• 
  @neonjams Жыл бұрын

  Great jam, just discovered your skills on yt. Directly subscribed.

• 
  @agustinbernal2760 Жыл бұрын

  Both machines sound amazing! What I love about the Digitakt is the size, the Tr8s is too large for my live setup

• 
  @jm-ti9xo Жыл бұрын

  This isn't techno, not even minimal

• 
  @cooksoni.a26 күн бұрын

  It always kind of blows my mind how so many people that make genre tutorials with hardware on youtube have no idea what the genres theyre trying to emulate sound like

• 
  @GolabKitsForTR-8s Жыл бұрын

  Thank you great video😊

• 
  @ArhatGraviton Жыл бұрын

  Awesome actually ;-)

• 
  @suntzu6122 Жыл бұрын

  Can never have too much sidechain lols

• 
  @e-conrecords4665 Жыл бұрын

  Can’t you detune the sub & second osc to create chords from one voice?

• 
  @beesting6135 Жыл бұрын

  TR8S is King

• 
  @tylon2999 Жыл бұрын

  The comparison makes little sense, one is a drum machine and the other is a groove box.

• 
  @alekseigendron6104 Жыл бұрын

  do you have a video or could you explain how you setup the Tr 8s to work with Ableton via USB? I cannot seem to get it working to record. I currently have an audio interface, but I would like to be able to record all the channels indiviually. For reference I do have a windows computer, with Live 10. I am not sure if that affects it or not.

• 
  @axelcodr Жыл бұрын

  moaaaaar OP PLZ :D

• 
  @axelcodr Жыл бұрын

  great video but If it's not too much trouble I and many other nabs out there would appreciate if you could show your synth settings and drums for the jam. like what synth engine, if you used extra samples or LFOs (incl settings) or any fancy effects. I would LOVE to listen and improvise on your jam with my own op :D

• 
  @drewshannon Жыл бұрын

  Love the trick of dropping a drum hit into the synth sampler to make it more musical

• 
  @daniel_subramaniam Жыл бұрын

  Great track :) I would really like to better understand how that emulated side chaining and the p lock sliding works.

• 
  @thisisjasonzimmermann Жыл бұрын

  Second that! Would love to learn more about those techniques.

• 
  @JamesBermingham Жыл бұрын

  There’s a major bug with the Roland TR8s regarding Program Change over midi. Although it may not be important to most single users of the TR8s, if you plan on syncing it up as either master or slave, the following bug is Still present on the machine. The BUG is When either sending or receiving a Program change message via a midi clock, the TR8S slightly lags behind when the program change is executed. Yet when a program change is made manually on the TR8s, there is no problem. It’s been a real pain for me, because the machine itself is amazing.

• 
  @Dj.tik-tok Жыл бұрын

  I'm completely new with the digitakt and you an amazing amount info which is great, just a little too fast for newbies like myself, I realise you are more like an expert, but could you slow down your tutorials so we can understand what's going on, sorry to complain ❤