Solid content! I am new to super 8 film world and would like to know more about it. I recently bought my own super 8 and the view finder has some fungus and would love to clean it my self. Would it be possible for you to list the tools you used on this video? Cheers!
@astore37572 ай бұрын
Hello, is it possible tu insert a diode to put a new battery 1.5v? Positive is face out?
@robertlambert47062 ай бұрын
spent an hour trying to rethread the lens back into the camera body, looks like it took you no time at all, eventually I just gave up. Was there any trick to screwing the lens back into the camera?
@m3ll0f3ll02 ай бұрын
diggin this song tho
@user-hh6nm7tg1o4 ай бұрын
WTF?
@IncognitoChild6 ай бұрын
I owned one of these new, back in the day! I seem to remember that the phono sockets were always tight when I plugged cables in. It was almost like the sockets were slightly oversized. this may be the reason why you found some broken on this unit. Heat wise it is a poor design - I regularly found quite literally components desoldering themselves! Sound-wise, paired with the M85, it sounded glorious. Regardless of how difficult the room furnishings/acoustics were, the parametric controls could fine-tune out any problems
@crownretro6 ай бұрын
After popping off the label ring & unscrewing the tiny almost-hidden screw, I can't get past unscrewing the front shroud I've spent hours trying to unscrew it... even purchased a proper rubber tool and still can't loosen it Anyone have any tips?
@brejanephoto6 ай бұрын
Does anyone have a link to a repair shutter for the canon 814 auto zoom 🙏
@EnriqueGamezMenendez-fr8sz7 ай бұрын
Hi! Thanks excellent information, just one doubt: how exactly do you remove the front ring the cosmetic one, you mentioned that with tweezers but I’m stuck in this point, in all mi Leica lenses this part usually come of with my rubber tool and turning the thread or with a small screw under it please help! And thanks!
@prematureYeet7 ай бұрын
Hey it’s usually glued on, so you need to be very carful to remove it, you could try using a hair dryer to melt the glue or some type of alcohol
@EnriqueGamezMenendez-fr8sz6 ай бұрын
Nop! I couldn’t do it, I tried the same Method’s u plus a little alcohol and acetone with no success, I don’t know if there is an special technique to do it 🤨
@jacobgarcia35827 ай бұрын
i just purchased one of these, and bought two 625 wein batteries for the light meter, but i can’t seem to get the light meter to work, any ideas on a fix?
@Microbit08 ай бұрын
Man you need to post more stuff you do a really nice work
@Microbit08 ай бұрын
Jeeezzz youtube needs to promote this kind of channel instead of the Kardashians, onlyfans, and other stuff that is absolutely not important. Let's promote this.
@Microbit08 ай бұрын
Hey man this was amazing! You should do a video explaining everything step by step for the mortals who only dream about doing this kind of stuff
@pernilsson25128 ай бұрын
The Glue on Transistors 149 and 150 has to go it will become conductive and short out the 4.7 resistors I can see they are covered in glue
@pernilsson25128 ай бұрын
Monster cable go on tight then when you try to remove them the connector comes off Common issue
@proudkhongrungphakorn792511 ай бұрын
What’s kind of screw fit for the middle one?
@hamishdow218811 ай бұрын
took the first 3 screws out but i cant get the cap off the focus lens and it appears to be fixed down with adhesive, any suggestions on how to get it unstuck
@johnsharaf6736 Жыл бұрын
I was concerned lately that the old "hot breath" method of lubricating the optical surface for cleaning was passe, or even "wrong", because none of the manufacturers recommend that practice. Instead they want to sell you some expensive concoction or impregnated tissues. A Google search recommended AGAINST this technique, but I was not convinced. Understand that I'm a Cinematographer and I'm mostly concerned with the front elements of lenses that cost as much as $40K or even $100K for zooms. I am greatly reassured by your empirical example in continuing to clean lenses with my own hot breath; I've found that it is still the best method, even for oily finger prints. FYI, I learned at the same time (early 70's) to use "nose grease" to lubricate tight lens mounts (especially CA-1 mounts on Eclair NPR's).
@LowQySim Жыл бұрын
is that a foam the white thing ??
@thefilmwave Жыл бұрын
Was the knife a prop for interrogation.. in case it didn't work?
@ceneblock Жыл бұрын
EDIT: digikey part number: 36-105-2-ND --- Can you post the digikey part number? I just got my leicaflex in and it needs the EXACT same fix. I opened up the battery compartment and the terminal just popped out.
@rodmcfarlane1349 Жыл бұрын
I just wanted to say how useful this was to me. My summicron belonged to my dad and I would never have dared to take it apart if not for you showing us the way! Many thanks!
@henryatkinson1479 Жыл бұрын
Whats the DigiKey part number for the contacts that you used? EDIT for anyone else with the question, I think its 36-105-2-ND, ordering some to try myself.
@scottjackson5835 Жыл бұрын
Just a little advice, warm water may produce balsam separation. I personally ruined a Rokkor 57 f1.4 using warm water. So just be careful.
@markmlinar1511 Жыл бұрын
Thanks, mine is dropping a channel. I'll peek inside and hope I see a bad cap or something. I'm no electro hero, but motivated by the Talking Heads!
@guilhemfavatier Жыл бұрын
Hey, I do have dust or stuff in my camera lens (I mean when I put my eye in the scope, I can't see anything or the image is very dark) I don't think the lens is dirty but may be the upper part of the camera is full of dust ? do you have any recommendations ? thanks
@jayhawk7323 Жыл бұрын
What model ifixit kit is that?? I think they have the Mahi, Mako, etc... This video was very instructional. Thanks for posting it. I bought one of these Canon Zoom 518 Super8 cameras on eBay yesterday. The outer plastic lens bezel is bent. This video really explained well how you disassemble it. When my camera arrives later this week, I plan to follow your video and disassemble it. I hope I can bend it into shape. I will also clean the lens pieces once it is apart. Thanks!!
@vertical.poetry Жыл бұрын
Nice handiwork !
@dalehammond1749 Жыл бұрын
Love Canon! Their cameras were very expensive and made to be repairable. Great video, you answered my questions. Thanks
@jetthepanda Жыл бұрын
Great looking table! I'm really curious as to how your handmade carbon bike is holding up 6 years later? Did the frame survive? Did it have any problems?
@prematureYeet Жыл бұрын
Still works great! I ride it through the winters in Toronto
@jetthepanda Жыл бұрын
@@prematureYeet wow. I'm really impressed. You should do a short update video about it! I'm sure lots of people would love it.
@CryoftheProphet Жыл бұрын
Your breath is creating pure h20 to condensate on the lens, its fine, and it will not spread around a thin film of oil the way alcohol does.
@marcoroghi8477 Жыл бұрын
Thanks very ,this video served me a lot
@solderball3017 Жыл бұрын
Fantastic repair! I've never seen such chonky capacitors before. You take your life into your hands working around those! Looking forward to the next video.
@prematureYeet Жыл бұрын
For everyone asking, I still ride this bike and have had no problems with it
@SuperPatyg Жыл бұрын
Plz share a video on the cycle...
@LeenksBarrow Жыл бұрын
why you dont recording video then u ride?
@jcpinon3228 Жыл бұрын
Can you use it on trail riding?
@Relaxing137 Жыл бұрын
Then why didnt you film ot yet
@wydracon Жыл бұрын
Prove it
@jetthepanda Жыл бұрын
2022 bike still whole? still alive?
@RicardoRodriguez-mh7my Жыл бұрын
How much did the frame weigh afterwards?
@user-ic5vv3rm5f Жыл бұрын
Hello. What happened to the styrofoam inside after it was completed?
@chrisgenovese8188 Жыл бұрын
i had the same idea. i would really love to know how this held up, and what you would do differently, etc!
@prematureYeet Жыл бұрын
I’m still riding it today! I would use a larger compression wrap on the carbon fibre when it’s curing. In this video I used electrical tape wrapped sticky side out, I would try to find some 3” wide tape if I was to do this again
@chrisgenovese8188 Жыл бұрын
@@prematureYeet right on, thanks for the response! I'll keep that in mind.
@VIJAYzk Жыл бұрын
@@prematureYeet WOW Man. it should be a pride to ride that bike huh.
@gsantar Жыл бұрын
Zeiss liquid ( optical shops) soak for a while and then wipe, best of all.
@silvershadow797 Жыл бұрын
where is the second part
@kumquat9928 Жыл бұрын
Hello! My camera (318 zoom) has the opposite issue where the focus ring refuses to budge and the ring slid off after trying really hard to turn it :(( Any ideas on what to do? I was tempted to try WD40 on the outside but that feels too risky lol
@prematureYeet Жыл бұрын
You should be able to remove the lens the same way i have in this video, it sounds like something is jammed inside the ring
@anarivera6392 Жыл бұрын
Hey , I just got the canon 518 but it has baterry corroison on the battery compartment at the top and im afraid it wont work. What are the chances it works if i clean it out? To my point of view it seems liks it's probably damaged but im not sure.
@prematureYeet Жыл бұрын
Hey hey, battery corrosion probably won’t affect the camera that much. Just make sure you clean the battery contacts.
@anarivera6392 Жыл бұрын
@@prematureYeet Thank you !
@oliverjack37622 жыл бұрын
Hey, I've just picked up one of these cameras and there is a triangle of metal inside the zoom portion of the lens. I can't quite tell if it is intentional or not. It almost looks like an aperture blade, but is fixed to a ring of metal that goes around the circumference of the inside of the lens. Do have this on your camera?
@prematureYeet2 жыл бұрын
Hey I noticed this on my camera too, its completely normal and shouldn't affecting filming
@oliverjack37622 жыл бұрын
@@prematureYeet nice one, thanks for letting me know!
@Big_Bump2 жыл бұрын
Good song
@magpet2 жыл бұрын
Hello! I have the Canon 518 SV super 8-camera with a really corroded battery compartment. Do you know how to remove the handle for a deep clean? Note that this is the SV version with a firm grip :D
@manningallen-scott35082 жыл бұрын
Hey there! I’m looking to purchase an 814 that has a bit of spider web mould, and think I might dissasemble the lens and give it a clean. Do you have any experience with 814s and do you think it would be similar? All good if you have no idea! Thanks ☺️
@prematureYeet2 жыл бұрын
Hey hey, it should be almost the exact same process. The 814 just has a deeper zoom lens. I have another video where I clean the mold out of a Leica lens, check that video out. Soapy water will probably be your best bet.
@conormatthews89212 жыл бұрын
Hey! Was this on the canon 518? Oh, and did you use any settings on the camera to expose correctly form 500T?
@prematureYeet2 жыл бұрын
This was actually done with a the Braun Nizo 148 & 500T. My camera overexposed the film a lot, but 500T works really well overexposed.
Пікірлер
Solid content! I am new to super 8 film world and would like to know more about it. I recently bought my own super 8 and the view finder has some fungus and would love to clean it my self. Would it be possible for you to list the tools you used on this video? Cheers!
Hello, is it possible tu insert a diode to put a new battery 1.5v? Positive is face out?
spent an hour trying to rethread the lens back into the camera body, looks like it took you no time at all, eventually I just gave up. Was there any trick to screwing the lens back into the camera?
diggin this song tho
WTF?
I owned one of these new, back in the day! I seem to remember that the phono sockets were always tight when I plugged cables in. It was almost like the sockets were slightly oversized. this may be the reason why you found some broken on this unit. Heat wise it is a poor design - I regularly found quite literally components desoldering themselves! Sound-wise, paired with the M85, it sounded glorious. Regardless of how difficult the room furnishings/acoustics were, the parametric controls could fine-tune out any problems
After popping off the label ring & unscrewing the tiny almost-hidden screw, I can't get past unscrewing the front shroud I've spent hours trying to unscrew it... even purchased a proper rubber tool and still can't loosen it Anyone have any tips?
Does anyone have a link to a repair shutter for the canon 814 auto zoom 🙏
Hi! Thanks excellent information, just one doubt: how exactly do you remove the front ring the cosmetic one, you mentioned that with tweezers but I’m stuck in this point, in all mi Leica lenses this part usually come of with my rubber tool and turning the thread or with a small screw under it please help! And thanks!
Hey it’s usually glued on, so you need to be very carful to remove it, you could try using a hair dryer to melt the glue or some type of alcohol
Nop! I couldn’t do it, I tried the same Method’s u plus a little alcohol and acetone with no success, I don’t know if there is an special technique to do it 🤨
i just purchased one of these, and bought two 625 wein batteries for the light meter, but i can’t seem to get the light meter to work, any ideas on a fix?
Man you need to post more stuff you do a really nice work
Jeeezzz youtube needs to promote this kind of channel instead of the Kardashians, onlyfans, and other stuff that is absolutely not important. Let's promote this.
Hey man this was amazing! You should do a video explaining everything step by step for the mortals who only dream about doing this kind of stuff
The Glue on Transistors 149 and 150 has to go it will become conductive and short out the 4.7 resistors I can see they are covered in glue
Monster cable go on tight then when you try to remove them the connector comes off Common issue
What’s kind of screw fit for the middle one?
took the first 3 screws out but i cant get the cap off the focus lens and it appears to be fixed down with adhesive, any suggestions on how to get it unstuck
I was concerned lately that the old "hot breath" method of lubricating the optical surface for cleaning was passe, or even "wrong", because none of the manufacturers recommend that practice. Instead they want to sell you some expensive concoction or impregnated tissues. A Google search recommended AGAINST this technique, but I was not convinced. Understand that I'm a Cinematographer and I'm mostly concerned with the front elements of lenses that cost as much as $40K or even $100K for zooms. I am greatly reassured by your empirical example in continuing to clean lenses with my own hot breath; I've found that it is still the best method, even for oily finger prints. FYI, I learned at the same time (early 70's) to use "nose grease" to lubricate tight lens mounts (especially CA-1 mounts on Eclair NPR's).
is that a foam the white thing ??
Was the knife a prop for interrogation.. in case it didn't work?
EDIT: digikey part number: 36-105-2-ND --- Can you post the digikey part number? I just got my leicaflex in and it needs the EXACT same fix. I opened up the battery compartment and the terminal just popped out.
I just wanted to say how useful this was to me. My summicron belonged to my dad and I would never have dared to take it apart if not for you showing us the way! Many thanks!
Whats the DigiKey part number for the contacts that you used? EDIT for anyone else with the question, I think its 36-105-2-ND, ordering some to try myself.
Just a little advice, warm water may produce balsam separation. I personally ruined a Rokkor 57 f1.4 using warm water. So just be careful.
Thanks, mine is dropping a channel. I'll peek inside and hope I see a bad cap or something. I'm no electro hero, but motivated by the Talking Heads!
Hey, I do have dust or stuff in my camera lens (I mean when I put my eye in the scope, I can't see anything or the image is very dark) I don't think the lens is dirty but may be the upper part of the camera is full of dust ? do you have any recommendations ? thanks
What model ifixit kit is that?? I think they have the Mahi, Mako, etc... This video was very instructional. Thanks for posting it. I bought one of these Canon Zoom 518 Super8 cameras on eBay yesterday. The outer plastic lens bezel is bent. This video really explained well how you disassemble it. When my camera arrives later this week, I plan to follow your video and disassemble it. I hope I can bend it into shape. I will also clean the lens pieces once it is apart. Thanks!!
Nice handiwork !
Love Canon! Their cameras were very expensive and made to be repairable. Great video, you answered my questions. Thanks
Great looking table! I'm really curious as to how your handmade carbon bike is holding up 6 years later? Did the frame survive? Did it have any problems?
Still works great! I ride it through the winters in Toronto
@@prematureYeet wow. I'm really impressed. You should do a short update video about it! I'm sure lots of people would love it.
Your breath is creating pure h20 to condensate on the lens, its fine, and it will not spread around a thin film of oil the way alcohol does.
Thanks very ,this video served me a lot
Fantastic repair! I've never seen such chonky capacitors before. You take your life into your hands working around those! Looking forward to the next video.
For everyone asking, I still ride this bike and have had no problems with it
Plz share a video on the cycle...
why you dont recording video then u ride?
Can you use it on trail riding?
Then why didnt you film ot yet
Prove it
2022 bike still whole? still alive?
How much did the frame weigh afterwards?
Hello. What happened to the styrofoam inside after it was completed?
i had the same idea. i would really love to know how this held up, and what you would do differently, etc!
I’m still riding it today! I would use a larger compression wrap on the carbon fibre when it’s curing. In this video I used electrical tape wrapped sticky side out, I would try to find some 3” wide tape if I was to do this again
@@prematureYeet right on, thanks for the response! I'll keep that in mind.
@@prematureYeet WOW Man. it should be a pride to ride that bike huh.
Zeiss liquid ( optical shops) soak for a while and then wipe, best of all.
where is the second part
Hello! My camera (318 zoom) has the opposite issue where the focus ring refuses to budge and the ring slid off after trying really hard to turn it :(( Any ideas on what to do? I was tempted to try WD40 on the outside but that feels too risky lol
You should be able to remove the lens the same way i have in this video, it sounds like something is jammed inside the ring
Hey , I just got the canon 518 but it has baterry corroison on the battery compartment at the top and im afraid it wont work. What are the chances it works if i clean it out? To my point of view it seems liks it's probably damaged but im not sure.
Hey hey, battery corrosion probably won’t affect the camera that much. Just make sure you clean the battery contacts.
@@prematureYeet Thank you !
Hey, I've just picked up one of these cameras and there is a triangle of metal inside the zoom portion of the lens. I can't quite tell if it is intentional or not. It almost looks like an aperture blade, but is fixed to a ring of metal that goes around the circumference of the inside of the lens. Do have this on your camera?
Hey I noticed this on my camera too, its completely normal and shouldn't affecting filming
@@prematureYeet nice one, thanks for letting me know!
Good song
Hello! I have the Canon 518 SV super 8-camera with a really corroded battery compartment. Do you know how to remove the handle for a deep clean? Note that this is the SV version with a firm grip :D
Hey there! I’m looking to purchase an 814 that has a bit of spider web mould, and think I might dissasemble the lens and give it a clean. Do you have any experience with 814s and do you think it would be similar? All good if you have no idea! Thanks ☺️
Hey hey, it should be almost the exact same process. The 814 just has a deeper zoom lens. I have another video where I clean the mold out of a Leica lens, check that video out. Soapy water will probably be your best bet.
Hey! Was this on the canon 518? Oh, and did you use any settings on the camera to expose correctly form 500T?
This was actually done with a the Braun Nizo 148 & 500T. My camera overexposed the film a lot, but 500T works really well overexposed.