Thank you guys this video helped more than the actual ikia assembly view . There video is just grabbing parts from no where and 26 minutes long . Thanks again grate content, you should make more helpful videos like this . God bless you and your family.
@tofutti64222 күн бұрын
Piece of advice/feedback: get rid of the music
@KabavkazАй бұрын
Thanks man. Good quality video.
@saradagarcia68292 ай бұрын
did you know the name of the piece that unites the keys from the bottom?
@beautifulness142 ай бұрын
Thank you for this!!!
@barbz64232 ай бұрын
I can't get the nut off the old faucet. Basin wrench doesn't grab it. 😕
@cherokeesprings3 ай бұрын
Great video at a great pace. My only question was when you reconnected the shut-off valve. You hurried through that just a tad and left a bit of a great area. It's second nature to those who know what they're doing, but to those of us who are Step 1, Step 2, Step 3...we need arrows and crayons and pictures. LOL
@truecannon49222 ай бұрын
Have you tried slowing down the playback speed mode in the settings? Hope that helps
@gunmetlx79173 ай бұрын
Ruger
@kymbates4655 ай бұрын
I'm about to buy this exact set and wanted to see it built first! Thanks guys ❤
@kilis38046 ай бұрын
No muss no fuss. Perfect how to video. Thank you.
@Thoughtsbyjess7716 ай бұрын
Thank you for this video. I’m stuck how to attach the bracket to the bookshelf to attach to the wall? Do I drill a hole? But then a hole will show at the top.
@cynthiawolf24676 ай бұрын
Thank you for this video. It is EXACTLY what I needed. I was so intimidated to do this myself but you took all the mystery out of it. Much appreciation.
@msamydoodle7 ай бұрын
Can i use something else if i dont have a basin wrench?
@davidlucier5847 ай бұрын
Nice!👍🏻
@AFoxologist8 ай бұрын
I like how you added the spray foam at the end. Other videos I watched, they just left space around the pipes open.
@RomanNikitchenko9 ай бұрын
Thank you a lot, definitely saved me some time! And probably prevented this mistake with smaller / bigger drawer side panels :-). Seems really good for my goal!
@Lavenderlady2310 ай бұрын
This car seat is awful to set up
@Motleymoonglow6 ай бұрын
I tried setting up rear facing and you can’t. No matter how tight it is it’s always loose enough that if you hit a bump and it went forward at all the belt would immediately lose all tension and the car seat would be lose in your car banging around against the door and window.
@maxb276811 ай бұрын
Nice work!! How many pallets did you end up using? I want to make this.
@pumpkinpie526511 ай бұрын
Omg, thank you so much for such a detail teaching, I will let you know if I made it 😅
@graciangelio Жыл бұрын
Hello. Do you happen to have a manual for that machine. I have some but none of the came with the manual. Any help will be appreciated. Thank you
@vance1704 Жыл бұрын
Found it here's the link to download it: drive.google.com/file/d/1Nb69AjL4Cl_en8fJiZ2MM0KiSPjs9xe3/view?usp=sharing
@julieschopp9556 Жыл бұрын
how long is the tether strap? My tether latch is UNDER my Honda Odessy seat.
@loricollins1671 Жыл бұрын
Thank you for doing this video. I'm going to give this a try this weekend!!
@wynnewigderson2709 Жыл бұрын
Ammm..which way is hot & which way is cold on the little one handle on side?
@user-nk9sw1nx9h Жыл бұрын
How much time did it took to assemble it?
@dominikjukic8725 Жыл бұрын
what to do when the button to switch between the shower function and solid stream function leaves you with something in between when you press it
@iffyj6906 Жыл бұрын
Hey thank you so just order 3 single billys correct?
@johnnysalter7072 Жыл бұрын
It takes about 5 minutes to assemble if you know how to do it. It is so narrow I am afraid to lay in it, but I did lay bin it but it sagged nearly to floor, IN fell over backward and it hurt my wrist..
@pattyactually7536 Жыл бұрын
Thank you for sharing
@minimalsayan. Жыл бұрын
Are drill machines necessary for the installing process?
@seulgikang1539 Жыл бұрын
no
@tulanfromnowhere Жыл бұрын
Omg you are life savers thank you for this video as I just bought a kullen today! Also wanted to know do y’all think it’s sturdy enough to handle a 65” TV? I’m nervous about putting my TV on it hmmm 😅
@Ka-Chow-Cruisin Жыл бұрын
We don’t have a TV on it in my son’s room. But I think it could work as a TV stand it’s pretty sturdy. Did you end up trying to put a TV on it?
@RAHHicecream Жыл бұрын
How do you secure the corner piece to the wall??
@vance1704 Жыл бұрын
I have the two outer bookshelves secured to the wall. The center bookcase is connected to the outer bookshelves with the connecting kit, which keeps them all together. It is very stable and secure, but I wouldn’t try to climb up it.
@RAHHicecream Жыл бұрын
@@vance1704 I’m trying to do just the corner piece. Just a skinny shelf in the corner and I’m worried I won’t be able to secure it to the wall. Wish me luck
@turkersubasi Жыл бұрын
i was doubtful because of the ropes and how they hang together does it swings smoothly?
@vance1704 Жыл бұрын
Yes it’s very smooth
@AngelaMariaCastilloRamirezz Жыл бұрын
Thank youuuu!
@death_block0927 Жыл бұрын
thank god
@ArunaiGentori Жыл бұрын
Nice edit, like! Can you help me please? Is it possible put this shelf into 80cm wide corner? I don't understand perspective in the manual, little bit confused for me. Or it is 93cm wide? Thx
@vance1704 Жыл бұрын
The Billy Bookshelves in the video are 40cm wide and 202cm tall. Ikea also makes Billy Bookshelves that are 80cm wide. Hope that helps.
@levieastman6252 Жыл бұрын
Shoukda put a soap thing in where the sprayer was
@Miss.Lashayy_36 Жыл бұрын
Does it start from a newborn size
@vance1704 Жыл бұрын
That’s car seat starts from 5lbs and up
@aridilan5485 Жыл бұрын
Why u need that music ?
@xNecromancerxxx Жыл бұрын
Am I the only one that was brought here by Deadpool?
@aurematic Жыл бұрын
This is hot a furniture for a loner like me
@TUBESPECIFIC1 Жыл бұрын
That looks like the cure to runny mold nose. We need guys like you as apartment maintenance guys! I just don't have tools.
@erey2144 ай бұрын
Buy some
@leonardovilchez9363 Жыл бұрын
This is the worst tutorial I have seen.
@GaleMarie Жыл бұрын
Thanks for this video...Could you help me with a question I have? Do you know if it would it be possible to assemble these bookcases WITHOUT the middle stationary shelves? Would they still be sturdy enough without the middle shelves? I want to use these bookcases for hanging some long items, and I'm wondering if it's possible to leave out a middle stationary shelf and insert a rod up underneath the top stationary piece so that the long items can hang down...
@vance1704 Жыл бұрын
After looking at it, I believe it "might be" possible to use it without the stationary shelf that's in the center. If it were me, I would test how sturdy it is after assembly and most likely secure it to the wall with a bracket to help prevent it from tipping. Let me know if you give it a try. I'm curious to find out.
@GaleMarie Жыл бұрын
@@vance1704 Thank you! I am hoping that securing it to the wall might help keep it secure...I will attempt this project soon and update you! Thanks again...
@dominique9654 Жыл бұрын
I just changed my own faucet, never thought I could do it myself! Thank you!!!!!
@jeffmcguire2497 Жыл бұрын
Kill the music man!! Whew!
@unknownboo8738 Жыл бұрын
Thank you so much for this!
@sar_e_bear2 жыл бұрын
Your pittie is adorable!!! Thanks for the video. I will be doing this, this weekend.
@jfrederick712 жыл бұрын
I know this is a few years old - but TG for KZread :) thank you for sharing this. I've wanted to upgrade my 30+ year old sink faucet with something a little more modern but I wasn't sure what i was supposed to do with the Hot/Cold faucet holes in the sink. Now I'm confident I can do it all by myself.
@aaronrodden81212 жыл бұрын
An option for the pipes is if your a plumber, disconnect all supply/drain lines, scribe around where's they are supposed to be at, slip your new board over them and down, then reconnect water/drain lines and no more bitching about loctite lol!
@guillermoortiz14922 жыл бұрын
How has been the reliability? Recommend to tak camping?
@vance17042 жыл бұрын
We’ve had it for about 2 years and it’s been great for us.
Пікірлер
Thank you guys this video helped more than the actual ikia assembly view . There video is just grabbing parts from no where and 26 minutes long . Thanks again grate content, you should make more helpful videos like this . God bless you and your family.
Piece of advice/feedback: get rid of the music
Thanks man. Good quality video.
did you know the name of the piece that unites the keys from the bottom?
Thank you for this!!!
I can't get the nut off the old faucet. Basin wrench doesn't grab it. 😕
Great video at a great pace. My only question was when you reconnected the shut-off valve. You hurried through that just a tad and left a bit of a great area. It's second nature to those who know what they're doing, but to those of us who are Step 1, Step 2, Step 3...we need arrows and crayons and pictures. LOL
Have you tried slowing down the playback speed mode in the settings? Hope that helps
Ruger
I'm about to buy this exact set and wanted to see it built first! Thanks guys ❤
No muss no fuss. Perfect how to video. Thank you.
Thank you for this video. I’m stuck how to attach the bracket to the bookshelf to attach to the wall? Do I drill a hole? But then a hole will show at the top.
Thank you for this video. It is EXACTLY what I needed. I was so intimidated to do this myself but you took all the mystery out of it. Much appreciation.
Can i use something else if i dont have a basin wrench?
Nice!👍🏻
I like how you added the spray foam at the end. Other videos I watched, they just left space around the pipes open.
Thank you a lot, definitely saved me some time! And probably prevented this mistake with smaller / bigger drawer side panels :-). Seems really good for my goal!
This car seat is awful to set up
I tried setting up rear facing and you can’t. No matter how tight it is it’s always loose enough that if you hit a bump and it went forward at all the belt would immediately lose all tension and the car seat would be lose in your car banging around against the door and window.
Nice work!! How many pallets did you end up using? I want to make this.
Omg, thank you so much for such a detail teaching, I will let you know if I made it 😅
Hello. Do you happen to have a manual for that machine. I have some but none of the came with the manual. Any help will be appreciated. Thank you
Found it here's the link to download it: drive.google.com/file/d/1Nb69AjL4Cl_en8fJiZ2MM0KiSPjs9xe3/view?usp=sharing
how long is the tether strap? My tether latch is UNDER my Honda Odessy seat.
Thank you for doing this video. I'm going to give this a try this weekend!!
Ammm..which way is hot & which way is cold on the little one handle on side?
How much time did it took to assemble it?
what to do when the button to switch between the shower function and solid stream function leaves you with something in between when you press it
Hey thank you so just order 3 single billys correct?
It takes about 5 minutes to assemble if you know how to do it. It is so narrow I am afraid to lay in it, but I did lay bin it but it sagged nearly to floor, IN fell over backward and it hurt my wrist..
Thank you for sharing
Are drill machines necessary for the installing process?
no
Omg you are life savers thank you for this video as I just bought a kullen today! Also wanted to know do y’all think it’s sturdy enough to handle a 65” TV? I’m nervous about putting my TV on it hmmm 😅
We don’t have a TV on it in my son’s room. But I think it could work as a TV stand it’s pretty sturdy. Did you end up trying to put a TV on it?
How do you secure the corner piece to the wall??
I have the two outer bookshelves secured to the wall. The center bookcase is connected to the outer bookshelves with the connecting kit, which keeps them all together. It is very stable and secure, but I wouldn’t try to climb up it.
@@vance1704 I’m trying to do just the corner piece. Just a skinny shelf in the corner and I’m worried I won’t be able to secure it to the wall. Wish me luck
i was doubtful because of the ropes and how they hang together does it swings smoothly?
Yes it’s very smooth
Thank youuuu!
thank god
Nice edit, like! Can you help me please? Is it possible put this shelf into 80cm wide corner? I don't understand perspective in the manual, little bit confused for me. Or it is 93cm wide? Thx
The Billy Bookshelves in the video are 40cm wide and 202cm tall. Ikea also makes Billy Bookshelves that are 80cm wide. Hope that helps.
Shoukda put a soap thing in where the sprayer was
Does it start from a newborn size
That’s car seat starts from 5lbs and up
Why u need that music ?
Am I the only one that was brought here by Deadpool?
This is hot a furniture for a loner like me
That looks like the cure to runny mold nose. We need guys like you as apartment maintenance guys! I just don't have tools.
Buy some
This is the worst tutorial I have seen.
Thanks for this video...Could you help me with a question I have? Do you know if it would it be possible to assemble these bookcases WITHOUT the middle stationary shelves? Would they still be sturdy enough without the middle shelves? I want to use these bookcases for hanging some long items, and I'm wondering if it's possible to leave out a middle stationary shelf and insert a rod up underneath the top stationary piece so that the long items can hang down...
After looking at it, I believe it "might be" possible to use it without the stationary shelf that's in the center. If it were me, I would test how sturdy it is after assembly and most likely secure it to the wall with a bracket to help prevent it from tipping. Let me know if you give it a try. I'm curious to find out.
@@vance1704 Thank you! I am hoping that securing it to the wall might help keep it secure...I will attempt this project soon and update you! Thanks again...
I just changed my own faucet, never thought I could do it myself! Thank you!!!!!
Kill the music man!! Whew!
Thank you so much for this!
Your pittie is adorable!!! Thanks for the video. I will be doing this, this weekend.
I know this is a few years old - but TG for KZread :) thank you for sharing this. I've wanted to upgrade my 30+ year old sink faucet with something a little more modern but I wasn't sure what i was supposed to do with the Hot/Cold faucet holes in the sink. Now I'm confident I can do it all by myself.
An option for the pipes is if your a plumber, disconnect all supply/drain lines, scribe around where's they are supposed to be at, slip your new board over them and down, then reconnect water/drain lines and no more bitching about loctite lol!
How has been the reliability? Recommend to tak camping?
We’ve had it for about 2 years and it’s been great for us.